! Started logfile: /vlbi/uf001/uva//J0331-1051_S_dfm.log on Sun Jan 13 21:50:40 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /vlbi/uf001/uva//J0331-1051_S_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J0331-1051_S_uva.fits ! AN table 1: 38 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.993734 visibilities/baseline/integration-bin. ! Found source: J0331-1051 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 40 lines of history. ! ! Reading 2379 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0331-1051_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=1.055562Jy sigma=22.136876 ! Fit after self-cal, rms=0.663640Jy sigma=14.052145 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.647 mas, bmaj=28.04 mas, bpa=-11.32 degrees ! Estimated noise=0.948682 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.256661 Jy ! Component: 100 - total flux cleaned = 0.319044 Jy ! Total flux subtracted in 100 components = 0.319044 Jy ! Clean residual min=-0.014536 max=0.026001 Jy/beam ! Clean residual mean=-0.000014 rms=0.005008 Jy/beam ! Combined flux in latest and established models = 0.319044 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.319044 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.077689Jy sigma=1.575278 ! Fit after self-cal, rms=0.077675Jy sigma=1.574972 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.539 mas, bmaj=27 mas, bpa=-11.01 degrees ! Estimated noise=0.70379 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0310823 Jy ! Component: 100 - total flux cleaned = 0.0462522 Jy ! Component: 150 - total flux cleaned = 0.0560046 Jy ! Component: 200 - total flux cleaned = 0.0629257 Jy ! Total flux subtracted in 200 components = 0.0629257 Jy ! Clean residual min=-0.010343 max=0.009216 Jy/beam ! Clean residual mean=-0.000022 rms=0.002738 Jy/beam ! Combined flux in latest and established models = 0.38197 Jy ! Performing phase self-cal ! Adding 97 model components to the UV plane model. ! The established model now contains 109 components and 0.38197 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063879Jy sigma=1.308871 ! Fit after self-cal, rms=0.063820Jy sigma=1.307816 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.539 x 27 at -11.01 degrees (North through East) ! Clean map min=-0.010283 max=0.33703 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.01 HN 1.01 KP 1.01 LA 0.92 ! NL 1.04 OV 0.99 PT 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 1.02 HN 1.04 KP 1.00 LA 0.92 ! NL 1.02 OV 0.96 PT 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 1.03 HN 1.03 KP 1.01 LA 0.92 ! NL 1.03 OV 1.01 PT 1.01 ! ! ! Fit before self-cal, rms=0.063820Jy sigma=1.307816 ! Fit after self-cal, rms=0.061386Jy sigma=1.258184 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.583 mas, bmaj=27.11 mas, bpa=-10.91 degrees ! Estimated noise=0.703694 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00298615 Jy ! Component: 100 - total flux cleaned = 0.00309275 Jy ! Component: 150 - total flux cleaned = 0.0028257 Jy ! Component: 200 - total flux cleaned = 0.0028248 Jy ! Total flux subtracted in 200 components = 0.0028248 Jy ! Clean residual min=-0.007299 max=0.007376 Jy/beam ! Clean residual mean=-0.000026 rms=0.002000 Jy/beam ! Combined flux in latest and established models = 0.384795 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 135 components and 0.384795 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.061102Jy sigma=1.250496 ! Fit after self-cal, rms=0.061089Jy sigma=1.250182 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.061089Jy sigma=1.250182 ! Fit after self-cal, rms=0.059460Jy sigma=1.202369 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.575 mas, bmaj=27.18 mas, bpa=-10.97 degrees ! Estimated noise=0.705892 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000245419 Jy ! Component: 100 - total flux cleaned = -0.000105324 Jy ! Component: 150 - total flux cleaned = -0.000458214 Jy ! Component: 200 - total flux cleaned = -0.000665742 Jy ! Total flux subtracted in 200 components = -0.000665742 Jy ! Clean residual min=-0.003228 max=0.004465 Jy/beam ! Clean residual mean=-0.000006 rms=0.001008 Jy/beam ! Combined flux in latest and established models = 0.384129 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 160 components and 0.384129 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.059388Jy sigma=1.200723 ! Fit after self-cal, rms=0.059389Jy sigma=1.200580 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-20, -78). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00417369 Jy ! Component: 100 - total flux cleaned = 0.005725 Jy ! Component: 150 - total flux cleaned = 0.00669611 Jy ! Component: 200 - total flux cleaned = 0.00692299 Jy ! Total flux subtracted in 200 components = 0.00692299 Jy ! Clean residual min=-0.002973 max=0.002584 Jy/beam ! Clean residual mean=-0.000001 rms=0.000755 Jy/beam ! Combined flux in latest and established models = 0.391052 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 193 components and 0.391052 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.059058Jy sigma=1.193593 ! Fit after self-cal, rms=0.059044Jy sigma=1.193295 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.059044Jy sigma=1.193295 ! Fit after self-cal, rms=0.059010Jy sigma=1.192675 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.574 mas, bmaj=27.15 mas, bpa=-10.95 degrees ! Estimated noise=0.705319 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000789617 Jy ! Component: 100 - total flux cleaned = 0.00131012 Jy ! Component: 150 - total flux cleaned = 0.0014445 Jy ! Component: 200 - total flux cleaned = 0.00160863 Jy ! Total flux subtracted in 200 components = 0.00160863 Jy ! Clean residual min=-0.002382 max=0.002396 Jy/beam ! Clean residual mean=-0.000000 rms=0.000645 Jy/beam ! Combined flux in latest and established models = 0.392661 Jy selfcal ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 228 components and 0.392661 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.058929Jy sigma=1.191146 ! Fit after self-cal, rms=0.058929Jy sigma=1.191101 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000179967 Jy ! Component: 100 - total flux cleaned = 0.000105622 Jy ! Component: 150 - total flux cleaned = 0.000105478 Jy ! Component: 200 - total flux cleaned = 0.000104932 Jy ! Total flux subtracted in 200 components = 0.000104932 Jy ! Clean residual min=-0.002223 max=0.002295 Jy/beam ! Clean residual mean=-0.000000 rms=0.000605 Jy/beam ! Combined flux in latest and established models = 0.392765 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 254 components and 0.392766 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.058890Jy sigma=1.190402 ! Fit after self-cal, rms=0.058890Jy sigma=1.190380 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.058890Jy sigma=1.190380 ! Fit after self-cal, rms=0.058861Jy sigma=1.190212 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.966 mas, bmaj=26.62 mas, bpa=-10.22 degrees ! Estimated noise=0.761755 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000185424 Jy ! Component: 100 - total flux cleaned = 0.000446026 Jy ! Component: 150 - total flux cleaned = 0.000448229 Jy ! Component: 200 - total flux cleaned = 0.000373399 Jy ! Total flux subtracted in 200 components = 0.000373399 Jy ! Clean residual min=-0.002206 max=0.002187 Jy/beam ! Clean residual mean=0.000000 rms=0.000618 Jy/beam ! Combined flux in latest and established models = 0.393139 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 285 components and 0.393139 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.058834Jy sigma=1.189788 ! Fit after self-cal, rms=0.058834Jy sigma=1.189765 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.50639e-05 Jy ! Component: 100 - total flux cleaned = 1.19063e-05 Jy ! Component: 150 - total flux cleaned = 3.21313e-05 Jy ! Component: 200 - total flux cleaned = -7.7245e-06 Jy ! Total flux subtracted in 200 components = -7.7245e-06 Jy ! Clean residual min=-0.002077 max=0.002136 Jy/beam ! Clean residual mean=-0.000000 rms=0.000597 Jy/beam ! Combined flux in latest and established models = 0.393131 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 309 components and 0.393131 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.058818Jy sigma=1.189550 ! Fit after self-cal, rms=0.058818Jy sigma=1.189542 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=5.571 mas, bmaj=27.14 mas, bpa=-10.95 degrees ! Estimated noise=0.704898 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.571 x 27.14 at -10.95 degrees (North through East) ! Clean map min=-0.0028923 max=0.33849 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.668 mas, bmaj=28.16 mas, bpa=-11.3 degrees ! Estimated noise=0.946752 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.256089 Jy ! Component: 100 - total flux cleaned = 0.317572 Jy ! Component: 150 - total flux cleaned = 0.344523 Jy ! Component: 200 - total flux cleaned = 0.358179 Jy ! Total flux subtracted in 200 components = 0.358179 Jy ! Clean residual min=-0.006394 max=0.006820 Jy/beam ! Clean residual mean=-0.000005 rms=0.001918 Jy/beam ! Combined flux in latest and established models = 0.358178 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 40 model components to the UV plane model. ! The established model now contains 40 components and 0.358178 Jy ! Inverting map and beam ! Estimated beam: bmin=5.571 mas, bmaj=27.14 mas, bpa=-10.95 degrees ! Estimated noise=0.704898 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0102676 Jy ! Component: 100 - total flux cleaned = 0.0161338 Jy ! Component: 150 - total flux cleaned = 0.0201193 Jy ! Component: 200 - total flux cleaned = 0.0235698 Jy ! Total flux subtracted in 200 components = 0.0235698 Jy ! Clean residual min=-0.003602 max=0.003290 Jy/beam ! Clean residual mean=-0.000002 rms=0.001026 Jy/beam ! Combined flux in latest and established models = 0.381748 Jy ! Adding 68 model components to the UV plane model. ! The established model now contains 102 components and 0.381748 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.966 mas, bmaj=26.62 mas, bpa=-10.22 degrees ! Estimated noise=0.761755 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0032104 Jy ! Component: 100 - total flux cleaned = 0.00548159 Jy ! Component: 150 - total flux cleaned = 0.00686434 Jy ! Component: 200 - total flux cleaned = 0.00812705 Jy ! Total flux subtracted in 200 components = 0.00812705 Jy ! Clean residual min=-0.003228 max=0.002236 Jy/beam ! Clean residual mean=0.000001 rms=0.000834 Jy/beam ! Combined flux in latest and established models = 0.389875 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110366 Jy ! Component: 100 - total flux cleaned = 0.00201978 Jy ! Component: 150 - total flux cleaned = 0.00248148 Jy ! Component: 200 - total flux cleaned = 0.00286159 Jy ! Total flux subtracted in 200 components = 0.00286159 Jy ! Clean residual min=-0.002780 max=0.002249 Jy/beam ! Clean residual mean=0.000001 rms=0.000737 Jy/beam ! Combined flux in latest and established models = 0.392737 Jy ! Adding 81 model components to the UV plane model. ! The established model now contains 179 components and 0.392737 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.571 mas, bmaj=27.14 mas, bpa=-10.95 degrees ! Estimated noise=0.704898 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000286426 Jy ! Component: 100 - total flux cleaned = 0.000733252 Jy ! Component: 150 - total flux cleaned = 0.00106983 Jy ! Component: 200 - total flux cleaned = 0.00116688 Jy ! Total flux subtracted in 200 components = 0.00116688 Jy ! Clean residual min=-0.002443 max=0.002383 Jy/beam ! Clean residual mean=-0.000000 rms=0.000658 Jy/beam ! Combined flux in latest and established models = 0.393904 Jy selfcal ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 215 components and 0.393904 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.058910Jy sigma=1.191645 ! Fit after self-cal, rms=0.058905Jy sigma=1.191530 wmodel J0331-1051_S_map.mod ! Writing 215 model components to file: J0331-1051_S_map.mod wobs J0331-1051_S_uvs.fits ! Writing UV FITS file: J0331-1051_S_uvs.fits wwins J0331-1051_S_map.win ! wwins: Wrote 2 windows to J0331-1051_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000128796 Jy ! Component: 100 - total flux cleaned = -0.000207339 Jy ! Component: 150 - total flux cleaned = -0.00024263 Jy ! Component: 200 - total flux cleaned = -0.000209536 Jy ! Component: 250 - total flux cleaned = -0.000117504 Jy ! Component: 300 - total flux cleaned = -3.02407e-05 Jy ! Component: 350 - total flux cleaned = 8.16023e-05 Jy ! Component: 400 - total flux cleaned = 0.000215745 Jy ! Component: 450 - total flux cleaned = 0.000344763 Jy ! Component: 500 - total flux cleaned = 0.000468842 Jy ! Component: 550 - total flux cleaned = 0.000588833 Jy ! Component: 600 - total flux cleaned = 0.000682059 Jy ! Component: 650 - total flux cleaned = 0.000772432 Jy ! Component: 700 - total flux cleaned = 0.000837986 Jy ! Component: 750 - total flux cleaned = 0.000838115 Jy ! Component: 800 - total flux cleaned = 0.000879397 Jy ! Component: 850 - total flux cleaned = 0.000899286 Jy ! Component: 900 - total flux cleaned = 0.000957145 Jy ! Component: 950 - total flux cleaned = 0.000956697 Jy ! Component: 1000 - total flux cleaned = 0.00106682 Jy ! Component: 1050 - total flux cleaned = 0.00112056 Jy ! Component: 1100 - total flux cleaned = 0.00124218 Jy ! Component: 1150 - total flux cleaned = 0.00127598 Jy ! Component: 1200 - total flux cleaned = 0.00134195 Jy ! Component: 1250 - total flux cleaned = 0.00137423 Jy ! Component: 1300 - total flux cleaned = 0.00142153 Jy ! Component: 1350 - total flux cleaned = 0.00145292 Jy ! Component: 1400 - total flux cleaned = 0.00146838 Jy ! Component: 1450 - total flux cleaned = 0.00148366 Jy ! Component: 1500 - total flux cleaned = 0.00141166 Jy ! Component: 1550 - total flux cleaned = 0.00139747 Jy ! Component: 1600 - total flux cleaned = 0.00138338 Jy ! Component: 1650 - total flux cleaned = 0.00139706 Jy ! Component: 1700 - total flux cleaned = 0.00141055 Jy ! Component: 1750 - total flux cleaned = 0.00143694 Jy ! Component: 1800 - total flux cleaned = 0.00143712 Jy ! Component: 1850 - total flux cleaned = 0.00150132 Jy ! Component: 1900 - total flux cleaned = 0.00151409 Jy ! Component: 1950 - total flux cleaned = 0.00153896 Jy ! Component: 2000 - total flux cleaned = 0.00156374 Jy ! Component: 2050 - total flux cleaned = 0.00157594 Jy ! Component: 2100 - total flux cleaned = 0.00156406 Jy ! Component: 2150 - total flux cleaned = 0.00156422 Jy ! Component: 2200 - total flux cleaned = 0.00156426 Jy ! Component: 2250 - total flux cleaned = 0.0015527 Jy ! Component: 2300 - total flux cleaned = 0.00152969 Jy ! Component: 2350 - total flux cleaned = 0.00152962 Jy ! Component: 2400 - total flux cleaned = 0.0015069 Jy ! Component: 2450 - total flux cleaned = 0.00150693 Jy ! Component: 2500 - total flux cleaned = 0.00148471 Jy ! Component: 2550 - total flux cleaned = 0.0014627 Jy ! Component: 2600 - total flux cleaned = 0.00142993 Jy ! Component: 2650 - total flux cleaned = 0.00141902 Jy ! Component: 2700 - total flux cleaned = 0.00139741 Jy ! Component: 2750 - total flux cleaned = 0.00137606 Jy ! Component: 2800 - total flux cleaned = 0.00136544 Jy ! Component: 2850 - total flux cleaned = 0.00134445 Jy ! Component: 2900 - total flux cleaned = 0.00132357 Jy ! Component: 2950 - total flux cleaned = 0.00132356 Jy ! Component: 3000 - total flux cleaned = 0.00133381 Jy ! Component: 3050 - total flux cleaned = 0.00129279 Jy ! Component: 3100 - total flux cleaned = 0.00127249 Jy ! Component: 3150 - total flux cleaned = 0.00127242 Jy ! Component: 3200 - total flux cleaned = 0.00125225 Jy ! Component: 3250 - total flux cleaned = 0.00123221 Jy ! Component: 3300 - total flux cleaned = 0.00120248 Jy ! Component: 3350 - total flux cleaned = 0.00121242 Jy ! Component: 3400 - total flux cleaned = 0.00119271 Jy ! Component: 3450 - total flux cleaned = 0.0011438 Jy ! Component: 3500 - total flux cleaned = 0.00113409 Jy ! Component: 3550 - total flux cleaned = 0.00113411 Jy ! Component: 3600 - total flux cleaned = 0.00110515 Jy ! Component: 3650 - total flux cleaned = 0.00107634 Jy ! Component: 3700 - total flux cleaned = 0.00104765 Jy ! Component: 3750 - total flux cleaned = 0.00101912 Jy ! Component: 3800 - total flux cleaned = 0.00100014 Jy ! Component: 3850 - total flux cleaned = 0.000952947 Jy ! Component: 3900 - total flux cleaned = 0.000915311 Jy ! Component: 3950 - total flux cleaned = 0.00088721 Jy ! Component: 4000 - total flux cleaned = 0.000877891 Jy ! Component: 4050 - total flux cleaned = 0.000831394 Jy ! Total flux subtracted in 4096 components = 0.000794324 Jy ! Clean residual min=-0.000491 max=0.000551 Jy/beam ! Clean residual mean=-0.000002 rms=0.000182 Jy/beam ! Combined flux in latest and established models = 0.394698 Jy keep ! Adding 352 model components to the UV plane model. ! The established model now contains 567 components and 0.394698 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J0331-1051_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.571 x 27.14 at -10.95 degrees (North through East) ! Clean map min=-0.0019553 max=0.33891 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J0331-1051_S_map.fits wmodel /vlbi/uf001/uva//J0331-1051_S_map.mod ! Writing 567 model components to file: /vlbi/uf001/uva//J0331-1051_S_map.mod wobs /vlbi/uf001/uva//J0331-1051_S_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J0331-1051_S_uvs.fits wwins /vlbi/uf001/uva//J0331-1051_S_map.win ! wwins: Wrote 3 windows to /vlbi/uf001/uva//J0331-1051_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.338914 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000178347 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.15787 0.15787 0.31574 0.631479 1.26296 2.52592 5.05183 10.1037 20.2073 40.4147 80.8293 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.338 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1900.3 quit ! Quitting program ! Log file /vlbi/uf001/uva//J0331-1051_S_dfm.log closed on Sun Jan 13 21:50:45 2019