! Started logfile: /vlbi/uf001/uva//J0219-1842_X_dfm.log on Sun Jan 13 21:23:09 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /vlbi/uf001/uva//J0219-1842_X_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0219-1842_X_uva.fits
! AN table 1: 38 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.970175 visibilities/baseline/integration-bin.
! Found source: J0219-1842
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 19908 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0219-1842_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.040695Jy  sigma=23.326530
! Fit after  self-cal, rms=0.745906Jy  sigma=16.637278
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6383 mas, bmaj=1.608 mas, bpa=-2.633 degrees
! Estimated noise=0.448006 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.195507 Jy
! Component: 100  -  total flux cleaned = 0.24716 Jy
! Total flux subtracted in 100 components = 0.24716 Jy
! Clean residual min=-0.008726 max=0.020571 Jy/beam
! Clean residual mean=-0.000014 rms=0.002081 Jy/beam
! Combined flux in latest and established models = 0.24716 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.24716 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073730Jy  sigma=1.558401
! Fit after  self-cal, rms=0.073715Jy  sigma=1.558051
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0206299 Jy
! Component: 100  -  total flux cleaned = 0.0289859 Jy
! Total flux subtracted in 100 components = 0.0289859 Jy
! Clean residual min=-0.005850 max=0.010130 Jy/beam
! Clean residual mean=-0.000007 rms=0.001499 Jy/beam
! Combined flux in latest and established models = 0.276146 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 6 components and 0.276146 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069179Jy  sigma=1.414844
! Fit after  self-cal, rms=0.069173Jy  sigma=1.414646
! Inverting map 
! Added new window around map position (-1.8, -0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00580081 Jy
! Component: 100  -  total flux cleaned = 0.0064391 Jy
! Total flux subtracted in 100 components = 0.0064391 Jy
! Clean residual min=-0.005716 max=0.009298 Jy/beam
! Clean residual mean=-0.000005 rms=0.001378 Jy/beam
! Combined flux in latest and established models = 0.282585 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 12 components and 0.282585 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068170Jy  sigma=1.391529
! Fit after  self-cal, rms=0.068084Jy  sigma=1.388492
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8267 mas, bmaj=1.998 mas, bpa=-2.597 degrees
! Estimated noise=0.230033 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1.6, -5.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00881971 Jy
! Component: 100  -  total flux cleaned = 0.0132926 Jy
! Component: 150  -  total flux cleaned = 0.0146681 Jy
! Component: 200  -  total flux cleaned = 0.0151773 Jy
! Total flux subtracted in 200 components = 0.0151773 Jy
! Clean residual min=-0.007206 max=0.007707 Jy/beam
! Clean residual mean=-0.000000 rms=0.001493 Jy/beam
! Combined flux in latest and established models = 0.297762 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 32 components and 0.297762 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066901Jy  sigma=1.359120
! Fit after  self-cal, rms=0.066760Jy  sigma=1.354805
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8267 x 1.998 at -2.597 degrees (North through East)
! Clean map  min=-0.0066704  max=0.25284 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.01     HN        1.08     KP        1.01     
!   LA        0.97     MK        1.01     NL        1.06     OV        0.91     
!   PT        0.97     SC        0.95     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        1.01     HN        1.03     KP        0.98     
!   LA        0.98     MK        1.00     NL        1.08     OV        0.91     
!   PT        0.95     SC        0.97     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.02     HN        1.07     KP        0.99     
!   LA        0.98     MK        1.00     NL        1.06     OV        0.91     
!   PT        0.95     SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.00     HN        1.03     KP        0.99     
!   LA        0.98     MK        1.02     NL        1.07     OV        0.91     
!   PT        0.97     SC        0.95     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        1.00     HN        1.04     KP        0.97     
!   LA        0.97     MK        1.01     NL        1.08     OV        0.92     
!   PT        0.96     SC        0.97     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        1.01     HN        1.05     KP        0.99     
!   LA        0.98     MK        1.00     NL        1.07     OV        0.92     
!   PT        0.98     SC        0.98     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.02     HN        1.05     KP        0.99     
!   LA        0.97     MK        1.00     NL        1.08     OV        0.92     
!   PT        0.98     SC        0.98     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        1.02     HN        1.08     KP        1.02     
!   LA        0.98     MK        1.00     NL        1.07     OV        0.91     
!   PT        0.97     SC        0.98     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        1.01     HN        1.08     KP        0.99     
!   LA        0.97     MK        1.00     NL        1.09     OV        0.90     
!   PT        0.95     SC        1.00     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        1.00     HN        1.06     KP        1.01     
!   LA        0.98     MK        1.02     NL        1.07     OV        0.91     
!   PT        0.99     SC        0.98     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        1.01     HN        1.10     KP        0.99     
!   LA        0.97     MK        1.02     NL        1.11     OV        0.91     
!   PT        0.97     SC        0.97     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        1.01     HN        1.07     KP        0.99     
!   LA        0.97     MK        1.01     NL        1.11     OV        0.92     
!   PT        0.98     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.066760Jy  sigma=1.354805
! Fit after  self-cal, rms=0.065574Jy  sigma=1.283485
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8272 mas, bmaj=2.001 mas, bpa=-2.151 degrees
! Estimated noise=0.231354 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00325641 Jy
! Component: 100  -  total flux cleaned = -0.00515808 Jy
! Component: 150  -  total flux cleaned = -0.00588697 Jy
! Component: 200  -  total flux cleaned = -0.00627049 Jy
! Total flux subtracted in 200 components = -0.00627049 Jy
! Clean residual min=-0.003119 max=0.003944 Jy/beam
! Clean residual mean=0.000002 rms=0.000804 Jy/beam
! Combined flux in latest and established models = 0.291492 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 49 components and 0.291492 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065361Jy  sigma=1.279332
! Fit after  self-cal, rms=0.065395Jy  sigma=1.278872
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065395Jy  sigma=1.278872
! Fit after  self-cal, rms=0.066259Jy  sigma=1.261673
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8274 mas, bmaj=2.002 mas, bpa=-2.112 degrees
! Estimated noise=0.231171 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00270031 Jy
! Component: 100  -  total flux cleaned = -0.00364733 Jy
! Component: 150  -  total flux cleaned = -0.0036473 Jy
! Component: 200  -  total flux cleaned = -0.00360953 Jy
! Total flux subtracted in 200 components = -0.00360953 Jy
! Clean residual min=-0.002503 max=0.002762 Jy/beam
! Clean residual mean=-0.000003 rms=0.000529 Jy/beam
! Combined flux in latest and established models = 0.287882 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 63 components and 0.287882 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066116Jy  sigma=1.258946
! Fit after  self-cal, rms=0.066111Jy  sigma=1.258531
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.2, -2.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00278695 Jy
! Component: 100  -  total flux cleaned = 0.00333119 Jy
! Component: 150  -  total flux cleaned = 0.0034275 Jy
! Component: 200  -  total flux cleaned = 0.00342941 Jy
! Total flux subtracted in 200 components = 0.00342941 Jy
! Clean residual min=-0.002045 max=0.001876 Jy/beam
! Clean residual mean=-0.000002 rms=0.000451 Jy/beam
! Combined flux in latest and established models = 0.291311 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 86 components and 0.291311 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065952Jy  sigma=1.255415
! Fit after  self-cal, rms=0.065921Jy  sigma=1.254814
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065921Jy  sigma=1.254814
! Fit after  self-cal, rms=0.066019Jy  sigma=1.253985
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8267 mas, bmaj=2 mas, bpa=-2.061 degrees
! Estimated noise=0.231117 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000414317 Jy
! Component: 100  -  total flux cleaned = -0.000621649 Jy
! Component: 150  -  total flux cleaned = -0.000511282 Jy
! Component: 200  -  total flux cleaned = -0.000449034 Jy
! Total flux subtracted in 200 components = -0.000449034 Jy
! Clean residual min=-0.001716 max=0.001557 Jy/beam
! Clean residual mean=-0.000002 rms=0.000389 Jy/beam
! Combined flux in latest and established models = 0.290862 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 93 components and 0.290862 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065935Jy  sigma=1.252500
! Fit after  self-cal, rms=0.065921Jy  sigma=1.252176
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.95936e-06 Jy
! Component: 100  -  total flux cleaned = 6.36406e-05 Jy
! Component: 150  -  total flux cleaned = 8.86971e-05 Jy
! Component: 200  -  total flux cleaned = 0.000187197 Jy
! Total flux subtracted in 200 components = 0.000187197 Jy
! Clean residual min=-0.001659 max=0.001530 Jy/beam
! Clean residual mean=-0.000002 rms=0.000372 Jy/beam
! Combined flux in latest and established models = 0.29105 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 103 components and 0.291049 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065887Jy  sigma=1.251605
! Fit after  self-cal, rms=0.065880Jy  sigma=1.251489
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065880Jy  sigma=1.251489
! Fit after  self-cal, rms=0.065864Jy  sigma=1.251118
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.2 mas, bmaj=4.53 mas, bpa=4.353 degrees
! Estimated noise=0.296059 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000371064 Jy
! Component: 100  -  total flux cleaned = 0.000528174 Jy
! Component: 150  -  total flux cleaned = 0.000684255 Jy
! Component: 200  -  total flux cleaned = 0.000789657 Jy
! Total flux subtracted in 200 components = 0.000789657 Jy
! Clean residual min=-0.001685 max=0.001694 Jy/beam
! Clean residual mean=-0.000004 rms=0.000479 Jy/beam
! Combined flux in latest and established models = 0.291839 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 118 components and 0.291839 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065839Jy  sigma=1.250803
! Fit after  self-cal, rms=0.065836Jy  sigma=1.250720
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.90959e-05 Jy
! Component: 100  -  total flux cleaned = -4.51702e-05 Jy
! Component: 150  -  total flux cleaned = 5.09988e-05 Jy
! Component: 200  -  total flux cleaned = 9.38414e-05 Jy
! Total flux subtracted in 200 components = 9.38414e-05 Jy
! Clean residual min=-0.001593 max=0.001660 Jy/beam
! Clean residual mean=-0.000004 rms=0.000468 Jy/beam
! Combined flux in latest and established models = 0.291933 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 132 components and 0.291933 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065825Jy  sigma=1.250573
! Fit after  self-cal, rms=0.065822Jy  sigma=1.250536
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.826 mas, bmaj=1.998 mas, bpa=-2.046 degrees
! Estimated noise=0.230916 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.826 x 1.998 at -2.046 degrees (North through East)
! Clean map  min=-0.0015381  max=0.25462 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6378 mas, bmaj=1.609 mas, bpa=-2.002 degrees
! Estimated noise=0.449504 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.196082 Jy
! Component: 100  -  total flux cleaned = 0.246621 Jy
! Component: 150  -  total flux cleaned = 0.266462 Jy
! Component: 200  -  total flux cleaned = 0.274509 Jy
! Total flux subtracted in 200 components = 0.274509 Jy
! Clean residual min=-0.003318 max=0.003889 Jy/beam
! Clean residual mean=-0.000005 rms=0.000763 Jy/beam
! Combined flux in latest and established models = 0.274509 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.274509 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.826 mas, bmaj=1.998 mas, bpa=-2.046 degrees
! Estimated noise=0.230916 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00553858 Jy
! Component: 100  -  total flux cleaned = 0.00908505 Jy
! Component: 150  -  total flux cleaned = 0.0116407 Jy
! Component: 200  -  total flux cleaned = 0.0134848 Jy
! Total flux subtracted in 200 components = 0.0134848 Jy
! Clean residual min=-0.001536 max=0.001786 Jy/beam
! Clean residual mean=-0.000003 rms=0.000383 Jy/beam
! Combined flux in latest and established models = 0.287994 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 30 components and 0.287994 Jy
! Inverting map 
! Added new window around map position (3.2, -1.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00146724 Jy
! Component: 100  -  total flux cleaned = 0.0022819 Jy
! Component: 150  -  total flux cleaned = 0.00288474 Jy
! Component: 200  -  total flux cleaned = 0.0032892 Jy
! Total flux subtracted in 200 components = 0.0032892 Jy
! Clean residual min=-0.001445 max=0.001442 Jy/beam
! Clean residual mean=-0.000003 rms=0.000336 Jy/beam
! Combined flux in latest and established models = 0.291283 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 46 components and 0.291283 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.2 mas, bmaj=4.53 mas, bpa=4.353 degrees
! Estimated noise=0.296059 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00091448 Jy
! Component: 100  -  total flux cleaned = 0.00129475 Jy
! Component: 150  -  total flux cleaned = 0.001596 Jy
! Component: 200  -  total flux cleaned = 0.00176948 Jy
! Total flux subtracted in 200 components = 0.00176948 Jy
! Clean residual min=-0.001383 max=0.001518 Jy/beam
! Clean residual mean=-0.000005 rms=0.000436 Jy/beam
! Combined flux in latest and established models = 0.293052 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.82144e-05 Jy
! Component: 100  -  total flux cleaned = 0.000126978 Jy
! Component: 150  -  total flux cleaned = 0.000140679 Jy
! Component: 200  -  total flux cleaned = 0.000177961 Jy
! Total flux subtracted in 200 components = 0.000177961 Jy
! Clean residual min=-0.001387 max=0.001489 Jy/beam
! Clean residual mean=-0.000005 rms=0.000431 Jy/beam
! Combined flux in latest and established models = 0.29323 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 74 components and 0.29323 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.826 mas, bmaj=1.998 mas, bpa=-2.046 degrees
! Estimated noise=0.230916 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000115295 Jy
! Component: 100  -  total flux cleaned = -0.000116607 Jy
! Component: 150  -  total flux cleaned = -6.61194e-05 Jy
! Component: 200  -  total flux cleaned = -4.26708e-05 Jy
! Total flux subtracted in 200 components = -4.26708e-05 Jy
! Clean residual min=-0.001211 max=0.001507 Jy/beam
! Clean residual mean=-0.000002 rms=0.000315 Jy/beam
! Combined flux in latest and established models = 0.293188 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 84 components and 0.293187 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065781Jy  sigma=1.249646
! Fit after  self-cal, rms=0.065768Jy  sigma=1.249405
wmodel J0219-1842_X_map.mod
! Writing 84 model components to file: J0219-1842_X_map.mod
wobs   J0219-1842_X_uvs.fits
! Writing UV FITS file: J0219-1842_X_uvs.fits
wwins  J0219-1842_X_map.win
! wwins: Wrote 5 windows to J0219-1842_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000652169 Jy
! Component: 100  -  total flux cleaned = 0.000954549 Jy
! Component: 150  -  total flux cleaned = 0.000998199 Jy
! Component: 200  -  total flux cleaned = 0.000997845 Jy
! Component: 250  -  total flux cleaned = 0.000957998 Jy
! Component: 300  -  total flux cleaned = 0.000996352 Jy
! Component: 350  -  total flux cleaned = 0.000977566 Jy
! Component: 400  -  total flux cleaned = 0.00103224 Jy
! Component: 450  -  total flux cleaned = 0.00106809 Jy
! Component: 500  -  total flux cleaned = 0.00112053 Jy
! Component: 550  -  total flux cleaned = 0.00110326 Jy
! Component: 600  -  total flux cleaned = 0.00112012 Jy
! Component: 650  -  total flux cleaned = 0.00115359 Jy
! Component: 700  -  total flux cleaned = 0.00113721 Jy
! Component: 750  -  total flux cleaned = 0.00115356 Jy
! Component: 800  -  total flux cleaned = 0.00115346 Jy
! Component: 850  -  total flux cleaned = 0.00113773 Jy
! Component: 900  -  total flux cleaned = 0.00115359 Jy
! Component: 950  -  total flux cleaned = 0.00118418 Jy
! Component: 1000  -  total flux cleaned = 0.00121454 Jy
! Component: 1050  -  total flux cleaned = 0.00122935 Jy
! Component: 1100  -  total flux cleaned = 0.00121481 Jy
! Component: 1150  -  total flux cleaned = 0.00127313 Jy
! Component: 1200  -  total flux cleaned = 0.00127292 Jy
! Component: 1250  -  total flux cleaned = 0.00125869 Jy
! Component: 1300  -  total flux cleaned = 0.00130098 Jy
! Component: 1350  -  total flux cleaned = 0.00135659 Jy
! Component: 1400  -  total flux cleaned = 0.00137032 Jy
! Component: 1450  -  total flux cleaned = 0.00141133 Jy
! Component: 1500  -  total flux cleaned = 0.00145182 Jy
! Component: 1550  -  total flux cleaned = 0.00149186 Jy
! Component: 1600  -  total flux cleaned = 0.00151829 Jy
! Component: 1650  -  total flux cleaned = 0.00157048 Jy
! Component: 1700  -  total flux cleaned = 0.00159609 Jy
! Component: 1750  -  total flux cleaned = 0.00160855 Jy
! Component: 1800  -  total flux cleaned = 0.00162104 Jy
! Component: 1850  -  total flux cleaned = 0.00163335 Jy
! Component: 1900  -  total flux cleaned = 0.00163341 Jy
! Component: 1950  -  total flux cleaned = 0.00167018 Jy
! Component: 2000  -  total flux cleaned = 0.00167003 Jy
! Component: 2050  -  total flux cleaned = 0.00161015 Jy
! Component: 2100  -  total flux cleaned = 0.00164599 Jy
! Component: 2150  -  total flux cleaned = 0.00162234 Jy
! Component: 2200  -  total flux cleaned = 0.00158702 Jy
! Component: 2250  -  total flux cleaned = 0.00161012 Jy
! Component: 2300  -  total flux cleaned = 0.00154092 Jy
! Component: 2350  -  total flux cleaned = 0.00154092 Jy
! Component: 2400  -  total flux cleaned = 0.00154104 Jy
! Component: 2450  -  total flux cleaned = 0.00156343 Jy
! Component: 2500  -  total flux cleaned = 0.00149658 Jy
! Component: 2550  -  total flux cleaned = 0.00152981 Jy
! Component: 2600  -  total flux cleaned = 0.00148577 Jy
! Component: 2650  -  total flux cleaned = 0.0014531 Jy
! Component: 2700  -  total flux cleaned = 0.00145311 Jy
! Component: 2750  -  total flux cleaned = 0.00142099 Jy
! Component: 2800  -  total flux cleaned = 0.00142108 Jy
! Component: 2850  -  total flux cleaned = 0.00138924 Jy
! Component: 2900  -  total flux cleaned = 0.00137874 Jy
! Component: 2950  -  total flux cleaned = 0.00129521 Jy
! Component: 3000  -  total flux cleaned = 0.00130568 Jy
! Component: 3050  -  total flux cleaned = 0.00130574 Jy
! Component: 3100  -  total flux cleaned = 0.00124427 Jy
! Component: 3150  -  total flux cleaned = 0.00125441 Jy
! Component: 3200  -  total flux cleaned = 0.00120395 Jy
! Component: 3250  -  total flux cleaned = 0.00118384 Jy
! Component: 3300  -  total flux cleaned = 0.00119378 Jy
! Component: 3350  -  total flux cleaned = 0.00110439 Jy
! Component: 3400  -  total flux cleaned = 0.00109454 Jy
! Component: 3450  -  total flux cleaned = 0.00103574 Jy
! Component: 3500  -  total flux cleaned = 0.000977365 Jy
! Component: 3550  -  total flux cleaned = 0.000967776 Jy
! Component: 3600  -  total flux cleaned = 0.000977454 Jy
! Component: 3650  -  total flux cleaned = 0.000958231 Jy
! Component: 3700  -  total flux cleaned = 0.000910697 Jy
! Component: 3750  -  total flux cleaned = 0.000872827 Jy
! Component: 3800  -  total flux cleaned = 0.000854085 Jy
! Component: 3850  -  total flux cleaned = 0.000844684 Jy
! Component: 3900  -  total flux cleaned = 0.000788951 Jy
! Component: 3950  -  total flux cleaned = 0.000788882 Jy
! Component: 4000  -  total flux cleaned = 0.000733691 Jy
! Component: 4050  -  total flux cleaned = 0.000742796 Jy
! Total flux subtracted in 4096 components = 0.000715523 Jy
! Clean residual min=-0.000497 max=0.000518 Jy/beam
! Clean residual mean=-0.000000 rms=0.000154 Jy/beam
! Combined flux in latest and established models = 0.293903 Jy
keep
! Adding 290 model components to the UV plane model.
! The established model now contains 374 components and 0.293903 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0219-1842_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.826 x 1.998 at -2.046 degrees (North through East)
! Clean map  min=-0.00092943  max=0.2551 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0219-1842_X_map.fits
wmodel /vlbi/uf001/uva//J0219-1842_X_map.mod
! Writing 374 model components to file: /vlbi/uf001/uva//J0219-1842_X_map.mod
wobs   /vlbi/uf001/uva//J0219-1842_X_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0219-1842_X_uvs.fits
wwins  /vlbi/uf001/uva//J0219-1842_X_map.win
! wwins: Wrote 6 windows to /vlbi/uf001/uva//J0219-1842_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.255102 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00015341 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.180411 0.180411 0.360822 0.721644 1.44329 2.88657 5.77315 11.5463 23.0926 46.1852 92.3704
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.255 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1662.87 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0219-1842_X_dfm.log closed on Sun Jan 13 21:23:14 2019