! Started logfile: /vlbi/uf001/uvm//J0214-2113_S_a_dfm.log on Sun Jan 13 20:34:46 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /vlbi/uf001/uvm//J0214-2113_S_a_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J0214-2113_S_a_uvm.fits ! AN table 1: 38 integrations on 21 of 21 possible baselines. ! AN table 2: 73 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.862421 visibilities/baseline/integration-bin. ! Found source: J0214-2113 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 40 lines of history. ! ! Reading 7353 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0214-2113_S_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 20 telescope corrections were flagged in sub-array 1. ! A total of 44 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 20 telescope corrections were flagged in sub-array 1. ! A total of 44 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 20 telescope corrections were flagged in sub-array 1. ! A total of 44 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.007049Jy sigma=17.592776 ! Fit after self-cal, rms=0.924342Jy sigma=16.114187 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.8 mas, bmaj=14.9 mas, bpa=-18.25 degrees ! Estimated noise=0.669935 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0570115 Jy ! Component: 100 - total flux cleaned = 0.0706225 Jy ! Total flux subtracted in 100 components = 0.0706225 Jy ! Clean residual min=-0.004000 max=0.005459 Jy/beam ! Clean residual mean=-0.000025 rms=0.001135 Jy/beam ! Combined flux in latest and established models = 0.0706225 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0706225 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.085323Jy sigma=1.264810 ! Fit after self-cal, rms=0.084780Jy sigma=1.254874 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.505 mas, bmaj=16.01 mas, bpa=-17.7 degrees ! Estimated noise=0.489679 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00928341 Jy ! Component: 100 - total flux cleaned = 0.0134851 Jy ! Component: 150 - total flux cleaned = 0.0159036 Jy ! Component: 200 - total flux cleaned = 0.017368 Jy ! Total flux subtracted in 200 components = 0.017368 Jy ! Clean residual min=-0.003674 max=0.003210 Jy/beam ! Clean residual mean=-0.000005 rms=0.000853 Jy/beam ! Combined flux in latest and established models = 0.0879905 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 46 components and 0.0879905 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.083662Jy sigma=1.236867 ! Fit after self-cal, rms=0.083643Jy sigma=1.236432 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.505 x 16.01 at -17.7 degrees (North through East) ! Clean map min=-0.0035722 max=0.077386 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00 HN 0.99 KP 1.12 LA 0.90 ! NL 1.03 OV 0.99 PT 1.05 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.08 FD 0.94 HN 1.05 KP 1.06 ! LA 0.93 MK 0.96 NL 1.12 PT 1.07 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 1.01 HN 1.11 KP 1.00 LA 0.96 ! NL 1.07 OV 0.90 PT 1.15 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.79 FD 0.98 HN 0.99 KP 1.01 ! LA 0.98 MK 1.05 NL 0.69 PT 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 1.06 HN 1.01 KP 0.99 LA 0.99 ! NL 1.04 OV 1.05 PT 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.09 FD 0.92 HN 1.03 KP 1.11 ! LA 0.95 MK 1.07 NL 0.95 PT 1.01 ! ! ! Fit before self-cal, rms=0.083643Jy sigma=1.236432 ! Fit after self-cal, rms=0.078885Jy sigma=1.224084 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.53 mas, bmaj=16.01 mas, bpa=-17.63 degrees ! Estimated noise=0.488298 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000497452 Jy ! Component: 100 - total flux cleaned = 0.000560332 Jy ! Component: 150 - total flux cleaned = 0.000589115 Jy ! Component: 200 - total flux cleaned = 0.000616308 Jy ! Total flux subtracted in 200 components = 0.000616308 Jy ! Clean residual min=-0.002874 max=0.002747 Jy/beam ! Clean residual mean=-0.000007 rms=0.000722 Jy/beam ! Combined flux in latest and established models = 0.0886068 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 61 components and 0.0886068 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.078854Jy sigma=1.223731 ! Fit after self-cal, rms=0.078978Jy sigma=1.222486 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.078978Jy sigma=1.222486 ! Fit after self-cal, rms=0.078262Jy sigma=1.214064 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.521 mas, bmaj=16.13 mas, bpa=-17.8 degrees ! Estimated noise=0.492554 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000302213 Jy ! Component: 100 - total flux cleaned = 0.000553255 Jy ! Component: 150 - total flux cleaned = 0.000619112 Jy ! Component: 200 - total flux cleaned = 0.000639179 Jy ! Total flux subtracted in 200 components = 0.000639179 Jy ! Clean residual min=-0.002458 max=0.002310 Jy/beam ! Clean residual mean=-0.000004 rms=0.000588 Jy/beam ! Combined flux in latest and established models = 0.089246 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 75 components and 0.089246 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.078244Jy sigma=1.213787 ! Fit after self-cal, rms=0.078337Jy sigma=1.213396 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000116638 Jy ! Component: 100 - total flux cleaned = -8.14128e-05 Jy ! Component: 150 - total flux cleaned = -4.91514e-05 Jy ! Component: 200 - total flux cleaned = -4.86866e-05 Jy ! Total flux subtracted in 200 components = -4.86866e-05 Jy ! Clean residual min=-0.002517 max=0.002352 Jy/beam ! Clean residual mean=-0.000004 rms=0.000593 Jy/beam ! Combined flux in latest and established models = 0.0891973 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 77 components and 0.0891973 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.078328Jy sigma=1.213302 ! Fit after self-cal, rms=0.078325Jy sigma=1.213291 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.078325Jy sigma=1.213291 ! Fit after self-cal, rms=0.078354Jy sigma=1.210128 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.524 mas, bmaj=16.06 mas, bpa=-17.89 degrees ! Estimated noise=0.490638 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000184691 Jy ! Component: 100 - total flux cleaned = 0.000231377 Jy ! Component: 150 - total flux cleaned = 0.000270408 Jy ! Component: 200 - total flux cleaned = 0.00032383 Jy ! Total flux subtracted in 200 components = 0.00032383 Jy ! Clean residual min=-0.002125 max=0.002134 Jy/beam ! Clean residual mean=-0.000002 rms=0.000532 Jy/beam ! Combined flux in latest and established models = 0.0895211 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 87 components and 0.0895211 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.078342Jy sigma=1.209966 ! Fit after self-cal, rms=0.078387Jy sigma=1.209722 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.41116e-05 Jy ! Component: 100 - total flux cleaned = 6.64051e-05 Jy ! Component: 150 - total flux cleaned = 9.60109e-05 Jy ! Component: 200 - total flux cleaned = 0.000109591 Jy ! Total flux subtracted in 200 components = 0.000109591 Jy ! Clean residual min=-0.002175 max=0.002177 Jy/beam ! Clean residual mean=-0.000002 rms=0.000529 Jy/beam ! Combined flux in latest and established models = 0.0896307 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 91 components and 0.0896307 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.078380Jy sigma=1.209652 ! Fit after self-cal, rms=0.078383Jy sigma=1.209648 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.078383Jy sigma=1.209648 ! Fit after self-cal, rms=0.078356Jy sigma=1.209558 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.972 mas, bmaj=22.71 mas, bpa=-7.687 degrees ! Estimated noise=0.576892 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000169576 Jy ! Component: 100 - total flux cleaned = 0.000231722 Jy ! Component: 150 - total flux cleaned = 0.000272785 Jy ! Component: 200 - total flux cleaned = 0.000309486 Jy ! Total flux subtracted in 200 components = 0.000309486 Jy ! Clean residual min=-0.002374 max=0.002131 Jy/beam ! Clean residual mean=-0.000004 rms=0.000671 Jy/beam ! Combined flux in latest and established models = 0.0899402 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 104 components and 0.0899402 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.078353Jy sigma=1.209474 ! Fit after self-cal, rms=0.078370Jy sigma=1.209460 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.04859e-05 Jy ! Component: 100 - total flux cleaned = 0.000113152 Jy ! Component: 150 - total flux cleaned = 0.000132171 Jy ! Component: 200 - total flux cleaned = 0.000157971 Jy ! Total flux subtracted in 200 components = 0.000157971 Jy ! Clean residual min=-0.002387 max=0.002163 Jy/beam ! Clean residual mean=-0.000004 rms=0.000669 Jy/beam ! Combined flux in latest and established models = 0.0900982 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 117 components and 0.0900982 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.078368Jy sigma=1.209431 ! Fit after self-cal, rms=0.078368Jy sigma=1.209424 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.525 mas, bmaj=16.04 mas, bpa=-17.92 degrees ! Estimated noise=0.489663 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.525 x 16.04 at -17.92 degrees (North through East) ! Clean map min=-0.0020533 max=0.077204 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.811 mas, bmaj=15.04 mas, bpa=-18.4 degrees ! Estimated noise=0.679005 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0579804 Jy ! Component: 100 - total flux cleaned = 0.0720864 Jy ! Component: 150 - total flux cleaned = 0.0779755 Jy ! Component: 200 - total flux cleaned = 0.0814695 Jy ! Total flux subtracted in 200 components = 0.0814695 Jy ! Clean residual min=-0.002789 max=0.002757 Jy/beam ! Clean residual mean=-0.000012 rms=0.000733 Jy/beam ! Combined flux in latest and established models = 0.0814695 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.0814695 Jy ! Inverting map and beam ! Estimated beam: bmin=3.525 mas, bmaj=16.04 mas, bpa=-17.92 degrees ! Estimated noise=0.489663 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00356252 Jy ! Component: 100 - total flux cleaned = 0.00554524 Jy ! Component: 150 - total flux cleaned = 0.00682151 Jy ! Component: 200 - total flux cleaned = 0.0076565 Jy ! Total flux subtracted in 200 components = 0.0076565 Jy ! Clean residual min=-0.002120 max=0.002285 Jy/beam ! Clean residual mean=-0.000004 rms=0.000539 Jy/beam ! Combined flux in latest and established models = 0.089126 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 57 components and 0.089126 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.972 mas, bmaj=22.71 mas, bpa=-7.687 degrees ! Estimated noise=0.576892 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000656437 Jy ! Component: 100 - total flux cleaned = 0.000711447 Jy ! Component: 150 - total flux cleaned = 0.00077274 Jy ! Component: 200 - total flux cleaned = 0.000812214 Jy ! Total flux subtracted in 200 components = 0.000812214 Jy ! Clean residual min=-0.002445 max=0.002188 Jy/beam ! Clean residual mean=-0.000005 rms=0.000679 Jy/beam ! Combined flux in latest and established models = 0.0899382 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.38883e-05 Jy ! Component: 100 - total flux cleaned = 4.42371e-05 Jy ! Component: 150 - total flux cleaned = 5.41167e-05 Jy ! Component: 200 - total flux cleaned = 6.32486e-05 Jy ! Total flux subtracted in 200 components = 6.32486e-05 Jy ! Clean residual min=-0.002434 max=0.002186 Jy/beam ! Clean residual mean=-0.000004 rms=0.000675 Jy/beam ! Combined flux in latest and established models = 0.0900014 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 87 components and 0.0900014 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.525 mas, bmaj=16.04 mas, bpa=-17.92 degrees ! Estimated noise=0.489663 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000140794 Jy ! Component: 100 - total flux cleaned = -6.92036e-05 Jy ! Component: 150 - total flux cleaned = -2.37643e-05 Jy ! Component: 200 - total flux cleaned = 4.55308e-06 Jy ! Total flux subtracted in 200 components = 4.55308e-06 Jy ! Clean residual min=-0.002166 max=0.002245 Jy/beam ! Clean residual mean=-0.000003 rms=0.000526 Jy/beam ! Combined flux in latest and established models = 0.090006 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 99 components and 0.090006 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.078383Jy sigma=1.209555 ! Fit after self-cal, rms=0.078383Jy sigma=1.209524 wmodel J0214-2113_S_a_map.mod ! Writing 99 model components to file: J0214-2113_S_a_map.mod wobs J0214-2113_S_a_uvs.fits ! Writing UV FITS file: J0214-2113_S_a_uvs.fits wwins J0214-2113_S_a_map.win ! wwins: Wrote 1 windows to J0214-2113_S_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000186188 Jy ! Component: 100 - total flux cleaned = -0.000500979 Jy ! Component: 150 - total flux cleaned = -0.00066183 Jy ! Component: 200 - total flux cleaned = -0.000601312 Jy ! Component: 250 - total flux cleaned = -0.000489095 Jy ! Component: 300 - total flux cleaned = -0.00030241 Jy ! Component: 350 - total flux cleaned = -0.000173729 Jy ! Component: 400 - total flux cleaned = -2.42637e-05 Jy ! Component: 450 - total flux cleaned = 9.59064e-05 Jy ! Component: 500 - total flux cleaned = 0.000166202 Jy ! Component: 550 - total flux cleaned = 0.000235362 Jy ! Component: 600 - total flux cleaned = 0.000324137 Jy ! Component: 650 - total flux cleaned = 0.000411098 Jy ! Component: 700 - total flux cleaned = 0.00056009 Jy ! Component: 750 - total flux cleaned = 0.000664118 Jy ! Component: 800 - total flux cleaned = 0.000786687 Jy ! Component: 850 - total flux cleaned = 0.000906751 Jy ! Component: 900 - total flux cleaned = 0.000946081 Jy ! Component: 950 - total flux cleaned = 0.00106126 Jy ! Component: 1000 - total flux cleaned = 0.00108008 Jy ! Component: 1050 - total flux cleaned = 0.00115502 Jy ! Component: 1100 - total flux cleaned = 0.00124671 Jy ! Component: 1150 - total flux cleaned = 0.00130084 Jy ! Component: 1200 - total flux cleaned = 0.00138938 Jy ! Component: 1250 - total flux cleaned = 0.00140702 Jy ! Component: 1300 - total flux cleaned = 0.00147602 Jy ! Component: 1350 - total flux cleaned = 0.00147655 Jy ! Component: 1400 - total flux cleaned = 0.00157669 Jy ! Component: 1450 - total flux cleaned = 0.00159325 Jy ! Component: 1500 - total flux cleaned = 0.00164183 Jy ! Component: 1550 - total flux cleaned = 0.00168975 Jy ! Component: 1600 - total flux cleaned = 0.00168992 Jy ! Component: 1650 - total flux cleaned = 0.00173659 Jy ! Component: 1700 - total flux cleaned = 0.00179792 Jy ! Component: 1750 - total flux cleaned = 0.00185843 Jy ! Component: 1800 - total flux cleaned = 0.00187324 Jy ! Component: 1850 - total flux cleaned = 0.00196177 Jy ! Component: 1900 - total flux cleaned = 0.00200557 Jy ! Component: 1950 - total flux cleaned = 0.0020922 Jy ! Component: 2000 - total flux cleaned = 0.00217799 Jy ! Component: 2050 - total flux cleaned = 0.00230509 Jy ! Component: 2100 - total flux cleaned = 0.00233279 Jy ! Component: 2150 - total flux cleaned = 0.00244359 Jy ! Component: 2200 - total flux cleaned = 0.00252574 Jy ! Component: 2250 - total flux cleaned = 0.00256619 Jy ! Component: 2300 - total flux cleaned = 0.00257959 Jy ! Component: 2350 - total flux cleaned = 0.002633 Jy ! Component: 2400 - total flux cleaned = 0.00268595 Jy ! Component: 2450 - total flux cleaned = 0.00276449 Jy ! Component: 2500 - total flux cleaned = 0.00280336 Jy ! Component: 2550 - total flux cleaned = 0.00286746 Jy ! Component: 2600 - total flux cleaned = 0.00289259 Jy ! Component: 2650 - total flux cleaned = 0.0028799 Jy ! Component: 2700 - total flux cleaned = 0.00286746 Jy ! Component: 2750 - total flux cleaned = 0.00291708 Jy ! Component: 2800 - total flux cleaned = 0.00295379 Jy ! Component: 2850 - total flux cleaned = 0.00294144 Jy ! Component: 2900 - total flux cleaned = 0.00300173 Jy ! Component: 2950 - total flux cleaned = 0.0030255 Jy ! Component: 3000 - total flux cleaned = 0.00307303 Jy ! Component: 3050 - total flux cleaned = 0.00309658 Jy ! Component: 3100 - total flux cleaned = 0.0031551 Jy ! Component: 3150 - total flux cleaned = 0.00314335 Jy ! Component: 3200 - total flux cleaned = 0.00321261 Jy ! Component: 3250 - total flux cleaned = 0.00322415 Jy ! Component: 3300 - total flux cleaned = 0.00326964 Jy ! Component: 3350 - total flux cleaned = 0.00328086 Jy ! Component: 3400 - total flux cleaned = 0.00328097 Jy ! Component: 3450 - total flux cleaned = 0.00329223 Jy ! Component: 3500 - total flux cleaned = 0.0033144 Jy ! Component: 3550 - total flux cleaned = 0.00334751 Jy ! Component: 3600 - total flux cleaned = 0.00333654 Jy ! Component: 3650 - total flux cleaned = 0.00336925 Jy ! Component: 3700 - total flux cleaned = 0.0033692 Jy ! Component: 3750 - total flux cleaned = 0.00341225 Jy ! Component: 3800 - total flux cleaned = 0.00341231 Jy ! Component: 3850 - total flux cleaned = 0.00346554 Jy ! Component: 3900 - total flux cleaned = 0.00345494 Jy ! Component: 3950 - total flux cleaned = 0.00346546 Jy ! Component: 4000 - total flux cleaned = 0.00345494 Jy ! Component: 4050 - total flux cleaned = 0.00349674 Jy ! Total flux subtracted in 4096 components = 0.00347598 Jy ! Clean residual min=-0.000753 max=0.000634 Jy/beam ! Clean residual mean=-0.000000 rms=0.000204 Jy/beam ! Combined flux in latest and established models = 0.0934819 Jy keep ! Adding 307 model components to the UV plane model. ! The established model now contains 406 components and 0.093482 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J0214-2113_S_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.525 x 16.04 at -17.92 degrees (North through East) ! Clean map min=-0.0013029 max=0.076504 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J0214-2113_S_a_map.fits wmodel /vlbi/uf001/uvm//J0214-2113_S_a_map.mod ! Writing 406 model components to file: /vlbi/uf001/uvm//J0214-2113_S_a_map.mod wobs /vlbi/uf001/uvm//J0214-2113_S_a_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J0214-2113_S_a_uvs.fits wwins /vlbi/uf001/uvm//J0214-2113_S_a_map.win ! wwins: Wrote 2 windows to /vlbi/uf001/uvm//J0214-2113_S_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0765035 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000198682 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.779111 0.779111 1.55822 3.11644 6.23289 12.4658 24.9315 49.8631 99.7262 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.076 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 385.054 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J0214-2113_S_a_dfm.log closed on Sun Jan 13 20:34:50 2019