! Started logfile: /vlbi/uf001/uva//J0205+2416_S_dfm.log on Sun Jan 13 21:15:14 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J0205+2416_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0205+2416_S_uva.fits
! AN table 1: 87 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.862835 visibilities/baseline/integration-bin.
! Found source: J0205+2416
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 10134 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0205+2416_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 86 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 86 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 86 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.042174Jy  sigma=22.667050
! Fit after  self-cal, rms=0.813987Jy  sigma=17.809134
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.722 mas, bmaj=5.92 mas, bpa=-6.784 degrees
! Estimated noise=0.475445 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.139319 Jy
! Component: 100  -  total flux cleaned = 0.177268 Jy
! Total flux subtracted in 100 components = 0.177268 Jy
! Clean residual min=-0.013638 max=0.058070 Jy/beam
! Clean residual mean=0.000024 rms=0.004217 Jy/beam
! Combined flux in latest and established models = 0.177268 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.177268 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.101653Jy  sigma=2.081582
! Fit after  self-cal, rms=0.101633Jy  sigma=2.080926
! Inverting map 
! Added new window around map position (9.5, 1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0467433 Jy
! Component: 100  -  total flux cleaned = 0.067362 Jy
! Total flux subtracted in 100 components = 0.067362 Jy
! Clean residual min=-0.008737 max=0.011214 Jy/beam
! Clean residual mean=0.000011 rms=0.002173 Jy/beam
! Combined flux in latest and established models = 0.24463 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 20 components and 0.24463 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075140Jy  sigma=1.513222
! Fit after  self-cal, rms=0.073482Jy  sigma=1.478821
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0156437 Jy
! Component: 100  -  total flux cleaned = 0.026253 Jy
! Total flux subtracted in 100 components = 0.026253 Jy
! Clean residual min=-0.006416 max=0.007842 Jy/beam
! Clean residual mean=0.000005 rms=0.001615 Jy/beam
! Combined flux in latest and established models = 0.270882 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 26 components and 0.270882 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068909Jy  sigma=1.388197
! Fit after  self-cal, rms=0.068813Jy  sigma=1.386260
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.234 mas, bmaj=6.745 mas, bpa=-5.577 degrees
! Estimated noise=0.336927 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00947544 Jy
! Component: 100  -  total flux cleaned = 0.0160065 Jy
! Component: 150  -  total flux cleaned = 0.0208085 Jy
! Component: 200  -  total flux cleaned = 0.0244757 Jy
! Total flux subtracted in 200 components = 0.0244757 Jy
! Clean residual min=-0.006152 max=0.007592 Jy/beam
! Clean residual mean=-0.000003 rms=0.001733 Jy/beam
! Combined flux in latest and established models = 0.295358 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 53 components and 0.295358 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.066936Jy  sigma=1.351727
! Fit after  self-cal, rms=0.066902Jy  sigma=1.350858
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.234 x 6.745 at -5.577 degrees (North through East)
! Clean map  min=-0.0059384  max=0.18593 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.00     HN        0.98     KP        0.99     
!   LA        0.95     MK        0.99     NL        1.06     OV        0.97     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.30     FD        1.13     HN        0.99     KP        1.02     
!   LA        0.96     MK        1.01     NL        1.08     OV        0.81     
!   PT        0.97     SC        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        0.99     HN        0.97     KP        1.01     
!   LA        0.94     MK        1.04     NL        1.07     OV        0.95     
!   PT        0.98     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.066902Jy  sigma=1.350858
! Fit after  self-cal, rms=0.068913Jy  sigma=1.281480
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.234 mas, bmaj=6.809 mas, bpa=-5.408 degrees
! Estimated noise=0.336642 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00232686 Jy
! Component: 100  -  total flux cleaned = 0.00216059 Jy
! Component: 150  -  total flux cleaned = 0.00216968 Jy
! Component: 200  -  total flux cleaned = 0.00223487 Jy
! Total flux subtracted in 200 components = 0.00223487 Jy
! Clean residual min=-0.005991 max=0.004767 Jy/beam
! Clean residual mean=-0.000006 rms=0.001344 Jy/beam
! Combined flux in latest and established models = 0.297593 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 65 components and 0.297593 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068640Jy  sigma=1.277346
! Fit after  self-cal, rms=0.068688Jy  sigma=1.276770
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068688Jy  sigma=1.276770
! Fit after  self-cal, rms=0.062032Jy  sigma=1.187307
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.252 mas, bmaj=6.781 mas, bpa=-5.162 degrees
! Estimated noise=0.337329 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00155323 Jy
! Component: 100  -  total flux cleaned = 0.00145722 Jy
! Component: 150  -  total flux cleaned = 0.00127504 Jy
! Component: 200  -  total flux cleaned = 0.00118902 Jy
! Total flux subtracted in 200 components = 0.00118902 Jy
! Clean residual min=-0.001997 max=0.002283 Jy/beam
! Clean residual mean=0.000006 rms=0.000516 Jy/beam
! Combined flux in latest and established models = 0.298782 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 75 components and 0.298782 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061950Jy  sigma=1.185243
! Fit after  self-cal, rms=0.061990Jy  sigma=1.184961
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-43, 4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000941345 Jy
! Component: 100  -  total flux cleaned = 0.000944661 Jy
! Component: 150  -  total flux cleaned = 0.000825472 Jy
! Component: 200  -  total flux cleaned = 0.000752358 Jy
! Total flux subtracted in 200 components = 0.000752358 Jy
! Clean residual min=-0.001948 max=0.001982 Jy/beam
! Clean residual mean=0.000006 rms=0.000489 Jy/beam
! Combined flux in latest and established models = 0.299534 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 87 components and 0.299534 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061897Jy  sigma=1.183216
! Fit after  self-cal, rms=0.061895Jy  sigma=1.183155
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061895Jy  sigma=1.183155
! Fit after  self-cal, rms=0.061103Jy  sigma=1.178240
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.257 mas, bmaj=6.779 mas, bpa=-5.155 degrees
! Estimated noise=0.336233 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000134491 Jy
! Component: 100  -  total flux cleaned = 1.97911e-05 Jy
! Component: 150  -  total flux cleaned = -1.26969e-05 Jy
! Component: 200  -  total flux cleaned = -6.84202e-05 Jy
! Total flux subtracted in 200 components = -6.84202e-05 Jy
! Clean residual min=-0.001660 max=0.002137 Jy/beam
! Clean residual mean=0.000005 rms=0.000394 Jy/beam
! Combined flux in latest and established models = 0.299466 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 98 components and 0.299466 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061064Jy  sigma=1.177350
! Fit after  self-cal, rms=0.061061Jy  sigma=1.177303
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (4.5, 1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00121633 Jy
! Component: 100  -  total flux cleaned = 0.000835796 Jy
! Component: 150  -  total flux cleaned = 0.000535805 Jy
! Component: 200  -  total flux cleaned = 0.000321507 Jy
! Total flux subtracted in 200 components = 0.000321507 Jy
! Clean residual min=-0.001621 max=0.001411 Jy/beam
! Clean residual mean=0.000005 rms=0.000366 Jy/beam
! Combined flux in latest and established models = 0.299788 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 114 components and 0.299788 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061003Jy  sigma=1.175864
! Fit after  self-cal, rms=0.061002Jy  sigma=1.175788
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061002Jy  sigma=1.175788
! Fit after  self-cal, rms=0.060941Jy  sigma=1.175605
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.952 mas, bmaj=10.36 mas, bpa=-6.431 degrees
! Estimated noise=0.42936 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000237947 Jy
! Component: 100  -  total flux cleaned = 0.00017037 Jy
! Component: 150  -  total flux cleaned = 0.000113897 Jy
! Component: 200  -  total flux cleaned = 3.60545e-05 Jy
! Total flux subtracted in 200 components = 3.60545e-05 Jy
! Clean residual min=-0.001589 max=0.001548 Jy/beam
! Clean residual mean=0.000009 rms=0.000429 Jy/beam
! Combined flux in latest and established models = 0.299824 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 127 components and 0.299824 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060932Jy  sigma=1.175404
! Fit after  self-cal, rms=0.060931Jy  sigma=1.175374
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.87955e-06 Jy
! Component: 100  -  total flux cleaned = -2.12899e-05 Jy
! Component: 150  -  total flux cleaned = -3.4849e-05 Jy
! Component: 200  -  total flux cleaned = -2.27051e-05 Jy
! Total flux subtracted in 200 components = -2.27051e-05 Jy
! Clean residual min=-0.001614 max=0.001541 Jy/beam
! Clean residual mean=0.000009 rms=0.000428 Jy/beam
! Combined flux in latest and established models = 0.299801 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 139 components and 0.299801 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060927Jy  sigma=1.175303
! Fit after  self-cal, rms=0.060927Jy  sigma=1.175290
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.255 mas, bmaj=6.779 mas, bpa=-5.138 degrees
! Estimated noise=0.335737 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.255 x 6.779 at -5.138 degrees (North through East)
! Clean map  min=-0.0014906  max=0.18556 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.745 mas, bmaj=5.933 mas, bpa=-6.278 degrees
! Estimated noise=0.475605 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.141269 Jy
! Component: 100  -  total flux cleaned = 0.195165 Jy
! Component: 150  -  total flux cleaned = 0.22611 Jy
! Component: 200  -  total flux cleaned = 0.246604 Jy
! Total flux subtracted in 200 components = 0.246604 Jy
! Clean residual min=-0.004818 max=0.011301 Jy/beam
! Clean residual mean=0.000013 rms=0.001468 Jy/beam
! Combined flux in latest and established models = 0.246604 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.246604 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.255 mas, bmaj=6.779 mas, bpa=-5.138 degrees
! Estimated noise=0.335737 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0172481 Jy
! Component: 100  -  total flux cleaned = 0.0283311 Jy
! Component: 150  -  total flux cleaned = 0.035745 Jy
! Component: 200  -  total flux cleaned = 0.0407944 Jy
! Total flux subtracted in 200 components = 0.0407944 Jy
! Clean residual min=-0.002026 max=0.002768 Jy/beam
! Clean residual mean=0.000006 rms=0.000525 Jy/beam
! Combined flux in latest and established models = 0.287399 Jy
! Adding 18 model components to the UV plane model.
! The established model now contains 30 components and 0.287399 Jy
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00349153 Jy
! Component: 100  -  total flux cleaned = 0.00595412 Jy
! Component: 150  -  total flux cleaned = 0.0078088 Jy
! Component: 200  -  total flux cleaned = 0.0092723 Jy
! Total flux subtracted in 200 components = 0.0092723 Jy
! Clean residual min=-0.001593 max=0.001606 Jy/beam
! Clean residual mean=0.000005 rms=0.000389 Jy/beam
! Combined flux in latest and established models = 0.296671 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 56 components and 0.296671 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.952 mas, bmaj=10.36 mas, bpa=-6.431 degrees
! Estimated noise=0.42936 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00111837 Jy
! Component: 100  -  total flux cleaned = 0.0017984 Jy
! Component: 150  -  total flux cleaned = 0.0023212 Jy
! Component: 200  -  total flux cleaned = 0.00270663 Jy
! Total flux subtracted in 200 components = 0.00270663 Jy
! Clean residual min=-0.001692 max=0.001532 Jy/beam
! Clean residual mean=0.000010 rms=0.000441 Jy/beam
! Combined flux in latest and established models = 0.299378 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000294029 Jy
! Component: 100  -  total flux cleaned = 0.000484859 Jy
! Component: 150  -  total flux cleaned = 0.000550586 Jy
! Component: 200  -  total flux cleaned = 0.000580416 Jy
! Total flux subtracted in 200 components = 0.000580416 Jy
! Clean residual min=-0.001660 max=0.001497 Jy/beam
! Clean residual mean=0.000010 rms=0.000432 Jy/beam
! Combined flux in latest and established models = 0.299958 Jy
! Adding 52 model components to the UV plane model.
! The established model now contains 107 components and 0.299958 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.255 mas, bmaj=6.779 mas, bpa=-5.138 degrees
! Estimated noise=0.335737 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000331521 Jy
! Component: 100  -  total flux cleaned = -0.000427072 Jy
! Component: 150  -  total flux cleaned = -0.000512584 Jy
! Component: 200  -  total flux cleaned = -0.000459661 Jy
! Total flux subtracted in 200 components = -0.000459661 Jy
! Clean residual min=-0.001589 max=0.001542 Jy/beam
! Clean residual mean=0.000005 rms=0.000357 Jy/beam
! Combined flux in latest and established models = 0.299498 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 122 components and 0.299498 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060963Jy  sigma=1.176025
! Fit after  self-cal, rms=0.060959Jy  sigma=1.175906
wmodel J0205+2416_S_map.mod
! Writing 122 model components to file: J0205+2416_S_map.mod
wobs   J0205+2416_S_uvs.fits
! Writing UV FITS file: J0205+2416_S_uvs.fits
wwins  J0205+2416_S_map.win
! wwins: Wrote 4 windows to J0205+2416_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -2.7091e-06 Jy
! Component: 100  -  total flux cleaned = -2.88472e-06 Jy
! Component: 150  -  total flux cleaned = 4.40264e-05 Jy
! Component: 200  -  total flux cleaned = 8.8497e-05 Jy
! Component: 250  -  total flux cleaned = 0.000175501 Jy
! Component: 300  -  total flux cleaned = 0.000196876 Jy
! Component: 350  -  total flux cleaned = 0.000238029 Jy
! Component: 400  -  total flux cleaned = 0.000237744 Jy
! Component: 450  -  total flux cleaned = 0.000316273 Jy
! Component: 500  -  total flux cleaned = 0.000374241 Jy
! Component: 550  -  total flux cleaned = 0.000431337 Jy
! Component: 600  -  total flux cleaned = 0.00048671 Jy
! Component: 650  -  total flux cleaned = 0.000595517 Jy
! Component: 700  -  total flux cleaned = 0.0006133 Jy
! Component: 750  -  total flux cleaned = 0.000666072 Jy
! Component: 800  -  total flux cleaned = 0.000735228 Jy
! Component: 850  -  total flux cleaned = 0.000803735 Jy
! Component: 900  -  total flux cleaned = 0.000803738 Jy
! Component: 950  -  total flux cleaned = 0.000903183 Jy
! Component: 1000  -  total flux cleaned = 0.000935554 Jy
! Component: 1050  -  total flux cleaned = 0.000951705 Jy
! Component: 1100  -  total flux cleaned = 0.00098391 Jy
! Component: 1150  -  total flux cleaned = 0.000999952 Jy
! Component: 1200  -  total flux cleaned = 0.00103096 Jy
! Component: 1250  -  total flux cleaned = 0.00106202 Jy
! Component: 1300  -  total flux cleaned = 0.00110753 Jy
! Component: 1350  -  total flux cleaned = 0.00112241 Jy
! Component: 1400  -  total flux cleaned = 0.00112233 Jy
! Component: 1450  -  total flux cleaned = 0.00109314 Jy
! Component: 1500  -  total flux cleaned = 0.00112214 Jy
! Component: 1550  -  total flux cleaned = 0.00107924 Jy
! Component: 1600  -  total flux cleaned = 0.00112181 Jy
! Component: 1650  -  total flux cleaned = 0.00110782 Jy
! Component: 1700  -  total flux cleaned = 0.00109388 Jy
! Component: 1750  -  total flux cleaned = 0.00103899 Jy
! Component: 1800  -  total flux cleaned = 0.001039 Jy
! Component: 1850  -  total flux cleaned = 0.00103907 Jy
! Component: 1900  -  total flux cleaned = 0.00103884 Jy
! Component: 1950  -  total flux cleaned = 0.000959458 Jy
! Component: 2000  -  total flux cleaned = 0.000959672 Jy
! Component: 2050  -  total flux cleaned = 0.000998888 Jy
! Component: 2100  -  total flux cleaned = 0.00102462 Jy
! Component: 2150  -  total flux cleaned = 0.000986263 Jy
! Component: 2200  -  total flux cleaned = 0.000998968 Jy
! Component: 2250  -  total flux cleaned = 0.00103659 Jy
! Component: 2300  -  total flux cleaned = 0.0010115 Jy
! Component: 2350  -  total flux cleaned = 0.00108563 Jy
! Component: 2400  -  total flux cleaned = 0.00106094 Jy
! Component: 2450  -  total flux cleaned = 0.001073 Jy
! Component: 2500  -  total flux cleaned = 0.00107303 Jy
! Component: 2550  -  total flux cleaned = 0.00110899 Jy
! Component: 2600  -  total flux cleaned = 0.00106154 Jy
! Component: 2650  -  total flux cleaned = 0.00109718 Jy
! Component: 2700  -  total flux cleaned = 0.00109721 Jy
! Component: 2750  -  total flux cleaned = 0.00110891 Jy
! Component: 2800  -  total flux cleaned = 0.00113196 Jy
! Component: 2850  -  total flux cleaned = 0.00114343 Jy
! Component: 2900  -  total flux cleaned = 0.00115467 Jy
! Component: 2950  -  total flux cleaned = 0.00115458 Jy
! Component: 3000  -  total flux cleaned = 0.00115463 Jy
! Component: 3050  -  total flux cleaned = 0.00115475 Jy
! Component: 3100  -  total flux cleaned = 0.0011659 Jy
! Component: 3150  -  total flux cleaned = 0.00114401 Jy
! Component: 3200  -  total flux cleaned = 0.0011659 Jy
! Component: 3250  -  total flux cleaned = 0.00116595 Jy
! Component: 3300  -  total flux cleaned = 0.00112286 Jy
! Component: 3350  -  total flux cleaned = 0.00115505 Jy
! Component: 3400  -  total flux cleaned = 0.00112321 Jy
! Component: 3450  -  total flux cleaned = 0.00115484 Jy
! Component: 3500  -  total flux cleaned = 0.00118626 Jy
! Component: 3550  -  total flux cleaned = 0.00115502 Jy
! Component: 3600  -  total flux cleaned = 0.00116538 Jy
! Component: 3650  -  total flux cleaned = 0.00117552 Jy
! Component: 3700  -  total flux cleaned = 0.00117549 Jy
! Component: 3750  -  total flux cleaned = 0.00119591 Jy
! Component: 3800  -  total flux cleaned = 0.00116551 Jy
! Component: 3850  -  total flux cleaned = 0.00121585 Jy
! Component: 3900  -  total flux cleaned = 0.00122578 Jy
! Component: 3950  -  total flux cleaned = 0.00122577 Jy
! Component: 4000  -  total flux cleaned = 0.00123563 Jy
! Component: 4050  -  total flux cleaned = 0.0012258 Jy
! Total flux subtracted in 4096 components = 0.00125519 Jy
! Clean residual min=-0.000601 max=0.000658 Jy/beam
! Clean residual mean=0.000002 rms=0.000181 Jy/beam
! Combined flux in latest and established models = 0.300754 Jy
keep
! Adding 306 model components to the UV plane model.
! The established model now contains 428 components and 0.300753 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0205+2416_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.255 x 6.779 at -5.138 degrees (North through East)
! Clean map  min=-0.00096644  max=0.18613 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0205+2416_S_map.fits
wmodel /vlbi/uf001/uva//J0205+2416_S_map.mod
! Writing 428 model components to file: /vlbi/uf001/uva//J0205+2416_S_map.mod
wobs   /vlbi/uf001/uva//J0205+2416_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0205+2416_S_uvs.fits
wwins  /vlbi/uf001/uva//J0205+2416_S_map.win
! wwins: Wrote 5 windows to /vlbi/uf001/uva//J0205+2416_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.186128 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000180373 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.290725 0.290725 0.58145 1.1629 2.3258 4.6516 9.3032 18.6064 37.2128 74.4256
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.186 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1031.9 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0205+2416_S_dfm.log closed on Sun Jan 13 21:15:19 2019