! Started logfile: /vlbi/uf001/uva//J0219-1842_S_dfm.log on Sun Jan 13 21:23:04 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J0219-1842_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0219-1842_S_uva.fits
! AN table 1: 38 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.970175 visibilities/baseline/integration-bin.
! Found source: J0219-1842
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 4977 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0219-1842_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.020851Jy  sigma=18.558611
! Fit after  self-cal, rms=0.716528Jy  sigma=12.722744
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.557 mas, bmaj=6.535 mas, bpa=-2.818 degrees
! Estimated noise=0.859805 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.224455 Jy
! Component: 100  -  total flux cleaned = 0.275595 Jy
! Total flux subtracted in 100 components = 0.275595 Jy
! Clean residual min=-0.013946 max=0.022427 Jy/beam
! Clean residual mean=0.000010 rms=0.003721 Jy/beam
! Combined flux in latest and established models = 0.275595 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.275595 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.101659Jy  sigma=1.655112
! Fit after  self-cal, rms=0.101668Jy  sigma=1.654935
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.078 mas, bmaj=7.707 mas, bpa=-3.089 degrees
! Estimated noise=0.574377 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (3, -8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0263328 Jy
! Component: 100  -  total flux cleaned = 0.041571 Jy
! Component: 150  -  total flux cleaned = 0.049032 Jy
! Component: 200  -  total flux cleaned = 0.0521829 Jy
! Total flux subtracted in 200 components = 0.0521829 Jy
! Clean residual min=-0.012359 max=0.014684 Jy/beam
! Clean residual mean=0.000027 rms=0.002825 Jy/beam
! Combined flux in latest and established models = 0.327778 Jy
! Performing phase self-cal
! Adding 47 model components to the UV plane model.
! The established model now contains 51 components and 0.327778 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.094266Jy  sigma=1.499865
! Fit after  self-cal, rms=0.093969Jy  sigma=1.492454
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.078 x 7.707 at -3.089 degrees (North through East)
! Clean map  min=-0.012535  max=0.28085 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.93     HN        1.07     KP        0.98     
!   LA        0.92     MK        1.01     NL        1.02     OV        0.94     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.49     FD        0.90     HN        1.08     KP        1.02     
!   LA        0.94     MK        1.01     NL        1.08     OV        0.99     
!   PT        0.96     SC        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.92     HN        1.07     KP        1.02     
!   LA        0.93     MK        1.01     NL        1.06     OV        0.93     
!   PT        0.96     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.093969Jy  sigma=1.492454
! Fit after  self-cal, rms=0.095674Jy  sigma=1.393437
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.099 mas, bmaj=7.78 mas, bpa=-2.803 degrees
! Estimated noise=0.56999 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00270665 Jy
! Component: 100  -  total flux cleaned = -0.00351638 Jy
! Component: 150  -  total flux cleaned = -0.00422725 Jy
! Component: 200  -  total flux cleaned = -0.0048626 Jy
! Total flux subtracted in 200 components = -0.0048626 Jy
! Clean residual min=-0.009226 max=0.009731 Jy/beam
! Clean residual mean=0.000032 rms=0.002157 Jy/beam
! Combined flux in latest and established models = 0.322915 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 63 components and 0.322915 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.095007Jy  sigma=1.386611
! Fit after  self-cal, rms=0.095091Jy  sigma=1.385769
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.095091Jy  sigma=1.385769
! Fit after  self-cal, rms=0.096019Jy  sigma=1.273448
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.095 mas, bmaj=7.795 mas, bpa=-3.274 degrees
! Estimated noise=0.57429 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00215214 Jy
! Component: 100  -  total flux cleaned = -0.00225953 Jy
! Component: 150  -  total flux cleaned = -0.00216709 Jy
! Component: 200  -  total flux cleaned = -0.00208607 Jy
! Total flux subtracted in 200 components = -0.00208607 Jy
! Clean residual min=-0.003625 max=0.003244 Jy/beam
! Clean residual mean=-0.000000 rms=0.000865 Jy/beam
! Combined flux in latest and established models = 0.320829 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 73 components and 0.320829 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.095773Jy  sigma=1.269258
! Fit after  self-cal, rms=0.095875Jy  sigma=1.268745
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.951e-05 Jy
! Component: 100  -  total flux cleaned = -2.51647e-05 Jy
! Component: 150  -  total flux cleaned = -2.51961e-05 Jy
! Component: 200  -  total flux cleaned = 3.82204e-05 Jy
! Total flux subtracted in 200 components = 3.82204e-05 Jy
! Clean residual min=-0.003580 max=0.003131 Jy/beam
! Clean residual mean=-0.000000 rms=0.000828 Jy/beam
! Combined flux in latest and established models = 0.320867 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 77 components and 0.320867 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.095768Jy  sigma=1.266758
! Fit after  self-cal, rms=0.095763Jy  sigma=1.266674
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.095763Jy  sigma=1.266674
! Fit after  self-cal, rms=0.097017Jy  sigma=1.265820
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.093 mas, bmaj=7.789 mas, bpa=-3.285 degrees
! Estimated noise=0.57259 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00147058 Jy
! Component: 100  -  total flux cleaned = -0.00140042 Jy
! Component: 150  -  total flux cleaned = -0.00133937 Jy
! Component: 200  -  total flux cleaned = -0.00122317 Jy
! Total flux subtracted in 200 components = -0.00122317 Jy
! Clean residual min=-0.003393 max=0.003013 Jy/beam
! Clean residual mean=-0.000002 rms=0.000771 Jy/beam
! Combined flux in latest and established models = 0.319644 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 81 components and 0.319644 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.096901Jy  sigma=1.264003
! Fit after  self-cal, rms=0.096908Jy  sigma=1.263909
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000131702 Jy
! Component: 100  -  total flux cleaned = -2.58122e-05 Jy
! Component: 150  -  total flux cleaned = -2.76173e-05 Jy
! Component: 200  -  total flux cleaned = -2.71825e-05 Jy
! Total flux subtracted in 200 components = -2.71825e-05 Jy
! Clean residual min=-0.003326 max=0.002936 Jy/beam
! Clean residual mean=-0.000002 rms=0.000751 Jy/beam
! Combined flux in latest and established models = 0.319617 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 84 components and 0.319617 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.096847Jy  sigma=1.262865
! Fit after  self-cal, rms=0.096847Jy  sigma=1.262830
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.096847Jy  sigma=1.262830
! Fit after  self-cal, rms=0.097437Jy  sigma=1.262524
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.623 mas, bmaj=16.19 mas, bpa=0.8431 degrees
! Estimated noise=0.7349 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00015825 Jy
! Component: 100  -  total flux cleaned = 0.000154305 Jy
! Component: 150  -  total flux cleaned = 0.00011481 Jy
! Component: 200  -  total flux cleaned = 0.000116961 Jy
! Total flux subtracted in 200 components = 0.000116961 Jy
! Clean residual min=-0.003027 max=0.002983 Jy/beam
! Clean residual mean=-0.000005 rms=0.000835 Jy/beam
! Combined flux in latest and established models = 0.319734 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 97 components and 0.319734 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.097419Jy  sigma=1.262336
! Fit after  self-cal, rms=0.097422Jy  sigma=1.262229
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.33633e-05 Jy
! Component: 100  -  total flux cleaned = 2.34677e-05 Jy
! Component: 150  -  total flux cleaned = -3.36976e-05 Jy
! Component: 200  -  total flux cleaned = -6.05946e-05 Jy
! Total flux subtracted in 200 components = -6.05946e-05 Jy
! Clean residual min=-0.002968 max=0.002925 Jy/beam
! Clean residual mean=-0.000005 rms=0.000821 Jy/beam
! Combined flux in latest and established models = 0.319673 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 103 components and 0.319673 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.097416Jy  sigma=1.262257
! Fit after  self-cal, rms=0.097415Jy  sigma=1.262181
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.09 mas, bmaj=7.784 mas, bpa=-3.292 degrees
! Estimated noise=0.571154 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.09 x 7.784 at -3.292 degrees (North through East)
! Clean map  min=-0.0029318  max=0.28208 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.557 mas, bmaj=6.603 mas, bpa=-3.207 degrees
! Estimated noise=0.864272 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.225506 Jy
! Component: 100  -  total flux cleaned = 0.276175 Jy
! Component: 150  -  total flux cleaned = 0.293246 Jy
! Component: 200  -  total flux cleaned = 0.302479 Jy
! Total flux subtracted in 200 components = 0.302479 Jy
! Clean residual min=-0.004686 max=0.004930 Jy/beam
! Clean residual mean=-0.000005 rms=0.001239 Jy/beam
! Combined flux in latest and established models = 0.302479 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 28 model components to the UV plane model.
! The established model now contains 28 components and 0.302479 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.09 mas, bmaj=7.784 mas, bpa=-3.292 degrees
! Estimated noise=0.571154 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00752189 Jy
! Component: 100  -  total flux cleaned = 0.0115768 Jy
! Component: 150  -  total flux cleaned = 0.0135515 Jy
! Component: 200  -  total flux cleaned = 0.0142953 Jy
! Total flux subtracted in 200 components = 0.0142953 Jy
! Clean residual min=-0.002924 max=0.002702 Jy/beam
! Clean residual mean=-0.000003 rms=0.000720 Jy/beam
! Combined flux in latest and established models = 0.316774 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 62 components and 0.316775 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.623 mas, bmaj=16.19 mas, bpa=0.8431 degrees
! Estimated noise=0.7349 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00214365 Jy
! Component: 100  -  total flux cleaned = 0.00229721 Jy
! Component: 150  -  total flux cleaned = 0.00225708 Jy
! Component: 200  -  total flux cleaned = 0.00221966 Jy
! Total flux subtracted in 200 components = 0.00221966 Jy
! Clean residual min=-0.002732 max=0.002963 Jy/beam
! Clean residual mean=-0.000006 rms=0.000822 Jy/beam
! Combined flux in latest and established models = 0.318994 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.29516e-05 Jy
! Component: 100  -  total flux cleaned = -6.13825e-05 Jy
! Component: 150  -  total flux cleaned = -6.14511e-05 Jy
! Component: 200  -  total flux cleaned = -8.49809e-05 Jy
! Total flux subtracted in 200 components = -8.49809e-05 Jy
! Clean residual min=-0.002722 max=0.002901 Jy/beam
! Clean residual mean=-0.000006 rms=0.000810 Jy/beam
! Combined flux in latest and established models = 0.318909 Jy
! Adding 44 model components to the UV plane model.
! The established model now contains 104 components and 0.318909 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.09 mas, bmaj=7.784 mas, bpa=-3.292 degrees
! Estimated noise=0.571154 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000304627 Jy
! Component: 100  -  total flux cleaned = -0.00023481 Jy
! Component: 150  -  total flux cleaned = -0.00023445 Jy
! Component: 200  -  total flux cleaned = -0.000205031 Jy
! Total flux subtracted in 200 components = -0.000205031 Jy
! Clean residual min=-0.002744 max=0.002686 Jy/beam
! Clean residual mean=-0.000002 rms=0.000676 Jy/beam
! Combined flux in latest and established models = 0.318704 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 121 components and 0.318704 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.097313Jy  sigma=1.259501
! Fit after  self-cal, rms=0.097290Jy  sigma=1.259225
wmodel J0219-1842_S_map.mod
! Writing 121 model components to file: J0219-1842_S_map.mod
wobs   J0219-1842_S_uvs.fits
! Writing UV FITS file: J0219-1842_S_uvs.fits
wwins  J0219-1842_S_map.win
! wwins: Wrote 2 windows to J0219-1842_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000158379 Jy
! Component: 100  -  total flux cleaned = -0.000347043 Jy
! Component: 150  -  total flux cleaned = -0.000480811 Jy
! Component: 200  -  total flux cleaned = -0.000650829 Jy
! Component: 250  -  total flux cleaned = -0.000731412 Jy
! Component: 300  -  total flux cleaned = -0.000809543 Jy
! Component: 350  -  total flux cleaned = -0.000923763 Jy
! Component: 400  -  total flux cleaned = -0.00118072 Jy
! Component: 450  -  total flux cleaned = -0.00135984 Jy
! Component: 500  -  total flux cleaned = -0.00146499 Jy
! Component: 550  -  total flux cleaned = -0.00153334 Jy
! Component: 600  -  total flux cleaned = -0.00160103 Jy
! Component: 650  -  total flux cleaned = -0.00173186 Jy
! Component: 700  -  total flux cleaned = -0.00170006 Jy
! Component: 750  -  total flux cleaned = -0.00176341 Jy
! Component: 800  -  total flux cleaned = -0.00173261 Jy
! Component: 850  -  total flux cleaned = -0.00176291 Jy
! Component: 900  -  total flux cleaned = -0.00179315 Jy
! Component: 950  -  total flux cleaned = -0.00179312 Jy
! Component: 1000  -  total flux cleaned = -0.00182224 Jy
! Component: 1050  -  total flux cleaned = -0.00185072 Jy
! Component: 1100  -  total flux cleaned = -0.00187901 Jy
! Component: 1150  -  total flux cleaned = -0.00187884 Jy
! Component: 1200  -  total flux cleaned = -0.0019874 Jy
! Component: 1250  -  total flux cleaned = -0.00193379 Jy
! Component: 1300  -  total flux cleaned = -0.00196013 Jy
! Component: 1350  -  total flux cleaned = -0.00195981 Jy
! Component: 1400  -  total flux cleaned = -0.00190847 Jy
! Component: 1450  -  total flux cleaned = -0.00193386 Jy
! Component: 1500  -  total flux cleaned = -0.00193346 Jy
! Component: 1550  -  total flux cleaned = -0.00185937 Jy
! Component: 1600  -  total flux cleaned = -0.00181066 Jy
! Component: 1650  -  total flux cleaned = -0.00188323 Jy
! Component: 1700  -  total flux cleaned = -0.00197804 Jy
! Component: 1750  -  total flux cleaned = -0.00190687 Jy
! Component: 1800  -  total flux cleaned = -0.00193031 Jy
! Component: 1850  -  total flux cleaned = -0.00188425 Jy
! Component: 1900  -  total flux cleaned = -0.00186172 Jy
! Component: 1950  -  total flux cleaned = -0.00190673 Jy
! Component: 2000  -  total flux cleaned = -0.0019512 Jy
! Component: 2050  -  total flux cleaned = -0.00203883 Jy
! Component: 2100  -  total flux cleaned = -0.0020168 Jy
! Component: 2150  -  total flux cleaned = -0.00203842 Jy
! Component: 2200  -  total flux cleaned = -0.00208075 Jy
! Component: 2250  -  total flux cleaned = -0.00208056 Jy
! Component: 2300  -  total flux cleaned = -0.00201803 Jy
! Component: 2350  -  total flux cleaned = -0.00205965 Jy
! Component: 2400  -  total flux cleaned = -0.00205971 Jy
! Component: 2450  -  total flux cleaned = -0.00201961 Jy
! Component: 2500  -  total flux cleaned = -0.00213996 Jy
! Component: 2550  -  total flux cleaned = -0.00215933 Jy
! Component: 2600  -  total flux cleaned = -0.00215928 Jy
! Component: 2650  -  total flux cleaned = -0.00225631 Jy
! Component: 2700  -  total flux cleaned = -0.00223714 Jy
! Component: 2750  -  total flux cleaned = -0.00231354 Jy
! Component: 2800  -  total flux cleaned = -0.00229494 Jy
! Component: 2850  -  total flux cleaned = -0.00238903 Jy
! Component: 2900  -  total flux cleaned = -0.00244494 Jy
! Component: 2950  -  total flux cleaned = -0.00257409 Jy
! Component: 3000  -  total flux cleaned = -0.00262882 Jy
! Component: 3050  -  total flux cleaned = -0.00264694 Jy
! Component: 3100  -  total flux cleaned = -0.00270084 Jy
! Component: 3150  -  total flux cleaned = -0.00273636 Jy
! Component: 3200  -  total flux cleaned = -0.00275433 Jy
! Component: 3250  -  total flux cleaned = -0.00291224 Jy
! Component: 3300  -  total flux cleaned = -0.00292973 Jy
! Component: 3350  -  total flux cleaned = -0.00296438 Jy
! Component: 3400  -  total flux cleaned = -0.003033 Jy
! Component: 3450  -  total flux cleaned = -0.00304993 Jy
! Component: 3500  -  total flux cleaned = -0.00311742 Jy
! Component: 3550  -  total flux cleaned = -0.00316781 Jy
! Component: 3600  -  total flux cleaned = -0.00316763 Jy
! Component: 3650  -  total flux cleaned = -0.00329981 Jy
! Component: 3700  -  total flux cleaned = -0.00328317 Jy
! Component: 3750  -  total flux cleaned = -0.00329943 Jy
! Component: 3800  -  total flux cleaned = -0.0033479 Jy
! Component: 3850  -  total flux cleaned = -0.00333176 Jy
! Component: 3900  -  total flux cleaned = -0.00334785 Jy
! Component: 3950  -  total flux cleaned = -0.00337958 Jy
! Component: 4000  -  total flux cleaned = -0.00341102 Jy
! Component: 4050  -  total flux cleaned = -0.00344228 Jy
! Total flux subtracted in 4096 components = -0.00341105 Jy
! Clean residual min=-0.000928 max=0.000938 Jy/beam
! Clean residual mean=-0.000000 rms=0.000288 Jy/beam
! Combined flux in latest and established models = 0.315293 Jy
keep
! Adding 288 model components to the UV plane model.
! The established model now contains 409 components and 0.315293 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0219-1842_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.09 x 7.784 at -3.292 degrees (North through East)
! Clean map  min=-0.0019351  max=0.28562 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0219-1842_S_map.fits
wmodel /vlbi/uf001/uva//J0219-1842_S_map.mod
! Writing 409 model components to file: /vlbi/uf001/uva//J0219-1842_S_map.mod
wobs   /vlbi/uf001/uva//J0219-1842_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0219-1842_S_uvs.fits
wwins  /vlbi/uf001/uva//J0219-1842_S_map.win
! wwins: Wrote 3 windows to /vlbi/uf001/uva//J0219-1842_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.285625 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000284772 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.299105 0.299105 0.59821 1.19642 2.39284 4.78568 9.57135 19.1427 38.2854 76.5708
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.285 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1002.99 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0219-1842_S_dfm.log closed on Sun Jan 13 21:23:08 2019