! Started logfile: /vlbi/uf001/uva//J0330-0551_S_b_dfm.log on Sun Jan 13 21:50:07 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J0330-0551_S_b_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0330-0551_S_b_uva.fits
! AN table 1: 148 integrations on 1 of 1 possible baselines.
! AN table 2: 148 integrations on 10 of 10 possible baselines.
! Apparent sampling: 0.818182 visibilities/baseline/integration-bin.
! Found source: J0330-0551
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 3996 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0330-0551_S_b]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 296 telescope corrections were flagged in sub-array 1.
!  A total of 92 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 296 telescope corrections were flagged in sub-array 1.
!  A total of 92 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 296 telescope corrections were flagged in sub-array 1.
!  A total of 92 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.004701Jy  sigma=20.293671
! Fit after  self-cal, rms=0.951048Jy  sigma=18.924361
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=11 mas, bmaj=23.28 mas, bpa=39.49 degrees
! Estimated noise=0.823382 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0382938 Jy
! Component: 100  -  total flux cleaned = 0.0463631 Jy
! Total flux subtracted in 100 components = 0.0463631 Jy
! Clean residual min=-0.004386 max=0.004407 Jy/beam
! Clean residual mean=-0.000035 rms=0.001872 Jy/beam
! Combined flux in latest and established models = 0.0463632 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.0463632 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061540Jy  sigma=1.150246
! Fit after  self-cal, rms=0.060490Jy  sigma=1.127158
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=13.46 mas, bmaj=23.95 mas, bpa=32.52 degrees
! Estimated noise=0.616365 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00364162 Jy
! Component: 100  -  total flux cleaned = 0.00343978 Jy
! Component: 150  -  total flux cleaned = 0.00417297 Jy
! Component: 200  -  total flux cleaned = 0.00455464 Jy
! Total flux subtracted in 200 components = 0.00455464 Jy
! Clean residual min=-0.001944 max=0.001940 Jy/beam
! Clean residual mean=0.000008 rms=0.000820 Jy/beam
! Combined flux in latest and established models = 0.0509178 Jy
! Performing phase self-cal
! Adding 64 model components to the UV plane model.
! The established model now contains 73 components and 0.0509178 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059430Jy  sigma=1.102603
! Fit after  self-cal, rms=0.059300Jy  sigma=1.098805
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 13.46 x 23.95 at 32.52 degrees (North through East)
! Clean map  min=-0.005726  max=0.049197 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   HN        0.00*    NL        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.15     KP        0.97     LA        0.94     OV        1.16     
!   PT        0.96     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   HN        0.00*    NL        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.77     KP        1.04     LA        0.96     OV        0.91     
!   PT        0.97     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   HN        0.00*    NL        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.02     KP        0.97     LA        0.93     OV        1.04     
!   PT        0.97     
! 
! 
! Fit before self-cal, rms=0.059300Jy  sigma=1.098805
! Fit after  self-cal, rms=0.056349Jy  sigma=1.091409
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=13.42 mas, bmaj=23.89 mas, bpa=33 degrees
! Estimated noise=0.592783 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00121465 Jy
! Component: 100  -  total flux cleaned = 0.000443169 Jy
! Component: 150  -  total flux cleaned = 3.4589e-05 Jy
! Component: 200  -  total flux cleaned = -0.000231977 Jy
! Total flux subtracted in 200 components = -0.000231977 Jy
! Clean residual min=-0.000813 max=0.000814 Jy/beam
! Clean residual mean=-0.000007 rms=0.000326 Jy/beam
! Combined flux in latest and established models = 0.0506858 Jy
! Performing phase self-cal
! Adding 76 model components to the UV plane model.
! The established model now contains 148 components and 0.0506858 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056113Jy  sigma=1.086165
! Fit after  self-cal, rms=0.056097Jy  sigma=1.083681
! Inverting map 
! Added new window around map position (18, -0.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00167664 Jy
! Component: 100  -  total flux cleaned = 0.002182 Jy
! Component: 150  -  total flux cleaned = 0.00234845 Jy
! Component: 200  -  total flux cleaned = 0.00237143 Jy
! Total flux subtracted in 200 components = 0.00237143 Jy
! Clean residual min=-0.001379 max=0.001235 Jy/beam
! Clean residual mean=-0.000002 rms=0.000404 Jy/beam
! Combined flux in latest and established models = 0.0530572 Jy
! Performing phase self-cal
! Adding 55 model components to the UV plane model.
! The established model now contains 202 components and 0.0530572 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056043Jy  sigma=1.082517
! Fit after  self-cal, rms=0.055984Jy  sigma=1.081491
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055984Jy  sigma=1.081491
! Fit after  self-cal, rms=0.056099Jy  sigma=1.078880
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=13.41 mas, bmaj=23.98 mas, bpa=32.64 degrees
! Estimated noise=0.589848 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00117926 Jy
! Component: 100  -  total flux cleaned = 0.00105355 Jy
! Component: 150  -  total flux cleaned = 0.000893504 Jy
! Component: 200  -  total flux cleaned = 0.000929962 Jy
! Total flux subtracted in 200 components = 0.000929962 Jy
! Clean residual min=-0.001117 max=0.000931 Jy/beam
! Clean residual mean=-0.000002 rms=0.000314 Jy/beam
! Combined flux in latest and established models = 0.0539872 Jy
selfcal
! Performing phase self-cal
! Adding 48 model components to the UV plane model.
! The established model now contains 244 components and 0.0539872 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056068Jy  sigma=1.078169
! Fit after  self-cal, rms=0.056112Jy  sigma=1.077719
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.23313e-05 Jy
! Component: 100  -  total flux cleaned = -0.000118935 Jy
! Component: 150  -  total flux cleaned = -0.000120002 Jy
! Component: 200  -  total flux cleaned = -0.000101958 Jy
! Total flux subtracted in 200 components = -0.000101958 Jy
! Clean residual min=-0.001148 max=0.000911 Jy/beam
! Clean residual mean=-0.000002 rms=0.000307 Jy/beam
! Combined flux in latest and established models = 0.0538852 Jy
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 271 components and 0.0538852 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056096Jy  sigma=1.077404
! Fit after  self-cal, rms=0.056099Jy  sigma=1.077347
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056099Jy  sigma=1.077347
! Fit after  self-cal, rms=0.056187Jy  sigma=1.076902
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=13.42 mas, bmaj=24.03 mas, bpa=32.38 degrees
! Estimated noise=0.586977 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000279298 Jy
! Component: 100  -  total flux cleaned = 0.000115639 Jy
! Component: 150  -  total flux cleaned = -2.05154e-05 Jy
! Component: 200  -  total flux cleaned = -6.51406e-05 Jy
! Total flux subtracted in 200 components = -6.51406e-05 Jy
! Clean residual min=-0.000837 max=0.000800 Jy/beam
! Clean residual mean=-0.000002 rms=0.000248 Jy/beam
! Combined flux in latest and established models = 0.0538201 Jy
selfcal
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 295 components and 0.0538201 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056174Jy  sigma=1.076612
! Fit after  self-cal, rms=0.056223Jy  sigma=1.076477
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000251744 Jy
! Component: 100  -  total flux cleaned = -0.000367602 Jy
! Component: 150  -  total flux cleaned = -0.000397117 Jy
! Component: 200  -  total flux cleaned = -0.000434748 Jy
! Total flux subtracted in 200 components = -0.000434748 Jy
! Clean residual min=-0.000860 max=0.000781 Jy/beam
! Clean residual mean=-0.000002 rms=0.000242 Jy/beam
! Combined flux in latest and established models = 0.0533854 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 314 components and 0.0533854 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056214Jy  sigma=1.076316
! Fit after  self-cal, rms=0.056192Jy  sigma=1.076167
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056192Jy  sigma=1.076167
! Fit after  self-cal, rms=0.056102Jy  sigma=1.076097
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=14.16 mas, bmaj=24.44 mas, bpa=29.81 degrees
! Estimated noise=0.584141 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.80361e-05 Jy
! Component: 100  -  total flux cleaned = -7.56433e-05 Jy
! Component: 150  -  total flux cleaned = -0.000164092 Jy
! Component: 200  -  total flux cleaned = -0.000218352 Jy
! Total flux subtracted in 200 components = -0.000218352 Jy
! Clean residual min=-0.000707 max=0.000718 Jy/beam
! Clean residual mean=-0.000002 rms=0.000207 Jy/beam
! Combined flux in latest and established models = 0.053167 Jy
selfcal
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 346 components and 0.053167 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056094Jy  sigma=1.075931
! Fit after  self-cal, rms=0.056103Jy  sigma=1.075888
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000186818 Jy
! Component: 100  -  total flux cleaned = -0.000283259 Jy
! Component: 150  -  total flux cleaned = -0.000314881 Jy
! Component: 200  -  total flux cleaned = -0.000369744 Jy
! Total flux subtracted in 200 components = -0.000369744 Jy
! Clean residual min=-0.000685 max=0.000699 Jy/beam
! Clean residual mean=-0.000002 rms=0.000200 Jy/beam
! Combined flux in latest and established models = 0.0527973 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 360 components and 0.0527973 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056098Jy  sigma=1.075792
! Fit after  self-cal, rms=0.056100Jy  sigma=1.075774
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=13.44 mas, bmaj=24.04 mas, bpa=32.24 degrees
! Estimated noise=0.584811 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 13.44 x 24.04 at 32.24 degrees (North through East)
! Clean map  min=-0.0037693  max=0.047856 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.95 mas, bmaj=23.51 mas, bpa=38.76 degrees
! Estimated noise=0.785048 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.036738 Jy
! Component: 100  -  total flux cleaned = 0.0477602 Jy
! Component: 150  -  total flux cleaned = 0.0550854 Jy
! Component: 200  -  total flux cleaned = 0.0601644 Jy
! Total flux subtracted in 200 components = 0.0601644 Jy
! Clean residual min=-0.006649 max=0.006123 Jy/beam
! Clean residual mean=-0.000039 rms=0.002031 Jy/beam
! Combined flux in latest and established models = 0.0601645 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 37 model components to the UV plane model.
! The established model now contains 37 components and 0.0601645 Jy
! Inverting map and beam 
! Estimated beam: bmin=13.44 mas, bmaj=24.04 mas, bpa=32.24 degrees
! Estimated noise=0.584811 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00344849 Jy
! Component: 100  -  total flux cleaned = 0.00567838 Jy
! Component: 150  -  total flux cleaned = 0.00689833 Jy
! Component: 200  -  total flux cleaned = 0.00771621 Jy
! Total flux subtracted in 200 components = 0.00771621 Jy
! Clean residual min=-0.004798 max=0.004166 Jy/beam
! Clean residual mean=-0.000012 rms=0.001252 Jy/beam
! Combined flux in latest and established models = 0.0678807 Jy
! Adding 46 model components to the UV plane model.
! The established model now contains 83 components and 0.0678807 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=14.16 mas, bmaj=24.44 mas, bpa=29.81 degrees
! Estimated noise=0.584141 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00111035 Jy
! Component: 100  -  total flux cleaned = 0.00105528 Jy
! Component: 150  -  total flux cleaned = 0.000875776 Jy
! Component: 200  -  total flux cleaned = 0.000709998 Jy
! Total flux subtracted in 200 components = 0.000709998 Jy
! Clean residual min=-0.004085 max=0.003554 Jy/beam
! Clean residual mean=-0.000011 rms=0.001042 Jy/beam
! Combined flux in latest and established models = 0.0685907 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000103807 Jy
! Component: 100  -  total flux cleaned = -0.000152715 Jy
! Component: 150  -  total flux cleaned = -0.000376813 Jy
! Component: 200  -  total flux cleaned = -0.000502612 Jy
! Total flux subtracted in 200 components = -0.000502612 Jy
! Clean residual min=-0.003601 max=0.003253 Jy/beam
! Clean residual mean=-0.000009 rms=0.000929 Jy/beam
! Combined flux in latest and established models = 0.0680881 Jy
! Adding 64 model components to the UV plane model.
! The established model now contains 139 components and 0.0680881 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=13.44 mas, bmaj=24.04 mas, bpa=32.24 degrees
! Estimated noise=0.584811 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000611067 Jy
! Component: 100  -  total flux cleaned = -0.000768226 Jy
! Component: 150  -  total flux cleaned = -0.000841934 Jy
! Component: 200  -  total flux cleaned = -0.000949138 Jy
! Total flux subtracted in 200 components = -0.000949138 Jy
! Clean residual min=-0.003235 max=0.003027 Jy/beam
! Clean residual mean=-0.000007 rms=0.000846 Jy/beam
! Combined flux in latest and established models = 0.0671389 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 154 components and 0.0671389 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056357Jy  sigma=1.081366
! Fit after  self-cal, rms=0.056271Jy  sigma=1.079570
wmodel J0330-0551_S_b_map.mod
! Writing 154 model components to file: J0330-0551_S_b_map.mod
wobs   J0330-0551_S_b_uvs.fits
! Writing UV FITS file: J0330-0551_S_b_uvs.fits
wwins  J0330-0551_S_b_map.win
! wwins: Wrote 1 windows to J0330-0551_S_b_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000213074 Jy
! Component: 100  -  total flux cleaned = -0.000495869 Jy
! Component: 150  -  total flux cleaned = -0.0006611 Jy
! Component: 200  -  total flux cleaned = -0.000780125 Jy
! Component: 250  -  total flux cleaned = -0.000973761 Jy
! Component: 300  -  total flux cleaned = -0.00118355 Jy
! Component: 350  -  total flux cleaned = -0.00136115 Jy
! Component: 400  -  total flux cleaned = -0.001612 Jy
! Component: 450  -  total flux cleaned = -0.00184929 Jy
! Component: 500  -  total flux cleaned = -0.00207419 Jy
! Component: 550  -  total flux cleaned = -0.00228709 Jy
! Component: 600  -  total flux cleaned = -0.00250099 Jy
! Component: 650  -  total flux cleaned = -0.0027065 Jy
! Component: 700  -  total flux cleaned = -0.00291437 Jy
! Component: 750  -  total flux cleaned = -0.00306482 Jy
! Component: 800  -  total flux cleaned = -0.00319095 Jy
! Component: 850  -  total flux cleaned = -0.00331317 Jy
! Component: 900  -  total flux cleaned = -0.00339494 Jy
! Component: 950  -  total flux cleaned = -0.00347433 Jy
! Component: 1000  -  total flux cleaned = -0.00355137 Jy
! Component: 1050  -  total flux cleaned = -0.00362617 Jy
! Component: 1100  -  total flux cleaned = -0.0036829 Jy
! Component: 1150  -  total flux cleaned = -0.00373828 Jy
! Component: 1200  -  total flux cleaned = -0.00377689 Jy
! Component: 1250  -  total flux cleaned = -0.00379971 Jy
! Component: 1300  -  total flux cleaned = -0.00382975 Jy
! Component: 1350  -  total flux cleaned = -0.00383722 Jy
! Component: 1400  -  total flux cleaned = -0.00383721 Jy
! Component: 1450  -  total flux cleaned = -0.00383721 Jy
! Component: 1500  -  total flux cleaned = -0.0038372 Jy
! Component: 1550  -  total flux cleaned = -0.00384437 Jy
! Component: 1600  -  total flux cleaned = -0.0038086 Jy
! Component: 1650  -  total flux cleaned = -0.00378006 Jy
! Component: 1700  -  total flux cleaned = -0.00376589 Jy
! Component: 1750  -  total flux cleaned = -0.003773 Jy
! Component: 1800  -  total flux cleaned = -0.00379445 Jy
! Component: 1850  -  total flux cleaned = -0.00382315 Jy
! Component: 1900  -  total flux cleaned = -0.00383758 Jy
! Component: 1950  -  total flux cleaned = -0.00385932 Jy
! Component: 2000  -  total flux cleaned = -0.00388138 Jy
! Component: 2050  -  total flux cleaned = -0.00391084 Jy
! Component: 2100  -  total flux cleaned = -0.00391088 Jy
! Component: 2150  -  total flux cleaned = -0.00392569 Jy
! Component: 2200  -  total flux cleaned = -0.0039557 Jy
! Component: 2250  -  total flux cleaned = -0.0039632 Jy
! Component: 2300  -  total flux cleaned = -0.00398605 Jy
! Component: 2350  -  total flux cleaned = -0.00400144 Jy
! Component: 2400  -  total flux cleaned = -0.00403237 Jy
! Component: 2450  -  total flux cleaned = -0.00405576 Jy
! Component: 2500  -  total flux cleaned = -0.00407148 Jy
! Component: 2550  -  total flux cleaned = -0.00410327 Jy
! Component: 2600  -  total flux cleaned = -0.00411925 Jy
! Component: 2650  -  total flux cleaned = -0.0041515 Jy
! Component: 2700  -  total flux cleaned = -0.00416783 Jy
! Component: 2750  -  total flux cleaned = -0.00420074 Jy
! Component: 2800  -  total flux cleaned = -0.00420904 Jy
! Component: 2850  -  total flux cleaned = -0.00424249 Jy
! Component: 2900  -  total flux cleaned = -0.00425094 Jy
! Component: 2950  -  total flux cleaned = -0.00425947 Jy
! Component: 3000  -  total flux cleaned = -0.0042854 Jy
! Component: 3050  -  total flux cleaned = -0.00430294 Jy
! Component: 3100  -  total flux cleaned = -0.00431183 Jy
! Component: 3150  -  total flux cleaned = -0.00433888 Jy
! Component: 3200  -  total flux cleaned = -0.00435723 Jy
! Component: 3250  -  total flux cleaned = -0.00437579 Jy
! Component: 3300  -  total flux cleaned = -0.00440401 Jy
! Component: 3350  -  total flux cleaned = -0.00441355 Jy
! Component: 3400  -  total flux cleaned = -0.00444265 Jy
! Component: 3450  -  total flux cleaned = -0.0044524 Jy
! Component: 3500  -  total flux cleaned = -0.00448225 Jy
! Component: 3550  -  total flux cleaned = -0.00451258 Jy
! Component: 3600  -  total flux cleaned = -0.00453318 Jy
! Component: 3650  -  total flux cleaned = -0.00455403 Jy
! Component: 3700  -  total flux cleaned = -0.00458569 Jy
! Component: 3750  -  total flux cleaned = -0.00462859 Jy
! Component: 3800  -  total flux cleaned = -0.00466113 Jy
! Component: 3850  -  total flux cleaned = -0.00469415 Jy
! Component: 3900  -  total flux cleaned = -0.00473907 Jy
! Component: 3950  -  total flux cleaned = -0.00478453 Jy
! Component: 4000  -  total flux cleaned = -0.00481921 Jy
! Component: 4050  -  total flux cleaned = -0.00486606 Jy
! Total flux subtracted in 4096 components = -0.00488989 Jy
! Clean residual min=-0.000619 max=0.000645 Jy/beam
! Clean residual mean=0.000003 rms=0.000220 Jy/beam
! Combined flux in latest and established models = 0.0622491 Jy
keep
! Adding 226 model components to the UV plane model.
! The established model now contains 380 components and 0.0622491 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0330-0551_S_b_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 13.44 x 24.04 at 32.24 degrees (North through East)
! Clean map  min=-0.0042442  max=0.052018 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0330-0551_S_b_map.fits
wmodel /vlbi/uf001/uva//J0330-0551_S_b_map.mod
! Writing 380 model components to file: /vlbi/uf001/uva//J0330-0551_S_b_map.mod
wobs   /vlbi/uf001/uva//J0330-0551_S_b_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0330-0551_S_b_uvs.fits
wwins  /vlbi/uf001/uva//J0330-0551_S_b_map.win
! wwins: Wrote 2 windows to /vlbi/uf001/uva//J0330-0551_S_b_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0520178 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000212027 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.22281 1.22281 2.44562 4.89125 9.78249 19.565 39.13 78.26
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.052 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  245.336 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0330-0551_S_b_dfm.log closed on Sun Jan 13 21:50:12 2019