! Started logfile: /vlbi/uf001/uva//J0323+0145_X_dfm.log on Sun Jan 13 21:47:00 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J0323+0145_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J0323+0145_X_uva.fits ! AN table 1: 42 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.961376 visibilities/baseline/integration-bin. ! Found source: J0323+0145 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 21804 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0323+0145_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.028260Jy sigma=18.468095 ! Fit after self-cal, rms=0.787193Jy sigma=13.891660 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6467 mas, bmaj=1.678 mas, bpa=-2.642 degrees ! Estimated noise=0.446827 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.160019 Jy ! Component: 100 - total flux cleaned = 0.207744 Jy ! Total flux subtracted in 100 components = 0.207744 Jy ! Clean residual min=-0.009643 max=0.021066 Jy/beam ! Clean residual mean=-0.000005 rms=0.002539 Jy/beam ! Combined flux in latest and established models = 0.207744 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.207744 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.123404Jy sigma=1.890404 ! Fit after self-cal, rms=0.123294Jy sigma=1.889185 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0230511 Jy ! Component: 100 - total flux cleaned = 0.0351355 Jy ! Total flux subtracted in 100 components = 0.0351355 Jy ! Clean residual min=-0.009093 max=0.012185 Jy/beam ! Clean residual mean=-0.000004 rms=0.002144 Jy/beam ! Combined flux in latest and established models = 0.24288 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 13 components and 0.24288 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.117265Jy sigma=1.706528 ! Fit after self-cal, rms=0.117230Jy sigma=1.706326 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8095 mas, bmaj=1.923 mas, bpa=-2.438 degrees ! Estimated noise=0.299681 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0167051 Jy ! Component: 100 - total flux cleaned = 0.0254882 Jy ! Component: 150 - total flux cleaned = 0.0305712 Jy ! Component: 200 - total flux cleaned = 0.033595 Jy ! Total flux subtracted in 200 components = 0.033595 Jy ! Clean residual min=-0.011561 max=0.016077 Jy/beam ! Clean residual mean=-0.000006 rms=0.003718 Jy/beam ! Combined flux in latest and established models = 0.276475 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 23 components and 0.276475 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.116376Jy sigma=1.634057 ! Fit after self-cal, rms=0.116353Jy sigma=1.633854 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8095 x 1.923 at -2.438 degrees (North through East) ! Clean map min=-0.011133 max=0.2224 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.96 HN 0.99 KP 0.94 ! LA 1.10 MK 0.99 NL 1.19 OV 0.92 ! PT 0.79 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.98 HN 1.01 KP 0.95 ! LA 1.11 MK 0.99 NL 1.22 OV 0.90 ! PT 0.80 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.99 HN 1.00 KP 0.95 ! LA 1.12 MK 0.99 NL 1.22 OV 0.92 ! PT 0.80 SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.97 HN 0.98 KP 0.96 ! LA 1.12 MK 0.98 NL 1.19 OV 0.93 ! PT 0.79 SC 1.01 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.99 HN 1.00 KP 0.97 ! LA 1.13 MK 0.98 NL 1.18 OV 0.92 ! PT 0.81 SC 1.00 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.00 HN 1.01 KP 0.95 ! LA 1.13 MK 0.98 NL 1.20 OV 0.92 ! PT 0.79 SC 0.99 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.01 HN 1.01 KP 0.95 ! LA 1.12 MK 1.01 NL 1.23 OV 0.91 ! PT 0.80 SC 1.00 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.00 HN 1.01 KP 0.97 ! LA 1.09 MK 0.99 NL 1.17 OV 0.91 ! PT 0.78 SC 1.01 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.99 HN 1.02 KP 0.95 ! LA 1.10 MK 0.98 NL 1.25 OV 0.93 ! PT 0.80 SC 1.00 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.99 HN 1.00 KP 0.96 ! LA 1.12 MK 0.96 NL 1.28 OV 0.93 ! PT 0.80 SC 0.99 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.01 HN 1.04 KP 0.96 ! LA 1.14 MK 0.95 NL 1.23 OV 0.92 ! PT 0.78 SC 1.00 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.00 HN 1.03 KP 0.95 ! LA 1.11 MK 0.99 NL 1.24 OV 0.93 ! PT 0.79 SC 1.04 ! ! ! Fit before self-cal, rms=0.116353Jy sigma=1.633854 ! Fit after self-cal, rms=0.113005Jy sigma=1.513699 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8111 mas, bmaj=1.953 mas, bpa=-2.455 degrees ! Estimated noise=0.293985 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00498014 Jy ! Component: 100 - total flux cleaned = -0.00786406 Jy ! Component: 150 - total flux cleaned = -0.00891927 Jy ! Component: 200 - total flux cleaned = -0.00910619 Jy ! Total flux subtracted in 200 components = -0.00910619 Jy ! Clean residual min=-0.009109 max=0.012150 Jy/beam ! Clean residual mean=-0.000000 rms=0.002973 Jy/beam ! Combined flux in latest and established models = 0.267369 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 29 components and 0.267369 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.112331Jy sigma=1.513808 ! Fit after self-cal, rms=0.112691Jy sigma=1.513055 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.112691Jy sigma=1.513055 ! Fit after self-cal, rms=0.179104Jy sigma=1.244231 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8117 mas, bmaj=1.952 mas, bpa=-2.541 degrees ! Estimated noise=0.296267 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00120533 Jy ! Component: 100 - total flux cleaned = 0.00120479 Jy ! Component: 150 - total flux cleaned = 0.00116352 Jy ! Component: 200 - total flux cleaned = 0.00116477 Jy ! Total flux subtracted in 200 components = 0.00116477 Jy ! Clean residual min=-0.003533 max=0.009380 Jy/beam ! Clean residual mean=-0.000002 rms=0.000763 Jy/beam ! Combined flux in latest and established models = 0.268534 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 30 components and 0.268534 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.179090Jy sigma=1.243140 ! Fit after self-cal, rms=0.179620Jy sigma=1.242158 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1, 0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00778093 Jy ! Component: 100 - total flux cleaned = 0.0100098 Jy ! Component: 150 - total flux cleaned = 0.0103705 Jy ! Component: 200 - total flux cleaned = 0.0105706 Jy ! Total flux subtracted in 200 components = 0.0105706 Jy ! Clean residual min=-0.002528 max=0.004067 Jy/beam ! Clean residual mean=-0.000001 rms=0.000583 Jy/beam ! Combined flux in latest and established models = 0.279104 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 44 components and 0.279104 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.179231Jy sigma=1.224931 ! Fit after self-cal, rms=0.179257Jy sigma=1.223194 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00154837 Jy ! Component: 100 - total flux cleaned = 0.00136657 Jy ! Component: 150 - total flux cleaned = 0.00152277 Jy ! Component: 200 - total flux cleaned = 0.00166062 Jy ! Total flux subtracted in 200 components = 0.00166062 Jy ! Clean residual min=-0.002305 max=0.002551 Jy/beam ! Clean residual mean=-0.000000 rms=0.000535 Jy/beam ! Combined flux in latest and established models = 0.280765 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 50 components and 0.280765 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.179161Jy sigma=1.219886 ! Fit after self-cal, rms=0.179165Jy sigma=1.219563 ! Inverting map ! Added new window around map position (-28.6, -32). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00211241 Jy ! Component: 100 - total flux cleaned = 0.00250718 Jy ! Component: 150 - total flux cleaned = 0.00296215 Jy ! Component: 200 - total flux cleaned = 0.00321587 Jy ! Total flux subtracted in 200 components = 0.00321587 Jy ! Clean residual min=-0.002051 max=0.002277 Jy/beam ! Clean residual mean=-0.000000 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 0.283981 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 62 components and 0.283981 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.179124Jy sigma=1.217408 ! Fit after self-cal, rms=0.179123Jy sigma=1.217270 ! Inverting map ! Added new window around map position (-3.6, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00172458 Jy ! Component: 100 - total flux cleaned = 0.00198849 Jy ! Component: 150 - total flux cleaned = 0.00213052 Jy ! Component: 200 - total flux cleaned = 0.0023017 Jy ! Total flux subtracted in 200 components = 0.0023017 Jy ! Clean residual min=-0.001932 max=0.002110 Jy/beam ! Clean residual mean=-0.000000 rms=0.000472 Jy/beam ! Combined flux in latest and established models = 0.286282 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 70 components and 0.286282 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.179106Jy sigma=1.215649 ! Fit after self-cal, rms=0.179103Jy sigma=1.215553 ! Inverting map ! Added new window around map position (50.6, -30). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00159992 Jy ! Component: 100 - total flux cleaned = 0.00187889 Jy ! Component: 150 - total flux cleaned = 0.00208161 Jy ! Component: 200 - total flux cleaned = 0.00208106 Jy ! Total flux subtracted in 200 components = 0.00208106 Jy ! Clean residual min=-0.001937 max=0.001929 Jy/beam ! Clean residual mean=-0.000000 rms=0.000453 Jy/beam ! Combined flux in latest and established models = 0.288363 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 83 components and 0.288363 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.179059Jy sigma=1.214584 ! Fit after self-cal, rms=0.179071Jy sigma=1.214499 ! Inverting map ! Added new window around map position (33.2, 32.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00154447 Jy ! Component: 100 - total flux cleaned = 0.00179161 Jy ! Component: 150 - total flux cleaned = 0.00190558 Jy ! Component: 200 - total flux cleaned = 0.00201284 Jy ! Total flux subtracted in 200 components = 0.00201284 Jy ! Clean residual min=-0.001844 max=0.001902 Jy/beam ! Clean residual mean=-0.000000 rms=0.000430 Jy/beam ! Combined flux in latest and established models = 0.290376 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 95 components and 0.290376 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.179032Jy sigma=1.213569 ! Fit after self-cal, rms=0.179034Jy sigma=1.213518 ! Inverting map ! Added new window around map position (-14.2, 3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00159378 Jy ! Component: 100 - total flux cleaned = 0.00202602 Jy ! Component: 150 - total flux cleaned = 0.00217445 Jy ! Component: 200 - total flux cleaned = 0.00231175 Jy ! Total flux subtracted in 200 components = 0.00231175 Jy ! Clean residual min=-0.001846 max=0.001687 Jy/beam ! Clean residual mean=-0.000000 rms=0.000412 Jy/beam ! Combined flux in latest and established models = 0.292688 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 110 components and 0.292688 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.178998Jy sigma=1.212566 ! Fit after self-cal, rms=0.179000Jy sigma=1.212497 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.179000Jy sigma=1.212497 ! Fit after self-cal, rms=0.188942Jy sigma=1.209904 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8085 mas, bmaj=1.947 mas, bpa=-2.497 degrees ! Estimated noise=0.295608 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000495083 Jy ! Component: 100 - total flux cleaned = 0.000528256 Jy ! Component: 150 - total flux cleaned = 0.000411888 Jy ! Component: 200 - total flux cleaned = 0.000249186 Jy ! Total flux subtracted in 200 components = 0.000249186 Jy ! Clean residual min=-0.001716 max=0.001567 Jy/beam ! Clean residual mean=-0.000001 rms=0.000352 Jy/beam ! Combined flux in latest and established models = 0.292937 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 128 components and 0.292937 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.188929Jy sigma=1.209331 ! Fit after self-cal, rms=0.188950Jy sigma=1.209287 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.77289e-05 Jy ! Component: 100 - total flux cleaned = -0.000212018 Jy ! Component: 150 - total flux cleaned = -0.000398309 Jy ! Component: 200 - total flux cleaned = -0.000487177 Jy ! Total flux subtracted in 200 components = -0.000487177 Jy ! Clean residual min=-0.001668 max=0.001569 Jy/beam ! Clean residual mean=-0.000001 rms=0.000348 Jy/beam ! Combined flux in latest and established models = 0.29245 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 137 components and 0.29245 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.188943Jy sigma=1.209025 ! Fit after self-cal, rms=0.188944Jy sigma=1.209010 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.188944Jy sigma=1.209010 ! Fit after self-cal, rms=0.189350Jy sigma=1.208918 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.114 mas, bmaj=3.165 mas, bpa=4.992 degrees ! Estimated noise=0.408406 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000312605 Jy ! Component: 100 - total flux cleaned = -0.000519114 Jy ! Component: 150 - total flux cleaned = -0.00067411 Jy ! Component: 200 - total flux cleaned = -0.000766836 Jy ! Total flux subtracted in 200 components = -0.000766836 Jy ! Clean residual min=-0.001455 max=0.001715 Jy/beam ! Clean residual mean=-0.000001 rms=0.000442 Jy/beam ! Combined flux in latest and established models = 0.291683 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 153 components and 0.291683 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.189339Jy sigma=1.208936 ! Fit after self-cal, rms=0.189340Jy sigma=1.208912 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000188648 Jy ! Component: 100 - total flux cleaned = -0.000289284 Jy ! Component: 150 - total flux cleaned = -0.000419126 Jy ! Component: 200 - total flux cleaned = -0.000521293 Jy ! Total flux subtracted in 200 components = -0.000521293 Jy ! Clean residual min=-0.001424 max=0.001666 Jy/beam ! Clean residual mean=-0.000001 rms=0.000437 Jy/beam ! Combined flux in latest and established models = 0.291162 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 161 components and 0.291162 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.189335Jy sigma=1.208976 ! Fit after self-cal, rms=0.189336Jy sigma=1.208969 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8076 mas, bmaj=1.946 mas, bpa=-2.478 degrees ! Estimated noise=0.295772 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8076 x 1.946 at -2.478 degrees (North through East) ! Clean map min=-0.0015305 max=0.21786 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6428 mas, bmaj=1.692 mas, bpa=-2.62 degrees ! Estimated noise=0.443748 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.158572 Jy ! Component: 100 - total flux cleaned = 0.207476 Jy ! Component: 150 - total flux cleaned = 0.232028 Jy ! Component: 200 - total flux cleaned = 0.2473 Jy ! Total flux subtracted in 200 components = 0.2473 Jy ! Clean residual min=-0.003989 max=0.008056 Jy/beam ! Clean residual mean=-0.000002 rms=0.000902 Jy/beam ! Combined flux in latest and established models = 0.247299 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.247299 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8076 mas, bmaj=1.946 mas, bpa=-2.478 degrees ! Estimated noise=0.295772 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0153049 Jy ! Component: 100 - total flux cleaned = 0.0229953 Jy ! Component: 150 - total flux cleaned = 0.0273382 Jy ! Component: 200 - total flux cleaned = 0.0305418 Jy ! Total flux subtracted in 200 components = 0.0305418 Jy ! Clean residual min=-0.002179 max=0.003713 Jy/beam ! Clean residual mean=-0.000001 rms=0.000489 Jy/beam ! Combined flux in latest and established models = 0.277841 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 29 components and 0.277841 Jy ! Inverting map ! Added new window around map position (-0.8, -0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00341886 Jy ! Component: 100 - total flux cleaned = 0.00578261 Jy ! Component: 150 - total flux cleaned = 0.00780066 Jy ! Component: 200 - total flux cleaned = 0.00914326 Jy ! Total flux subtracted in 200 components = 0.00914326 Jy ! Clean residual min=-0.001911 max=0.001765 Jy/beam ! Clean residual mean=-0.000001 rms=0.000400 Jy/beam ! Combined flux in latest and established models = 0.286985 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 51 components and 0.286984 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.114 mas, bmaj=3.165 mas, bpa=4.992 degrees ! Estimated noise=0.408406 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00124937 Jy ! Component: 100 - total flux cleaned = 0.0019566 Jy ! Component: 150 - total flux cleaned = 0.00236275 Jy ! Component: 200 - total flux cleaned = 0.00272113 Jy ! Total flux subtracted in 200 components = 0.00272113 Jy ! Clean residual min=-0.001706 max=0.001620 Jy/beam ! Clean residual mean=-0.000001 rms=0.000466 Jy/beam ! Combined flux in latest and established models = 0.289706 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000319525 Jy ! Component: 100 - total flux cleaned = 0.000572035 Jy ! Component: 150 - total flux cleaned = 0.000769525 Jy ! Component: 200 - total flux cleaned = 0.000980814 Jy ! Total flux subtracted in 200 components = 0.000980814 Jy ! Clean residual min=-0.001597 max=0.001648 Jy/beam ! Clean residual mean=-0.000001 rms=0.000451 Jy/beam ! Combined flux in latest and established models = 0.290686 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 84 components and 0.290686 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8076 mas, bmaj=1.946 mas, bpa=-2.478 degrees ! Estimated noise=0.295772 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000442434 Jy ! Component: 100 - total flux cleaned = -9.90811e-05 Jy ! Component: 150 - total flux cleaned = 0.00016869 Jy ! Component: 200 - total flux cleaned = 0.000497295 Jy ! Total flux subtracted in 200 components = 0.000497295 Jy ! Clean residual min=-0.001907 max=0.001528 Jy/beam ! Clean residual mean=-0.000001 rms=0.000355 Jy/beam ! Combined flux in latest and established models = 0.291184 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 101 components and 0.291184 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.189365Jy sigma=1.209958 ! Fit after self-cal, rms=0.189361Jy sigma=1.209706 wmodel J0323+0145_X_map.mod ! Writing 101 model components to file: J0323+0145_X_map.mod wobs J0323+0145_X_uvs.fits ! Writing UV FITS file: J0323+0145_X_uvs.fits wwins J0323+0145_X_map.win ! wwins: Wrote 8 windows to J0323+0145_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000514749 Jy ! Component: 100 - total flux cleaned = -0.000621851 Jy ! Component: 150 - total flux cleaned = -0.000723059 Jy ! Component: 200 - total flux cleaned = -0.000919364 Jy ! Component: 250 - total flux cleaned = -0.000967345 Jy ! Component: 300 - total flux cleaned = -0.000990349 Jy ! Component: 350 - total flux cleaned = -0.000966965 Jy ! Component: 400 - total flux cleaned = -0.000944467 Jy ! Component: 450 - total flux cleaned = -0.000966905 Jy ! Component: 500 - total flux cleaned = -0.00101045 Jy ! Component: 550 - total flux cleaned = -0.00105334 Jy ! Component: 600 - total flux cleaned = -0.00107417 Jy ! Component: 650 - total flux cleaned = -0.00109522 Jy ! Component: 700 - total flux cleaned = -0.00115758 Jy ! Component: 750 - total flux cleaned = -0.00119848 Jy ! Component: 800 - total flux cleaned = -0.00125933 Jy ! Component: 850 - total flux cleaned = -0.0012597 Jy ! Component: 900 - total flux cleaned = -0.00129946 Jy ! Component: 950 - total flux cleaned = -0.00127988 Jy ! Component: 1000 - total flux cleaned = -0.00131917 Jy ! Component: 1050 - total flux cleaned = -0.00133843 Jy ! Component: 1100 - total flux cleaned = -0.00129995 Jy ! Component: 1150 - total flux cleaned = -0.00131901 Jy ! Component: 1200 - total flux cleaned = -0.00128083 Jy ! Component: 1250 - total flux cleaned = -0.00122475 Jy ! Component: 1300 - total flux cleaned = -0.00128088 Jy ! Component: 1350 - total flux cleaned = -0.00126242 Jy ! Component: 1400 - total flux cleaned = -0.00126266 Jy ! Component: 1450 - total flux cleaned = -0.00129921 Jy ! Component: 1500 - total flux cleaned = -0.00133543 Jy ! Component: 1550 - total flux cleaned = -0.00137124 Jy ! Component: 1600 - total flux cleaned = -0.00135352 Jy ! Component: 1650 - total flux cleaned = -0.00137118 Jy ! Component: 1700 - total flux cleaned = -0.00137112 Jy ! Component: 1750 - total flux cleaned = -0.00142339 Jy ! Component: 1800 - total flux cleaned = -0.00140603 Jy ! Component: 1850 - total flux cleaned = -0.0014581 Jy ! Component: 1900 - total flux cleaned = -0.00149223 Jy ! Component: 1950 - total flux cleaned = -0.00152634 Jy ! Component: 2000 - total flux cleaned = -0.00149245 Jy ! Component: 2050 - total flux cleaned = -0.00157672 Jy ! Component: 2100 - total flux cleaned = -0.00157662 Jy ! Component: 2150 - total flux cleaned = -0.00160991 Jy ! Component: 2200 - total flux cleaned = -0.00160959 Jy ! Component: 2250 - total flux cleaned = -0.00160968 Jy ! Component: 2300 - total flux cleaned = -0.00159341 Jy ! Component: 2350 - total flux cleaned = -0.00164226 Jy ! Component: 2400 - total flux cleaned = -0.00169081 Jy ! Component: 2450 - total flux cleaned = -0.00162615 Jy ! Component: 2500 - total flux cleaned = -0.00169047 Jy ! Component: 2550 - total flux cleaned = -0.00165841 Jy ! Component: 2600 - total flux cleaned = -0.00162655 Jy ! Component: 2650 - total flux cleaned = -0.00162662 Jy ! Component: 2700 - total flux cleaned = -0.0015951 Jy ! Component: 2750 - total flux cleaned = -0.00161067 Jy ! Component: 2800 - total flux cleaned = -0.00161085 Jy ! Component: 2850 - total flux cleaned = -0.0015953 Jy ! Component: 2900 - total flux cleaned = -0.00157983 Jy ! Component: 2950 - total flux cleaned = -0.00165637 Jy ! Component: 3000 - total flux cleaned = -0.00168682 Jy ! Component: 3050 - total flux cleaned = -0.00162617 Jy ! Component: 3100 - total flux cleaned = -0.00161097 Jy ! Component: 3150 - total flux cleaned = -0.00164111 Jy ! Component: 3200 - total flux cleaned = -0.00162615 Jy ! Component: 3250 - total flux cleaned = -0.00162612 Jy ! Component: 3300 - total flux cleaned = -0.00164112 Jy ! Component: 3350 - total flux cleaned = -0.00167063 Jy ! Component: 3400 - total flux cleaned = -0.00164127 Jy ! Component: 3450 - total flux cleaned = -0.00168508 Jy ! Component: 3500 - total flux cleaned = -0.00165605 Jy ! Component: 3550 - total flux cleaned = -0.00164162 Jy ! Component: 3600 - total flux cleaned = -0.00164155 Jy ! Component: 3650 - total flux cleaned = -0.00171338 Jy ! Component: 3700 - total flux cleaned = -0.00172767 Jy ! Component: 3750 - total flux cleaned = -0.00168496 Jy ! Component: 3800 - total flux cleaned = -0.00174183 Jy ! Component: 3850 - total flux cleaned = -0.00171345 Jy ! Component: 3900 - total flux cleaned = -0.00165723 Jy ! Component: 3950 - total flux cleaned = -0.00172727 Jy ! Component: 4000 - total flux cleaned = -0.00176911 Jy ! Component: 4050 - total flux cleaned = -0.00169962 Jy ! Total flux subtracted in 4096 components = -0.00167192 Jy ! Clean residual min=-0.000909 max=0.000841 Jy/beam ! Clean residual mean=-0.000000 rms=0.000241 Jy/beam ! Combined flux in latest and established models = 0.289512 Jy keep ! Adding 327 model components to the UV plane model. ! The established model now contains 428 components and 0.289512 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J0323+0145_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8076 x 1.946 at -2.478 degrees (North through East) ! Clean map min=-0.0016736 max=0.21672 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J0323+0145_X_map.fits wmodel /vlbi/uf001/uva//J0323+0145_X_map.mod ! Writing 428 model components to file: /vlbi/uf001/uva//J0323+0145_X_map.mod wobs /vlbi/uf001/uva//J0323+0145_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J0323+0145_X_uvs.fits wwins /vlbi/uf001/uva//J0323+0145_X_map.win ! wwins: Wrote 9 windows to /vlbi/uf001/uva//J0323+0145_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.216725 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000241631 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.334477 0.334477 0.668953 1.33791 2.67581 5.35162 10.7032 21.4065 42.813 85.626 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.216 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 896.923 quit ! Quitting program ! Log file /vlbi/uf001/uva//J0323+0145_X_dfm.log closed on Sun Jan 13 21:47:06 2019