! Started logfile: /vlbi/uf001/uva//J0228+4212_S_dfm.log on Sun Jan 13 21:25:56 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J0228+4212_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0228+4212_S_uva.fits
! AN table 1: 57 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.91501 visibilities/baseline/integration-bin.
! Found source: J0228+4212
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 7041 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0228+4212_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.022558Jy  sigma=23.863720
! Fit after  self-cal, rms=0.798424Jy  sigma=18.736972
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.026 mas, bmaj=5.055 mas, bpa=-6.208 degrees
! Estimated noise=0.579018 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.151472 Jy
! Component: 100  -  total flux cleaned = 0.192115 Jy
! Total flux subtracted in 100 components = 0.192115 Jy
! Clean residual min=-0.008135 max=0.020065 Jy/beam
! Clean residual mean=0.000020 rms=0.002242 Jy/beam
! Combined flux in latest and established models = 0.192115 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.192115 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082676Jy  sigma=1.635182
! Fit after  self-cal, rms=0.082647Jy  sigma=1.634689
! Inverting map 
! Added new window around map position (-7, -3).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0218142 Jy
! Component: 100  -  total flux cleaned = 0.0358101 Jy
! Total flux subtracted in 100 components = 0.0358101 Jy
! Clean residual min=-0.006995 max=0.007542 Jy/beam
! Clean residual mean=0.000011 rms=0.001533 Jy/beam
! Combined flux in latest and established models = 0.227925 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 18 components and 0.227925 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074840Jy  sigma=1.438495
! Fit after  self-cal, rms=0.074633Jy  sigma=1.433006
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0102385 Jy
! Component: 100  -  total flux cleaned = 0.0170813 Jy
! Total flux subtracted in 100 components = 0.0170813 Jy
! Clean residual min=-0.006264 max=0.005707 Jy/beam
! Clean residual mean=0.000007 rms=0.001307 Jy/beam
! Combined flux in latest and established models = 0.245006 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 27 components and 0.245006 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072658Jy  sigma=1.385734
! Fit after  self-cal, rms=0.072601Jy  sigma=1.384379
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.5 mas, bmaj=5.803 mas, bpa=-2.414 degrees
! Estimated noise=0.384801 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-14, -11).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00782025 Jy
! Component: 100  -  total flux cleaned = 0.012929 Jy
! Component: 150  -  total flux cleaned = 0.0167279 Jy
! Component: 200  -  total flux cleaned = 0.0196508 Jy
! Total flux subtracted in 200 components = 0.0196508 Jy
! Clean residual min=-0.004956 max=0.005173 Jy/beam
! Clean residual mean=-0.000006 rms=0.001061 Jy/beam
! Combined flux in latest and established models = 0.264657 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 60 components and 0.264657 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071400Jy  sigma=1.356501
! Fit after  self-cal, rms=0.071295Jy  sigma=1.354035
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.5 x 5.803 at -2.414 degrees (North through East)
! Clean map  min=-0.0046983  max=0.19893 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.96     HN        0.98     KP        1.00     
!   LA        0.95     MK        1.03     NL        1.02     OV        1.01     
!   PT        0.97     SC        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        0.99     HN        0.98     KP        1.02     
!   LA        0.96     MK        1.03     NL        1.09     OV        1.05     
!   PT        0.96     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        0.97     HN        0.99     KP        1.00     
!   LA        0.95     MK        1.03     NL        1.06     OV        0.99     
!   PT        0.96     SC        1.03     
! 
! 
! Fit before self-cal, rms=0.071295Jy  sigma=1.354035
! Fit after  self-cal, rms=0.068482Jy  sigma=1.326009
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.528 mas, bmaj=5.842 mas, bpa=-2.465 degrees
! Estimated noise=0.385658 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000234806 Jy
! Component: 100  -  total flux cleaned = 4.00475e-05 Jy
! Component: 150  -  total flux cleaned = 0.000122659 Jy
! Component: 200  -  total flux cleaned = -3.1801e-06 Jy
! Total flux subtracted in 200 components = -3.1801e-06 Jy
! Clean residual min=-0.004153 max=0.003703 Jy/beam
! Clean residual mean=-0.000009 rms=0.000871 Jy/beam
! Combined flux in latest and established models = 0.264654 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 78 components and 0.264654 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068221Jy  sigma=1.321792
! Fit after  self-cal, rms=0.068218Jy  sigma=1.321457
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068218Jy  sigma=1.321457
! Fit after  self-cal, rms=0.062371Jy  sigma=1.265070
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.515 mas, bmaj=5.842 mas, bpa=-2.04 degrees
! Estimated noise=0.384312 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.7983e-06 Jy
! Component: 100  -  total flux cleaned = -6.2805e-05 Jy
! Component: 150  -  total flux cleaned = -5.96057e-05 Jy
! Component: 200  -  total flux cleaned = -1.53351e-05 Jy
! Total flux subtracted in 200 components = -1.53351e-05 Jy
! Clean residual min=-0.002087 max=0.002395 Jy/beam
! Clean residual mean=0.000006 rms=0.000517 Jy/beam
! Combined flux in latest and established models = 0.264638 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 101 components and 0.264638 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062281Jy  sigma=1.262991
! Fit after  self-cal, rms=0.062288Jy  sigma=1.262765
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (21.5, -24).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00136526 Jy
! Component: 100  -  total flux cleaned = 0.00205805 Jy
! Component: 150  -  total flux cleaned = 0.00223701 Jy
! Component: 200  -  total flux cleaned = 0.00231278 Jy
! Total flux subtracted in 200 components = 0.00231278 Jy
! Clean residual min=-0.001926 max=0.001955 Jy/beam
! Clean residual mean=0.000005 rms=0.000489 Jy/beam
! Combined flux in latest and established models = 0.266951 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 120 components and 0.266951 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062181Jy  sigma=1.260405
! Fit after  self-cal, rms=0.062175Jy  sigma=1.260265
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062175Jy  sigma=1.260265
! Fit after  self-cal, rms=0.062171Jy  sigma=1.259921
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.51 mas, bmaj=5.84 mas, bpa=-1.882 degrees
! Estimated noise=0.384222 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00065668 Jy
! Component: 100  -  total flux cleaned = 0.000773224 Jy
! Component: 150  -  total flux cleaned = 0.000845184 Jy
! Component: 200  -  total flux cleaned = 0.000944966 Jy
! Total flux subtracted in 200 components = 0.000944966 Jy
! Clean residual min=-0.001815 max=0.002048 Jy/beam
! Clean residual mean=0.000006 rms=0.000468 Jy/beam
! Combined flux in latest and established models = 0.267896 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 132 components and 0.267896 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062126Jy  sigma=1.258883
! Fit after  self-cal, rms=0.062124Jy  sigma=1.258848
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (55, 31.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00112302 Jy
! Component: 100  -  total flux cleaned = 0.0012083 Jy
! Component: 150  -  total flux cleaned = 0.00153723 Jy
! Component: 200  -  total flux cleaned = 0.00190387 Jy
! Total flux subtracted in 200 components = 0.00190387 Jy
! Clean residual min=-0.001846 max=0.001688 Jy/beam
! Clean residual mean=0.000006 rms=0.000439 Jy/beam
! Combined flux in latest and established models = 0.2698 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 151 components and 0.2698 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062058Jy  sigma=1.257032
! Fit after  self-cal, rms=0.062055Jy  sigma=1.256975
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062055Jy  sigma=1.256975
! Fit after  self-cal, rms=0.062115Jy  sigma=1.256813
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.333 mas, bmaj=9.171 mas, bpa=1.773 degrees
! Estimated noise=0.484647 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00114398 Jy
! Component: 100  -  total flux cleaned = 0.00158117 Jy
! Component: 150  -  total flux cleaned = 0.00177837 Jy
! Component: 200  -  total flux cleaned = 0.00202457 Jy
! Total flux subtracted in 200 components = 0.00202457 Jy
! Clean residual min=-0.001979 max=0.001728 Jy/beam
! Clean residual mean=0.000013 rms=0.000529 Jy/beam
! Combined flux in latest and established models = 0.271824 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 183 components and 0.271824 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062106Jy  sigma=1.256557
! Fit after  self-cal, rms=0.062104Jy  sigma=1.256525
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000298173 Jy
! Component: 100  -  total flux cleaned = 0.000425946 Jy
! Component: 150  -  total flux cleaned = 0.000523245 Jy
! Component: 200  -  total flux cleaned = 0.000577567 Jy
! Total flux subtracted in 200 components = 0.000577567 Jy
! Clean residual min=-0.001968 max=0.001665 Jy/beam
! Clean residual mean=0.000013 rms=0.000517 Jy/beam
! Combined flux in latest and established models = 0.272402 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 202 components and 0.272402 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062099Jy  sigma=1.256419
! Fit after  self-cal, rms=0.062098Jy  sigma=1.256411
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.506 mas, bmaj=5.84 mas, bpa=-1.762 degrees
! Estimated noise=0.384385 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.506 x 5.84 at -1.762 degrees (North through East)
! Clean map  min=-0.0017456  max=0.19873 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.034 mas, bmaj=5.097 mas, bpa=-5.655 degrees
! Estimated noise=0.580148 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.151531 Jy
! Component: 100  -  total flux cleaned = 0.19228 Jy
! Component: 150  -  total flux cleaned = 0.21426 Jy
! Component: 200  -  total flux cleaned = 0.228358 Jy
! Total flux subtracted in 200 components = 0.228358 Jy
! Clean residual min=-0.004661 max=0.007728 Jy/beam
! Clean residual mean=0.000014 rms=0.001207 Jy/beam
! Combined flux in latest and established models = 0.228358 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.228358 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.506 mas, bmaj=5.84 mas, bpa=-1.762 degrees
! Estimated noise=0.384385 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0115633 Jy
! Component: 100  -  total flux cleaned = 0.0192292 Jy
! Component: 150  -  total flux cleaned = 0.0245748 Jy
! Component: 200  -  total flux cleaned = 0.0285647 Jy
! Total flux subtracted in 200 components = 0.0285647 Jy
! Clean residual min=-0.002487 max=0.002337 Jy/beam
! Clean residual mean=0.000008 rms=0.000600 Jy/beam
! Combined flux in latest and established models = 0.256923 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 42 components and 0.256923 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.333 mas, bmaj=9.171 mas, bpa=1.773 degrees
! Estimated noise=0.484647 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00415003 Jy
! Component: 100  -  total flux cleaned = 0.00698279 Jy
! Component: 150  -  total flux cleaned = 0.00900509 Jy
! Component: 200  -  total flux cleaned = 0.0103565 Jy
! Total flux subtracted in 200 components = 0.0103565 Jy
! Clean residual min=-0.002329 max=0.002145 Jy/beam
! Clean residual mean=0.000014 rms=0.000590 Jy/beam
! Combined flux in latest and established models = 0.267279 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00113923 Jy
! Component: 100  -  total flux cleaned = 0.00206268 Jy
! Component: 150  -  total flux cleaned = 0.00272338 Jy
! Component: 200  -  total flux cleaned = 0.00318969 Jy
! Total flux subtracted in 200 components = 0.00318969 Jy
! Clean residual min=-0.002138 max=0.001846 Jy/beam
! Clean residual mean=0.000013 rms=0.000543 Jy/beam
! Combined flux in latest and established models = 0.270469 Jy
! Adding 78 model components to the UV plane model.
! The established model now contains 117 components and 0.270469 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.506 mas, bmaj=5.84 mas, bpa=-1.762 degrees
! Estimated noise=0.384385 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000344421 Jy
! Component: 100  -  total flux cleaned = 0.00105524 Jy
! Component: 150  -  total flux cleaned = 0.00156443 Jy
! Component: 200  -  total flux cleaned = 0.00182126 Jy
! Total flux subtracted in 200 components = 0.00182126 Jy
! Clean residual min=-0.002089 max=0.001806 Jy/beam
! Clean residual mean=0.000006 rms=0.000460 Jy/beam
! Combined flux in latest and established models = 0.27229 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 142 components and 0.27229 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062239Jy  sigma=1.260288
! Fit after  self-cal, rms=0.062237Jy  sigma=1.260165
wmodel J0228+4212_S_map.mod
! Writing 142 model components to file: J0228+4212_S_map.mod
wobs   J0228+4212_S_uvs.fits
! Writing UV FITS file: J0228+4212_S_uvs.fits
wwins  J0228+4212_S_map.win
! wwins: Wrote 5 windows to J0228+4212_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000688142 Jy
! Component: 100  -  total flux cleaned = -0.00114619 Jy
! Component: 150  -  total flux cleaned = -0.00148668 Jy
! Component: 200  -  total flux cleaned = -0.00160732 Jy
! Component: 250  -  total flux cleaned = -0.00175201 Jy
! Component: 300  -  total flux cleaned = -0.00172433 Jy
! Component: 350  -  total flux cleaned = -0.00180675 Jy
! Component: 400  -  total flux cleaned = -0.00188677 Jy
! Component: 450  -  total flux cleaned = -0.00199142 Jy
! Component: 500  -  total flux cleaned = -0.00214525 Jy
! Component: 550  -  total flux cleaned = -0.00227096 Jy
! Component: 600  -  total flux cleaned = -0.0024189 Jy
! Component: 650  -  total flux cleaned = -0.00251582 Jy
! Component: 700  -  total flux cleaned = -0.00256365 Jy
! Component: 750  -  total flux cleaned = -0.00268044 Jy
! Component: 800  -  total flux cleaned = -0.00272621 Jy
! Component: 850  -  total flux cleaned = -0.00274873 Jy
! Component: 900  -  total flux cleaned = -0.00274841 Jy
! Component: 950  -  total flux cleaned = -0.00279193 Jy
! Component: 1000  -  total flux cleaned = -0.0027705 Jy
! Component: 1050  -  total flux cleaned = -0.00274944 Jy
! Component: 1100  -  total flux cleaned = -0.00277101 Jy
! Component: 1150  -  total flux cleaned = -0.00275047 Jy
! Component: 1200  -  total flux cleaned = -0.0027299 Jy
! Component: 1250  -  total flux cleaned = -0.00270943 Jy
! Component: 1300  -  total flux cleaned = -0.00262895 Jy
! Component: 1350  -  total flux cleaned = -0.00258919 Jy
! Component: 1400  -  total flux cleaned = -0.00260899 Jy
! Component: 1450  -  total flux cleaned = -0.00253091 Jy
! Component: 1500  -  total flux cleaned = -0.00247335 Jy
! Component: 1550  -  total flux cleaned = -0.00249264 Jy
! Component: 1600  -  total flux cleaned = -0.00239867 Jy
! Component: 1650  -  total flux cleaned = -0.00239885 Jy
! Component: 1700  -  total flux cleaned = -0.00232532 Jy
! Component: 1750  -  total flux cleaned = -0.00228918 Jy
! Component: 1800  -  total flux cleaned = -0.00223501 Jy
! Component: 1850  -  total flux cleaned = -0.00223505 Jy
! Component: 1900  -  total flux cleaned = -0.00223477 Jy
! Component: 1950  -  total flux cleaned = -0.0021821 Jy
! Component: 2000  -  total flux cleaned = -0.00218212 Jy
! Component: 2050  -  total flux cleaned = -0.00214782 Jy
! Component: 2100  -  total flux cleaned = -0.00214775 Jy
! Component: 2150  -  total flux cleaned = -0.00213085 Jy
! Component: 2200  -  total flux cleaned = -0.00216398 Jy
! Component: 2250  -  total flux cleaned = -0.0020476 Jy
! Component: 2300  -  total flux cleaned = -0.00206409 Jy
! Component: 2350  -  total flux cleaned = -0.00204761 Jy
! Component: 2400  -  total flux cleaned = -0.00203141 Jy
! Component: 2450  -  total flux cleaned = -0.00207959 Jy
! Component: 2500  -  total flux cleaned = -0.00204762 Jy
! Component: 2550  -  total flux cleaned = -0.00207894 Jy
! Component: 2600  -  total flux cleaned = -0.00209446 Jy
! Component: 2650  -  total flux cleaned = -0.00207874 Jy
! Component: 2700  -  total flux cleaned = -0.002017 Jy
! Component: 2750  -  total flux cleaned = -0.00209355 Jy
! Component: 2800  -  total flux cleaned = -0.00207808 Jy
! Component: 2850  -  total flux cleaned = -0.00206308 Jy
! Component: 2900  -  total flux cleaned = -0.00201813 Jy
! Component: 2950  -  total flux cleaned = -0.00198845 Jy
! Component: 3000  -  total flux cleaned = -0.00195893 Jy
! Component: 3050  -  total flux cleaned = -0.00198832 Jy
! Component: 3100  -  total flux cleaned = -0.00197379 Jy
! Component: 3150  -  total flux cleaned = -0.00200262 Jy
! Component: 3200  -  total flux cleaned = -0.00205995 Jy
! Component: 3250  -  total flux cleaned = -0.00207406 Jy
! Component: 3300  -  total flux cleaned = -0.00207406 Jy
! Component: 3350  -  total flux cleaned = -0.00204589 Jy
! Component: 3400  -  total flux cleaned = -0.00207372 Jy
! Component: 3450  -  total flux cleaned = -0.00201808 Jy
! Component: 3500  -  total flux cleaned = -0.00199056 Jy
! Component: 3550  -  total flux cleaned = -0.00201803 Jy
! Component: 3600  -  total flux cleaned = -0.00201804 Jy
! Component: 3650  -  total flux cleaned = -0.00197736 Jy
! Component: 3700  -  total flux cleaned = -0.00200456 Jy
! Component: 3750  -  total flux cleaned = -0.00204489 Jy
! Component: 3800  -  total flux cleaned = -0.00197833 Jy
! Component: 3850  -  total flux cleaned = -0.00201814 Jy
! Component: 3900  -  total flux cleaned = -0.00203128 Jy
! Component: 3950  -  total flux cleaned = -0.00200512 Jy
! Component: 4000  -  total flux cleaned = -0.00204419 Jy
! Component: 4050  -  total flux cleaned = -0.00205716 Jy
! Total flux subtracted in 4096 components = -0.0020443 Jy
! Clean residual min=-0.000857 max=0.000805 Jy/beam
! Clean residual mean=0.000002 rms=0.000232 Jy/beam
! Combined flux in latest and established models = 0.270246 Jy
keep
! Adding 302 model components to the UV plane model.
! The established model now contains 444 components and 0.270246 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0228+4212_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.506 x 5.84 at -1.762 degrees (North through East)
! Clean map  min=-0.0013692  max=0.19875 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0228+4212_S_map.fits
wmodel /vlbi/uf001/uva//J0228+4212_S_map.mod
! Writing 444 model components to file: /vlbi/uf001/uva//J0228+4212_S_map.mod
wobs   /vlbi/uf001/uva//J0228+4212_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0228+4212_S_uvs.fits
wwins  /vlbi/uf001/uva//J0228+4212_S_map.win
! wwins: Wrote 6 windows to /vlbi/uf001/uva//J0228+4212_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.198753 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000229412 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.346277 0.346277 0.692554 1.38511 2.77022 5.54043 11.0809 22.1617 44.3235 88.6469
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.198 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  866.358 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0228+4212_S_dfm.log closed on Sun Jan 13 21:26:01 2019