! Started logfile: /vlbi/uf001/uva//J0211+1707_X_dfm.log on Sun Jan 13 21:18:27 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J0211+1707_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J0211+1707_X_uva.fits ! AN table 1: 72 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.983951 visibilities/baseline/integration-bin. ! Found source: J0211+1707 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 38256 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0211+1707_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.009925Jy sigma=23.793170 ! Fit after self-cal, rms=0.891760Jy sigma=21.000431 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6949 mas, bmaj=1.612 mas, bpa=-1.387 degrees ! Estimated noise=0.307333 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.079163 Jy ! Component: 100 - total flux cleaned = 0.102957 Jy ! Total flux subtracted in 100 components = 0.102957 Jy ! Clean residual min=-0.005612 max=0.017036 Jy/beam ! Clean residual mean=-0.000005 rms=0.001328 Jy/beam ! Combined flux in latest and established models = 0.102957 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.102957 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063902Jy sigma=1.453544 ! Fit after self-cal, rms=0.063702Jy sigma=1.449786 ! Inverting map ! Added new window around map position (0.8, -0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0171627 Jy ! Component: 100 - total flux cleaned = 0.0266399 Jy ! Total flux subtracted in 100 components = 0.0266399 Jy ! Clean residual min=-0.004192 max=0.005688 Jy/beam ! Clean residual mean=-0.000005 rms=0.000927 Jy/beam ! Combined flux in latest and established models = 0.129596 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 11 components and 0.129596 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057648Jy sigma=1.303789 ! Fit after self-cal, rms=0.057350Jy sigma=1.297547 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00680078 Jy ! Component: 100 - total flux cleaned = 0.0104771 Jy ! Total flux subtracted in 100 components = 0.0104771 Jy ! Clean residual min=-0.003467 max=0.004973 Jy/beam ! Clean residual mean=-0.000005 rms=0.000824 Jy/beam ! Combined flux in latest and established models = 0.140074 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 20 components and 0.140074 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056176Jy sigma=1.270812 ! Fit after self-cal, rms=0.056098Jy sigma=1.269311 ! Inverting map ! Added new window around map position (9.8, -10.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00493017 Jy ! Component: 100 - total flux cleaned = 0.00812521 Jy ! Total flux subtracted in 100 components = 0.00812521 Jy ! Clean residual min=-0.003290 max=0.004202 Jy/beam ! Clean residual mean=-0.000004 rms=0.000765 Jy/beam ! Combined flux in latest and established models = 0.148199 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 38 components and 0.148199 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055386Jy sigma=1.251890 ! Fit after self-cal, rms=0.055341Jy sigma=1.250942 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8922 mas, bmaj=1.917 mas, bpa=-1.743 degrees ! Estimated noise=0.155055 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00502076 Jy ! Component: 100 - total flux cleaned = 0.00857105 Jy ! Component: 150 - total flux cleaned = 0.0113299 Jy ! Component: 200 - total flux cleaned = 0.0135199 Jy ! Total flux subtracted in 200 components = 0.0135199 Jy ! Clean residual min=-0.003012 max=0.004724 Jy/beam ! Clean residual mean=-0.000010 rms=0.000885 Jy/beam ! Combined flux in latest and established models = 0.161719 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 63 components and 0.161719 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054730Jy sigma=1.236279 ! Fit after self-cal, rms=0.054675Jy sigma=1.235065 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8922 x 1.917 at -1.743 degrees (North through East) ! Clean map min=-0.0029512 max=0.10405 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.03 HN 0.92 KP 1.03 ! LA 0.94 MK 1.00 NL 1.20 OV 0.95 ! PT 0.88 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.02 HN 0.93 KP 1.02 ! LA 0.93 MK 1.00 NL 1.18 OV 0.96 ! PT 0.90 SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.06 HN 0.90 KP 1.05 ! LA 0.94 MK 1.06 NL 1.17 OV 0.93 ! PT 0.88 SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.04 HN 0.88 KP 1.07 ! LA 0.93 MK 1.03 NL 1.18 OV 0.94 ! PT 0.89 SC 1.01 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.04 HN 0.88 KP 1.04 ! LA 0.95 MK 0.99 NL 1.21 OV 0.92 ! PT 0.90 SC 1.00 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.01 HN 0.89 KP 1.02 ! LA 0.96 MK 1.01 NL 1.20 OV 0.93 ! PT 0.90 SC 1.01 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.03 HN 0.90 KP 1.07 ! LA 0.92 MK 1.00 NL 1.19 OV 0.92 ! PT 0.89 SC 0.97 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.03 HN 0.89 KP 1.06 ! LA 0.92 MK 1.01 NL 1.19 OV 0.94 ! PT 0.91 SC 1.01 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.04 HN 0.90 KP 1.04 ! LA 0.94 MK 1.01 NL 1.16 OV 0.95 ! PT 0.88 SC 1.00 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.06 HN 0.88 KP 1.04 ! LA 0.94 MK 1.05 NL 1.17 OV 0.95 ! PT 0.89 SC 0.95 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.02 HN 0.94 KP 1.06 ! LA 0.97 MK 1.05 NL 1.18 OV 0.93 ! PT 0.89 SC 0.97 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.04 HN 0.89 KP 1.03 ! LA 0.94 MK 1.05 NL 1.17 OV 0.94 ! PT 0.90 SC 1.02 ! ! ! Fit before self-cal, rms=0.054675Jy sigma=1.235065 ! Fit after self-cal, rms=0.052143Jy sigma=1.194635 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8924 mas, bmaj=1.932 mas, bpa=-1.618 degrees ! Estimated noise=0.153512 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3, -3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00337722 Jy ! Component: 100 - total flux cleaned = 0.00492126 Jy ! Component: 150 - total flux cleaned = 0.00587145 Jy ! Component: 200 - total flux cleaned = 0.00667618 Jy ! Total flux subtracted in 200 components = 0.00667618 Jy ! Clean residual min=-0.001848 max=0.002108 Jy/beam ! Clean residual mean=-0.000005 rms=0.000439 Jy/beam ! Combined flux in latest and established models = 0.168395 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 89 components and 0.168395 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051908Jy sigma=1.188401 ! Fit after self-cal, rms=0.051916Jy sigma=1.187500 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051916Jy sigma=1.187500 ! Fit after self-cal, rms=0.051925Jy sigma=1.182470 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8919 mas, bmaj=1.929 mas, bpa=-1.777 degrees ! Estimated noise=0.15349 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00140129 Jy ! Component: 100 - total flux cleaned = 0.00216578 Jy ! Component: 150 - total flux cleaned = 0.00268254 Jy ! Component: 200 - total flux cleaned = 0.00305739 Jy ! Total flux subtracted in 200 components = 0.00305739 Jy ! Clean residual min=-0.001283 max=0.001769 Jy/beam ! Clean residual mean=-0.000003 rms=0.000368 Jy/beam ! Combined flux in latest and established models = 0.171452 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 109 components and 0.171452 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051862Jy sigma=1.180749 ! Fit after self-cal, rms=0.051863Jy sigma=1.180585 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (25.4, -18.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00164551 Jy ! Component: 100 - total flux cleaned = 0.00235652 Jy ! Component: 150 - total flux cleaned = 0.00292487 Jy ! Component: 200 - total flux cleaned = 0.0033068 Jy ! Total flux subtracted in 200 components = 0.0033068 Jy ! Clean residual min=-0.001319 max=0.001598 Jy/beam ! Clean residual mean=-0.000003 rms=0.000338 Jy/beam ! Combined flux in latest and established models = 0.174759 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 130 components and 0.174759 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051802Jy sigma=1.178967 ! Fit after self-cal, rms=0.051793Jy sigma=1.178823 ! Inverting map ! Added new window around map position (21.4, -19.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00167661 Jy ! Component: 100 - total flux cleaned = 0.00251336 Jy ! Component: 150 - total flux cleaned = 0.00296512 Jy ! Component: 200 - total flux cleaned = 0.00337265 Jy ! Total flux subtracted in 200 components = 0.00337265 Jy ! Clean residual min=-0.001178 max=0.001540 Jy/beam ! Clean residual mean=-0.000003 rms=0.000305 Jy/beam ! Combined flux in latest and established models = 0.178132 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 152 components and 0.178132 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051727Jy sigma=1.177225 ! Fit after self-cal, rms=0.051721Jy sigma=1.177115 ! Inverting map ! Added new window around map position (5.6, -7.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00138923 Jy ! Component: 100 - total flux cleaned = 0.001666 Jy ! Component: 150 - total flux cleaned = 0.00193183 Jy ! Component: 200 - total flux cleaned = 0.00223185 Jy ! Total flux subtracted in 200 components = 0.00223185 Jy ! Clean residual min=-0.001178 max=0.001339 Jy/beam ! Clean residual mean=-0.000002 rms=0.000279 Jy/beam ! Combined flux in latest and established models = 0.180364 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 170 components and 0.180363 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051664Jy sigma=1.175779 ! Fit after self-cal, rms=0.051661Jy sigma=1.175720 ! Inverting map ! Added new window around map position (8.4, -10). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00111813 Jy ! Component: 100 - total flux cleaned = 0.00145493 Jy ! Component: 150 - total flux cleaned = 0.00167472 Jy ! Component: 200 - total flux cleaned = 0.00192595 Jy ! Total flux subtracted in 200 components = 0.00192595 Jy ! Clean residual min=-0.001149 max=0.001154 Jy/beam ! Clean residual mean=-0.000002 rms=0.000259 Jy/beam ! Combined flux in latest and established models = 0.182289 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 189 components and 0.182289 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051622Jy sigma=1.174746 ! Fit after self-cal, rms=0.051618Jy sigma=1.174670 ! Inverting map ! Added new window around map position (-1, 7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000938484 Jy ! Component: 100 - total flux cleaned = 0.00137 Jy ! Component: 150 - total flux cleaned = 0.00173313 Jy ! Component: 200 - total flux cleaned = 0.00198089 Jy ! Total flux subtracted in 200 components = 0.00198089 Jy ! Clean residual min=-0.001065 max=0.001032 Jy/beam ! Clean residual mean=-0.000002 rms=0.000246 Jy/beam ! Combined flux in latest and established models = 0.18427 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 205 components and 0.18427 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051587Jy sigma=1.173983 ! Fit after self-cal, rms=0.051585Jy sigma=1.173956 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051585Jy sigma=1.173956 ! Fit after self-cal, rms=0.051543Jy sigma=1.173369 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8913 mas, bmaj=1.929 mas, bpa=-1.864 degrees ! Estimated noise=0.15338 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000588776 Jy ! Component: 100 - total flux cleaned = 0.00115767 Jy ! Component: 150 - total flux cleaned = 0.00165834 Jy ! Component: 200 - total flux cleaned = 0.00209152 Jy ! Total flux subtracted in 200 components = 0.00209152 Jy ! Clean residual min=-0.000976 max=0.000980 Jy/beam ! Clean residual mean=-0.000001 rms=0.000223 Jy/beam ! Combined flux in latest and established models = 0.186362 Jy selfcal ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 223 components and 0.186362 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051520Jy sigma=1.172797 ! Fit after self-cal, rms=0.051520Jy sigma=1.172769 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (23.6, -19.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000843407 Jy ! Component: 100 - total flux cleaned = 0.00114034 Jy ! Component: 150 - total flux cleaned = 0.00148282 Jy ! Component: 200 - total flux cleaned = 0.00172421 Jy ! Total flux subtracted in 200 components = 0.00172421 Jy ! Clean residual min=-0.000937 max=0.000894 Jy/beam ! Clean residual mean=-0.000001 rms=0.000212 Jy/beam ! Combined flux in latest and established models = 0.188086 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 248 components and 0.188086 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051498Jy sigma=1.172265 ! Fit after self-cal, rms=0.051496Jy sigma=1.172240 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051496Jy sigma=1.172240 ! Fit after self-cal, rms=0.051500Jy sigma=1.172162 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.072 mas, bmaj=2.925 mas, bpa=-3.049 degrees ! Estimated noise=0.19369 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000983727 Jy ! Component: 100 - total flux cleaned = 0.00160307 Jy ! Component: 150 - total flux cleaned = 0.00203672 Jy ! Component: 200 - total flux cleaned = 0.00224629 Jy ! Total flux subtracted in 200 components = 0.00224629 Jy ! Clean residual min=-0.001008 max=0.000940 Jy/beam ! Clean residual mean=-0.000002 rms=0.000260 Jy/beam ! Combined flux in latest and established models = 0.190332 Jy selfcal ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 274 components and 0.190332 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051491Jy sigma=1.171929 ! Fit after self-cal, rms=0.051490Jy sigma=1.171900 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000190545 Jy ! Component: 100 - total flux cleaned = 0.000379691 Jy ! Component: 150 - total flux cleaned = 0.000499984 Jy ! Component: 200 - total flux cleaned = 0.000610847 Jy ! Total flux subtracted in 200 components = 0.000610847 Jy ! Clean residual min=-0.000993 max=0.000878 Jy/beam ! Clean residual mean=-0.000002 rms=0.000247 Jy/beam ! Combined flux in latest and established models = 0.190943 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 292 components and 0.190943 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051486Jy sigma=1.171790 ! Fit after self-cal, rms=0.051485Jy sigma=1.171781 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8911 mas, bmaj=1.929 mas, bpa=-1.899 degrees ! Estimated noise=0.153384 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8911 x 1.929 at -1.899 degrees (North through East) ! Clean map min=-0.00078113 max=0.10299 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6933 mas, bmaj=1.618 mas, bpa=-1.632 degrees ! Estimated noise=0.304599 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0787917 Jy ! Component: 100 - total flux cleaned = 0.107305 Jy ! Component: 150 - total flux cleaned = 0.121516 Jy ! Component: 200 - total flux cleaned = 0.12958 Jy ! Total flux subtracted in 200 components = 0.12958 Jy ! Clean residual min=-0.002538 max=0.004405 Jy/beam ! Clean residual mean=-0.000004 rms=0.000663 Jy/beam ! Combined flux in latest and established models = 0.12958 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.12958 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8911 mas, bmaj=1.929 mas, bpa=-1.899 degrees ! Estimated noise=0.153384 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00932868 Jy ! Component: 100 - total flux cleaned = 0.0157454 Jy ! Component: 150 - total flux cleaned = 0.0206601 Jy ! Component: 200 - total flux cleaned = 0.0245618 Jy ! Total flux subtracted in 200 components = 0.0245618 Jy ! Clean residual min=-0.001745 max=0.002480 Jy/beam ! Clean residual mean=-0.000007 rms=0.000568 Jy/beam ! Combined flux in latest and established models = 0.154142 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 68 components and 0.154142 Jy ! Inverting map ! Added new window around map position (10.8, -11.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00329155 Jy ! Component: 100 - total flux cleaned = 0.0061658 Jy ! Component: 150 - total flux cleaned = 0.00872074 Jy ! Component: 200 - total flux cleaned = 0.0110131 Jy ! Total flux subtracted in 200 components = 0.0110131 Jy ! Clean residual min=-0.001389 max=0.001638 Jy/beam ! Clean residual mean=-0.000005 rms=0.000413 Jy/beam ! Combined flux in latest and established models = 0.165155 Jy ! Adding 71 model components to the UV plane model. ! The established model now contains 120 components and 0.165155 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.072 mas, bmaj=2.925 mas, bpa=-3.049 degrees ! Estimated noise=0.19369 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0039676 Jy ! Component: 100 - total flux cleaned = 0.00713745 Jy ! Component: 150 - total flux cleaned = 0.00976653 Jy ! Component: 200 - total flux cleaned = 0.0119776 Jy ! Total flux subtracted in 200 components = 0.0119776 Jy ! Clean residual min=-0.001521 max=0.001497 Jy/beam ! Clean residual mean=-0.000007 rms=0.000480 Jy/beam ! Combined flux in latest and established models = 0.177133 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00188488 Jy ! Component: 100 - total flux cleaned = 0.00350641 Jy ! Component: 150 - total flux cleaned = 0.0049068 Jy ! Component: 200 - total flux cleaned = 0.00611833 Jy ! Total flux subtracted in 200 components = 0.00611833 Jy ! Clean residual min=-0.001201 max=0.001041 Jy/beam ! Clean residual mean=-0.000005 rms=0.000330 Jy/beam ! Combined flux in latest and established models = 0.183251 Jy ! Adding 151 model components to the UV plane model. ! The established model now contains 247 components and 0.183251 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8911 mas, bmaj=1.929 mas, bpa=-1.899 degrees ! Estimated noise=0.153384 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106637 Jy ! Component: 100 - total flux cleaned = 0.00195634 Jy ! Component: 150 - total flux cleaned = 0.0027546 Jy ! Component: 200 - total flux cleaned = 0.00347703 Jy ! Total flux subtracted in 200 components = 0.00347703 Jy ! Clean residual min=-0.000911 max=0.000978 Jy/beam ! Clean residual mean=-0.000001 rms=0.000207 Jy/beam ! Combined flux in latest and established models = 0.186728 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 279 components and 0.186728 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051510Jy sigma=1.172419 ! Fit after self-cal, rms=0.051485Jy sigma=1.171924 wmodel J0211+1707_X_map.mod ! Writing 279 model components to file: J0211+1707_X_map.mod wobs J0211+1707_X_uvs.fits ! Writing UV FITS file: J0211+1707_X_uvs.fits wwins J0211+1707_X_map.win ! wwins: Wrote 11 windows to J0211+1707_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 1.00479e-06 Jy ! Component: 100 - total flux cleaned = 1.61664e-05 Jy ! Component: 150 - total flux cleaned = 3.05056e-05 Jy ! Component: 200 - total flux cleaned = 8.58464e-05 Jy ! Component: 250 - total flux cleaned = 0.000153501 Jy ! Component: 300 - total flux cleaned = 0.000206067 Jy ! Component: 350 - total flux cleaned = 0.000231782 Jy ! Component: 400 - total flux cleaned = 0.000257187 Jy ! Component: 450 - total flux cleaned = 0.000318866 Jy ! Component: 500 - total flux cleaned = 0.000342965 Jy ! Component: 550 - total flux cleaned = 0.000378643 Jy ! Component: 600 - total flux cleaned = 0.000402092 Jy ! Component: 650 - total flux cleaned = 0.000436595 Jy ! Component: 700 - total flux cleaned = 0.000459153 Jy ! Component: 750 - total flux cleaned = 0.000492816 Jy ! Component: 800 - total flux cleaned = 0.000515028 Jy ! Component: 850 - total flux cleaned = 0.000569311 Jy ! Component: 900 - total flux cleaned = 0.00056925 Jy ! Component: 950 - total flux cleaned = 0.000601171 Jy ! Component: 1000 - total flux cleaned = 0.000632588 Jy ! Component: 1050 - total flux cleaned = 0.000642992 Jy ! Component: 1100 - total flux cleaned = 0.000693715 Jy ! Component: 1150 - total flux cleaned = 0.000673721 Jy ! Component: 1200 - total flux cleaned = 0.000644005 Jy ! Component: 1250 - total flux cleaned = 0.000663852 Jy ! Component: 1300 - total flux cleaned = 0.000654031 Jy ! Component: 1350 - total flux cleaned = 0.000596175 Jy ! Component: 1400 - total flux cleaned = 0.000586719 Jy ! Component: 1450 - total flux cleaned = 0.000615054 Jy ! Component: 1500 - total flux cleaned = 0.000577701 Jy ! Component: 1550 - total flux cleaned = 0.000586995 Jy ! Component: 1600 - total flux cleaned = 0.000568669 Jy ! Component: 1650 - total flux cleaned = 0.00054156 Jy ! Component: 1700 - total flux cleaned = 0.000559825 Jy ! Component: 1750 - total flux cleaned = 0.000541941 Jy ! Component: 1800 - total flux cleaned = 0.000568618 Jy ! Component: 1850 - total flux cleaned = 0.000551168 Jy ! Component: 1900 - total flux cleaned = 0.000551084 Jy ! Component: 1950 - total flux cleaned = 0.000568361 Jy ! Component: 2000 - total flux cleaned = 0.000602455 Jy ! Component: 2050 - total flux cleaned = 0.000568603 Jy ! Component: 2100 - total flux cleaned = 0.00051831 Jy ! Component: 2150 - total flux cleaned = 0.000534947 Jy ! Component: 2200 - total flux cleaned = 0.000559745 Jy ! Component: 2250 - total flux cleaned = 0.000567959 Jy ! Component: 2300 - total flux cleaned = 0.000543377 Jy ! Component: 2350 - total flux cleaned = 0.000567604 Jy ! Component: 2400 - total flux cleaned = 0.000551581 Jy ! Component: 2450 - total flux cleaned = 0.000511828 Jy ! Component: 2500 - total flux cleaned = 0.000527573 Jy ! Component: 2550 - total flux cleaned = 0.000543289 Jy ! Component: 2600 - total flux cleaned = 0.000535596 Jy ! Component: 2650 - total flux cleaned = 0.000558858 Jy ! Component: 2700 - total flux cleaned = 0.000551238 Jy ! Component: 2750 - total flux cleaned = 0.000581844 Jy ! Component: 2800 - total flux cleaned = 0.000581756 Jy ! Component: 2850 - total flux cleaned = 0.000574254 Jy ! Component: 2900 - total flux cleaned = 0.000589101 Jy ! Component: 2950 - total flux cleaned = 0.000596523 Jy ! Component: 3000 - total flux cleaned = 0.000589121 Jy ! Component: 3050 - total flux cleaned = 0.000625694 Jy ! Component: 3100 - total flux cleaned = 0.000611086 Jy ! Component: 3150 - total flux cleaned = 0.000640153 Jy ! Component: 3200 - total flux cleaned = 0.000632974 Jy ! Component: 3250 - total flux cleaned = 0.000640144 Jy ! Component: 3300 - total flux cleaned = 0.000633027 Jy ! Component: 3350 - total flux cleaned = 0.000675305 Jy ! Component: 3400 - total flux cleaned = 0.000654235 Jy ! Component: 3450 - total flux cleaned = 0.000682124 Jy ! Component: 3500 - total flux cleaned = 0.000661326 Jy ! Component: 3550 - total flux cleaned = 0.000654466 Jy ! Component: 3600 - total flux cleaned = 0.000668172 Jy ! Component: 3650 - total flux cleaned = 0.000668191 Jy ! Component: 3700 - total flux cleaned = 0.000681719 Jy ! Component: 3750 - total flux cleaned = 0.000661602 Jy ! Component: 3800 - total flux cleaned = 0.000668307 Jy ! Component: 3850 - total flux cleaned = 0.000674903 Jy ! Component: 3900 - total flux cleaned = 0.000674954 Jy ! Component: 3950 - total flux cleaned = 0.000655172 Jy ! Component: 4000 - total flux cleaned = 0.00067485 Jy ! Component: 4050 - total flux cleaned = 0.000668331 Jy ! Total flux subtracted in 4096 components = 0.000687656 Jy ! Clean residual min=-0.000400 max=0.000418 Jy/beam ! Clean residual mean=-0.000000 rms=0.000114 Jy/beam ! Combined flux in latest and established models = 0.187416 Jy keep ! Adding 316 model components to the UV plane model. ! The established model now contains 594 components and 0.187416 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J0211+1707_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8911 x 1.929 at -1.899 degrees (North through East) ! Clean map min=-0.00061864 max=0.10276 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J0211+1707_X_map.fits wmodel /vlbi/uf001/uva//J0211+1707_X_map.mod ! Writing 594 model components to file: /vlbi/uf001/uva//J0211+1707_X_map.mod wobs /vlbi/uf001/uva//J0211+1707_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J0211+1707_X_uvs.fits wwins /vlbi/uf001/uva//J0211+1707_X_map.win ! wwins: Wrote 12 windows to /vlbi/uf001/uva//J0211+1707_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.10276 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000113732 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.332034 0.332034 0.664068 1.32814 2.65627 5.31254 10.6251 21.2502 42.5003 85.0007 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.102 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 903.522 quit ! Quitting program ! Log file /vlbi/uf001/uva//J0211+1707_X_dfm.log closed on Sun Jan 13 21:18:34 2019