! Started logfile: /vlbi/uf001/uvm//J0334-4008_X_b_dfm.log on Sun Jan 13 20:41:03 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uvm//J0334-4008_X_b_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J0334-4008_X_b_uvm.fits ! AN table 1: 7 integrations on 15 of 15 possible baselines. ! AN table 2: 15 integrations on 10 of 10 possible baselines. ! AN table 3: 8 integrations on 15 of 15 possible baselines. ! AN table 4: 7 integrations on 15 of 15 possible baselines. ! Apparent sampling: 0.904167 visibilities/baseline/integration-bin. ! Found source: J0334-4008 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 5208 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0334-4008_X_b] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 17 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 3. ! A total of 12 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 2. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 17 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 3. ! A total of 12 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 3. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 17 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 3. ! A total of 12 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 4. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 17 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 3. ! A total of 12 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 5. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 17 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 3. ! A total of 12 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 6. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 17 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 3. ! A total of 12 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 7. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 17 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 3. ! A total of 12 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 8. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 17 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 3. ! A total of 12 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 9. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 17 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 3. ! A total of 12 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 10. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 17 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 3. ! A total of 12 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 11. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 17 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 3. ! A total of 12 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 12. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 17 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 3. ! A total of 12 telescope corrections were flagged in sub-array 4. ! ! Fit before self-cal, rms=1.187371Jy sigma=14.366370 ! Fit after self-cal, rms=0.522825Jy sigma=5.459430 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7774 mas, bmaj=6.715 mas, bpa=-16.57 degrees ! Estimated noise=1.7393 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.382219 Jy ! Component: 100 - total flux cleaned = 0.521873 Jy ! Total flux subtracted in 100 components = 0.521873 Jy ! Clean residual min=-0.035743 max=0.071436 Jy/beam ! Clean residual mean=0.000219 rms=0.013573 Jy/beam ! Combined flux in latest and established models = 0.521873 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.521873 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.259502Jy sigma=3.178794 ! Fit after self-cal, rms=0.259281Jy sigma=3.177920 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.015 mas, bmaj=8.006 mas, bpa=-16.17 degrees ! Estimated noise=0.943208 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.161814 Jy ! Component: 100 - total flux cleaned = 0.255128 Jy ! Component: 150 - total flux cleaned = 0.313434 Jy ! Component: 200 - total flux cleaned = 0.352219 Jy ! Total flux subtracted in 200 components = 0.352219 Jy ! Clean residual min=-0.025011 max=0.025032 Jy/beam ! Clean residual mean=0.000019 rms=0.007035 Jy/beam ! Combined flux in latest and established models = 0.874092 Jy ! Performing phase self-cal ! Adding 101 model components to the UV plane model. ! The established model now contains 124 components and 0.874092 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.138909Jy sigma=1.469873 ! Fit after self-cal, rms=0.138569Jy sigma=1.467579 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.015 x 8.006 at -16.17 degrees (North through East) ! Clean map min=-0.024243 max=0.52585 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.92 HN 1.12 KP 0.91 LA 0.99 ! NL 1.16 PT 0.96 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 0.99 HN 1.16 KP 0.94 LA 1.00 ! NL 1.10 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.93 KP 0.92 LA 0.99 MK 1.05 ! NL 1.27 PT 0.92 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.93 HN 1.25 KP 1.01 LA 0.98 ! NL 1.28 OV 0.76 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 0.90 HN 1.11 KP 0.95 LA 1.01 ! NL 1.15 PT 0.95 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 1.09 HN 1.32 KP 0.88 LA 0.99 ! NL 1.05 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.94 KP 0.92 LA 1.02 MK 1.04 ! NL 1.22 PT 0.93 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.92 HN 1.06 KP 1.03 LA 0.98 ! NL 1.17 OV 0.78 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 0.94 HN 1.17 KP 0.94 LA 0.98 ! NL 1.18 PT 0.95 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 1.01 HN 1.28 KP 0.90 LA 1.02 ! NL 1.03 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.93 KP 0.90 LA 1.02 MK 1.07 ! NL 1.22 PT 0.94 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.91 HN 0.94 KP 1.05 LA 0.99 ! NL 1.22 OV 0.77 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 0.92 HN 1.15 KP 0.92 LA 1.00 ! NL 1.13 PT 0.93 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 1.06 HN 1.30 KP 0.87 LA 1.02 ! NL 1.07 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.94 KP 0.93 LA 1.01 MK 1.04 ! NL 1.23 PT 0.93 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.94 HN 1.34 KP 1.02 LA 0.99 ! NL 1.23 OV 0.76 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! FD 0.93 HN 1.31 KP 0.91 LA 0.96 ! NL 1.14 PT 0.96 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 1.04 HN 1.17 KP 0.89 LA 1.01 ! NL 1.03 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.94 KP 0.92 LA 1.01 MK 1.04 ! NL 1.20 PT 0.93 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.98 HN 1.09 KP 1.03 LA 1.00 ! NL 1.16 OV 0.77 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! FD 0.94 HN 1.00 KP 0.89 LA 0.97 ! NL 1.11 PT 0.95 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 1.03 HN 1.13 KP 0.90 LA 0.98 ! NL 1.07 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.93 KP 0.93 LA 1.01 MK 1.05 ! NL 1.28 PT 0.93 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.93 HN 1.18 KP 1.01 LA 1.00 ! NL 1.20 OV 0.77 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! FD 0.94 HN 1.11 KP 0.91 LA 1.01 ! NL 1.15 PT 0.95 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 1.01 HN 1.09 KP 0.89 LA 0.99 ! NL 1.11 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.95 KP 0.95 LA 1.01 MK 1.02 ! NL 1.19 PT 0.91 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.92 HN 1.16 KP 1.03 LA 1.02 ! NL 1.18 OV 0.77 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! FD 0.92 HN 1.09 KP 0.91 LA 1.01 ! NL 1.13 PT 0.93 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 1.02 HN 1.12 KP 0.89 LA 1.00 ! NL 1.02 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.97 KP 0.95 LA 1.00 MK 1.08 ! NL 1.23 PT 0.91 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.94 HN 1.21 KP 1.01 LA 1.03 ! NL 1.19 OV 0.77 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! FD 0.94 HN 1.01 KP 0.92 LA 0.99 ! NL 1.16 PT 0.95 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 1.07 HN 1.18 KP 0.90 LA 0.99 ! NL 1.06 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.95 KP 0.93 LA 1.01 MK 1.03 ! NL 1.21 PT 0.94 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.97 HN 1.01 KP 1.06 LA 0.99 ! NL 1.21 OV 0.76 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! FD 0.94 HN 1.16 KP 0.91 LA 0.97 ! NL 1.11 PT 0.95 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 1.05 HN 1.24 KP 0.90 LA 1.02 ! NL 1.12 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.94 KP 0.92 LA 1.03 MK 1.03 ! NL 1.21 PT 0.94 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.94 HN 1.06 KP 1.02 LA 0.99 ! NL 1.29 OV 0.78 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! FD 0.94 HN 1.03 KP 0.90 LA 0.96 ! NL 1.06 PT 0.95 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 1.06 HN 1.20 KP 0.89 LA 0.99 ! NL 1.07 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.95 KP 0.93 LA 1.02 MK 1.05 ! NL 1.26 PT 0.95 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.97 HN 1.49 KP 1.07 LA 1.02 ! NL 1.15 OV 0.76 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! FD 0.92 HN 1.05 KP 0.90 LA 0.98 ! NL 1.12 PT 0.95 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 1.01 HN 1.30 KP 0.88 LA 1.03 ! NL 1.10 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.94 KP 0.97 LA 0.99 MK 1.02 ! NL 1.20 PT 0.93 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.93 HN 1.21 KP 1.00 LA 0.97 ! NL 1.21 OV 0.79 ! ! ! Fit before self-cal, rms=0.138569Jy sigma=1.467579 ! Fit after self-cal, rms=0.126741Jy sigma=1.111263 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.039 mas, bmaj=8.155 mas, bpa=-16.34 degrees ! Estimated noise=0.950822 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0107524 Jy ! Component: 100 - total flux cleaned = -0.0111024 Jy ! Component: 150 - total flux cleaned = -0.0103463 Jy ! Component: 200 - total flux cleaned = -0.009673 Jy ! Total flux subtracted in 200 components = -0.009673 Jy ! Clean residual min=-0.012973 max=0.010183 Jy/beam ! Clean residual mean=-0.000005 rms=0.002922 Jy/beam ! Combined flux in latest and established models = 0.864419 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 138 components and 0.864419 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.125084Jy sigma=1.092320 ! Fit after self-cal, rms=0.125542Jy sigma=1.091794 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.125542Jy sigma=1.091794 ! Fit after self-cal, rms=0.127943Jy sigma=1.087133 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.042 mas, bmaj=8.206 mas, bpa=-16.42 degrees ! Estimated noise=0.957036 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00778404 Jy ! Component: 100 - total flux cleaned = -0.00826193 Jy ! Component: 150 - total flux cleaned = -0.00846675 Jy ! Component: 200 - total flux cleaned = -0.00814257 Jy ! Total flux subtracted in 200 components = -0.00814257 Jy ! Clean residual min=-0.011997 max=0.009030 Jy/beam ! Clean residual mean=-0.000004 rms=0.002730 Jy/beam ! Combined flux in latest and established models = 0.856277 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 143 components and 0.856277 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.127045Jy sigma=1.076114 ! Fit after self-cal, rms=0.127117Jy sigma=1.076060 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000592575 Jy ! Component: 100 - total flux cleaned = 0.00098819 Jy ! Component: 150 - total flux cleaned = 0.00122936 Jy ! Component: 200 - total flux cleaned = 0.00155702 Jy ! Total flux subtracted in 200 components = 0.00155702 Jy ! Clean residual min=-0.011830 max=0.008650 Jy/beam ! Clean residual mean=-0.000005 rms=0.002702 Jy/beam ! Combined flux in latest and established models = 0.857834 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 151 components and 0.857834 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.126855Jy sigma=1.073318 ! Fit after self-cal, rms=0.126875Jy sigma=1.073281 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.126875Jy sigma=1.073281 ! Fit after self-cal, rms=0.129332Jy sigma=1.059543 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.044 mas, bmaj=8.273 mas, bpa=-16.52 degrees ! Estimated noise=0.965487 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00537482 Jy ! Component: 100 - total flux cleaned = -0.00631006 Jy ! Component: 150 - total flux cleaned = -0.00661368 Jy ! Component: 200 - total flux cleaned = -0.00687527 Jy ! Total flux subtracted in 200 components = -0.00687527 Jy ! Clean residual min=-0.011011 max=0.007294 Jy/beam ! Clean residual mean=-0.000004 rms=0.002494 Jy/beam ! Combined flux in latest and established models = 0.850959 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 165 components and 0.850959 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.128884Jy sigma=1.052749 ! Fit after self-cal, rms=0.128949Jy sigma=1.052706 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000385578 Jy ! Component: 100 - total flux cleaned = -0.000485003 Jy ! Component: 150 - total flux cleaned = -0.000312122 Jy ! Component: 200 - total flux cleaned = -0.000153756 Jy ! Total flux subtracted in 200 components = -0.000153756 Jy ! Clean residual min=-0.010746 max=0.007266 Jy/beam ! Clean residual mean=-0.000005 rms=0.002475 Jy/beam ! Combined flux in latest and established models = 0.850805 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 173 components and 0.850805 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.128847Jy sigma=1.050903 ! Fit after self-cal, rms=0.128856Jy sigma=1.050866 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.128856Jy sigma=1.050866 ! Fit after self-cal, rms=0.130923Jy sigma=1.042239 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.479 mas, bmaj=14.94 mas, bpa=-9.941 degrees ! Estimated noise=1.06432 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00476456 Jy ! Component: 100 - total flux cleaned = -0.00560801 Jy ! Component: 150 - total flux cleaned = -0.00568742 Jy ! Component: 200 - total flux cleaned = -0.00575975 Jy ! Total flux subtracted in 200 components = -0.00575975 Jy ! Clean residual min=-0.011410 max=0.008274 Jy/beam ! Clean residual mean=-0.000008 rms=0.002984 Jy/beam ! Combined flux in latest and established models = 0.845045 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 185 components and 0.845045 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.130758Jy sigma=1.038762 ! Fit after self-cal, rms=0.130794Jy sigma=1.038416 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000374837 Jy ! Component: 100 - total flux cleaned = -0.000308043 Jy ! Component: 150 - total flux cleaned = -0.000365185 Jy ! Component: 200 - total flux cleaned = -0.000416753 Jy ! Total flux subtracted in 200 components = -0.000416753 Jy ! Clean residual min=-0.011455 max=0.008206 Jy/beam ! Clean residual mean=-0.000010 rms=0.002977 Jy/beam ! Combined flux in latest and established models = 0.844628 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 194 components and 0.844628 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.130766Jy sigma=1.037202 ! Fit after self-cal, rms=0.130772Jy sigma=1.037104 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.047 mas, bmaj=8.329 mas, bpa=-16.6 degrees ! Estimated noise=0.971236 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.047 x 8.329 at -16.6 degrees (North through East) ! Clean map min=-0.0097074 max=0.5196 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.130772Jy sigma=1.037104 ! Fit after self-cal, rms=0.145180Jy sigma=0.811938 ! Inverting map and beam ! Estimated beam: bmin=1.049 mas, bmaj=8.357 mas, bpa=-16.62 degrees ! Estimated noise=0.973789 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00482714 Jy ! Component: 100 - total flux cleaned = -0.00567952 Jy ! Component: 150 - total flux cleaned = -0.00616855 Jy ! Component: 200 - total flux cleaned = -0.0064057 Jy ! Total flux subtracted in 200 components = -0.0064057 Jy ! Clean residual min=-0.008975 max=0.006232 Jy/beam ! Clean residual mean=-0.000005 rms=0.002109 Jy/beam ! Combined flux in latest and established models = 0.838223 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 208 components and 0.838223 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.145066Jy sigma=0.807405 ! Fit after self-cal, rms=0.145055Jy sigma=0.807363 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000324483 Jy ! Component: 100 - total flux cleaned = -0.000507078 Jy ! Component: 150 - total flux cleaned = -0.000616561 Jy ! Component: 200 - total flux cleaned = -0.00076082 Jy ! Total flux subtracted in 200 components = -0.00076082 Jy ! Clean residual min=-0.008737 max=0.006107 Jy/beam ! Clean residual mean=-0.000005 rms=0.002092 Jy/beam ! Combined flux in latest and established models = 0.837462 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 217 components and 0.837462 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.145061Jy sigma=0.806150 ! Fit after self-cal, rms=0.145054Jy sigma=0.806131 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.145054Jy sigma=0.806131 ! Fit after self-cal, rms=0.149338Jy sigma=0.803800 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7811 mas, bmaj=6.986 mas, bpa=-17.1 degrees ! Estimated noise=1.88326 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.407435 Jy ! Component: 100 - total flux cleaned = 0.539996 Jy ! Component: 150 - total flux cleaned = 0.614299 Jy ! Component: 200 - total flux cleaned = 0.664625 Jy ! Total flux subtracted in 200 components = 0.664625 Jy ! Clean residual min=-0.015654 max=0.027798 Jy/beam ! Clean residual mean=0.000057 rms=0.005578 Jy/beam ! Combined flux in latest and established models = 0.664625 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 53 model components to the UV plane model. ! The established model now contains 53 components and 0.664625 Jy ! Inverting map and beam ! Estimated beam: bmin=1.051 mas, bmaj=8.401 mas, bpa=-16.68 degrees ! Estimated noise=0.977151 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0630397 Jy ! Component: 100 - total flux cleaned = 0.0982157 Jy ! Component: 150 - total flux cleaned = 0.12006 Jy ! Component: 200 - total flux cleaned = 0.134241 Jy ! Total flux subtracted in 200 components = 0.134241 Jy ! Clean residual min=-0.008696 max=0.010677 Jy/beam ! Clean residual mean=0.000013 rms=0.002511 Jy/beam ! Combined flux in latest and established models = 0.798866 Jy ! Adding 80 model components to the UV plane model. ! The established model now contains 124 components and 0.798866 Jy ! Inverting map ! Added new window around map position (-2.6, -0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0109884 Jy ! Component: 100 - total flux cleaned = 0.0170105 Jy ! Component: 150 - total flux cleaned = 0.0209613 Jy ! Component: 200 - total flux cleaned = 0.0240142 Jy ! Total flux subtracted in 200 components = 0.0240142 Jy ! Clean residual min=-0.007692 max=0.005673 Jy/beam ! Clean residual mean=-0.000003 rms=0.001930 Jy/beam ! Combined flux in latest and established models = 0.822881 Jy ! Adding 59 model components to the UV plane model. ! The established model now contains 180 components and 0.822881 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.506 mas, bmaj=15.01 mas, bpa=-9.981 degrees ! Estimated noise=1.06318 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00452852 Jy ! Component: 100 - total flux cleaned = 0.00668275 Jy ! Component: 150 - total flux cleaned = 0.00792661 Jy ! Component: 200 - total flux cleaned = 0.00871942 Jy ! Total flux subtracted in 200 components = 0.00871942 Jy ! Clean residual min=-0.008552 max=0.006604 Jy/beam ! Clean residual mean=-0.000014 rms=0.002394 Jy/beam ! Combined flux in latest and established models = 0.8316 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.93851e-05 Jy ! Component: 100 - total flux cleaned = 0.000268292 Jy ! Component: 150 - total flux cleaned = 0.000515969 Jy ! Component: 200 - total flux cleaned = 0.000751175 Jy ! Total flux subtracted in 200 components = 0.000751175 Jy ! Clean residual min=-0.008307 max=0.006734 Jy/beam ! Clean residual mean=-0.000015 rms=0.002376 Jy/beam ! Combined flux in latest and established models = 0.832351 Jy ! Adding 61 model components to the UV plane model. ! The established model now contains 224 components and 0.832351 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.051 mas, bmaj=8.401 mas, bpa=-16.68 degrees ! Estimated noise=0.977151 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000148481 Jy ! Component: 100 - total flux cleaned = -0.000147247 Jy ! Component: 150 - total flux cleaned = -0.000243004 Jy ! Component: 200 - total flux cleaned = -0.000150847 Jy ! Total flux subtracted in 200 components = -0.000150847 Jy ! Clean residual min=-0.006978 max=0.006051 Jy/beam ! Clean residual mean=-0.000011 rms=0.001830 Jy/beam ! Combined flux in latest and established models = 0.8322 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 252 components and 0.8322 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.149546Jy sigma=0.793643 ! Fit after self-cal, rms=0.149378Jy sigma=0.793038 wmodel J0334-4008_X_b_map.mod ! Writing 252 model components to file: J0334-4008_X_b_map.mod wobs J0334-4008_X_b_uvs.fits ! Writing UV FITS file: J0334-4008_X_b_uvs.fits wwins J0334-4008_X_b_map.win ! wwins: Wrote 2 windows to J0334-4008_X_b_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00290548 Jy ! Component: 100 - total flux cleaned = -0.00492197 Jy ! Component: 150 - total flux cleaned = -0.00688484 Jy ! Component: 200 - total flux cleaned = -0.00861564 Jy ! Component: 250 - total flux cleaned = -0.0100605 Jy ! Component: 300 - total flux cleaned = -0.0110937 Jy ! Component: 350 - total flux cleaned = -0.0117547 Jy ! Component: 400 - total flux cleaned = -0.0125476 Jy ! Component: 450 - total flux cleaned = -0.012856 Jy ! Component: 500 - total flux cleaned = -0.0131548 Jy ! Component: 550 - total flux cleaned = -0.0134449 Jy ! Component: 600 - total flux cleaned = -0.0138689 Jy ! Component: 650 - total flux cleaned = -0.0144202 Jy ! Component: 700 - total flux cleaned = -0.0149596 Jy ! Component: 750 - total flux cleaned = -0.0154208 Jy ! Component: 800 - total flux cleaned = -0.0158067 Jy ! Component: 850 - total flux cleaned = -0.0160584 Jy ! Component: 900 - total flux cleaned = -0.0163679 Jy ! Component: 950 - total flux cleaned = -0.016791 Jy ! Component: 1000 - total flux cleaned = -0.016909 Jy ! Component: 1050 - total flux cleaned = -0.0170848 Jy ! Component: 1100 - total flux cleaned = -0.0173138 Jy ! Component: 1150 - total flux cleaned = -0.0173701 Jy ! Component: 1200 - total flux cleaned = -0.0174805 Jy ! Component: 1250 - total flux cleaned = -0.0176441 Jy ! Component: 1300 - total flux cleaned = -0.0176991 Jy ! Component: 1350 - total flux cleaned = -0.017857 Jy ! Component: 1400 - total flux cleaned = -0.017858 Jy ! Component: 1450 - total flux cleaned = -0.0177561 Jy ! Component: 1500 - total flux cleaned = -0.0179066 Jy ! Component: 1550 - total flux cleaned = -0.017857 Jy ! Component: 1600 - total flux cleaned = -0.0179064 Jy ! Component: 1650 - total flux cleaned = -0.0179063 Jy ! Component: 1700 - total flux cleaned = -0.0179064 Jy ! Component: 1750 - total flux cleaned = -0.0178592 Jy ! Component: 1800 - total flux cleaned = -0.0178124 Jy ! Component: 1850 - total flux cleaned = -0.0177194 Jy ! Component: 1900 - total flux cleaned = -0.0176735 Jy ! Component: 1950 - total flux cleaned = -0.0176729 Jy ! Component: 2000 - total flux cleaned = -0.0176285 Jy ! Component: 2050 - total flux cleaned = -0.0174981 Jy ! Component: 2100 - total flux cleaned = -0.0174979 Jy ! Component: 2150 - total flux cleaned = -0.01754 Jy ! Component: 2200 - total flux cleaned = -0.0174554 Jy ! Component: 2250 - total flux cleaned = -0.017289 Jy ! Component: 2300 - total flux cleaned = -0.0171661 Jy ! Component: 2350 - total flux cleaned = -0.0171259 Jy ! Component: 2400 - total flux cleaned = -0.0168854 Jy ! Component: 2450 - total flux cleaned = -0.0167266 Jy ! Component: 2500 - total flux cleaned = -0.0165699 Jy ! Component: 2550 - total flux cleaned = -0.0164919 Jy ! Component: 2600 - total flux cleaned = -0.0162606 Jy ! Component: 2650 - total flux cleaned = -0.01607 Jy ! Component: 2700 - total flux cleaned = -0.0159942 Jy ! Component: 2750 - total flux cleaned = -0.0156946 Jy ! Component: 2800 - total flux cleaned = -0.0155835 Jy ! Component: 2850 - total flux cleaned = -0.0154001 Jy ! Component: 2900 - total flux cleaned = -0.0153279 Jy ! Component: 2950 - total flux cleaned = -0.0152195 Jy ! Component: 3000 - total flux cleaned = -0.0151836 Jy ! Component: 3050 - total flux cleaned = -0.0151128 Jy ! Component: 3100 - total flux cleaned = -0.0150074 Jy ! Component: 3150 - total flux cleaned = -0.0147993 Jy ! Component: 3200 - total flux cleaned = -0.0146966 Jy ! Component: 3250 - total flux cleaned = -0.0145946 Jy ! Component: 3300 - total flux cleaned = -0.0144934 Jy ! Component: 3350 - total flux cleaned = -0.0144598 Jy ! Component: 3400 - total flux cleaned = -0.0143273 Jy ! Component: 3450 - total flux cleaned = -0.0143274 Jy ! Component: 3500 - total flux cleaned = -0.0142296 Jy ! Component: 3550 - total flux cleaned = -0.0141967 Jy ! Component: 3600 - total flux cleaned = -0.0140046 Jy ! Component: 3650 - total flux cleaned = -0.014068 Jy ! Component: 3700 - total flux cleaned = -0.0140677 Jy ! Component: 3750 - total flux cleaned = -0.0139422 Jy ! Component: 3800 - total flux cleaned = -0.013911 Jy ! Component: 3850 - total flux cleaned = -0.0137879 Jy ! Component: 3900 - total flux cleaned = -0.0136661 Jy ! Component: 3950 - total flux cleaned = -0.0137272 Jy ! Component: 4000 - total flux cleaned = -0.0137868 Jy ! Component: 4050 - total flux cleaned = -0.0137868 Jy ! Total flux subtracted in 4096 components = -0.0138165 Jy ! Clean residual min=-0.001543 max=0.001960 Jy/beam ! Clean residual mean=0.000004 rms=0.000620 Jy/beam ! Combined flux in latest and established models = 0.818384 Jy keep ! Adding 368 model components to the UV plane model. ! The established model now contains 617 components and 0.818384 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J0334-4008_X_b_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.051 x 8.401 at -16.68 degrees (North through East) ! Clean map min=-0.0064438 max=0.54206 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J0334-4008_X_b_map.fits wmodel /vlbi/uf001/uvm//J0334-4008_X_b_map.mod ! Writing 617 model components to file: /vlbi/uf001/uvm//J0334-4008_X_b_map.mod wobs /vlbi/uf001/uvm//J0334-4008_X_b_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J0334-4008_X_b_uvs.fits wwins /vlbi/uf001/uvm//J0334-4008_X_b_map.win ! wwins: Wrote 3 windows to /vlbi/uf001/uvm//J0334-4008_X_b_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.542056 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000609116 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.337115 0.337115 0.67423 1.34846 2.69692 5.39384 10.7877 21.5753 43.1507 86.3014 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.542 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 889.904 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J0334-4008_X_b_dfm.log closed on Sun Jan 13 20:41:08 2019