! Started logfile: /vlbi/uf001/uva//J0309-0559_S_dfm.log on Sun Jan 13 21:42:09 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /vlbi/uf001/uva//J0309-0559_S_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J0309-0559_S_uva.fits ! AN table 1: 57 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.821832 visibilities/baseline/integration-bin. ! Found source: J0309-0559 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 6324 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0309-0559_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 57 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 57 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 57 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.007538Jy sigma=19.304791 ! Fit after self-cal, rms=0.907160Jy sigma=17.357716 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.81 mas, bmaj=6.89 mas, bpa=0.6005 degrees ! Estimated noise=0.629036 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0752115 Jy ! Component: 100 - total flux cleaned = 0.0916181 Jy ! Total flux subtracted in 100 components = 0.0916181 Jy ! Clean residual min=-0.003448 max=0.004618 Jy/beam ! Clean residual mean=-0.000004 rms=0.000913 Jy/beam ! Combined flux in latest and established models = 0.0916181 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.0916181 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.070924Jy sigma=1.296821 ! Fit after self-cal, rms=0.070911Jy sigma=1.296666 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.328 mas, bmaj=7.744 mas, bpa=0.5675 degrees ! Estimated noise=0.475629 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00325059 Jy ! Component: 100 - total flux cleaned = 0.00320089 Jy ! Component: 150 - total flux cleaned = 0.00300519 Jy ! Component: 200 - total flux cleaned = 0.00292901 Jy ! Total flux subtracted in 200 components = 0.00292901 Jy ! Clean residual min=-0.002741 max=0.002629 Jy/beam ! Clean residual mean=-0.000003 rms=0.000691 Jy/beam ! Combined flux in latest and established models = 0.0945471 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 16 components and 0.0945471 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.070754Jy sigma=1.292136 ! Fit after self-cal, rms=0.070752Jy sigma=1.292101 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.328 x 7.744 at 0.5675 degrees (North through East) ! Clean map min=-0.0026031 max=0.096811 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.97 HN 0.95 KP 0.98 ! LA 0.97 MK 1.00 NL 1.01 OV 0.97 ! PT 1.25 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.96 HN 1.01 KP 0.99 ! LA 1.08 MK 0.97 NL 0.95 OV 1.01 ! PT 1.02 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.96 HN 1.02 KP 0.98 ! LA 0.99 MK 1.03 NL 1.00 OV 0.95 ! PT 1.03 SC 1.02 ! ! ! Fit before self-cal, rms=0.070752Jy sigma=1.292101 ! Fit after self-cal, rms=0.070607Jy sigma=1.286784 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.333 mas, bmaj=7.743 mas, bpa=0.5743 degrees ! Estimated noise=0.470876 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000368271 Jy ! Component: 100 - total flux cleaned = -0.00055994 Jy ! Component: 150 - total flux cleaned = -0.000680331 Jy ! Component: 200 - total flux cleaned = -0.000749627 Jy ! Total flux subtracted in 200 components = -0.000749627 Jy ! Clean residual min=-0.002499 max=0.002630 Jy/beam ! Clean residual mean=-0.000001 rms=0.000630 Jy/beam ! Combined flux in latest and established models = 0.0937975 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 23 components and 0.0937975 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.070591Jy sigma=1.286480 ! Fit after self-cal, rms=0.070625Jy sigma=1.286323 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.070625Jy sigma=1.286323 ! Fit after self-cal, rms=0.072036Jy sigma=1.279802 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.337 mas, bmaj=7.746 mas, bpa=0.5713 degrees ! Estimated noise=0.47081 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000114547 Jy ! Component: 100 - total flux cleaned = -0.000130594 Jy ! Component: 150 - total flux cleaned = -0.000143889 Jy ! Component: 200 - total flux cleaned = -0.000156423 Jy ! Total flux subtracted in 200 components = -0.000156423 Jy ! Clean residual min=-0.002594 max=0.002405 Jy/beam ! Clean residual mean=0.000002 rms=0.000581 Jy/beam ! Combined flux in latest and established models = 0.0936411 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 30 components and 0.0936411 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.072030Jy sigma=1.279647 ! Fit after self-cal, rms=0.072080Jy sigma=1.279494 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.83382e-05 Jy ! Component: 100 - total flux cleaned = -5.89405e-05 Jy ! Component: 150 - total flux cleaned = -6.88139e-05 Jy ! Component: 200 - total flux cleaned = -8.75561e-05 Jy ! Total flux subtracted in 200 components = -8.75561e-05 Jy ! Clean residual min=-0.002599 max=0.002409 Jy/beam ! Clean residual mean=0.000001 rms=0.000578 Jy/beam ! Combined flux in latest and established models = 0.0935535 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 33 components and 0.0935535 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.072077Jy sigma=1.279424 ! Fit after self-cal, rms=0.072076Jy sigma=1.279417 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.072076Jy sigma=1.279417 ! Fit after self-cal, rms=0.072191Jy sigma=1.279361 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.338 mas, bmaj=7.745 mas, bpa=0.6102 degrees ! Estimated noise=0.470366 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000185347 Jy ! Component: 100 - total flux cleaned = -0.000206642 Jy ! Component: 150 - total flux cleaned = -0.000225843 Jy ! Component: 200 - total flux cleaned = -0.000243654 Jy ! Total flux subtracted in 200 components = -0.000243654 Jy ! Clean residual min=-0.002610 max=0.002430 Jy/beam ! Clean residual mean=0.000002 rms=0.000579 Jy/beam ! Combined flux in latest and established models = 0.0933098 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 35 components and 0.0933098 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.072188Jy sigma=1.279312 ! Fit after self-cal, rms=0.072192Jy sigma=1.279309 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.46719e-06 Jy ! Component: 100 - total flux cleaned = -2.45152e-05 Jy ! Component: 150 - total flux cleaned = -3.21994e-05 Jy ! Component: 200 - total flux cleaned = -3.98383e-05 Jy ! Total flux subtracted in 200 components = -3.98383e-05 Jy ! Clean residual min=-0.002621 max=0.002440 Jy/beam ! Clean residual mean=0.000002 rms=0.000578 Jy/beam ! Combined flux in latest and established models = 0.09327 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 38 components and 0.09327 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.072190Jy sigma=1.279279 ! Fit after self-cal, rms=0.072190Jy sigma=1.279278 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.072190Jy sigma=1.279278 ! Fit after self-cal, rms=0.072120Jy sigma=1.279269 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.293 mas, bmaj=12.25 mas, bpa=6.601 degrees ! Estimated noise=0.603457 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000508441 Jy ! Component: 100 - total flux cleaned = -0.000520365 Jy ! Component: 150 - total flux cleaned = -0.000520161 Jy ! Component: 200 - total flux cleaned = -0.000519983 Jy ! Total flux subtracted in 200 components = -0.000519983 Jy ! Clean residual min=-0.003211 max=0.002521 Jy/beam ! Clean residual mean=0.000004 rms=0.000753 Jy/beam ! Combined flux in latest and established models = 0.09275 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 42 components and 0.09275 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.072120Jy sigma=1.279271 ! Fit after self-cal, rms=0.072118Jy sigma=1.279243 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.73576e-05 Jy ! Component: 100 - total flux cleaned = -1.76352e-05 Jy ! Component: 150 - total flux cleaned = -2.57776e-05 Jy ! Component: 200 - total flux cleaned = -3.37802e-05 Jy ! Total flux subtracted in 200 components = -3.37802e-05 Jy ! Clean residual min=-0.003226 max=0.002519 Jy/beam ! Clean residual mean=0.000004 rms=0.000752 Jy/beam ! Combined flux in latest and established models = 0.0927162 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 47 components and 0.0927162 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.072119Jy sigma=1.279261 ! Fit after self-cal, rms=0.072119Jy sigma=1.279244 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.34 mas, bmaj=7.745 mas, bpa=0.655 degrees ! Estimated noise=0.470041 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.34 x 7.745 at 0.655 degrees (North through East) ! Clean map min=-0.0025464 max=0.096306 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.819 mas, bmaj=6.899 mas, bpa=0.7158 degrees ! Estimated noise=0.623303 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0745036 Jy ! Component: 100 - total flux cleaned = 0.0908074 Jy ! Component: 150 - total flux cleaned = 0.0944104 Jy ! Component: 200 - total flux cleaned = 0.0947361 Jy ! Total flux subtracted in 200 components = 0.0947361 Jy ! Clean residual min=-0.002724 max=0.003017 Jy/beam ! Clean residual mean=-0.000001 rms=0.000757 Jy/beam ! Combined flux in latest and established models = 0.0947361 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0947361 Jy ! Inverting map and beam ! Estimated beam: bmin=3.34 mas, bmaj=7.745 mas, bpa=0.655 degrees ! Estimated noise=0.470041 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000964297 Jy ! Component: 100 - total flux cleaned = -0.000957101 Jy ! Component: 150 - total flux cleaned = -0.00103512 Jy ! Component: 200 - total flux cleaned = -0.00108359 Jy ! Total flux subtracted in 200 components = -0.00108359 Jy ! Clean residual min=-0.002553 max=0.002440 Jy/beam ! Clean residual mean=0.000002 rms=0.000586 Jy/beam ! Combined flux in latest and established models = 0.0936525 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 29 components and 0.0936525 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.293 mas, bmaj=12.25 mas, bpa=6.601 degrees ! Estimated noise=0.603457 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000473604 Jy ! Component: 100 - total flux cleaned = -0.00050448 Jy ! Component: 150 - total flux cleaned = -0.00050474 Jy ! Component: 200 - total flux cleaned = -0.000516683 Jy ! Total flux subtracted in 200 components = -0.000516683 Jy ! Clean residual min=-0.003151 max=0.002546 Jy/beam ! Clean residual mean=0.000004 rms=0.000757 Jy/beam ! Combined flux in latest and established models = 0.0931358 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.18529e-05 Jy ! Component: 100 - total flux cleaned = -1.23171e-05 Jy ! Component: 150 - total flux cleaned = -3.32866e-05 Jy ! Component: 200 - total flux cleaned = -4.34846e-05 Jy ! Total flux subtracted in 200 components = -4.34846e-05 Jy ! Clean residual min=-0.003170 max=0.002543 Jy/beam ! Clean residual mean=0.000004 rms=0.000755 Jy/beam ! Combined flux in latest and established models = 0.0930923 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 38 components and 0.0930923 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.34 mas, bmaj=7.745 mas, bpa=0.655 degrees ! Estimated noise=0.470041 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000191013 Jy ! Component: 100 - total flux cleaned = 0.000123902 Jy ! Component: 150 - total flux cleaned = 0.000106413 Jy ! Component: 200 - total flux cleaned = 9.20694e-05 Jy ! Total flux subtracted in 200 components = 9.20694e-05 Jy ! Clean residual min=-0.002631 max=0.002431 Jy/beam ! Clean residual mean=0.000002 rms=0.000579 Jy/beam ! Combined flux in latest and established models = 0.0931844 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 53 components and 0.0931844 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.072121Jy sigma=1.279404 ! Fit after self-cal, rms=0.072121Jy sigma=1.279389 wmodel J0309-0559_S_map.mod ! Writing 53 model components to file: J0309-0559_S_map.mod wobs J0309-0559_S_uvs.fits ! Writing UV FITS file: J0309-0559_S_uvs.fits wwins J0309-0559_S_map.win ! wwins: Wrote 1 windows to J0309-0559_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000116193 Jy ! Component: 100 - total flux cleaned = -0.000118928 Jy ! Component: 150 - total flux cleaned = -5.50215e-06 Jy ! Component: 200 - total flux cleaned = -4.06794e-05 Jy ! Component: 250 - total flux cleaned = -6.05312e-06 Jy ! Component: 300 - total flux cleaned = -5.85197e-06 Jy ! Component: 350 - total flux cleaned = 5.7591e-05 Jy ! Component: 400 - total flux cleaned = 8.80229e-05 Jy ! Component: 450 - total flux cleaned = 0.000147831 Jy ! Component: 500 - total flux cleaned = 0.00011777 Jy ! Component: 550 - total flux cleaned = 0.000145881 Jy ! Component: 600 - total flux cleaned = 3.28105e-05 Jy ! Component: 650 - total flux cleaned = 5.43232e-06 Jy ! Component: 700 - total flux cleaned = -7.46473e-05 Jy ! Component: 750 - total flux cleaned = -4.79676e-05 Jy ! Component: 800 - total flux cleaned = -2.23379e-05 Jy ! Component: 850 - total flux cleaned = -2.28443e-05 Jy ! Component: 900 - total flux cleaned = -7.25946e-05 Jy ! Component: 950 - total flux cleaned = -9.72239e-05 Jy ! Component: 1000 - total flux cleaned = -0.000194395 Jy ! Component: 1050 - total flux cleaned = -0.000218872 Jy ! Component: 1100 - total flux cleaned = -0.000266406 Jy ! Component: 1150 - total flux cleaned = -0.000429264 Jy ! Component: 1200 - total flux cleaned = -0.000543825 Jy ! Component: 1250 - total flux cleaned = -0.000611204 Jy ! Component: 1300 - total flux cleaned = -0.000767352 Jy ! Component: 1350 - total flux cleaned = -0.000855131 Jy ! Component: 1400 - total flux cleaned = -0.000855321 Jy ! Component: 1450 - total flux cleaned = -0.00100586 Jy ! Component: 1500 - total flux cleaned = -0.00104831 Jy ! Component: 1550 - total flux cleaned = -0.00115304 Jy ! Component: 1600 - total flux cleaned = -0.00131832 Jy ! Component: 1650 - total flux cleaned = -0.00142008 Jy ! Component: 1700 - total flux cleaned = -0.00148074 Jy ! Component: 1750 - total flux cleaned = -0.00158081 Jy ! Component: 1800 - total flux cleaned = -0.00164005 Jy ! Component: 1850 - total flux cleaned = -0.00171857 Jy ! Component: 1900 - total flux cleaned = -0.00179621 Jy ! Component: 1950 - total flux cleaned = -0.0019687 Jy ! Component: 2000 - total flux cleaned = -0.00200644 Jy ! Component: 2050 - total flux cleaned = -0.00211932 Jy ! Component: 2100 - total flux cleaned = -0.00223102 Jy ! Component: 2150 - total flux cleaned = -0.00232305 Jy ! Component: 2200 - total flux cleaned = -0.00241406 Jy ! Component: 2250 - total flux cleaned = -0.0024863 Jy ! Component: 2300 - total flux cleaned = -0.00259379 Jy ! Component: 2350 - total flux cleaned = -0.00268236 Jy ! Component: 2400 - total flux cleaned = -0.00282269 Jy ! Component: 2450 - total flux cleaned = -0.00289216 Jy ! Component: 2500 - total flux cleaned = -0.00294375 Jy ! Component: 2550 - total flux cleaned = -0.00299475 Jy ! Component: 2600 - total flux cleaned = -0.00316386 Jy ! Component: 2650 - total flux cleaned = -0.00324771 Jy ! Component: 2700 - total flux cleaned = -0.00333076 Jy ! Component: 2750 - total flux cleaned = -0.0034297 Jy ! Component: 2800 - total flux cleaned = -0.00346238 Jy ! Component: 2850 - total flux cleaned = -0.00362422 Jy ! Component: 2900 - total flux cleaned = -0.00368846 Jy ! Component: 2950 - total flux cleaned = -0.00375239 Jy ! Component: 3000 - total flux cleaned = -0.00394184 Jy ! Component: 3050 - total flux cleaned = -0.00403573 Jy ! Component: 3100 - total flux cleaned = -0.00409769 Jy ! Component: 3150 - total flux cleaned = -0.00420556 Jy ! Component: 3200 - total flux cleaned = -0.00429718 Jy ! Component: 3250 - total flux cleaned = -0.00438821 Jy ! Component: 3300 - total flux cleaned = -0.00450856 Jy ! Component: 3350 - total flux cleaned = -0.004598 Jy ! Component: 3400 - total flux cleaned = -0.00474595 Jy ! Component: 3450 - total flux cleaned = -0.00481945 Jy ! Component: 3500 - total flux cleaned = -0.0049069 Jy ! Component: 3550 - total flux cleaned = -0.00506594 Jy ! Component: 3600 - total flux cleaned = -0.00512334 Jy ! Component: 3650 - total flux cleaned = -0.00523736 Jy ! Component: 3700 - total flux cleaned = -0.00533637 Jy ! Component: 3750 - total flux cleaned = -0.00544874 Jy ! Component: 3800 - total flux cleaned = -0.00547666 Jy ! Component: 3850 - total flux cleaned = -0.00560146 Jy ! Component: 3900 - total flux cleaned = -0.00565645 Jy ! Component: 3950 - total flux cleaned = -0.00575197 Jy ! Component: 4000 - total flux cleaned = -0.00584677 Jy ! Component: 4050 - total flux cleaned = -0.00591379 Jy ! Total flux subtracted in 4096 components = -0.00596718 Jy ! Clean residual min=-0.000704 max=0.000702 Jy/beam ! Clean residual mean=-0.000001 rms=0.000254 Jy/beam ! Combined flux in latest and established models = 0.0872172 Jy keep ! Adding 329 model components to the UV plane model. ! The established model now contains 382 components and 0.0872173 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J0309-0559_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.34 x 7.745 at 0.655 degrees (North through East) ! Clean map min=-0.0017038 max=0.095833 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J0309-0559_S_map.fits wmodel /vlbi/uf001/uva//J0309-0559_S_map.mod ! Writing 382 model components to file: /vlbi/uf001/uva//J0309-0559_S_map.mod wobs /vlbi/uf001/uva//J0309-0559_S_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J0309-0559_S_uvs.fits wwins /vlbi/uf001/uva//J0309-0559_S_map.win ! wwins: Wrote 2 windows to /vlbi/uf001/uva//J0309-0559_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0958335 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000253246 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.79277 0.79277 1.58554 3.17108 6.34216 12.6843 25.3686 50.7373 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.095 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 378.42 quit ! Quitting program ! Log file /vlbi/uf001/uva//J0309-0559_S_dfm.log closed on Sun Jan 13 21:42:13 2019