! Started logfile: /vlbi/uf001/uva//J0204+3649_X_dfm.log on Sun Jan 13 21:14:31 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /vlbi/uf001/uva//J0204+3649_X_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0204+3649_X_uva.fits
! AN table 1: 42 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.89418 visibilities/baseline/integration-bin.
! Found source: J0204+3649
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 20280 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0204+3649_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 81 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 81 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 81 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 81 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 81 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 81 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 81 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 81 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 81 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 81 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 81 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 81 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.019480Jy  sigma=23.657037
! Fit after  self-cal, rms=0.816899Jy  sigma=18.926502
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7165 mas, bmaj=1.337 mas, bpa=-6.702 degrees
! Estimated noise=0.393325 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.138924 Jy
! Component: 100  -  total flux cleaned = 0.189831 Jy
! Total flux subtracted in 100 components = 0.189831 Jy
! Clean residual min=-0.007172 max=0.022180 Jy/beam
! Clean residual mean=0.000004 rms=0.001725 Jy/beam
! Combined flux in latest and established models = 0.189831 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.189831 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067503Jy  sigma=1.521342
! Fit after  self-cal, rms=0.067334Jy  sigma=1.517764
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0240197 Jy
! Component: 100  -  total flux cleaned = 0.0356513 Jy
! Total flux subtracted in 100 components = 0.0356513 Jy
! Clean residual min=-0.005077 max=0.012111 Jy/beam
! Clean residual mean=0.000003 rms=0.001152 Jy/beam
! Combined flux in latest and established models = 0.225482 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 14 components and 0.225482 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058752Jy  sigma=1.321122
! Fit after  self-cal, rms=0.058729Jy  sigma=1.320441
! Inverting map 
! Added new window around map position (0, 2.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0101383 Jy
! Component: 100  -  total flux cleaned = 0.0146302 Jy
! Total flux subtracted in 100 components = 0.0146302 Jy
! Clean residual min=-0.004826 max=0.006114 Jy/beam
! Clean residual mean=0.000003 rms=0.001005 Jy/beam
! Combined flux in latest and established models = 0.240113 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 20 components and 0.240113 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056810Jy  sigma=1.274203
! Fit after  self-cal, rms=0.056716Jy  sigma=1.271924
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9056 mas, bmaj=1.609 mas, bpa=-5.421 degrees
! Estimated noise=0.234604 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.6, 1.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00672094 Jy
! Component: 100  -  total flux cleaned = 0.0105972 Jy
! Component: 150  -  total flux cleaned = 0.0121007 Jy
! Component: 200  -  total flux cleaned = 0.0130484 Jy
! Total flux subtracted in 200 components = 0.0130484 Jy
! Clean residual min=-0.004643 max=0.005860 Jy/beam
! Clean residual mean=0.000004 rms=0.000957 Jy/beam
! Combined flux in latest and established models = 0.253161 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 44 components and 0.253161 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055859Jy  sigma=1.249363
! Fit after  self-cal, rms=0.055785Jy  sigma=1.247612
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9056 x 1.609 at -5.421 degrees (North through East)
! Clean map  min=-0.0042189  max=0.18174 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.99     HN        0.96     KP        1.07     
!   LA        0.98     MK        0.98     NL        1.10     OV        0.91     
!   PT        0.94     SC        0.96     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.01     HN        0.95     KP        1.03     
!   LA        0.99     MK        1.00     NL        1.11     OV        0.93     
!   PT        0.92     SC        0.95     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.00     HN        0.95     KP        1.07     
!   LA        0.98     MK        1.01     NL        1.10     OV        0.92     
!   PT        0.93     SC        0.98     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        1.02     HN        0.92     KP        1.07     
!   LA        0.98     MK        1.02     NL        1.09     OV        0.90     
!   PT        0.94     SC        0.97     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.02     HN        0.93     KP        1.08     
!   LA        0.97     MK        1.01     NL        1.15     OV        0.91     
!   PT        0.90     SC        0.96     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.99     HN        0.94     KP        1.05     
!   LA        0.98     MK        1.02     NL        1.11     OV        0.92     
!   PT        0.93     SC        0.95     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.99     HN        0.98     KP        1.07     
!   LA        0.98     MK        1.00     NL        1.14     OV        0.91     
!   PT        0.92     SC        0.96     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.99     HN        0.98     KP        1.04     
!   LA        0.98     MK        1.01     NL        1.13     OV        0.90     
!   PT        0.93     SC        0.99     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.01     HN        0.96     KP        1.06     
!   LA        0.99     MK        1.03     NL        1.12     OV        0.91     
!   PT        0.92     SC        1.00     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.02     HN        0.94     KP        1.06     
!   LA        0.98     MK        1.02     NL        1.11     OV        0.92     
!   PT        0.91     SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.99     HN        0.94     KP        1.07     
!   LA        1.03     MK        1.03     NL        1.15     OV        0.92     
!   PT        0.94     SC        0.95     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.01     HN        0.96     KP        1.04     
!   LA        0.97     MK        1.02     NL        1.11     OV        0.94     
!   PT        0.94     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.055785Jy  sigma=1.247612
! Fit after  self-cal, rms=0.053217Jy  sigma=1.181561
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9025 mas, bmaj=1.611 mas, bpa=-5.055 degrees
! Estimated noise=0.235281 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00130167 Jy
! Component: 100  -  total flux cleaned = -0.00152177 Jy
! Component: 150  -  total flux cleaned = -0.00152333 Jy
! Component: 200  -  total flux cleaned = -0.00163076 Jy
! Total flux subtracted in 200 components = -0.00163076 Jy
! Clean residual min=-0.002048 max=0.002053 Jy/beam
! Clean residual mean=0.000001 rms=0.000417 Jy/beam
! Combined flux in latest and established models = 0.25153 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 68 components and 0.25153 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053033Jy  sigma=1.177115
! Fit after  self-cal, rms=0.053048Jy  sigma=1.176658
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053048Jy  sigma=1.176658
! Fit after  self-cal, rms=0.053053Jy  sigma=1.169981
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9028 mas, bmaj=1.621 mas, bpa=-5.628 degrees
! Estimated noise=0.236077 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00114482 Jy
! Component: 100  -  total flux cleaned = -0.00127587 Jy
! Component: 150  -  total flux cleaned = -0.0013851 Jy
! Component: 200  -  total flux cleaned = -0.00148055 Jy
! Total flux subtracted in 200 components = -0.00148055 Jy
! Clean residual min=-0.001575 max=0.002052 Jy/beam
! Clean residual mean=0.000001 rms=0.000345 Jy/beam
! Combined flux in latest and established models = 0.25005 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 81 components and 0.25005 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052989Jy  sigma=1.168508
! Fit after  self-cal, rms=0.052983Jy  sigma=1.168378
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.6, 7).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00208886 Jy
! Component: 100  -  total flux cleaned = 0.00335807 Jy
! Component: 150  -  total flux cleaned = 0.00397297 Jy
! Component: 200  -  total flux cleaned = 0.00419911 Jy
! Total flux subtracted in 200 components = 0.00419911 Jy
! Clean residual min=-0.001491 max=0.001390 Jy/beam
! Clean residual mean=0.000001 rms=0.000305 Jy/beam
! Combined flux in latest and established models = 0.254249 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 98 components and 0.254249 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052886Jy  sigma=1.166084
! Fit after  self-cal, rms=0.052883Jy  sigma=1.166003
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052883Jy  sigma=1.166003
! Fit after  self-cal, rms=0.052845Jy  sigma=1.165554
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9022 mas, bmaj=1.62 mas, bpa=-5.633 degrees
! Estimated noise=0.23607 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00043812 Jy
! Component: 100  -  total flux cleaned = 0.000535833 Jy
! Component: 150  -  total flux cleaned = 0.000536149 Jy
! Component: 200  -  total flux cleaned = 0.000592003 Jy
! Total flux subtracted in 200 components = 0.000592003 Jy
! Clean residual min=-0.001444 max=0.001305 Jy/beam
! Clean residual mean=0.000001 rms=0.000286 Jy/beam
! Combined flux in latest and established models = 0.254841 Jy
selfcal
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 107 components and 0.254841 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052809Jy  sigma=1.164777
! Fit after  self-cal, rms=0.052808Jy  sigma=1.164755
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.09153e-05 Jy
! Component: 100  -  total flux cleaned = -3.50616e-05 Jy
! Component: 150  -  total flux cleaned = 1.33137e-05 Jy
! Component: 200  -  total flux cleaned = 3.61808e-05 Jy
! Total flux subtracted in 200 components = 3.61808e-05 Jy
! Clean residual min=-0.001425 max=0.001298 Jy/beam
! Clean residual mean=0.000001 rms=0.000281 Jy/beam
! Combined flux in latest and established models = 0.254877 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 108 components and 0.254877 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052787Jy  sigma=1.164331
! Fit after  self-cal, rms=0.052787Jy  sigma=1.164324
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052787Jy  sigma=1.164324
! Fit after  self-cal, rms=0.052784Jy  sigma=1.164244
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.049 mas, bmaj=2.558 mas, bpa=1.282 degrees
! Estimated noise=0.301721 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000103433 Jy
! Component: 100  -  total flux cleaned = 7.48696e-05 Jy
! Component: 150  -  total flux cleaned = 0.000195406 Jy
! Component: 200  -  total flux cleaned = 0.000276204 Jy
! Total flux subtracted in 200 components = 0.000276204 Jy
! Clean residual min=-0.001542 max=0.001349 Jy/beam
! Clean residual mean=0.000002 rms=0.000329 Jy/beam
! Combined flux in latest and established models = 0.255153 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 126 components and 0.255153 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052778Jy  sigma=1.164083
! Fit after  self-cal, rms=0.052777Jy  sigma=1.164066
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.75359e-05 Jy
! Component: 100  -  total flux cleaned = 7.29053e-06 Jy
! Component: 150  -  total flux cleaned = 4.43726e-05 Jy
! Component: 200  -  total flux cleaned = 6.85576e-05 Jy
! Total flux subtracted in 200 components = 6.85576e-05 Jy
! Clean residual min=-0.001512 max=0.001314 Jy/beam
! Clean residual mean=0.000002 rms=0.000324 Jy/beam
! Combined flux in latest and established models = 0.255222 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 139 components and 0.255222 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052777Jy  sigma=1.164051
! Fit after  self-cal, rms=0.052776Jy  sigma=1.164048
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9017 mas, bmaj=1.62 mas, bpa=-5.647 degrees
! Estimated noise=0.236082 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9017 x 1.62 at -5.647 degrees (North through East)
! Clean map  min=-0.0014186  max=0.18289 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7132 mas, bmaj=1.347 mas, bpa=-6.933 degrees
! Estimated noise=0.3955 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.139559 Jy
! Component: 100  -  total flux cleaned = 0.190654 Jy
! Component: 150  -  total flux cleaned = 0.214379 Jy
! Component: 200  -  total flux cleaned = 0.227659 Jy
! Total flux subtracted in 200 components = 0.227659 Jy
! Clean residual min=-0.003393 max=0.006780 Jy/beam
! Clean residual mean=0.000001 rms=0.000770 Jy/beam
! Combined flux in latest and established models = 0.227659 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.227659 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9017 mas, bmaj=1.62 mas, bpa=-5.647 degrees
! Estimated noise=0.236082 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00836676 Jy
! Component: 100  -  total flux cleaned = 0.01322 Jy
! Component: 150  -  total flux cleaned = 0.0164584 Jy
! Component: 200  -  total flux cleaned = 0.0188149 Jy
! Total flux subtracted in 200 components = 0.0188149 Jy
! Clean residual min=-0.001503 max=0.001639 Jy/beam
! Clean residual mean=0.000001 rms=0.000344 Jy/beam
! Combined flux in latest and established models = 0.246474 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 35 components and 0.246474 Jy
! Inverting map 
! Added new window around map position (-1, 3).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0016194 Jy
! Component: 100  -  total flux cleaned = 0.00290052 Jy
! Component: 150  -  total flux cleaned = 0.00400615 Jy
! Component: 200  -  total flux cleaned = 0.00497719 Jy
! Total flux subtracted in 200 components = 0.00497719 Jy
! Clean residual min=-0.001349 max=0.001210 Jy/beam
! Clean residual mean=0.000001 rms=0.000298 Jy/beam
! Combined flux in latest and established models = 0.251451 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 55 components and 0.251451 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.049 mas, bmaj=2.558 mas, bpa=1.282 degrees
! Estimated noise=0.301721 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0013249 Jy
! Component: 100  -  total flux cleaned = 0.00211944 Jy
! Component: 150  -  total flux cleaned = 0.00239707 Jy
! Component: 200  -  total flux cleaned = 0.00260299 Jy
! Total flux subtracted in 200 components = 0.00260299 Jy
! Clean residual min=-0.001496 max=0.001337 Jy/beam
! Clean residual mean=0.000002 rms=0.000331 Jy/beam
! Combined flux in latest and established models = 0.254054 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000175415 Jy
! Component: 100  -  total flux cleaned = 0.000328265 Jy
! Component: 150  -  total flux cleaned = 0.000449807 Jy
! Component: 200  -  total flux cleaned = 0.000569239 Jy
! Total flux subtracted in 200 components = 0.000569239 Jy
! Clean residual min=-0.001459 max=0.001297 Jy/beam
! Clean residual mean=0.000002 rms=0.000325 Jy/beam
! Combined flux in latest and established models = 0.254623 Jy
! Adding 57 model components to the UV plane model.
! The established model now contains 108 components and 0.254623 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9017 mas, bmaj=1.62 mas, bpa=-5.647 degrees
! Estimated noise=0.236082 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.34837e-05 Jy
! Component: 100  -  total flux cleaned = -0.000153866 Jy
! Component: 150  -  total flux cleaned = -0.000185883 Jy
! Component: 200  -  total flux cleaned = -0.000123003 Jy
! Total flux subtracted in 200 components = -0.000123003 Jy
! Clean residual min=-0.001258 max=0.001139 Jy/beam
! Clean residual mean=0.000001 rms=0.000277 Jy/beam
! Combined flux in latest and established models = 0.2545 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 126 components and 0.2545 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052817Jy  sigma=1.164630
! Fit after  self-cal, rms=0.052811Jy  sigma=1.164536
wmodel J0204+3649_X_map.mod
! Writing 126 model components to file: J0204+3649_X_map.mod
wobs   J0204+3649_X_uvs.fits
! Writing UV FITS file: J0204+3649_X_uvs.fits
wwins  J0204+3649_X_map.win
! wwins: Wrote 5 windows to J0204+3649_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000370336 Jy
! Component: 100  -  total flux cleaned = -0.000476222 Jy
! Component: 150  -  total flux cleaned = -0.000557632 Jy
! Component: 200  -  total flux cleaned = -0.000537871 Jy
! Component: 250  -  total flux cleaned = -0.00053851 Jy
! Component: 300  -  total flux cleaned = -0.00055751 Jy
! Component: 350  -  total flux cleaned = -0.000575639 Jy
! Component: 400  -  total flux cleaned = -0.000557909 Jy
! Component: 450  -  total flux cleaned = -0.0005755 Jy
! Component: 500  -  total flux cleaned = -0.000592887 Jy
! Component: 550  -  total flux cleaned = -0.000609953 Jy
! Component: 600  -  total flux cleaned = -0.000609828 Jy
! Component: 650  -  total flux cleaned = -0.000577244 Jy
! Component: 700  -  total flux cleaned = -0.000528689 Jy
! Component: 750  -  total flux cleaned = -0.000528775 Jy
! Component: 800  -  total flux cleaned = -0.000497112 Jy
! Component: 850  -  total flux cleaned = -0.000465917 Jy
! Component: 900  -  total flux cleaned = -0.000435281 Jy
! Component: 950  -  total flux cleaned = -0.000389691 Jy
! Component: 1000  -  total flux cleaned = -0.000344683 Jy
! Component: 1050  -  total flux cleaned = -0.000389444 Jy
! Component: 1100  -  total flux cleaned = -0.000330107 Jy
! Component: 1150  -  total flux cleaned = -0.000315779 Jy
! Component: 1200  -  total flux cleaned = -0.000330246 Jy
! Component: 1250  -  total flux cleaned = -0.000301294 Jy
! Component: 1300  -  total flux cleaned = -0.00032982 Jy
! Component: 1350  -  total flux cleaned = -0.00032963 Jy
! Component: 1400  -  total flux cleaned = -0.000343349 Jy
! Component: 1450  -  total flux cleaned = -0.000315686 Jy
! Component: 1500  -  total flux cleaned = -0.000329505 Jy
! Component: 1550  -  total flux cleaned = -0.000329477 Jy
! Component: 1600  -  total flux cleaned = -0.000342961 Jy
! Component: 1650  -  total flux cleaned = -0.000302699 Jy
! Component: 1700  -  total flux cleaned = -0.000369241 Jy
! Component: 1750  -  total flux cleaned = -0.000408905 Jy
! Component: 1800  -  total flux cleaned = -0.000421932 Jy
! Component: 1850  -  total flux cleaned = -0.000395749 Jy
! Component: 1900  -  total flux cleaned = -0.000408708 Jy
! Component: 1950  -  total flux cleaned = -0.00043444 Jy
! Component: 2000  -  total flux cleaned = -0.000459749 Jy
! Component: 2050  -  total flux cleaned = -0.000459847 Jy
! Component: 2100  -  total flux cleaned = -0.000522799 Jy
! Component: 2150  -  total flux cleaned = -0.000547653 Jy
! Component: 2200  -  total flux cleaned = -0.000597142 Jy
! Component: 2250  -  total flux cleaned = -0.000609503 Jy
! Component: 2300  -  total flux cleaned = -0.000646168 Jy
! Component: 2350  -  total flux cleaned = -0.000706729 Jy
! Component: 2400  -  total flux cleaned = -0.000670706 Jy
! Component: 2450  -  total flux cleaned = -0.000730531 Jy
! Component: 2500  -  total flux cleaned = -0.00077824 Jy
! Component: 2550  -  total flux cleaned = -0.000825448 Jy
! Component: 2600  -  total flux cleaned = -0.000825534 Jy
! Component: 2650  -  total flux cleaned = -0.000848637 Jy
! Component: 2700  -  total flux cleaned = -0.000860391 Jy
! Component: 2750  -  total flux cleaned = -0.000906452 Jy
! Component: 2800  -  total flux cleaned = -0.000929435 Jy
! Component: 2850  -  total flux cleaned = -0.000917989 Jy
! Component: 2900  -  total flux cleaned = -0.000918027 Jy
! Component: 2950  -  total flux cleaned = -0.000918006 Jy
! Component: 3000  -  total flux cleaned = -0.000929145 Jy
! Component: 3050  -  total flux cleaned = -0.000940269 Jy
! Component: 3100  -  total flux cleaned = -0.000973377 Jy
! Component: 3150  -  total flux cleaned = -0.000984351 Jy
! Component: 3200  -  total flux cleaned = -0.00100624 Jy
! Component: 3250  -  total flux cleaned = -0.000973645 Jy
! Component: 3300  -  total flux cleaned = -0.000984473 Jy
! Component: 3350  -  total flux cleaned = -0.00100594 Jy
! Component: 3400  -  total flux cleaned = -0.000963113 Jy
! Component: 3450  -  total flux cleaned = -0.00103767 Jy
! Component: 3500  -  total flux cleaned = -0.00101652 Jy
! Component: 3550  -  total flux cleaned = -0.000974182 Jy
! Component: 3600  -  total flux cleaned = -0.00100569 Jy
! Component: 3650  -  total flux cleaned = -0.000995238 Jy
! Component: 3700  -  total flux cleaned = -0.000964078 Jy
! Component: 3750  -  total flux cleaned = -0.000995053 Jy
! Component: 3800  -  total flux cleaned = -0.00102584 Jy
! Component: 3850  -  total flux cleaned = -0.0010259 Jy
! Component: 3900  -  total flux cleaned = -0.0010158 Jy
! Component: 3950  -  total flux cleaned = -0.000995603 Jy
! Component: 4000  -  total flux cleaned = -0.000985468 Jy
! Component: 4050  -  total flux cleaned = -0.000965413 Jy
! Total flux subtracted in 4096 components = -0.000985362 Jy
! Clean residual min=-0.000546 max=0.000643 Jy/beam
! Clean residual mean=0.000000 rms=0.000168 Jy/beam
! Combined flux in latest and established models = 0.253515 Jy
keep
! Adding 320 model components to the UV plane model.
! The established model now contains 446 components and 0.253515 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0204+3649_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9017 x 1.62 at -5.647 degrees (North through East)
! Clean map  min=-0.0012301  max=0.1831 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0204+3649_X_map.fits
wmodel /vlbi/uf001/uva//J0204+3649_X_map.mod
! Writing 446 model components to file: /vlbi/uf001/uva//J0204+3649_X_map.mod
wobs   /vlbi/uf001/uva//J0204+3649_X_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0204+3649_X_uvs.fits
wwins  /vlbi/uf001/uva//J0204+3649_X_map.win
! wwins: Wrote 6 windows to /vlbi/uf001/uva//J0204+3649_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.1831 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000168151 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.275508 0.275508 0.551015 1.10203 2.20406 4.40812 8.81624 17.6325 35.265 70.53
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.183 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1088.9 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0204+3649_X_dfm.log closed on Sun Jan 13 21:14:36 2019