! Started logfile: /vlbi/uf001/uva//J0245-4459_S_dfm.log on Sun Jan 13 21:31:30 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /vlbi/uf001/uva//J0245-4459_S_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J0245-4459_S_uva.fits ! AN table 1: 58 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.756773 visibilities/baseline/integration-bin. ! Found source: J0245-4459 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 3687 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0245-4459_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.021572Jy sigma=11.856521 ! Fit after self-cal, rms=0.785366Jy sigma=9.045338 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.483 mas, bmaj=8.319 mas, bpa=-9.479 degrees ! Estimated noise=1.50547 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.179787 Jy ! Component: 100 - total flux cleaned = 0.220464 Jy ! Total flux subtracted in 100 components = 0.220464 Jy ! Clean residual min=-0.018529 max=0.025750 Jy/beam ! Clean residual mean=0.000175 rms=0.005311 Jy/beam ! Combined flux in latest and established models = 0.220464 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.220464 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.113558Jy sigma=1.235414 ! Fit after self-cal, rms=0.113511Jy sigma=1.235076 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.97 mas, bmaj=9.854 mas, bpa=-8.897 degrees ! Estimated noise=1.03128 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0107391 Jy ! Component: 100 - total flux cleaned = 0.0113668 Jy ! Component: 150 - total flux cleaned = 0.0118843 Jy ! Component: 200 - total flux cleaned = 0.0123112 Jy ! Total flux subtracted in 200 components = 0.0123112 Jy ! Clean residual min=-0.013691 max=0.020367 Jy/beam ! Clean residual mean=0.000449 rms=0.004405 Jy/beam ! Combined flux in latest and established models = 0.232775 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 14 components and 0.232775 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.112373Jy sigma=1.209557 ! Fit after self-cal, rms=0.112364Jy sigma=1.209321 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.97 x 9.854 at -8.897 degrees (North through East) ! Clean map min=-0.013472 max=0.21893 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.89 KP 0.90 LA 0.93 MK 0.95 ! NL 1.75 OV 0.94 PT 1.38 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 0.89 KP 0.90 LA 0.96 MK 0.96 ! NL 1.82 OV 0.95 PT 1.17 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 0.93 KP 0.92 LA 0.90 MK 0.97 ! NL 1.62 OV 0.92 PT 1.21 SC 1.02 ! ! ! Fit before self-cal, rms=0.112364Jy sigma=1.209321 ! Fit after self-cal, rms=0.128040Jy sigma=1.094704 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.956 mas, bmaj=9.884 mas, bpa=-8.974 degrees ! Estimated noise=1.02289 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00103431 Jy ! Component: 100 - total flux cleaned = 0.000888091 Jy ! Component: 150 - total flux cleaned = 0.000721201 Jy ! Component: 200 - total flux cleaned = 0.000612757 Jy ! Total flux subtracted in 200 components = 0.000612757 Jy ! Clean residual min=-0.006146 max=0.006180 Jy/beam ! Clean residual mean=0.000165 rms=0.001588 Jy/beam ! Combined flux in latest and established models = 0.233388 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 24 components and 0.233388 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.128008Jy sigma=1.094114 ! Fit after self-cal, rms=0.128868Jy sigma=1.092660 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.128868Jy sigma=1.092660 ! Fit after self-cal, rms=0.131022Jy sigma=1.087681 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.949 mas, bmaj=9.874 mas, bpa=-8.985 degrees ! Estimated noise=1.02394 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00091293 Jy ! Component: 100 - total flux cleaned = 0.00087722 Jy ! Component: 150 - total flux cleaned = 0.000846419 Jy ! Component: 200 - total flux cleaned = 0.000819242 Jy ! Total flux subtracted in 200 components = 0.000819242 Jy ! Clean residual min=-0.005295 max=0.006313 Jy/beam ! Clean residual mean=0.000144 rms=0.001387 Jy/beam ! Combined flux in latest and established models = 0.234207 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 33 components and 0.234207 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.131008Jy sigma=1.087337 ! Fit after self-cal, rms=0.131050Jy sigma=1.087275 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (74, 23.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00495007 Jy ! Component: 100 - total flux cleaned = 0.00525905 Jy ! Component: 150 - total flux cleaned = 0.00537467 Jy ! Component: 200 - total flux cleaned = 0.00557702 Jy ! Total flux subtracted in 200 components = 0.00557702 Jy ! Clean residual min=-0.004592 max=0.004746 Jy/beam ! Clean residual mean=0.000115 rms=0.001244 Jy/beam ! Combined flux in latest and established models = 0.239784 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 59 components and 0.239784 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.130839Jy sigma=1.084381 ! Fit after self-cal, rms=0.130809Jy sigma=1.084164 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.130809Jy sigma=1.084164 ! Fit after self-cal, rms=0.133338Jy sigma=1.082073 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.945 mas, bmaj=9.873 mas, bpa=-8.915 degrees ! Estimated noise=1.02112 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00152106 Jy ! Component: 100 - total flux cleaned = 0.00175872 Jy ! Component: 150 - total flux cleaned = 0.00180428 Jy ! Component: 200 - total flux cleaned = 0.00180597 Jy ! Total flux subtracted in 200 components = 0.00180597 Jy ! Clean residual min=-0.004353 max=0.004410 Jy/beam ! Clean residual mean=0.000097 rms=0.001113 Jy/beam ! Combined flux in latest and established models = 0.24159 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 77 components and 0.24159 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.133286Jy sigma=1.081533 ! Fit after self-cal, rms=0.133326Jy sigma=1.081483 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000221338 Jy ! Component: 100 - total flux cleaned = 0.000184567 Jy ! Component: 150 - total flux cleaned = 0.000184863 Jy ! Component: 200 - total flux cleaned = 0.00015186 Jy ! Total flux subtracted in 200 components = 0.00015186 Jy ! Clean residual min=-0.004399 max=0.004342 Jy/beam ! Clean residual mean=0.000097 rms=0.001101 Jy/beam ! Combined flux in latest and established models = 0.241742 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 84 components and 0.241742 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.133304Jy sigma=1.081232 ! Fit after self-cal, rms=0.133299Jy sigma=1.081225 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.133299Jy sigma=1.081225 ! Fit after self-cal, rms=0.133797Jy sigma=1.081170 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.282 mas, bmaj=31.83 mas, bpa=-1.84 degrees ! Estimated noise=1.36562 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000489781 Jy ! Component: 100 - total flux cleaned = 0.000488375 Jy ! Component: 150 - total flux cleaned = 0.000552493 Jy ! Component: 200 - total flux cleaned = 0.000634626 Jy ! Total flux subtracted in 200 components = 0.000634626 Jy ! Clean residual min=-0.004207 max=0.005998 Jy/beam ! Clean residual mean=0.000198 rms=0.001626 Jy/beam ! Combined flux in latest and established models = 0.242377 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 91 components and 0.242377 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.133806Jy sigma=1.081213 ! Fit after self-cal, rms=0.133798Jy sigma=1.081021 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.06235e-06 Jy ! Component: 100 - total flux cleaned = -7.00458e-06 Jy ! Component: 150 - total flux cleaned = 4.40498e-05 Jy ! Component: 200 - total flux cleaned = 1.92514e-05 Jy ! Total flux subtracted in 200 components = 1.92514e-05 Jy ! Clean residual min=-0.004221 max=0.006021 Jy/beam ! Clean residual mean=0.000198 rms=0.001624 Jy/beam ! Combined flux in latest and established models = 0.242396 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 102 components and 0.242396 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.133810Jy sigma=1.081150 ! Fit after self-cal, rms=0.133797Jy sigma=1.080979 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=2.944 mas, bmaj=9.872 mas, bpa=-8.885 degrees ! Estimated noise=1.02124 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.944 x 9.872 at -8.885 degrees (North through East) ! Clean map min=-0.0038057 max=0.21595 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.464 mas, bmaj=8.364 mas, bpa=-9.535 degrees ! Estimated noise=1.4811 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.176645 Jy ! Component: 100 - total flux cleaned = 0.217346 Jy ! Component: 150 - total flux cleaned = 0.231444 Jy ! Component: 200 - total flux cleaned = 0.235792 Jy ! Total flux subtracted in 200 components = 0.235792 Jy ! Clean residual min=-0.006705 max=0.007419 Jy/beam ! Clean residual mean=0.000053 rms=0.001860 Jy/beam ! Combined flux in latest and established models = 0.235792 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.235792 Jy ! Inverting map and beam ! Estimated beam: bmin=2.944 mas, bmaj=9.872 mas, bpa=-8.885 degrees ! Estimated noise=1.02124 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5, 9.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00590675 Jy ! Component: 100 - total flux cleaned = 0.00713493 Jy ! Component: 150 - total flux cleaned = 0.0081651 Jy ! Component: 200 - total flux cleaned = 0.00875928 Jy ! Total flux subtracted in 200 components = 0.00875928 Jy ! Clean residual min=-0.003844 max=0.004478 Jy/beam ! Clean residual mean=0.000104 rms=0.001083 Jy/beam ! Combined flux in latest and established models = 0.244551 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 36 components and 0.244551 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.282 mas, bmaj=31.83 mas, bpa=-1.84 degrees ! Estimated noise=1.36562 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000432314 Jy ! Component: 100 - total flux cleaned = 0.000548396 Jy ! Component: 150 - total flux cleaned = 0.000616865 Jy ! Component: 200 - total flux cleaned = 0.000708734 Jy ! Total flux subtracted in 200 components = 0.000708734 Jy ! Clean residual min=-0.003984 max=0.006172 Jy/beam ! Clean residual mean=0.000208 rms=0.001591 Jy/beam ! Combined flux in latest and established models = 0.24526 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00010628 Jy ! Component: 100 - total flux cleaned = 0.000152052 Jy ! Component: 150 - total flux cleaned = 0.00017438 Jy ! Component: 200 - total flux cleaned = 0.00019473 Jy ! Total flux subtracted in 200 components = 0.00019473 Jy ! Clean residual min=-0.004037 max=0.006142 Jy/beam ! Clean residual mean=0.000206 rms=0.001581 Jy/beam ! Combined flux in latest and established models = 0.245455 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 54 components and 0.245455 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.944 mas, bmaj=9.872 mas, bpa=-8.885 degrees ! Estimated noise=1.02124 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000399532 Jy ! Component: 100 - total flux cleaned = 0.000472533 Jy ! Component: 150 - total flux cleaned = 0.00053171 Jy ! Component: 200 - total flux cleaned = 0.000583223 Jy ! Total flux subtracted in 200 components = 0.000583223 Jy ! Clean residual min=-0.003604 max=0.004382 Jy/beam ! Clean residual mean=0.000103 rms=0.001029 Jy/beam ! Combined flux in latest and established models = 0.246038 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 73 components and 0.246038 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.133738Jy sigma=1.080154 ! Fit after self-cal, rms=0.133738Jy sigma=1.079883 wmodel J0245-4459_S_map.mod ! Writing 73 model components to file: J0245-4459_S_map.mod wobs J0245-4459_S_uvs.fits ! Writing UV FITS file: J0245-4459_S_uvs.fits wwins J0245-4459_S_map.win ! wwins: Wrote 3 windows to J0245-4459_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00140742 Jy ! Component: 100 - total flux cleaned = 0.00216582 Jy ! Component: 150 - total flux cleaned = 0.00262184 Jy ! Component: 200 - total flux cleaned = 0.00299297 Jy ! Component: 250 - total flux cleaned = 0.00348966 Jy ! Component: 300 - total flux cleaned = 0.00381961 Jy ! Component: 350 - total flux cleaned = 0.00418053 Jy ! Component: 400 - total flux cleaned = 0.00439576 Jy ! Component: 450 - total flux cleaned = 0.00460254 Jy ! Component: 500 - total flux cleaned = 0.00480331 Jy ! Component: 550 - total flux cleaned = 0.00488106 Jy ! Component: 600 - total flux cleaned = 0.00499454 Jy ! Component: 650 - total flux cleaned = 0.00514099 Jy ! Component: 700 - total flux cleaned = 0.00524752 Jy ! Component: 750 - total flux cleaned = 0.00542134 Jy ! Component: 800 - total flux cleaned = 0.00559039 Jy ! Component: 850 - total flux cleaned = 0.00562379 Jy ! Component: 900 - total flux cleaned = 0.00581898 Jy ! Component: 950 - total flux cleaned = 0.00597704 Jy ! Component: 1000 - total flux cleaned = 0.00619281 Jy ! Component: 1050 - total flux cleaned = 0.00634332 Jy ! Component: 1100 - total flux cleaned = 0.00657982 Jy ! Component: 1150 - total flux cleaned = 0.00666584 Jy ! Component: 1200 - total flux cleaned = 0.00680775 Jy ! Component: 1250 - total flux cleaned = 0.00700151 Jy ! Component: 1300 - total flux cleaned = 0.00713744 Jy ! Component: 1350 - total flux cleaned = 0.00735073 Jy ! Component: 1400 - total flux cleaned = 0.0075859 Jy ! Component: 1450 - total flux cleaned = 0.00771392 Jy ! Component: 1500 - total flux cleaned = 0.00786506 Jy ! Component: 1550 - total flux cleaned = 0.0079889 Jy ! Component: 1600 - total flux cleaned = 0.00808594 Jy ! Component: 1650 - total flux cleaned = 0.00815756 Jy ! Component: 1700 - total flux cleaned = 0.00818079 Jy ! Component: 1750 - total flux cleaned = 0.00818087 Jy ! Component: 1800 - total flux cleaned = 0.00824943 Jy ! Component: 1850 - total flux cleaned = 0.00833942 Jy ! Component: 1900 - total flux cleaned = 0.00831721 Jy ! Component: 1950 - total flux cleaned = 0.00831736 Jy ! Component: 2000 - total flux cleaned = 0.00836047 Jy ! Component: 2050 - total flux cleaned = 0.00823244 Jy ! Component: 2100 - total flux cleaned = 0.00819053 Jy ! Component: 2150 - total flux cleaned = 0.00810734 Jy ! Component: 2200 - total flux cleaned = 0.00806624 Jy ! Component: 2250 - total flux cleaned = 0.00800509 Jy ! Component: 2300 - total flux cleaned = 0.00794486 Jy ! Component: 2350 - total flux cleaned = 0.00790516 Jy ! Component: 2400 - total flux cleaned = 0.00782643 Jy ! Component: 2450 - total flux cleaned = 0.00786563 Jy ! Component: 2500 - total flux cleaned = 0.00778804 Jy ! Component: 2550 - total flux cleaned = 0.00773058 Jy ! Component: 2600 - total flux cleaned = 0.00769275 Jy ! Component: 2650 - total flux cleaned = 0.0076929 Jy ! Component: 2700 - total flux cleaned = 0.00769292 Jy ! Component: 2750 - total flux cleaned = 0.00767432 Jy ! Component: 2800 - total flux cleaned = 0.00771126 Jy ! Component: 2850 - total flux cleaned = 0.00769265 Jy ! Component: 2900 - total flux cleaned = 0.00767439 Jy ! Component: 2950 - total flux cleaned = 0.00761987 Jy ! Component: 3000 - total flux cleaned = 0.00758375 Jy ! Component: 3050 - total flux cleaned = 0.00751156 Jy ! Component: 3100 - total flux cleaned = 0.00749359 Jy ! Component: 3150 - total flux cleaned = 0.00747569 Jy ! Component: 3200 - total flux cleaned = 0.00738625 Jy ! Component: 3250 - total flux cleaned = 0.00738626 Jy ! Component: 3300 - total flux cleaned = 0.00733286 Jy ! Component: 3350 - total flux cleaned = 0.0072618 Jy ! Component: 3400 - total flux cleaned = 0.00726175 Jy ! Component: 3450 - total flux cleaned = 0.00717317 Jy ! Component: 3500 - total flux cleaned = 0.00715544 Jy ! Component: 3550 - total flux cleaned = 0.00713786 Jy ! Component: 3600 - total flux cleaned = 0.00708481 Jy ! Component: 3650 - total flux cleaned = 0.00703193 Jy ! Component: 3700 - total flux cleaned = 0.0069791 Jy ! Component: 3750 - total flux cleaned = 0.00696142 Jy ! Component: 3800 - total flux cleaned = 0.0069261 Jy ! Component: 3850 - total flux cleaned = 0.00690836 Jy ! Component: 3900 - total flux cleaned = 0.00685544 Jy ! Component: 3950 - total flux cleaned = 0.00682012 Jy ! Component: 4000 - total flux cleaned = 0.00674936 Jy ! Component: 4050 - total flux cleaned = 0.00673172 Jy ! Total flux subtracted in 4096 components = 0.006714 Jy ! Clean residual min=-0.001018 max=0.001053 Jy/beam ! Clean residual mean=0.000021 rms=0.000328 Jy/beam ! Combined flux in latest and established models = 0.252752 Jy keep ! Adding 242 model components to the UV plane model. ! The established model now contains 315 components and 0.252752 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J0245-4459_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.944 x 9.872 at -8.885 degrees (North through East) ! Clean map min=-0.0019234 max=0.21803 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J0245-4459_S_map.fits wmodel /vlbi/uf001/uva//J0245-4459_S_map.mod ! Writing 315 model components to file: /vlbi/uf001/uva//J0245-4459_S_map.mod wobs /vlbi/uf001/uva//J0245-4459_S_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J0245-4459_S_uvs.fits wwins /vlbi/uf001/uva//J0245-4459_S_map.win ! wwins: Wrote 4 windows to /vlbi/uf001/uva//J0245-4459_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.218033 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00032462 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.446657 0.446657 0.893313 1.78663 3.57325 7.1465 14.293 28.586 57.172 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.218 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 671.657 quit ! Quitting program ! Log file /vlbi/uf001/uva//J0245-4459_S_dfm.log closed on Sun Jan 13 21:31:34 2019