! Started logfile: /vlbi/uf001/uva//J0305-2421_S_b_dfm.log on Sun Jan 13 21:40:49 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J0305-2421_S_b_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0305-2421_S_b_uva.fits
! AN table 1: 148 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.875 visibilities/baseline/integration-bin.
! Found source: J0305-2421
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 10878 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0305-2421_S_b]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 104 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 104 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 104 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.002685Jy  sigma=16.344981
! Fit after  self-cal, rms=0.957529Jy  sigma=15.634516
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.721 mas, bmaj=14.19 mas, bpa=-24.45 degrees
! Estimated noise=0.882781 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0347962 Jy
! Component: 100  -  total flux cleaned = 0.0424525 Jy
! Total flux subtracted in 100 components = 0.0424525 Jy
! Clean residual min=-0.003670 max=0.003790 Jy/beam
! Clean residual mean=0.000005 rms=0.000937 Jy/beam
! Combined flux in latest and established models = 0.0424525 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.0424525 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076828Jy  sigma=1.172439
! Fit after  self-cal, rms=0.075435Jy  sigma=1.150334
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.358 mas, bmaj=15.72 mas, bpa=-22.92 degrees
! Estimated noise=0.428504 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00409925 Jy
! Component: 100  -  total flux cleaned = 0.00411782 Jy
! Component: 150  -  total flux cleaned = 0.00408094 Jy
! Component: 200  -  total flux cleaned = 0.0040494 Jy
! Total flux subtracted in 200 components = 0.0040494 Jy
! Clean residual min=-0.002166 max=0.002625 Jy/beam
! Clean residual mean=0.000011 rms=0.000635 Jy/beam
! Combined flux in latest and established models = 0.0465019 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 25 components and 0.0465019 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075194Jy  sigma=1.147163
! Fit after  self-cal, rms=0.075153Jy  sigma=1.146995
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.358 x 15.72 at -22.92 degrees (North through East)
! Clean map  min=-0.0020336  max=0.04712 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     HN        1.00     KP        1.06     LA        0.89     
!   MK        1.00     NL        1.11     OV        1.00     PT        1.15     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.73     HN        0.97     KP        1.00     LA        0.89     
!   MK        1.03     NL        1.13     OV        0.94     PT        1.14     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     HN        1.00     KP        1.03     LA        0.99     
!   MK        1.00     NL        0.88     OV        1.01     PT        1.12     
! 
! 
! Fit before self-cal, rms=0.075153Jy  sigma=1.146995
! Fit after  self-cal, rms=0.072308Jy  sigma=1.142041
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.376 mas, bmaj=15.41 mas, bpa=-22.9 degrees
! Estimated noise=0.42412 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.25741e-06 Jy
! Component: 100  -  total flux cleaned = 1.35302e-05 Jy
! Component: 150  -  total flux cleaned = 1.47443e-05 Jy
! Component: 200  -  total flux cleaned = -1.32023e-05 Jy
! Total flux subtracted in 200 components = -1.32023e-05 Jy
! Clean residual min=-0.001786 max=0.001701 Jy/beam
! Clean residual mean=0.000003 rms=0.000443 Jy/beam
! Combined flux in latest and established models = 0.0464887 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 39 components and 0.0464887 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072299Jy  sigma=1.141902
! Fit after  self-cal, rms=0.072379Jy  sigma=1.140092
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072379Jy  sigma=1.140092
! Fit after  self-cal, rms=0.072587Jy  sigma=1.138589
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.383 mas, bmaj=15.29 mas, bpa=-22.83 degrees
! Estimated noise=0.424149 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000484578 Jy
! Component: 100  -  total flux cleaned = -0.000572752 Jy
! Component: 150  -  total flux cleaned = -0.000590504 Jy
! Component: 200  -  total flux cleaned = -0.000615292 Jy
! Total flux subtracted in 200 components = -0.000615292 Jy
! Clean residual min=-0.001670 max=0.001663 Jy/beam
! Clean residual mean=0.000002 rms=0.000385 Jy/beam
! Combined flux in latest and established models = 0.0458734 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 48 components and 0.0458734 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072582Jy  sigma=1.138532
! Fit after  self-cal, rms=0.072678Jy  sigma=1.137874
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000259849 Jy
! Component: 100  -  total flux cleaned = -0.000342635 Jy
! Component: 150  -  total flux cleaned = -0.000398188 Jy
! Component: 200  -  total flux cleaned = -0.000423764 Jy
! Total flux subtracted in 200 components = -0.000423764 Jy
! Clean residual min=-0.001624 max=0.001612 Jy/beam
! Clean residual mean=0.000002 rms=0.000393 Jy/beam
! Combined flux in latest and established models = 0.0454497 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 55 components and 0.0454496 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072675Jy  sigma=1.137827
! Fit after  self-cal, rms=0.072679Jy  sigma=1.137810
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072679Jy  sigma=1.137810
! Fit after  self-cal, rms=0.073463Jy  sigma=1.137517
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.392 mas, bmaj=15.26 mas, bpa=-22.76 degrees
! Estimated noise=0.425505 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000222488 Jy
! Component: 100  -  total flux cleaned = -0.000262955 Jy
! Component: 150  -  total flux cleaned = -0.000280037 Jy
! Component: 200  -  total flux cleaned = -0.000287575 Jy
! Total flux subtracted in 200 components = -0.000287575 Jy
! Clean residual min=-0.001550 max=0.001558 Jy/beam
! Clean residual mean=0.000004 rms=0.000389 Jy/beam
! Combined flux in latest and established models = 0.0451621 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 66 components and 0.0451621 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.073459Jy  sigma=1.137481
! Fit after  self-cal, rms=0.073537Jy  sigma=1.137234
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.75152e-05 Jy
! Component: 100  -  total flux cleaned = -0.000142997 Jy
! Component: 150  -  total flux cleaned = -0.000185147 Jy
! Component: 200  -  total flux cleaned = -0.000208471 Jy
! Total flux subtracted in 200 components = -0.000208471 Jy
! Clean residual min=-0.001563 max=0.001502 Jy/beam
! Clean residual mean=0.000003 rms=0.000392 Jy/beam
! Combined flux in latest and established models = 0.0449536 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 68 components and 0.0449536 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.073535Jy  sigma=1.137205
! Fit after  self-cal, rms=0.073540Jy  sigma=1.137201
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.073540Jy  sigma=1.137201
! Fit after  self-cal, rms=0.074029Jy  sigma=1.137133
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.932 mas, bmaj=21.93 mas, bpa=-10.15 degrees
! Estimated noise=0.518302 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000441132 Jy
! Component: 100  -  total flux cleaned = -0.000502369 Jy
! Component: 150  -  total flux cleaned = -0.000563659 Jy
! Component: 200  -  total flux cleaned = -0.000614392 Jy
! Total flux subtracted in 200 components = -0.000614392 Jy
! Clean residual min=-0.001481 max=0.001885 Jy/beam
! Clean residual mean=0.000005 rms=0.000511 Jy/beam
! Combined flux in latest and established models = 0.0443392 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 71 components and 0.0443392 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074028Jy  sigma=1.137119
! Fit after  self-cal, rms=0.074069Jy  sigma=1.137078
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000183922 Jy
! Component: 100  -  total flux cleaned = -0.000231728 Jy
! Component: 150  -  total flux cleaned = -0.000267778 Jy
! Component: 200  -  total flux cleaned = -0.0002891 Jy
! Total flux subtracted in 200 components = -0.0002891 Jy
! Clean residual min=-0.001532 max=0.001884 Jy/beam
! Clean residual mean=0.000004 rms=0.000516 Jy/beam
! Combined flux in latest and established models = 0.0440501 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 76 components and 0.0440501 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074069Jy  sigma=1.137079
! Fit after  self-cal, rms=0.074075Jy  sigma=1.137073
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.398 mas, bmaj=15.25 mas, bpa=-22.72 degrees
! Estimated noise=0.426444 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.398 x 15.25 at -22.72 degrees (North through East)
! Clean map  min=-0.0022732  max=0.04709 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.755 mas, bmaj=13.93 mas, bpa=-24.23 degrees
! Estimated noise=0.899014 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0368056 Jy
! Component: 100  -  total flux cleaned = 0.0449561 Jy
! Component: 150  -  total flux cleaned = 0.0456179 Jy
! Component: 200  -  total flux cleaned = 0.0456211 Jy
! Total flux subtracted in 200 components = 0.0456211 Jy
! Clean residual min=-0.003052 max=0.002548 Jy/beam
! Clean residual mean=0.000007 rms=0.000742 Jy/beam
! Combined flux in latest and established models = 0.0456211 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.0456211 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.398 mas, bmaj=15.25 mas, bpa=-22.72 degrees
! Estimated noise=0.426444 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.76168e-05 Jy
! Component: 100  -  total flux cleaned = -0.000264231 Jy
! Component: 150  -  total flux cleaned = -0.000377722 Jy
! Component: 200  -  total flux cleaned = -0.000470306 Jy
! Total flux subtracted in 200 components = -0.000470306 Jy
! Clean residual min=-0.001675 max=0.001546 Jy/beam
! Clean residual mean=0.000006 rms=0.000412 Jy/beam
! Combined flux in latest and established models = 0.0451508 Jy
! Adding 14 model components to the UV plane model.
! The established model now contains 33 components and 0.0451508 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.932 mas, bmaj=21.93 mas, bpa=-10.15 degrees
! Estimated noise=0.518302 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000379079 Jy
! Component: 100  -  total flux cleaned = -0.000531483 Jy
! Component: 150  -  total flux cleaned = -0.000658212 Jy
! Component: 200  -  total flux cleaned = -0.000755304 Jy
! Total flux subtracted in 200 components = -0.000755304 Jy
! Clean residual min=-0.001570 max=0.001946 Jy/beam
! Clean residual mean=0.000009 rms=0.000530 Jy/beam
! Combined flux in latest and established models = 0.0443955 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.75765e-05 Jy
! Component: 100  -  total flux cleaned = -0.000144888 Jy
! Component: 150  -  total flux cleaned = -0.000198222 Jy
! Component: 200  -  total flux cleaned = -0.000247444 Jy
! Total flux subtracted in 200 components = -0.000247444 Jy
! Clean residual min=-0.001539 max=0.001917 Jy/beam
! Clean residual mean=0.000007 rms=0.000525 Jy/beam
! Combined flux in latest and established models = 0.0441481 Jy
! Adding 21 model components to the UV plane model.
! The established model now contains 51 components and 0.0441481 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.398 mas, bmaj=15.25 mas, bpa=-22.72 degrees
! Estimated noise=0.426444 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.3009e-07 Jy
! Component: 100  -  total flux cleaned = 8.65446e-05 Jy
! Component: 150  -  total flux cleaned = 0.000113897 Jy
! Component: 200  -  total flux cleaned = 0.000137132 Jy
! Total flux subtracted in 200 components = 0.000137132 Jy
! Clean residual min=-0.001576 max=0.001501 Jy/beam
! Clean residual mean=0.000004 rms=0.000396 Jy/beam
! Combined flux in latest and established models = 0.0442852 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 68 components and 0.0442852 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074074Jy  sigma=1.137120
! Fit after  self-cal, rms=0.074072Jy  sigma=1.137053
wmodel J0305-2421_S_b_map.mod
! Writing 68 model components to file: J0305-2421_S_b_map.mod
wobs   J0305-2421_S_b_uvs.fits
! Writing UV FITS file: J0305-2421_S_b_uvs.fits
wwins  J0305-2421_S_b_map.win
! wwins: Wrote 1 windows to J0305-2421_S_b_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 1.75916e-05 Jy
! Component: 100  -  total flux cleaned = 0.00024182 Jy
! Component: 150  -  total flux cleaned = 0.00045461 Jy
! Component: 200  -  total flux cleaned = 0.000611508 Jy
! Component: 250  -  total flux cleaned = 0.000761125 Jy
! Component: 300  -  total flux cleaned = 0.00082216 Jy
! Component: 350  -  total flux cleaned = 0.000861025 Jy
! Component: 400  -  total flux cleaned = 0.000917569 Jy
! Component: 450  -  total flux cleaned = 0.0010087 Jy
! Component: 500  -  total flux cleaned = 0.00104423 Jy
! Component: 550  -  total flux cleaned = 0.00109585 Jy
! Component: 600  -  total flux cleaned = 0.00116277 Jy
! Component: 650  -  total flux cleaned = 0.00116223 Jy
! Component: 700  -  total flux cleaned = 0.0011777 Jy
! Component: 750  -  total flux cleaned = 0.00117753 Jy
! Component: 800  -  total flux cleaned = 0.00117748 Jy
! Component: 850  -  total flux cleaned = 0.00120703 Jy
! Component: 900  -  total flux cleaned = 0.00127945 Jy
! Component: 950  -  total flux cleaned = 0.00132198 Jy
! Component: 1000  -  total flux cleaned = 0.00137756 Jy
! Component: 1050  -  total flux cleaned = 0.0013771 Jy
! Component: 1100  -  total flux cleaned = 0.0013503 Jy
! Component: 1150  -  total flux cleaned = 0.00133714 Jy
! Component: 1200  -  total flux cleaned = 0.00131125 Jy
! Component: 1250  -  total flux cleaned = 0.00132412 Jy
! Component: 1300  -  total flux cleaned = 0.0012989 Jy
! Component: 1350  -  total flux cleaned = 0.00126154 Jy
! Component: 1400  -  total flux cleaned = 0.0011879 Jy
! Component: 1450  -  total flux cleaned = 0.00116361 Jy
! Component: 1500  -  total flux cleaned = 0.00109193 Jy
! Component: 1550  -  total flux cleaned = 0.0010567 Jy
! Component: 1600  -  total flux cleaned = 0.000987027 Jy
! Component: 1650  -  total flux cleaned = 0.000987153 Jy
! Component: 1700  -  total flux cleaned = 0.000918942 Jy
! Component: 1750  -  total flux cleaned = 0.00091885 Jy
! Component: 1800  -  total flux cleaned = 0.000885284 Jy
! Component: 1850  -  total flux cleaned = 0.000863295 Jy
! Component: 1900  -  total flux cleaned = 0.000819775 Jy
! Component: 1950  -  total flux cleaned = 0.000798288 Jy
! Component: 2000  -  total flux cleaned = 0.000734533 Jy
! Component: 2050  -  total flux cleaned = 0.000745155 Jy
! Component: 2100  -  total flux cleaned = 0.000714113 Jy
! Component: 2150  -  total flux cleaned = 0.000734809 Jy
! Component: 2200  -  total flux cleaned = 0.000734771 Jy
! Component: 2250  -  total flux cleaned = 0.000714579 Jy
! Component: 2300  -  total flux cleaned = 0.000684574 Jy
! Component: 2350  -  total flux cleaned = 0.000694448 Jy
! Component: 2400  -  total flux cleaned = 0.000654993 Jy
! Component: 2450  -  total flux cleaned = 0.000645213 Jy
! Component: 2500  -  total flux cleaned = 0.000635553 Jy
! Component: 2550  -  total flux cleaned = 0.000635602 Jy
! Component: 2600  -  total flux cleaned = 0.000616519 Jy
! Component: 2650  -  total flux cleaned = 0.000588055 Jy
! Component: 2700  -  total flux cleaned = 0.000550459 Jy
! Component: 2750  -  total flux cleaned = 0.000522355 Jy
! Component: 2800  -  total flux cleaned = 0.000485129 Jy
! Component: 2850  -  total flux cleaned = 0.000457432 Jy
! Component: 2900  -  total flux cleaned = 0.000420794 Jy
! Component: 2950  -  total flux cleaned = 0.000429956 Jy
! Component: 3000  -  total flux cleaned = 0.000384648 Jy
! Component: 3050  -  total flux cleaned = 0.00037567 Jy
! Component: 3100  -  total flux cleaned = 0.000366736 Jy
! Component: 3150  -  total flux cleaned = 0.000340034 Jy
! Component: 3200  -  total flux cleaned = 0.000322316 Jy
! Component: 3250  -  total flux cleaned = 0.000295879 Jy
! Component: 3300  -  total flux cleaned = 0.00027838 Jy
! Component: 3350  -  total flux cleaned = 0.000252289 Jy
! Component: 3400  -  total flux cleaned = 0.000234982 Jy
! Component: 3450  -  total flux cleaned = 0.000226319 Jy
! Component: 3500  -  total flux cleaned = 0.000192072 Jy
! Component: 3550  -  total flux cleaned = 0.000183522 Jy
! Component: 3600  -  total flux cleaned = 0.000183424 Jy
! Component: 3650  -  total flux cleaned = 0.000124274 Jy
! Component: 3700  -  total flux cleaned = 0.000107486 Jy
! Component: 3750  -  total flux cleaned = 6.57033e-05 Jy
! Component: 3800  -  total flux cleaned = 4.90776e-05 Jy
! Component: 3850  -  total flux cleaned = 4.08163e-05 Jy
! Component: 3900  -  total flux cleaned = 4.08038e-05 Jy
! Component: 3950  -  total flux cleaned = -1.68064e-05 Jy
! Component: 4000  -  total flux cleaned = -2.49665e-05 Jy
! Component: 4050  -  total flux cleaned = -3.31613e-05 Jy
! Total flux subtracted in 4096 components = -4.13385e-05 Jy
! Clean residual min=-0.000447 max=0.000608 Jy/beam
! Clean residual mean=0.000000 rms=0.000143 Jy/beam
! Combined flux in latest and established models = 0.0442438 Jy
keep
! Adding 244 model components to the UV plane model.
! The established model now contains 312 components and 0.0442438 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0305-2421_S_b_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.398 x 15.25 at -22.72 degrees (North through East)
! Clean map  min=-0.002048  max=0.047022 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0305-2421_S_b_map.fits
wmodel /vlbi/uf001/uva//J0305-2421_S_b_map.mod
! Writing 312 model components to file: /vlbi/uf001/uva//J0305-2421_S_b_map.mod
wobs   /vlbi/uf001/uva//J0305-2421_S_b_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0305-2421_S_b_uvs.fits
wwins  /vlbi/uf001/uva//J0305-2421_S_b_map.win
! wwins: Wrote 2 windows to /vlbi/uf001/uva//J0305-2421_S_b_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0470222 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000138405 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.883018 0.883018 1.76604 3.53207 7.06414 14.1283 28.2566 56.5132
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.047 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  339.743 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0305-2421_S_b_dfm.log closed on Sun Jan 13 21:40:54 2019