! Started logfile: /vlbi/uf001/uva//J0211+1051_X_dfm.log on Sun Jan 13 21:18:14 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J0211+1051_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J0211+1051_X_uva.fits ! AN table 1: 42 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.958201 visibilities/baseline/integration-bin. ! Found source: J0211+1051 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 21732 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0211+1051_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.045761Jy sigma=22.511546 ! Fit after self-cal, rms=0.707578Jy sigma=15.304461 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.695 mas, bmaj=1.683 mas, bpa=-2.232 degrees ! Estimated noise=0.383199 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.206537 Jy ! Component: 100 - total flux cleaned = 0.271117 Jy ! Total flux subtracted in 100 components = 0.271117 Jy ! Clean residual min=-0.014087 max=0.039717 Jy/beam ! Clean residual mean=-0.000017 rms=0.003180 Jy/beam ! Combined flux in latest and established models = 0.271117 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.271117 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.121457Jy sigma=2.533495 ! Fit after self-cal, rms=0.121175Jy sigma=2.528559 ! Inverting map ! Added new window around map position (1, 0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0422843 Jy ! Component: 100 - total flux cleaned = 0.0680854 Jy ! Total flux subtracted in 100 components = 0.0680854 Jy ! Clean residual min=-0.009487 max=0.017855 Jy/beam ! Clean residual mean=-0.000011 rms=0.002157 Jy/beam ! Combined flux in latest and established models = 0.339202 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 10 components and 0.339202 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.092024Jy sigma=1.917414 ! Fit after self-cal, rms=0.091390Jy sigma=1.903633 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0199581 Jy ! Component: 100 - total flux cleaned = 0.034864 Jy ! Total flux subtracted in 100 components = 0.034864 Jy ! Clean residual min=-0.008328 max=0.014915 Jy/beam ! Clean residual mean=-0.000009 rms=0.001771 Jy/beam ! Combined flux in latest and established models = 0.374066 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 25 components and 0.374066 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080405Jy sigma=1.675791 ! Fit after self-cal, rms=0.080227Jy sigma=1.672015 ! Inverting map ! Added new window around map position (2.2, 1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0151205 Jy ! Component: 100 - total flux cleaned = 0.026543 Jy ! Total flux subtracted in 100 components = 0.026543 Jy ! Clean residual min=-0.007363 max=0.010805 Jy/beam ! Clean residual mean=-0.000007 rms=0.001524 Jy/beam ! Combined flux in latest and established models = 0.400609 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 34 components and 0.400609 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073364Jy sigma=1.527615 ! Fit after self-cal, rms=0.073164Jy sigma=1.523426 ! Inverting map ! Added new window around map position (0.8, 2.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.011566 Jy ! Component: 100 - total flux cleaned = 0.0207006 Jy ! Total flux subtracted in 100 components = 0.0207006 Jy ! Clean residual min=-0.006387 max=0.007270 Jy/beam ! Clean residual mean=-0.000005 rms=0.001350 Jy/beam ! Combined flux in latest and established models = 0.42131 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 53 components and 0.42131 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068744Jy sigma=1.431233 ! Fit after self-cal, rms=0.068657Jy sigma=1.429495 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8716 mas, bmaj=1.931 mas, bpa=-2.023 degrees ! Estimated noise=0.243741 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0169202 Jy ! Component: 100 - total flux cleaned = 0.0290393 Jy ! Component: 150 - total flux cleaned = 0.038366 Jy ! Component: 200 - total flux cleaned = 0.0457196 Jy ! Total flux subtracted in 200 components = 0.0457196 Jy ! Clean residual min=-0.007257 max=0.008859 Jy/beam ! Clean residual mean=-0.000014 rms=0.001590 Jy/beam ! Combined flux in latest and established models = 0.467029 Jy ! Performing phase self-cal ! Adding 66 model components to the UV plane model. ! The established model now contains 96 components and 0.467029 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062637Jy sigma=1.305336 ! Fit after self-cal, rms=0.062442Jy sigma=1.300741 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8716 x 1.931 at -2.023 degrees (North through East) ! Clean map min=-0.0069263 max=0.28872 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.98 HN 0.93 KP 1.06 ! LA 0.99 MK 1.02 NL 1.10 OV 0.92 ! PT 0.91 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.98 HN 0.96 KP 1.05 ! LA 1.00 MK 1.00 NL 1.08 OV 0.93 ! PT 0.91 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.99 HN 0.96 KP 1.05 ! LA 0.99 MK 1.03 NL 1.09 OV 0.92 ! PT 0.90 SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.99 HN 0.96 KP 1.08 ! LA 0.97 MK 1.02 NL 1.08 OV 0.91 ! PT 0.92 SC 1.00 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00 HN 0.94 KP 1.06 ! LA 0.98 MK 1.02 NL 1.13 OV 0.91 ! PT 0.91 SC 0.98 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.98 HN 0.94 KP 1.05 ! LA 0.99 MK 1.02 NL 1.08 OV 0.91 ! PT 0.90 SC 0.98 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00 HN 0.95 KP 1.08 ! LA 0.98 MK 1.02 NL 1.09 OV 0.91 ! PT 0.90 SC 0.99 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.99 HN 0.96 KP 1.04 ! LA 0.98 MK 1.03 NL 1.11 OV 0.91 ! PT 0.91 SC 0.98 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.99 HN 0.96 KP 1.07 ! LA 0.98 MK 1.02 NL 1.10 OV 0.92 ! PT 0.90 SC 1.01 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.01 HN 0.96 KP 1.05 ! LA 0.99 MK 1.03 NL 1.08 OV 0.91 ! PT 0.91 SC 0.99 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00 HN 0.96 KP 1.07 ! LA 0.98 MK 1.02 NL 1.10 OV 0.92 ! PT 0.91 SC 1.00 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00 HN 0.97 KP 1.06 ! LA 0.97 MK 1.04 NL 1.10 OV 0.92 ! PT 0.91 SC 0.99 ! ! ! Fit before self-cal, rms=0.062442Jy sigma=1.300741 ! Fit after self-cal, rms=0.055499Jy sigma=1.158929 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8739 mas, bmaj=1.949 mas, bpa=-1.743 degrees ! Estimated noise=0.241725 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.4, 1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00275471 Jy ! Component: 100 - total flux cleaned = 0.00380634 Jy ! Component: 150 - total flux cleaned = 0.00431839 Jy ! Component: 200 - total flux cleaned = 0.00440721 Jy ! Total flux subtracted in 200 components = 0.00440721 Jy ! Clean residual min=-0.002590 max=0.002775 Jy/beam ! Clean residual mean=-0.000002 rms=0.000622 Jy/beam ! Combined flux in latest and established models = 0.471437 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 117 components and 0.471437 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054923Jy sigma=1.146543 ! Fit after self-cal, rms=0.054891Jy sigma=1.145244 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054891Jy sigma=1.145244 ! Fit after self-cal, rms=0.054332Jy sigma=1.129573 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8714 mas, bmaj=1.946 mas, bpa=-1.882 degrees ! Estimated noise=0.242106 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000624411 Jy ! Component: 100 - total flux cleaned = 0.00110656 Jy ! Component: 150 - total flux cleaned = 0.00145086 Jy ! Component: 200 - total flux cleaned = 0.00169075 Jy ! Total flux subtracted in 200 components = 0.00169075 Jy ! Clean residual min=-0.001932 max=0.002337 Jy/beam ! Clean residual mean=-0.000002 rms=0.000424 Jy/beam ! Combined flux in latest and established models = 0.473127 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 143 components and 0.473127 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054126Jy sigma=1.125212 ! Fit after self-cal, rms=0.054110Jy sigma=1.124883 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5.6, 2.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00158223 Jy ! Component: 100 - total flux cleaned = 0.00214592 Jy ! Component: 150 - total flux cleaned = 0.00252125 Jy ! Component: 200 - total flux cleaned = 0.00276322 Jy ! Total flux subtracted in 200 components = 0.00276322 Jy ! Clean residual min=-0.001748 max=0.001868 Jy/beam ! Clean residual mean=-0.000002 rms=0.000389 Jy/beam ! Combined flux in latest and established models = 0.475891 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 161 components and 0.47589 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053972Jy sigma=1.122072 ! Fit after self-cal, rms=0.053961Jy sigma=1.121924 ! Inverting map ! Added new window around map position (-7, 16.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0012333 Jy ! Component: 100 - total flux cleaned = 0.00175882 Jy ! Component: 150 - total flux cleaned = 0.00197566 Jy ! Component: 200 - total flux cleaned = 0.00217677 Jy ! Total flux subtracted in 200 components = 0.00217677 Jy ! Clean residual min=-0.001585 max=0.001677 Jy/beam ! Clean residual mean=-0.000002 rms=0.000367 Jy/beam ! Combined flux in latest and established models = 0.478067 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 177 components and 0.478067 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053877Jy sigma=1.120159 ! Fit after self-cal, rms=0.053870Jy sigma=1.120078 ! Inverting map ! Added new window around map position (0.8, -27.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00091405 Jy ! Component: 100 - total flux cleaned = 0.00133132 Jy ! Component: 150 - total flux cleaned = 0.00166994 Jy ! Component: 200 - total flux cleaned = 0.00194682 Jy ! Total flux subtracted in 200 components = 0.00194682 Jy ! Clean residual min=-0.001551 max=0.001572 Jy/beam ! Clean residual mean=-0.000001 rms=0.000351 Jy/beam ! Combined flux in latest and established models = 0.480014 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 191 components and 0.480014 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053802Jy sigma=1.118741 ! Fit after self-cal, rms=0.053797Jy sigma=1.118671 ! Inverting map ! Added new window around map position (5.8, -21.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000893296 Jy ! Component: 100 - total flux cleaned = 0.00124133 Jy ! Component: 150 - total flux cleaned = 0.00169229 Jy ! Component: 200 - total flux cleaned = 0.00198603 Jy ! Total flux subtracted in 200 components = 0.00198603 Jy ! Clean residual min=-0.001477 max=0.001359 Jy/beam ! Clean residual mean=-0.000002 rms=0.000336 Jy/beam ! Combined flux in latest and established models = 0.482 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 214 components and 0.482 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053740Jy sigma=1.117545 ! Fit after self-cal, rms=0.053737Jy sigma=1.117512 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053737Jy sigma=1.117512 ! Fit after self-cal, rms=0.053676Jy sigma=1.116774 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8706 mas, bmaj=1.945 mas, bpa=-1.819 degrees ! Estimated noise=0.242049 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.89556e-05 Jy ! Component: 100 - total flux cleaned = 0.000284339 Jy ! Component: 150 - total flux cleaned = 0.00062466 Jy ! Component: 200 - total flux cleaned = 0.000936356 Jy ! Total flux subtracted in 200 components = 0.000936356 Jy ! Clean residual min=-0.001390 max=0.001279 Jy/beam ! Clean residual mean=-0.000002 rms=0.000311 Jy/beam ! Combined flux in latest and established models = 0.482937 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 227 components and 0.482937 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053631Jy sigma=1.115843 ! Fit after self-cal, rms=0.053628Jy sigma=1.115801 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000185768 Jy ! Component: 100 - total flux cleaned = 0.000445058 Jy ! Component: 150 - total flux cleaned = 0.000635972 Jy ! Component: 200 - total flux cleaned = 0.000843415 Jy ! Total flux subtracted in 200 components = 0.000843415 Jy ! Clean residual min=-0.001342 max=0.001255 Jy/beam ! Clean residual mean=-0.000002 rms=0.000304 Jy/beam ! Combined flux in latest and established models = 0.48378 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 232 components and 0.48378 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053601Jy sigma=1.115246 ! Fit after self-cal, rms=0.053599Jy sigma=1.115222 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053599Jy sigma=1.115222 ! Fit after self-cal, rms=0.053581Jy sigma=1.115109 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.043 mas, bmaj=3.005 mas, bpa=-4.517 degrees ! Estimated noise=0.317359 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000593708 Jy ! Component: 100 - total flux cleaned = 0.000428927 Jy ! Component: 150 - total flux cleaned = 0.000430862 Jy ! Component: 200 - total flux cleaned = 0.000457989 Jy ! Total flux subtracted in 200 components = 0.000457989 Jy ! Clean residual min=-0.001434 max=0.001390 Jy/beam ! Clean residual mean=-0.000005 rms=0.000365 Jy/beam ! Combined flux in latest and established models = 0.484238 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 251 components and 0.484238 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053568Jy sigma=1.114791 ! Fit after self-cal, rms=0.053566Jy sigma=1.114772 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000367606 Jy ! Component: 100 - total flux cleaned = 0.000411289 Jy ! Component: 150 - total flux cleaned = 0.000451431 Jy ! Component: 200 - total flux cleaned = 0.00047045 Jy ! Total flux subtracted in 200 components = 0.00047045 Jy ! Clean residual min=-0.001402 max=0.001363 Jy/beam ! Clean residual mean=-0.000005 rms=0.000355 Jy/beam ! Combined flux in latest and established models = 0.484708 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 265 components and 0.484708 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053561Jy sigma=1.114656 ! Fit after self-cal, rms=0.053560Jy sigma=1.114644 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8701 mas, bmaj=1.944 mas, bpa=-1.803 degrees ! Estimated noise=0.242036 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8701 x 1.944 at -1.803 degrees (North through East) ! Clean map min=-0.0013671 max=0.28468 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6929 mas, bmaj=1.69 mas, bpa=-2.011 degrees ! Estimated noise=0.380841 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.204709 Jy ! Component: 100 - total flux cleaned = 0.276335 Jy ! Component: 150 - total flux cleaned = 0.3181 Jy ! Component: 200 - total flux cleaned = 0.345383 Jy ! Total flux subtracted in 200 components = 0.345383 Jy ! Clean residual min=-0.006627 max=0.015213 Jy/beam ! Clean residual mean=-0.000011 rms=0.001639 Jy/beam ! Combined flux in latest and established models = 0.345383 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.345383 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8701 mas, bmaj=1.944 mas, bpa=-1.803 degrees ! Estimated noise=0.242036 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0351374 Jy ! Component: 100 - total flux cleaned = 0.0580071 Jy ! Component: 150 - total flux cleaned = 0.0741497 Jy ! Component: 200 - total flux cleaned = 0.0859246 Jy ! Total flux subtracted in 200 components = 0.0859246 Jy ! Clean residual min=-0.003130 max=0.006710 Jy/beam ! Clean residual mean=-0.000014 rms=0.001040 Jy/beam ! Combined flux in latest and established models = 0.431307 Jy ! Adding 61 model components to the UV plane model. ! The established model now contains 64 components and 0.431307 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0087797 Jy ! Component: 100 - total flux cleaned = 0.0154999 Jy ! Component: 150 - total flux cleaned = 0.0207382 Jy ! Component: 200 - total flux cleaned = 0.0249498 Jy ! Total flux subtracted in 200 components = 0.0249498 Jy ! Clean residual min=-0.001917 max=0.002632 Jy/beam ! Clean residual mean=-0.000007 rms=0.000553 Jy/beam ! Combined flux in latest and established models = 0.456257 Jy ! Adding 71 model components to the UV plane model. ! The established model now contains 123 components and 0.456257 Jy ! Inverting map ! Added new window around map position (4, 5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0035008 Jy ! Component: 100 - total flux cleaned = 0.00643007 Jy ! Component: 150 - total flux cleaned = 0.00892542 Jy ! Component: 200 - total flux cleaned = 0.0110797 Jy ! Total flux subtracted in 200 components = 0.0110797 Jy ! Clean residual min=-0.001596 max=0.001957 Jy/beam ! Clean residual mean=-0.000004 rms=0.000402 Jy/beam ! Combined flux in latest and established models = 0.467337 Jy ! Adding 66 model components to the UV plane model. ! The established model now contains 169 components and 0.467337 Jy ! Inverting map ! Added new window around map position (-13, -34.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00205263 Jy ! Component: 100 - total flux cleaned = 0.00377038 Jy ! Component: 150 - total flux cleaned = 0.00519359 Jy ! Component: 200 - total flux cleaned = 0.00649225 Jy ! Total flux subtracted in 200 components = 0.00649225 Jy ! Clean residual min=-0.001401 max=0.001445 Jy/beam ! Clean residual mean=-0.000003 rms=0.000342 Jy/beam ! Combined flux in latest and established models = 0.473829 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 201 components and 0.473829 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.043 mas, bmaj=3.005 mas, bpa=-4.517 degrees ! Estimated noise=0.317359 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00241072 Jy ! Component: 100 - total flux cleaned = 0.00417898 Jy ! Component: 150 - total flux cleaned = 0.00555408 Jy ! Component: 200 - total flux cleaned = 0.00658587 Jy ! Total flux subtracted in 200 components = 0.00658587 Jy ! Clean residual min=-0.001496 max=0.001431 Jy/beam ! Clean residual mean=-0.000005 rms=0.000401 Jy/beam ! Combined flux in latest and established models = 0.480415 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000907248 Jy ! Component: 100 - total flux cleaned = 0.00163921 Jy ! Component: 150 - total flux cleaned = 0.00209648 Jy ! Component: 200 - total flux cleaned = 0.00258443 Jy ! Total flux subtracted in 200 components = 0.00258443 Jy ! Clean residual min=-0.001350 max=0.001381 Jy/beam ! Clean residual mean=-0.000005 rms=0.000365 Jy/beam ! Combined flux in latest and established models = 0.482999 Jy ! Adding 91 model components to the UV plane model. ! The established model now contains 276 components and 0.482999 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8701 mas, bmaj=1.944 mas, bpa=-1.803 degrees ! Estimated noise=0.242036 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00051206 Jy ! Component: 100 - total flux cleaned = 0.000741717 Jy ! Component: 150 - total flux cleaned = 0.000943896 Jy ! Component: 200 - total flux cleaned = 0.0012051 Jy ! Total flux subtracted in 200 components = 0.0012051 Jy ! Clean residual min=-0.001220 max=0.001379 Jy/beam ! Clean residual mean=-0.000002 rms=0.000282 Jy/beam ! Combined flux in latest and established models = 0.484204 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 303 components and 0.484204 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053522Jy sigma=1.113919 ! Fit after self-cal, rms=0.053502Jy sigma=1.113440 wmodel J0211+1051_X_map.mod ! Writing 303 model components to file: J0211+1051_X_map.mod wobs J0211+1051_X_uvs.fits ! Writing UV FITS file: J0211+1051_X_uvs.fits wwins J0211+1051_X_map.win ! wwins: Wrote 11 windows to J0211+1051_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000176224 Jy ! Component: 100 - total flux cleaned = 0.000217504 Jy ! Component: 150 - total flux cleaned = 0.000217596 Jy ! Component: 200 - total flux cleaned = 0.000293013 Jy ! Component: 250 - total flux cleaned = 0.000293034 Jy ! Component: 300 - total flux cleaned = 0.000239404 Jy ! Component: 350 - total flux cleaned = 0.000186987 Jy ! Component: 400 - total flux cleaned = 0.00010141 Jy ! Component: 450 - total flux cleaned = 6.83011e-05 Jy ! Component: 500 - total flux cleaned = 0.00010164 Jy ! Component: 550 - total flux cleaned = 6.90722e-05 Jy ! Component: 600 - total flux cleaned = 3.70293e-05 Jy ! Component: 650 - total flux cleaned = 2.12297e-05 Jy ! Component: 700 - total flux cleaned = -1.02638e-05 Jy ! Component: 750 - total flux cleaned = -1.04178e-05 Jy ! Component: 800 - total flux cleaned = -7.16166e-05 Jy ! Component: 850 - total flux cleaned = -4.11849e-05 Jy ! Component: 900 - total flux cleaned = -5.63588e-05 Jy ! Component: 950 - total flux cleaned = -0.000100828 Jy ! Component: 1000 - total flux cleaned = -0.000115221 Jy ! Component: 1050 - total flux cleaned = -0.000158603 Jy ! Component: 1100 - total flux cleaned = -0.00017279 Jy ! Component: 1150 - total flux cleaned = -0.000201064 Jy ! Component: 1200 - total flux cleaned = -0.000257054 Jy ! Component: 1250 - total flux cleaned = -0.000229263 Jy ! Component: 1300 - total flux cleaned = -0.000243088 Jy ! Component: 1350 - total flux cleaned = -0.000256689 Jy ! Component: 1400 - total flux cleaned = -0.000283623 Jy ! Component: 1450 - total flux cleaned = -0.000270229 Jy ! Component: 1500 - total flux cleaned = -0.000283458 Jy ! Component: 1550 - total flux cleaned = -0.000283403 Jy ! Component: 1600 - total flux cleaned = -0.000309471 Jy ! Component: 1650 - total flux cleaned = -0.000283498 Jy ! Component: 1700 - total flux cleaned = -0.000296376 Jy ! Component: 1750 - total flux cleaned = -0.000245424 Jy ! Component: 1800 - total flux cleaned = -0.000283384 Jy ! Component: 1850 - total flux cleaned = -0.000233088 Jy ! Component: 1900 - total flux cleaned = -0.000245803 Jy ! Component: 1950 - total flux cleaned = -0.00025823 Jy ! Component: 2000 - total flux cleaned = -0.000319572 Jy ! Component: 2050 - total flux cleaned = -0.000270727 Jy ! Component: 2100 - total flux cleaned = -0.000282841 Jy ! Component: 2150 - total flux cleaned = -0.000306874 Jy ! Component: 2200 - total flux cleaned = -0.000294975 Jy ! Component: 2250 - total flux cleaned = -0.000306872 Jy ! Component: 2300 - total flux cleaned = -0.00027157 Jy ! Component: 2350 - total flux cleaned = -0.000271726 Jy ! Component: 2400 - total flux cleaned = -0.000306486 Jy ! Component: 2450 - total flux cleaned = -0.000294678 Jy ! Component: 2500 - total flux cleaned = -0.000294809 Jy ! Component: 2550 - total flux cleaned = -0.000317603 Jy ! Component: 2600 - total flux cleaned = -0.000317545 Jy ! Component: 2650 - total flux cleaned = -0.000340012 Jy ! Component: 2700 - total flux cleaned = -0.000328692 Jy ! Component: 2750 - total flux cleaned = -0.000350962 Jy ! Component: 2800 - total flux cleaned = -0.000361962 Jy ! Component: 2850 - total flux cleaned = -0.000372927 Jy ! Component: 2900 - total flux cleaned = -0.000405745 Jy ! Component: 2950 - total flux cleaned = -0.000383903 Jy ! Component: 3000 - total flux cleaned = -0.000394626 Jy ! Component: 3050 - total flux cleaned = -0.000405337 Jy ! Component: 3100 - total flux cleaned = -0.000426723 Jy ! Component: 3150 - total flux cleaned = -0.000373749 Jy ! Component: 3200 - total flux cleaned = -0.000394782 Jy ! Component: 3250 - total flux cleaned = -0.000447357 Jy ! Component: 3300 - total flux cleaned = -0.000457786 Jy ! Component: 3350 - total flux cleaned = -0.00044731 Jy ! Component: 3400 - total flux cleaned = -0.000468038 Jy ! Component: 3450 - total flux cleaned = -0.000437281 Jy ! Component: 3500 - total flux cleaned = -0.000457693 Jy ! Component: 3550 - total flux cleaned = -0.000549178 Jy ! Component: 3600 - total flux cleaned = -0.000498651 Jy ! Component: 3650 - total flux cleaned = -0.000498786 Jy ! Component: 3700 - total flux cleaned = -0.000528829 Jy ! Component: 3750 - total flux cleaned = -0.000528799 Jy ! Component: 3800 - total flux cleaned = -0.000568348 Jy ! Component: 3850 - total flux cleaned = -0.000558503 Jy ! Component: 3900 - total flux cleaned = -0.000646818 Jy ! Component: 3950 - total flux cleaned = -0.000656563 Jy ! Component: 4000 - total flux cleaned = -0.000656548 Jy ! Component: 4050 - total flux cleaned = -0.000704839 Jy ! Total flux subtracted in 4096 components = -0.000704884 Jy ! Clean residual min=-0.000843 max=0.000533 Jy/beam ! Clean residual mean=-0.000001 rms=0.000171 Jy/beam ! Combined flux in latest and established models = 0.4835 Jy keep ! Adding 327 model components to the UV plane model. ! The established model now contains 630 components and 0.483499 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J0211+1051_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8701 x 1.944 at -1.803 degrees (North through East) ! Clean map min=-0.0008962 max=0.28477 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J0211+1051_X_map.fits wmodel /vlbi/uf001/uva//J0211+1051_X_map.mod ! Writing 630 model components to file: /vlbi/uf001/uva//J0211+1051_X_map.mod wobs /vlbi/uf001/uva//J0211+1051_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J0211+1051_X_uvs.fits wwins /vlbi/uf001/uva//J0211+1051_X_map.win ! wwins: Wrote 12 windows to /vlbi/uf001/uva//J0211+1051_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.28477 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000170058 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.179154 0.179154 0.358307 0.716615 1.43323 2.86646 5.73292 11.4658 22.9317 45.8633 91.7267 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.284 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1674.54 quit ! Quitting program ! Log file /vlbi/uf001/uva//J0211+1051_X_dfm.log closed on Sun Jan 13 21:18:20 2019