! Started logfile: /vlbi/uf001/uva//J0220-2151_S_dfm.log on Sun Jan 13 21:24:02 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J0220-2151_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0220-2151_S_uva.fits
! AN table 1: 38 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.839599 visibilities/baseline/integration-bin.
! Found source: J0220-2151
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 2010 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0220-2151_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.015254Jy  sigma=19.814895
! Fit after  self-cal, rms=0.877901Jy  sigma=16.994450
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.684 mas, bmaj=31.14 mas, bpa=-8.605 degrees
! Estimated noise=0.972674 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0967259 Jy
! Component: 100  -  total flux cleaned = 0.118175 Jy
! Total flux subtracted in 100 components = 0.118175 Jy
! Clean residual min=-0.006407 max=0.008716 Jy/beam
! Clean residual mean=-0.000017 rms=0.001961 Jy/beam
! Combined flux in latest and established models = 0.118175 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.118175 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068312Jy  sigma=1.281357
! Fit after  self-cal, rms=0.068290Jy  sigma=1.280702
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.301 mas, bmaj=32.36 mas, bpa=-8.427 degrees
! Estimated noise=0.833794 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00834196 Jy
! Component: 100  -  total flux cleaned = 0.0123597 Jy
! Component: 150  -  total flux cleaned = 0.0137908 Jy
! Component: 200  -  total flux cleaned = 0.0147164 Jy
! Total flux subtracted in 200 components = 0.0147164 Jy
! Clean residual min=-0.004126 max=0.004629 Jy/beam
! Clean residual mean=-0.000004 rms=0.001279 Jy/beam
! Combined flux in latest and established models = 0.132891 Jy
! Performing phase self-cal
! Adding 58 model components to the UV plane model.
! The established model now contains 67 components and 0.132891 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067326Jy  sigma=1.259936
! Fit after  self-cal, rms=0.067314Jy  sigma=1.259320
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.301 x 32.36 at -8.427 degrees (North through East)
! Clean map  min=-0.0041923  max=0.12479 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     HN        1.04     KP        1.03     LA        0.93     
!   NL        1.04     OV        0.97     PT        1.04     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.96     HN        1.04     KP        1.05     LA        0.97     
!   NL        0.99     OV        0.97     PT        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     HN        1.02     KP        1.03     LA        0.91     
!   NL        0.99     OV        0.98     PT        1.00     
! 
! 
! Fit before self-cal, rms=0.067314Jy  sigma=1.259320
! Fit after  self-cal, rms=0.067150Jy  sigma=1.253557
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.35 mas, bmaj=32.38 mas, bpa=-8.378 degrees
! Estimated noise=0.827853 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00101547 Jy
! Component: 100  -  total flux cleaned = -0.000929098 Jy
! Component: 150  -  total flux cleaned = -0.000863668 Jy
! Component: 200  -  total flux cleaned = -0.000862844 Jy
! Total flux subtracted in 200 components = -0.000862844 Jy
! Clean residual min=-0.003551 max=0.004260 Jy/beam
! Clean residual mean=0.000001 rms=0.001082 Jy/beam
! Combined flux in latest and established models = 0.132028 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 96 components and 0.132028 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067090Jy  sigma=1.252717
! Fit after  self-cal, rms=0.067124Jy  sigma=1.252456
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067124Jy  sigma=1.252456
! Fit after  self-cal, rms=0.067467Jy  sigma=1.251865
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.366 mas, bmaj=32.42 mas, bpa=-8.398 degrees
! Estimated noise=0.829933 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000625949 Jy
! Component: 100  -  total flux cleaned = -0.000655366 Jy
! Component: 150  -  total flux cleaned = -0.00071055 Jy
! Component: 200  -  total flux cleaned = -0.000734435 Jy
! Total flux subtracted in 200 components = -0.000734435 Jy
! Clean residual min=-0.003578 max=0.004108 Jy/beam
! Clean residual mean=0.000001 rms=0.001053 Jy/beam
! Combined flux in latest and established models = 0.131294 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 121 components and 0.131294 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067438Jy  sigma=1.251264
! Fit after  self-cal, rms=0.067439Jy  sigma=1.251198
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.93471e-05 Jy
! Component: 100  -  total flux cleaned = -8.34928e-05 Jy
! Component: 150  -  total flux cleaned = -0.000127517 Jy
! Component: 200  -  total flux cleaned = -0.000190841 Jy
! Total flux subtracted in 200 components = -0.000190841 Jy
! Clean residual min=-0.003547 max=0.004024 Jy/beam
! Clean residual mean=0.000001 rms=0.001040 Jy/beam
! Combined flux in latest and established models = 0.131103 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 135 components and 0.131103 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067424Jy  sigma=1.250855
! Fit after  self-cal, rms=0.067421Jy  sigma=1.250826
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067421Jy  sigma=1.250826
! Fit after  self-cal, rms=0.067857Jy  sigma=1.248048
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.377 mas, bmaj=32.46 mas, bpa=-8.468 degrees
! Estimated noise=0.831194 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000297971 Jy
! Component: 100  -  total flux cleaned = -0.000619969 Jy
! Component: 150  -  total flux cleaned = -0.000822253 Jy
! Component: 200  -  total flux cleaned = -0.000998262 Jy
! Total flux subtracted in 200 components = -0.000998262 Jy
! Clean residual min=-0.003420 max=0.003460 Jy/beam
! Clean residual mean=-0.000003 rms=0.000985 Jy/beam
! Combined flux in latest and established models = 0.130105 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 145 components and 0.130105 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067832Jy  sigma=1.247448
! Fit after  self-cal, rms=0.067848Jy  sigma=1.247333
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000125692 Jy
! Component: 100  -  total flux cleaned = -0.000187531 Jy
! Component: 150  -  total flux cleaned = -0.000242804 Jy
! Component: 200  -  total flux cleaned = -0.000258815 Jy
! Total flux subtracted in 200 components = -0.000258815 Jy
! Clean residual min=-0.003369 max=0.003398 Jy/beam
! Clean residual mean=-0.000003 rms=0.000975 Jy/beam
! Combined flux in latest and established models = 0.129846 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 156 components and 0.129846 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067839Jy  sigma=1.247076
! Fit after  self-cal, rms=0.067835Jy  sigma=1.247060
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067835Jy  sigma=1.247060
! Fit after  self-cal, rms=0.068055Jy  sigma=1.246941
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.694 mas, bmaj=32.91 mas, bpa=-8.427 degrees
! Estimated noise=0.882965 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000161002 Jy
! Component: 100  -  total flux cleaned = -3.50281e-05 Jy
! Component: 150  -  total flux cleaned = -8.5393e-05 Jy
! Component: 200  -  total flux cleaned = -8.52726e-05 Jy
! Total flux subtracted in 200 components = -8.52726e-05 Jy
! Clean residual min=-0.003313 max=0.003706 Jy/beam
! Clean residual mean=-0.000006 rms=0.000938 Jy/beam
! Combined flux in latest and established models = 0.129761 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 181 components and 0.129761 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068055Jy  sigma=1.246717
! Fit after  self-cal, rms=0.068057Jy  sigma=1.246661
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.90419e-05 Jy
! Component: 100  -  total flux cleaned = 7.82263e-05 Jy
! Component: 150  -  total flux cleaned = 7.7869e-05 Jy
! Component: 200  -  total flux cleaned = 7.73722e-05 Jy
! Total flux subtracted in 200 components = 7.73722e-05 Jy
! Clean residual min=-0.003220 max=0.003651 Jy/beam
! Clean residual mean=-0.000006 rms=0.000921 Jy/beam
! Combined flux in latest and established models = 0.129838 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 187 components and 0.129838 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068058Jy  sigma=1.246566
! Fit after  self-cal, rms=0.068056Jy  sigma=1.246542
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=5.387 mas, bmaj=32.48 mas, bpa=-8.504 degrees
! Estimated noise=0.832088 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.387 x 32.48 at -8.504 degrees (North through East)
! Clean map  min=-0.0031617  max=0.12428 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.754 mas, bmaj=31.28 mas, bpa=-8.72 degrees
! Estimated noise=0.974893 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0967802 Jy
! Component: 100  -  total flux cleaned = 0.118085 Jy
! Component: 150  -  total flux cleaned = 0.125064 Jy
! Component: 200  -  total flux cleaned = 0.127901 Jy
! Total flux subtracted in 200 components = 0.127901 Jy
! Clean residual min=-0.004521 max=0.005090 Jy/beam
! Clean residual mean=-0.000005 rms=0.001383 Jy/beam
! Combined flux in latest and established models = 0.127901 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.127901 Jy
! Inverting map and beam 
! Estimated beam: bmin=5.387 mas, bmaj=32.48 mas, bpa=-8.504 degrees
! Estimated noise=0.832088 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00289746 Jy
! Component: 100  -  total flux cleaned = 0.00321645 Jy
! Component: 150  -  total flux cleaned = 0.00327936 Jy
! Component: 200  -  total flux cleaned = 0.00308623 Jy
! Total flux subtracted in 200 components = 0.00308623 Jy
! Clean residual min=-0.003457 max=0.003231 Jy/beam
! Clean residual mean=-0.000002 rms=0.001014 Jy/beam
! Combined flux in latest and established models = 0.130987 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 60 components and 0.130987 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.694 mas, bmaj=32.91 mas, bpa=-8.427 degrees
! Estimated noise=0.882965 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000274812 Jy
! Component: 100  -  total flux cleaned = 0.000437918 Jy
! Component: 150  -  total flux cleaned = 0.00032414 Jy
! Component: 200  -  total flux cleaned = 0.000168089 Jy
! Total flux subtracted in 200 components = 0.000168089 Jy
! Clean residual min=-0.003427 max=0.003609 Jy/beam
! Clean residual mean=-0.000003 rms=0.000938 Jy/beam
! Combined flux in latest and established models = 0.131155 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000139441 Jy
! Component: 100  -  total flux cleaned = -0.000244421 Jy
! Component: 150  -  total flux cleaned = -0.000341152 Jy
! Component: 200  -  total flux cleaned = -0.000430049 Jy
! Total flux subtracted in 200 components = -0.000430049 Jy
! Clean residual min=-0.003319 max=0.003580 Jy/beam
! Clean residual mean=-0.000004 rms=0.000925 Jy/beam
! Combined flux in latest and established models = 0.130725 Jy
! Adding 58 model components to the UV plane model.
! The established model now contains 111 components and 0.130725 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=5.387 mas, bmaj=32.48 mas, bpa=-8.504 degrees
! Estimated noise=0.832088 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000124208 Jy
! Component: 100  -  total flux cleaned = -0.000240898 Jy
! Component: 150  -  total flux cleaned = -0.000373222 Jy
! Component: 200  -  total flux cleaned = -0.000494806 Jy
! Total flux subtracted in 200 components = -0.000494806 Jy
! Clean residual min=-0.003266 max=0.003280 Jy/beam
! Clean residual mean=-0.000004 rms=0.000965 Jy/beam
! Combined flux in latest and established models = 0.13023 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 130 components and 0.13023 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068076Jy  sigma=1.247033
! Fit after  self-cal, rms=0.068073Jy  sigma=1.247002
wmodel J0220-2151_S_map.mod
! Writing 130 model components to file: J0220-2151_S_map.mod
wobs   J0220-2151_S_uvs.fits
! Writing UV FITS file: J0220-2151_S_uvs.fits
wwins  J0220-2151_S_map.win
! wwins: Wrote 1 windows to J0220-2151_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000236213 Jy
! Component: 100  -  total flux cleaned = -0.000348495 Jy
! Component: 150  -  total flux cleaned = -0.000149233 Jy
! Component: 200  -  total flux cleaned = -5.68065e-05 Jy
! Component: 250  -  total flux cleaned = 0.000161611 Jy
! Component: 300  -  total flux cleaned = 0.000202793 Jy
! Component: 350  -  total flux cleaned = 0.000282851 Jy
! Component: 400  -  total flux cleaned = 0.000358116 Jy
! Component: 450  -  total flux cleaned = 0.000466513 Jy
! Component: 500  -  total flux cleaned = 0.000535839 Jy
! Component: 550  -  total flux cleaned = 0.000603234 Jy
! Component: 600  -  total flux cleaned = 0.000700436 Jy
! Component: 650  -  total flux cleaned = 0.000857452 Jy
! Component: 700  -  total flux cleaned = 0.00104095 Jy
! Component: 750  -  total flux cleaned = 0.00124856 Jy
! Component: 800  -  total flux cleaned = 0.00139286 Jy
! Component: 850  -  total flux cleaned = 0.00153299 Jy
! Component: 900  -  total flux cleaned = 0.00174999 Jy
! Component: 950  -  total flux cleaned = 0.00193377 Jy
! Component: 1000  -  total flux cleaned = 0.00211299 Jy
! Component: 1050  -  total flux cleaned = 0.00221312 Jy
! Component: 1100  -  total flux cleaned = 0.00233585 Jy
! Component: 1150  -  total flux cleaned = 0.00235987 Jy
! Component: 1200  -  total flux cleaned = 0.00238297 Jy
! Component: 1250  -  total flux cleaned = 0.00238245 Jy
! Component: 1300  -  total flux cleaned = 0.00238226 Jy
! Component: 1350  -  total flux cleaned = 0.0023823 Jy
! Component: 1400  -  total flux cleaned = 0.00240402 Jy
! Component: 1450  -  total flux cleaned = 0.00242513 Jy
! Component: 1500  -  total flux cleaned = 0.00248851 Jy
! Component: 1550  -  total flux cleaned = 0.0025093 Jy
! Component: 1600  -  total flux cleaned = 0.00261164 Jy
! Component: 1650  -  total flux cleaned = 0.00269218 Jy
! Component: 1700  -  total flux cleaned = 0.00277193 Jy
! Component: 1750  -  total flux cleaned = 0.00283141 Jy
! Component: 1800  -  total flux cleaned = 0.00298752 Jy
! Component: 1850  -  total flux cleaned = 0.00302605 Jy
! Component: 1900  -  total flux cleaned = 0.00308339 Jy
! Component: 1950  -  total flux cleaned = 0.0031589 Jy
! Component: 2000  -  total flux cleaned = 0.00317756 Jy
! Component: 2050  -  total flux cleaned = 0.00323307 Jy
! Component: 2100  -  total flux cleaned = 0.0033066 Jy
! Component: 2150  -  total flux cleaned = 0.00334306 Jy
! Component: 2200  -  total flux cleaned = 0.00341511 Jy
! Component: 2250  -  total flux cleaned = 0.00345086 Jy
! Component: 2300  -  total flux cleaned = 0.00353924 Jy
! Component: 2350  -  total flux cleaned = 0.00357426 Jy
! Component: 2400  -  total flux cleaned = 0.00362639 Jy
! Component: 2450  -  total flux cleaned = 0.00366074 Jy
! Component: 2500  -  total flux cleaned = 0.00366084 Jy
! Component: 2550  -  total flux cleaned = 0.00367788 Jy
! Component: 2600  -  total flux cleaned = 0.00366104 Jy
! Component: 2650  -  total flux cleaned = 0.00362748 Jy
! Component: 2700  -  total flux cleaned = 0.00362753 Jy
! Component: 2750  -  total flux cleaned = 0.00364416 Jy
! Component: 2800  -  total flux cleaned = 0.00362752 Jy
! Component: 2850  -  total flux cleaned = 0.00357786 Jy
! Component: 2900  -  total flux cleaned = 0.00362731 Jy
! Component: 2950  -  total flux cleaned = 0.00359443 Jy
! Component: 3000  -  total flux cleaned = 0.00362714 Jy
! Component: 3050  -  total flux cleaned = 0.00361085 Jy
! Component: 3100  -  total flux cleaned = 0.00362713 Jy
! Component: 3150  -  total flux cleaned = 0.00364333 Jy
! Component: 3200  -  total flux cleaned = 0.00362719 Jy
! Component: 3250  -  total flux cleaned = 0.00362723 Jy
! Component: 3300  -  total flux cleaned = 0.00367558 Jy
! Component: 3350  -  total flux cleaned = 0.0036755 Jy
! Component: 3400  -  total flux cleaned = 0.00361111 Jy
! Component: 3450  -  total flux cleaned = 0.00362716 Jy
! Component: 3500  -  total flux cleaned = 0.00364317 Jy
! Component: 3550  -  total flux cleaned = 0.00356288 Jy
! Component: 3600  -  total flux cleaned = 0.00361109 Jy
! Component: 3650  -  total flux cleaned = 0.00361103 Jy
! Component: 3700  -  total flux cleaned = 0.00362711 Jy
! Component: 3750  -  total flux cleaned = 0.00361111 Jy
! Component: 3800  -  total flux cleaned = 0.00362724 Jy
! Component: 3850  -  total flux cleaned = 0.00362722 Jy
! Component: 3900  -  total flux cleaned = 0.00364324 Jy
! Component: 3950  -  total flux cleaned = 0.00361104 Jy
! Component: 4000  -  total flux cleaned = 0.00362716 Jy
! Component: 4050  -  total flux cleaned = 0.00359503 Jy
! Total flux subtracted in 4096 components = 0.00361125 Jy
! Clean residual min=-0.000887 max=0.000976 Jy/beam
! Clean residual mean=0.000003 rms=0.000320 Jy/beam
! Combined flux in latest and established models = 0.133841 Jy
keep
! Adding 347 model components to the UV plane model.
! The established model now contains 477 components and 0.133841 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0220-2151_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.387 x 32.48 at -8.504 degrees (North through East)
! Clean map  min=-0.0034289  max=0.12394 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0220-2151_S_map.fits
wmodel /vlbi/uf001/uva//J0220-2151_S_map.mod
! Writing 477 model components to file: /vlbi/uf001/uva//J0220-2151_S_map.mod
wobs   /vlbi/uf001/uva//J0220-2151_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0220-2151_S_uvs.fits
wwins  /vlbi/uf001/uva//J0220-2151_S_map.win
! wwins: Wrote 2 windows to /vlbi/uf001/uva//J0220-2151_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.123939 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000322679 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.78106 0.78106 1.56212 3.12424 6.24848 12.497 24.9939 49.9878 99.9757
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.123 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  384.093 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0220-2151_S_dfm.log closed on Sun Jan 13 21:24:07 2019