! Started logfile: /vlbi/uf001/uva//J0301+0602_X_dfm.log on Sun Jan 13 21:38:19 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J0301+0602_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J0301+0602_X_uva.fits ! AN table 1: 42 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.902646 visibilities/baseline/integration-bin. ! Found source: J0301+0602 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 20472 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0301+0602_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 75 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 75 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 75 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 75 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 75 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 75 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 75 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 75 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 75 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 75 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 75 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 75 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.028334Jy sigma=22.344076 ! Fit after self-cal, rms=0.802995Jy sigma=17.553761 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.675 mas, bmaj=1.693 mas, bpa=-3.104 degrees ! Estimated noise=0.37083 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.135873 Jy ! Component: 100 - total flux cleaned = 0.198878 Jy ! Total flux subtracted in 100 components = 0.198878 Jy ! Clean residual min=-0.016294 max=0.067603 Jy/beam ! Clean residual mean=-0.000018 rms=0.004370 Jy/beam ! Combined flux in latest and established models = 0.198878 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.198878 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.132054Jy sigma=2.774552 ! Fit after self-cal, rms=0.130778Jy sigma=2.747760 ! Inverting map ! Added new window around map position (-1, -0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0622626 Jy ! Component: 100 - total flux cleaned = 0.0953831 Jy ! Total flux subtracted in 100 components = 0.0953831 Jy ! Clean residual min=-0.012355 max=0.039838 Jy/beam ! Clean residual mean=-0.000009 rms=0.002628 Jy/beam ! Combined flux in latest and established models = 0.294262 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 11 components and 0.294262 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087563Jy sigma=1.812836 ! Fit after self-cal, rms=0.083034Jy sigma=1.714915 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0279042 Jy ! Component: 100 - total flux cleaned = 0.0421213 Jy ! Total flux subtracted in 100 components = 0.0421213 Jy ! Clean residual min=-0.009076 max=0.021153 Jy/beam ! Clean residual mean=-0.000005 rms=0.001826 Jy/beam ! Combined flux in latest and established models = 0.336383 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 13 components and 0.336383 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071112Jy sigma=1.470515 ! Fit after self-cal, rms=0.069877Jy sigma=1.443068 ! Inverting map ! Added new window around map position (1.2, 0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0156194 Jy ! Component: 100 - total flux cleaned = 0.0237048 Jy ! Total flux subtracted in 100 components = 0.0237048 Jy ! Clean residual min=-0.008137 max=0.010553 Jy/beam ! Clean residual mean=-0.000002 rms=0.001492 Jy/beam ! Combined flux in latest and established models = 0.360088 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 19 components and 0.360088 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066278Jy sigma=1.369483 ! Fit after self-cal, rms=0.066197Jy sigma=1.368336 ! Inverting map ! Added new window around map position (-2.8, -1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00760737 Jy ! Component: 100 - total flux cleaned = 0.00963607 Jy ! Total flux subtracted in 100 components = 0.00963607 Jy ! Clean residual min=-0.007063 max=0.008685 Jy/beam ! Clean residual mean=-0.000002 rms=0.001373 Jy/beam ! Combined flux in latest and established models = 0.369724 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 26 components and 0.369724 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065121Jy sigma=1.345502 ! Fit after self-cal, rms=0.065021Jy sigma=1.343455 ! Inverting map ! Added new window around map position (2, 3.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00633382 Jy ! Component: 100 - total flux cleaned = 0.0069652 Jy ! Total flux subtracted in 100 components = 0.0069652 Jy ! Clean residual min=-0.006509 max=0.007460 Jy/beam ! Clean residual mean=-0.000001 rms=0.001291 Jy/beam ! Combined flux in latest and established models = 0.376689 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 35 components and 0.376689 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064209Jy sigma=1.327660 ! Fit after self-cal, rms=0.064158Jy sigma=1.326525 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8366 mas, bmaj=1.934 mas, bpa=-2.12 degrees ! Estimated noise=0.248612 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6.4, 8.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00651529 Jy ! Component: 100 - total flux cleaned = 0.00859537 Jy ! Component: 150 - total flux cleaned = 0.00904286 Jy ! Component: 200 - total flux cleaned = 0.00931 Jy ! Total flux subtracted in 200 components = 0.00931 Jy ! Clean residual min=-0.005340 max=0.007151 Jy/beam ! Clean residual mean=-0.000001 rms=0.001238 Jy/beam ! Combined flux in latest and established models = 0.385999 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 55 components and 0.385999 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063090Jy sigma=1.304510 ! Fit after self-cal, rms=0.062991Jy sigma=1.302558 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8366 x 1.934 at -2.12 degrees (North through East) ! Clean map min=-0.0051262 max=0.18239 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.02 HN 0.86 KP 1.01 ! LA 0.97 MK 1.01 NL 1.08 OV 0.92 ! PT 1.01 SC 0.91 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.02 HN 0.88 KP 1.01 ! LA 0.96 MK 1.00 NL 1.10 OV 0.94 ! PT 1.03 SC 0.89 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00 HN 0.89 KP 1.00 ! LA 0.98 MK 0.99 NL 1.10 OV 0.94 ! PT 1.02 SC 0.91 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.02 HN 0.89 KP 1.00 ! LA 0.97 MK 1.02 NL 1.10 OV 0.93 ! PT 1.03 SC 0.94 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00 HN 0.86 KP 1.02 ! LA 0.97 MK 1.02 NL 1.10 OV 0.92 ! PT 1.04 SC 0.93 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.03 HN 0.89 KP 1.01 ! LA 0.97 MK 1.00 NL 1.09 OV 0.93 ! PT 1.03 SC 0.91 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.03 HN 0.88 KP 1.00 ! LA 0.96 MK 1.00 NL 1.08 OV 0.94 ! PT 1.05 SC 0.92 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.04 HN 0.88 KP 1.00 ! LA 0.96 MK 1.01 NL 1.11 OV 0.93 ! PT 1.04 SC 0.92 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.02 HN 0.90 KP 1.01 ! LA 0.98 MK 1.00 NL 1.11 OV 0.94 ! PT 1.04 SC 0.91 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.02 HN 0.88 KP 1.00 ! LA 0.98 MK 1.01 NL 1.11 OV 0.94 ! PT 1.03 SC 0.92 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.05 HN 0.88 KP 1.00 ! LA 0.98 MK 1.08 NL 1.12 OV 0.94 ! PT 1.02 SC 0.89 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.02 HN 0.88 KP 0.99 ! LA 0.96 MK 1.00 NL 1.14 OV 0.95 ! PT 1.04 SC 0.91 ! ! ! Fit before self-cal, rms=0.062991Jy sigma=1.302558 ! Fit after self-cal, rms=0.057071Jy sigma=1.224831 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.825 mas, bmaj=1.921 mas, bpa=-1.38 degrees ! Estimated noise=0.243603 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000755261 Jy ! Component: 100 - total flux cleaned = -0.0014791 Jy ! Component: 150 - total flux cleaned = -0.00182214 Jy ! Component: 200 - total flux cleaned = -0.00211597 Jy ! Total flux subtracted in 200 components = -0.00211597 Jy ! Clean residual min=-0.003151 max=0.002684 Jy/beam ! Clean residual mean=-0.000002 rms=0.000626 Jy/beam ! Combined flux in latest and established models = 0.383883 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 84 components and 0.383883 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056774Jy sigma=1.217693 ! Fit after self-cal, rms=0.056764Jy sigma=1.217157 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056764Jy sigma=1.217157 ! Fit after self-cal, rms=0.055976Jy sigma=1.200094 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8242 mas, bmaj=1.92 mas, bpa=-1.32 degrees ! Estimated noise=0.243792 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000615355 Jy ! Component: 100 - total flux cleaned = -0.00104662 Jy ! Component: 150 - total flux cleaned = -0.00147585 Jy ! Component: 200 - total flux cleaned = -0.00185428 Jy ! Total flux subtracted in 200 components = -0.00185428 Jy ! Clean residual min=-0.002049 max=0.002060 Jy/beam ! Clean residual mean=-0.000000 rms=0.000431 Jy/beam ! Combined flux in latest and established models = 0.382029 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 97 components and 0.382029 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055828Jy sigma=1.196779 ! Fit after self-cal, rms=0.055817Jy sigma=1.196537 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000213378 Jy ! Component: 100 - total flux cleaned = -0.000554628 Jy ! Component: 150 - total flux cleaned = -0.000688128 Jy ! Component: 200 - total flux cleaned = -0.00089585 Jy ! Total flux subtracted in 200 components = -0.00089585 Jy ! Clean residual min=-0.001912 max=0.002026 Jy/beam ! Clean residual mean=-0.000000 rms=0.000416 Jy/beam ! Combined flux in latest and established models = 0.381133 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 103 components and 0.381133 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055746Jy sigma=1.194951 ! Fit after self-cal, rms=0.055739Jy sigma=1.194843 ! Inverting map ! Added new window around map position (-12.6, 6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000806268 Jy ! Component: 100 - total flux cleaned = 0.000622087 Jy ! Component: 150 - total flux cleaned = 0.000543069 Jy ! Component: 200 - total flux cleaned = 0.00043328 Jy ! Total flux subtracted in 200 components = 0.00043328 Jy ! Clean residual min=-0.001769 max=0.001791 Jy/beam ! Clean residual mean=-0.000000 rms=0.000397 Jy/beam ! Combined flux in latest and established models = 0.381566 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 117 components and 0.381566 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055657Jy sigma=1.192967 ! Fit after self-cal, rms=0.055650Jy sigma=1.192851 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055650Jy sigma=1.192851 ! Fit after self-cal, rms=0.055548Jy sigma=1.191904 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8241 mas, bmaj=1.92 mas, bpa=-1.248 degrees ! Estimated noise=0.243678 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000786918 Jy ! Component: 100 - total flux cleaned = -0.00113287 Jy ! Component: 150 - total flux cleaned = -0.00132477 Jy ! Component: 200 - total flux cleaned = -0.00157161 Jy ! Total flux subtracted in 200 components = -0.00157161 Jy ! Clean residual min=-0.001808 max=0.001586 Jy/beam ! Clean residual mean=0.000000 rms=0.000370 Jy/beam ! Combined flux in latest and established models = 0.379995 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 126 components and 0.379995 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055494Jy sigma=1.190723 ! Fit after self-cal, rms=0.055490Jy sigma=1.190654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000102029 Jy ! Component: 100 - total flux cleaned = -0.000332082 Jy ! Component: 150 - total flux cleaned = -0.000423527 Jy ! Component: 200 - total flux cleaned = -0.000538913 Jy ! Total flux subtracted in 200 components = -0.000538913 Jy ! Clean residual min=-0.001726 max=0.001564 Jy/beam ! Clean residual mean=0.000000 rms=0.000362 Jy/beam ! Combined flux in latest and established models = 0.379456 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 130 components and 0.379456 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055457Jy sigma=1.189947 ! Fit after self-cal, rms=0.055453Jy sigma=1.189895 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055453Jy sigma=1.189895 ! Fit after self-cal, rms=0.055455Jy sigma=1.189740 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.01 mas, bmaj=3.095 mas, bpa=0.001976 degrees ! Estimated noise=0.333052 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000976218 Jy ! Component: 100 - total flux cleaned = -0.00137972 Jy ! Component: 150 - total flux cleaned = -0.00169214 Jy ! Component: 200 - total flux cleaned = -0.00186391 Jy ! Total flux subtracted in 200 components = -0.00186391 Jy ! Clean residual min=-0.001322 max=0.001671 Jy/beam ! Clean residual mean=0.000000 rms=0.000380 Jy/beam ! Combined flux in latest and established models = 0.377592 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 156 components and 0.377592 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055440Jy sigma=1.189453 ! Fit after self-cal, rms=0.055436Jy sigma=1.189390 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.6, 13.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000906165 Jy ! Component: 100 - total flux cleaned = 0.00110678 Jy ! Component: 150 - total flux cleaned = 0.00114101 Jy ! Component: 200 - total flux cleaned = 0.00123311 Jy ! Total flux subtracted in 200 components = 0.00123311 Jy ! Clean residual min=-0.001311 max=0.001328 Jy/beam ! Clean residual mean=-0.000000 rms=0.000347 Jy/beam ! Combined flux in latest and established models = 0.378825 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 180 components and 0.378825 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055389Jy sigma=1.188381 ! Fit after self-cal, rms=0.055386Jy sigma=1.188335 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8242 mas, bmaj=1.92 mas, bpa=-1.198 degrees ! Estimated noise=0.243781 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8242 x 1.92 at -1.198 degrees (North through East) ! Clean map min=-0.0034677 max=0.18092 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6677 mas, bmaj=1.679 mas, bpa=-2.255 degrees ! Estimated noise=0.359326 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.144568 Jy ! Component: 100 - total flux cleaned = 0.220972 Jy ! Component: 150 - total flux cleaned = 0.264825 Jy ! Component: 200 - total flux cleaned = 0.293166 Jy ! Total flux subtracted in 200 components = 0.293166 Jy ! Clean residual min=-0.005543 max=0.015599 Jy/beam ! Clean residual mean=-0.000008 rms=0.001590 Jy/beam ! Combined flux in latest and established models = 0.293166 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.293166 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8242 mas, bmaj=1.92 mas, bpa=-1.198 degrees ! Estimated noise=0.243781 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0305685 Jy ! Component: 100 - total flux cleaned = 0.0481012 Jy ! Component: 150 - total flux cleaned = 0.0586777 Jy ! Component: 200 - total flux cleaned = 0.0657357 Jy ! Total flux subtracted in 200 components = 0.0657357 Jy ! Clean residual min=-0.002661 max=0.003852 Jy/beam ! Clean residual mean=-0.000003 rms=0.000649 Jy/beam ! Combined flux in latest and established models = 0.358902 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 30 components and 0.358902 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00502876 Jy ! Component: 100 - total flux cleaned = 0.00891237 Jy ! Component: 150 - total flux cleaned = 0.0107129 Jy ! Component: 200 - total flux cleaned = 0.0122857 Jy ! Total flux subtracted in 200 components = 0.0122857 Jy ! Clean residual min=-0.002039 max=0.002272 Jy/beam ! Clean residual mean=-0.000001 rms=0.000460 Jy/beam ! Combined flux in latest and established models = 0.371187 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 62 components and 0.371187 Jy ! Inverting map ! Added new window around map position (-2, -4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00162907 Jy ! Component: 100 - total flux cleaned = 0.00278985 Jy ! Component: 150 - total flux cleaned = 0.0033523 Jy ! Component: 200 - total flux cleaned = 0.00393828 Jy ! Total flux subtracted in 200 components = 0.00393828 Jy ! Clean residual min=-0.001713 max=0.001861 Jy/beam ! Clean residual mean=-0.000001 rms=0.000399 Jy/beam ! Combined flux in latest and established models = 0.375126 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 86 components and 0.375126 Jy ! Inverting map ! Added new window around map position (5.2, -12.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000987176 Jy ! Component: 100 - total flux cleaned = 0.00142814 Jy ! Component: 150 - total flux cleaned = 0.00195379 Jy ! Component: 200 - total flux cleaned = 0.00234066 Jy ! Total flux subtracted in 200 components = 0.00234066 Jy ! Clean residual min=-0.001557 max=0.001597 Jy/beam ! Clean residual mean=-0.000001 rms=0.000367 Jy/beam ! Combined flux in latest and established models = 0.377466 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 110 components and 0.377466 Jy ! Inverting map ! Added new window around map position (-6.2, 34.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00114415 Jy ! Component: 100 - total flux cleaned = 0.00165235 Jy ! Component: 150 - total flux cleaned = 0.00198699 Jy ! Component: 200 - total flux cleaned = 0.00226139 Jy ! Total flux subtracted in 200 components = 0.00226139 Jy ! Clean residual min=-0.001517 max=0.001468 Jy/beam ! Clean residual mean=-0.000000 rms=0.000347 Jy/beam ! Combined flux in latest and established models = 0.379728 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 129 components and 0.379728 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.01 mas, bmaj=3.095 mas, bpa=0.001976 degrees ! Estimated noise=0.333052 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00122145 Jy ! Component: 100 - total flux cleaned = 0.00176435 Jy ! Component: 150 - total flux cleaned = 0.00183139 Jy ! Component: 200 - total flux cleaned = 0.00183003 Jy ! Total flux subtracted in 200 components = 0.00183003 Jy ! Clean residual min=-0.001428 max=0.001213 Jy/beam ! Clean residual mean=-0.000001 rms=0.000347 Jy/beam ! Combined flux in latest and established models = 0.381558 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.63501e-05 Jy ! Component: 100 - total flux cleaned = 0.000103565 Jy ! Component: 150 - total flux cleaned = 0.000201106 Jy ! Component: 200 - total flux cleaned = 0.000270739 Jy ! Total flux subtracted in 200 components = 0.000270739 Jy ! Clean residual min=-0.001392 max=0.001187 Jy/beam ! Clean residual mean=-0.000001 rms=0.000336 Jy/beam ! Combined flux in latest and established models = 0.381829 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 172 components and 0.381829 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8242 mas, bmaj=1.92 mas, bpa=-1.198 degrees ! Estimated noise=0.243781 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000502095 Jy ! Component: 100 - total flux cleaned = -0.000666333 Jy ! Component: 150 - total flux cleaned = -0.000667198 Jy ! Component: 200 - total flux cleaned = -0.000666836 Jy ! Total flux subtracted in 200 components = -0.000666836 Jy ! Clean residual min=-0.001385 max=0.001340 Jy/beam ! Clean residual mean=-0.000000 rms=0.000319 Jy/beam ! Combined flux in latest and established models = 0.381162 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 190 components and 0.381162 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055292Jy sigma=1.186413 ! Fit after self-cal, rms=0.055258Jy sigma=1.185645 wmodel J0301+0602_X_map.mod ! Writing 190 model components to file: J0301+0602_X_map.mod wobs J0301+0602_X_uvs.fits ! Writing UV FITS file: J0301+0602_X_uvs.fits wwins J0301+0602_X_map.win ! wwins: Wrote 11 windows to J0301+0602_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000360332 Jy ! Component: 100 - total flux cleaned = -0.000614913 Jy ! Component: 150 - total flux cleaned = -0.00076953 Jy ! Component: 200 - total flux cleaned = -0.000855221 Jy ! Component: 250 - total flux cleaned = -0.000854845 Jy ! Component: 300 - total flux cleaned = -0.000793365 Jy ! Component: 350 - total flux cleaned = -0.000753342 Jy ! Component: 400 - total flux cleaned = -0.00075308 Jy ! Component: 450 - total flux cleaned = -0.000734209 Jy ! Component: 500 - total flux cleaned = -0.000810187 Jy ! Component: 550 - total flux cleaned = -0.000828621 Jy ! Component: 600 - total flux cleaned = -0.00081033 Jy ! Component: 650 - total flux cleaned = -0.000846405 Jy ! Component: 700 - total flux cleaned = -0.000792684 Jy ! Component: 750 - total flux cleaned = -0.000810445 Jy ! Component: 800 - total flux cleaned = -0.000810707 Jy ! Component: 850 - total flux cleaned = -0.000879611 Jy ! Component: 900 - total flux cleaned = -0.000896412 Jy ! Component: 950 - total flux cleaned = -0.000879499 Jy ! Component: 1000 - total flux cleaned = -0.000979089 Jy ! Component: 1050 - total flux cleaned = -0.000962596 Jy ! Component: 1100 - total flux cleaned = -0.000995311 Jy ! Component: 1150 - total flux cleaned = -0.00105986 Jy ! Component: 1200 - total flux cleaned = -0.0011078 Jy ! Component: 1250 - total flux cleaned = -0.0011395 Jy ! Component: 1300 - total flux cleaned = -0.00124931 Jy ! Component: 1350 - total flux cleaned = -0.00121829 Jy ! Component: 1400 - total flux cleaned = -0.00135671 Jy ! Component: 1450 - total flux cleaned = -0.00144796 Jy ! Component: 1500 - total flux cleaned = -0.0014778 Jy ! Component: 1550 - total flux cleaned = -0.00152276 Jy ! Component: 1600 - total flux cleaned = -0.00150793 Jy ! Component: 1650 - total flux cleaned = -0.0015963 Jy ! Component: 1700 - total flux cleaned = -0.00158183 Jy ! Component: 1750 - total flux cleaned = -0.00163976 Jy ! Component: 1800 - total flux cleaned = -0.00169715 Jy ! Component: 1850 - total flux cleaned = -0.00171114 Jy ! Component: 1900 - total flux cleaned = -0.00175361 Jy ! Component: 1950 - total flux cleaned = -0.00183771 Jy ! Component: 2000 - total flux cleaned = -0.00186546 Jy ! Component: 2050 - total flux cleaned = -0.0019206 Jy ! Component: 2100 - total flux cleaned = -0.00187953 Jy ! Component: 2150 - total flux cleaned = -0.00192027 Jy ! Component: 2200 - total flux cleaned = -0.00196093 Jy ! Component: 2250 - total flux cleaned = -0.00194745 Jy ! Component: 2300 - total flux cleaned = -0.00198723 Jy ! Component: 2350 - total flux cleaned = -0.00201373 Jy ! Component: 2400 - total flux cleaned = -0.00197442 Jy ! Component: 2450 - total flux cleaned = -0.00203957 Jy ! Component: 2500 - total flux cleaned = -0.00202639 Jy ! Component: 2550 - total flux cleaned = -0.00206506 Jy ! Component: 2600 - total flux cleaned = -0.0020778 Jy ! Component: 2650 - total flux cleaned = -0.00214122 Jy ! Component: 2700 - total flux cleaned = -0.00220432 Jy ! Component: 2750 - total flux cleaned = -0.00222939 Jy ! Component: 2800 - total flux cleaned = -0.00224181 Jy ! Component: 2850 - total flux cleaned = -0.00225417 Jy ! Component: 2900 - total flux cleaned = -0.00232782 Jy ! Component: 2950 - total flux cleaned = -0.00232778 Jy ! Component: 3000 - total flux cleaned = -0.00233996 Jy ! Component: 3050 - total flux cleaned = -0.00237607 Jy ! Component: 3100 - total flux cleaned = -0.00236404 Jy ! Component: 3150 - total flux cleaned = -0.00239983 Jy ! Component: 3200 - total flux cleaned = -0.00243537 Jy ! Component: 3250 - total flux cleaned = -0.00240001 Jy ! Component: 3300 - total flux cleaned = -0.00241176 Jy ! Component: 3350 - total flux cleaned = -0.00241174 Jy ! Component: 3400 - total flux cleaned = -0.00242341 Jy ! Component: 3450 - total flux cleaned = -0.00243499 Jy ! Component: 3500 - total flux cleaned = -0.00241211 Jy ! Component: 3550 - total flux cleaned = -0.00245746 Jy ! Component: 3600 - total flux cleaned = -0.00241224 Jy ! Component: 3650 - total flux cleaned = -0.00245742 Jy ! Component: 3700 - total flux cleaned = -0.00242371 Jy ! Component: 3750 - total flux cleaned = -0.00250175 Jy ! Component: 3800 - total flux cleaned = -0.00249064 Jy ! Component: 3850 - total flux cleaned = -0.00249059 Jy ! Component: 3900 - total flux cleaned = -0.00251256 Jy ! Component: 3950 - total flux cleaned = -0.00249092 Jy ! Component: 4000 - total flux cleaned = -0.00254508 Jy ! Component: 4050 - total flux cleaned = -0.00256672 Jy ! Total flux subtracted in 4096 components = -0.00257746 Jy ! Clean residual min=-0.000672 max=0.000581 Jy/beam ! Clean residual mean=-0.000000 rms=0.000188 Jy/beam ! Combined flux in latest and established models = 0.378584 Jy keep ! Adding 336 model components to the UV plane model. ! The established model now contains 526 components and 0.378584 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J0301+0602_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8242 x 1.92 at -1.198 degrees (North through East) ! Clean map min=-0.0027348 max=0.18061 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J0301+0602_X_map.fits wmodel /vlbi/uf001/uva//J0301+0602_X_map.mod ! Writing 526 model components to file: /vlbi/uf001/uva//J0301+0602_X_map.mod wobs /vlbi/uf001/uva//J0301+0602_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J0301+0602_X_uvs.fits wwins /vlbi/uf001/uva//J0301+0602_X_map.win ! wwins: Wrote 12 windows to /vlbi/uf001/uva//J0301+0602_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.180608 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000187367 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.311228 0.311228 0.622455 1.24491 2.48982 4.97964 9.95929 19.9186 39.8371 79.6743 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.18 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 963.924 quit ! Quitting program ! Log file /vlbi/uf001/uva//J0301+0602_X_dfm.log closed on Sun Jan 13 21:38:25 2019