! Started logfile: /vlbi/uf001/uva//J0203+8106_S_dfm.log on Sun Jan 13 21:13:59 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J0203+8106_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0203+8106_S_uva.fits
! AN table 1: 76 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.84269 visibilities/baseline/integration-bin.
! Found source: J0203+8106
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 8646 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0203+8106_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 87 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 87 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 87 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.042743Jy  sigma=20.612022
! Fit after  self-cal, rms=0.768139Jy  sigma=15.080518
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.279 mas, bmaj=3.533 mas, bpa=-51.35 degrees
! Estimated noise=0.605026 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.175135 Jy
! Component: 100  -  total flux cleaned = 0.256173 Jy
! Total flux subtracted in 100 components = 0.256173 Jy
! Clean residual min=-0.015613 max=0.040412 Jy/beam
! Clean residual mean=-0.000097 rms=0.004094 Jy/beam
! Combined flux in latest and established models = 0.256173 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.256173 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.115022Jy  sigma=2.217838
! Fit after  self-cal, rms=0.114172Jy  sigma=2.201593
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0493753 Jy
! Component: 100  -  total flux cleaned = 0.0786085 Jy
! Total flux subtracted in 100 components = 0.0786085 Jy
! Clean residual min=-0.010276 max=0.016363 Jy/beam
! Clean residual mean=-0.000053 rms=0.002359 Jy/beam
! Combined flux in latest and established models = 0.334782 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 23 components and 0.334782 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.083135Jy  sigma=1.567896
! Fit after  self-cal, rms=0.082668Jy  sigma=1.556332
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0206752 Jy
! Component: 100  -  total flux cleaned = 0.0325527 Jy
! Total flux subtracted in 100 components = 0.0325527 Jy
! Clean residual min=-0.008896 max=0.011080 Jy/beam
! Clean residual mean=-0.000035 rms=0.001909 Jy/beam
! Combined flux in latest and established models = 0.367334 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 29 components and 0.367334 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075978Jy  sigma=1.418612
! Fit after  self-cal, rms=0.075835Jy  sigma=1.413606
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.951 mas, bmaj=4.398 mas, bpa=-51.71 degrees
! Estimated noise=0.404793 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-6, -1.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0128983 Jy
! Component: 100  -  total flux cleaned = 0.0207515 Jy
! Component: 150  -  total flux cleaned = 0.0249184 Jy
! Component: 200  -  total flux cleaned = 0.0269058 Jy
! Total flux subtracted in 200 components = 0.0269058 Jy
! Clean residual min=-0.007224 max=0.006133 Jy/beam
! Clean residual mean=-0.000046 rms=0.001397 Jy/beam
! Combined flux in latest and established models = 0.39424 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 56 components and 0.39424 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.073319Jy  sigma=1.362814
! Fit after  self-cal, rms=0.073106Jy  sigma=1.358364
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.951 x 4.398 at -51.71 degrees (North through East)
! Clean map  min=-0.006713  max=0.22308 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.97     HN        0.99     KP        1.01     
!   LA        0.89     MK        1.02     NL        1.06     OV        1.00     
!   PT        1.01     SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.97     HN        1.00     KP        1.07     
!   LA        0.91     MK        1.03     NL        1.03     OV        0.99     
!   PT        1.01     SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.98     HN        1.00     KP        1.15     
!   LA        0.93     MK        1.03     NL        1.00     OV        0.99     
!   PT        1.03     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.073106Jy  sigma=1.358364
! Fit after  self-cal, rms=0.071362Jy  sigma=1.312911
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.969 mas, bmaj=4.417 mas, bpa=-51.71 degrees
! Estimated noise=0.403508 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00254092 Jy
! Component: 100  -  total flux cleaned = -0.00284219 Jy
! Component: 150  -  total flux cleaned = -0.00296818 Jy
! Component: 200  -  total flux cleaned = -0.00308237 Jy
! Total flux subtracted in 200 components = -0.00308237 Jy
! Clean residual min=-0.004933 max=0.004037 Jy/beam
! Clean residual mean=-0.000009 rms=0.001009 Jy/beam
! Combined flux in latest and established models = 0.391158 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 74 components and 0.391158 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070763Jy  sigma=1.302095
! Fit after  self-cal, rms=0.070698Jy  sigma=1.300534
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070698Jy  sigma=1.300534
! Fit after  self-cal, rms=0.070952Jy  sigma=1.280481
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.992 mas, bmaj=4.403 mas, bpa=-50.15 degrees
! Estimated noise=0.404864 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00141206 Jy
! Component: 100  -  total flux cleaned = -0.00117294 Jy
! Component: 150  -  total flux cleaned = -0.000967118 Jy
! Component: 200  -  total flux cleaned = -0.00106444 Jy
! Total flux subtracted in 200 components = -0.00106444 Jy
! Clean residual min=-0.004219 max=0.003750 Jy/beam
! Clean residual mean=-0.000009 rms=0.000834 Jy/beam
! Combined flux in latest and established models = 0.390093 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 85 components and 0.390094 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070526Jy  sigma=1.274210
! Fit after  self-cal, rms=0.070461Jy  sigma=1.273058
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.50968e-05 Jy
! Component: 100  -  total flux cleaned = 7.03074e-05 Jy
! Component: 150  -  total flux cleaned = 7.4138e-05 Jy
! Component: 200  -  total flux cleaned = 7.23797e-05 Jy
! Total flux subtracted in 200 components = 7.23797e-05 Jy
! Clean residual min=-0.003920 max=0.003577 Jy/beam
! Clean residual mean=-0.000009 rms=0.000800 Jy/beam
! Combined flux in latest and established models = 0.390166 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 96 components and 0.390166 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070160Jy  sigma=1.268763
! Fit after  self-cal, rms=0.070085Jy  sigma=1.267785
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070085Jy  sigma=1.267785
! Fit after  self-cal, rms=0.069709Jy  sigma=1.267577
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.981 mas, bmaj=4.408 mas, bpa=-50.44 degrees
! Estimated noise=0.403687 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000666753 Jy
! Component: 100  -  total flux cleaned = -0.000844944 Jy
! Component: 150  -  total flux cleaned = -0.000920594 Jy
! Component: 200  -  total flux cleaned = -0.000919584 Jy
! Total flux subtracted in 200 components = -0.000919584 Jy
! Clean residual min=-0.003790 max=0.003367 Jy/beam
! Clean residual mean=-0.000009 rms=0.000766 Jy/beam
! Combined flux in latest and established models = 0.389246 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 99 components and 0.389246 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069455Jy  sigma=1.263964
! Fit after  self-cal, rms=0.069390Jy  sigma=1.263074
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.51766e-05 Jy
! Component: 100  -  total flux cleaned = 0.000184144 Jy
! Component: 150  -  total flux cleaned = 0.000114967 Jy
! Component: 200  -  total flux cleaned = 5.14007e-05 Jy
! Total flux subtracted in 200 components = 5.14007e-05 Jy
! Clean residual min=-0.003689 max=0.003242 Jy/beam
! Clean residual mean=-0.000009 rms=0.000740 Jy/beam
! Combined flux in latest and established models = 0.389298 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 107 components and 0.389298 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069185Jy  sigma=1.260270
! Fit after  self-cal, rms=0.069128Jy  sigma=1.259455
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069128Jy  sigma=1.259455
! Fit after  self-cal, rms=0.068791Jy  sigma=1.259344
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.245 mas, bmaj=8.761 mas, bpa=-26.57 degrees
! Estimated noise=0.520925 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000252655 Jy
! Component: 100  -  total flux cleaned = -0.000145496 Jy
! Component: 150  -  total flux cleaned = -1.52168e-05 Jy
! Component: 200  -  total flux cleaned = 8.87216e-05 Jy
! Total flux subtracted in 200 components = 8.87216e-05 Jy
! Clean residual min=-0.002619 max=0.003165 Jy/beam
! Clean residual mean=-0.000016 rms=0.000738 Jy/beam
! Combined flux in latest and established models = 0.389386 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 120 components and 0.389386 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068727Jy  sigma=1.258470
! Fit after  self-cal, rms=0.068664Jy  sigma=1.257789
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.70709e-05 Jy
! Component: 100  -  total flux cleaned = -9.09911e-05 Jy
! Component: 150  -  total flux cleaned = -2.73728e-05 Jy
! Component: 200  -  total flux cleaned = 4.95267e-05 Jy
! Total flux subtracted in 200 components = 4.95267e-05 Jy
! Clean residual min=-0.002619 max=0.003151 Jy/beam
! Clean residual mean=-0.000015 rms=0.000730 Jy/beam
! Combined flux in latest and established models = 0.389436 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 125 components and 0.389436 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068619Jy  sigma=1.257209
! Fit after  self-cal, rms=0.068547Jy  sigma=1.256556
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.97 mas, bmaj=4.415 mas, bpa=-51.08 degrees
! Estimated noise=0.402582 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.97 x 4.415 at -51.08 degrees (North through East)
! Clean map  min=-0.0044001  max=0.22119 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.294 mas, bmaj=3.54 mas, bpa=-51.1 degrees
! Estimated noise=0.608483 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.180894 Jy
! Component: 100  -  total flux cleaned = 0.262439 Jy
! Component: 150  -  total flux cleaned = 0.308152 Jy
! Component: 200  -  total flux cleaned = 0.335312 Jy
! Total flux subtracted in 200 components = 0.335312 Jy
! Clean residual min=-0.007274 max=0.013987 Jy/beam
! Clean residual mean=-0.000036 rms=0.001780 Jy/beam
! Combined flux in latest and established models = 0.335312 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.335312 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.97 mas, bmaj=4.415 mas, bpa=-51.08 degrees
! Estimated noise=0.402582 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.021003 Jy
! Component: 100  -  total flux cleaned = 0.032977 Jy
! Component: 150  -  total flux cleaned = 0.0407521 Jy
! Component: 200  -  total flux cleaned = 0.0459963 Jy
! Total flux subtracted in 200 components = 0.0459963 Jy
! Clean residual min=-0.003866 max=0.004462 Jy/beam
! Clean residual mean=-0.000020 rms=0.000860 Jy/beam
! Combined flux in latest and established models = 0.381308 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 49 components and 0.381308 Jy
! Inverting map 
! Added new window around map position (-4, -8.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00316863 Jy
! Component: 100  -  total flux cleaned = 0.00404811 Jy
! Component: 150  -  total flux cleaned = 0.00481494 Jy
! Component: 200  -  total flux cleaned = 0.00549413 Jy
! Total flux subtracted in 200 components = 0.00549413 Jy
! Clean residual min=-0.003845 max=0.003020 Jy/beam
! Clean residual mean=-0.000011 rms=0.000758 Jy/beam
! Combined flux in latest and established models = 0.386802 Jy
! Adding 21 model components to the UV plane model.
! The established model now contains 64 components and 0.386802 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.245 mas, bmaj=8.761 mas, bpa=-26.57 degrees
! Estimated noise=0.520925 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00203438 Jy
! Component: 100  -  total flux cleaned = 0.00241594 Jy
! Component: 150  -  total flux cleaned = 0.00283762 Jy
! Component: 200  -  total flux cleaned = 0.00319355 Jy
! Total flux subtracted in 200 components = 0.00319355 Jy
! Clean residual min=-0.002768 max=0.003458 Jy/beam
! Clean residual mean=-0.000013 rms=0.000740 Jy/beam
! Combined flux in latest and established models = 0.389996 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-31, 19.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00293744 Jy
! Component: 100  -  total flux cleaned = 0.00444075 Jy
! Component: 150  -  total flux cleaned = 0.00464444 Jy
! Component: 200  -  total flux cleaned = 0.00490836 Jy
! Total flux subtracted in 200 components = 0.00490836 Jy
! Clean residual min=-0.002984 max=0.002283 Jy/beam
! Clean residual mean=-0.000006 rms=0.000662 Jy/beam
! Combined flux in latest and established models = 0.394904 Jy
! Adding 56 model components to the UV plane model.
! The established model now contains 117 components and 0.394904 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.97 mas, bmaj=4.415 mas, bpa=-51.08 degrees
! Estimated noise=0.402582 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000598472 Jy
! Component: 100  -  total flux cleaned = -0.00104536 Jy
! Component: 150  -  total flux cleaned = -0.000477533 Jy
! Component: 200  -  total flux cleaned = -4.98583e-05 Jy
! Total flux subtracted in 200 components = -4.98583e-05 Jy
! Clean residual min=-0.003572 max=0.002737 Jy/beam
! Clean residual mean=-0.000003 rms=0.000655 Jy/beam
! Combined flux in latest and established models = 0.394854 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 140 components and 0.394854 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068024Jy  sigma=1.249879
! Fit after  self-cal, rms=0.067736Jy  sigma=1.245168
wmodel J0203+8106_S_map.mod
! Writing 140 model components to file: J0203+8106_S_map.mod
wobs   J0203+8106_S_uvs.fits
! Writing UV FITS file: J0203+8106_S_uvs.fits
wwins  J0203+8106_S_map.win
! wwins: Wrote 4 windows to J0203+8106_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000789009 Jy
! Component: 100  -  total flux cleaned = -0.00144476 Jy
! Component: 150  -  total flux cleaned = -0.00220164 Jy
! Component: 200  -  total flux cleaned = -0.00297165 Jy
! Component: 250  -  total flux cleaned = -0.00355213 Jy
! Component: 300  -  total flux cleaned = -0.00407579 Jy
! Component: 350  -  total flux cleaned = -0.00454613 Jy
! Component: 400  -  total flux cleaned = -0.00500529 Jy
! Component: 450  -  total flux cleaned = -0.00541683 Jy
! Component: 500  -  total flux cleaned = -0.00589372 Jy
! Component: 550  -  total flux cleaned = -0.00625431 Jy
! Component: 600  -  total flux cleaned = -0.00667864 Jy
! Component: 650  -  total flux cleaned = -0.00706025 Jy
! Component: 700  -  total flux cleaned = -0.00743534 Jy
! Component: 750  -  total flux cleaned = -0.00790392 Jy
! Component: 800  -  total flux cleaned = -0.00829821 Jy
! Component: 850  -  total flux cleaned = -0.00858948 Jy
! Component: 900  -  total flux cleaned = -0.00893973 Jy
! Component: 950  -  total flux cleaned = -0.00912767 Jy
! Component: 1000  -  total flux cleaned = -0.00940572 Jy
! Component: 1050  -  total flux cleaned = -0.00955759 Jy
! Component: 1100  -  total flux cleaned = -0.0096473 Jy
! Component: 1150  -  total flux cleaned = -0.00976625 Jy
! Component: 1200  -  total flux cleaned = -0.0099418 Jy
! Component: 1250  -  total flux cleaned = -0.00999984 Jy
! Component: 1300  -  total flux cleaned = -0.0101713 Jy
! Component: 1350  -  total flux cleaned = -0.0102558 Jy
! Component: 1400  -  total flux cleaned = -0.0104237 Jy
! Component: 1450  -  total flux cleaned = -0.0104785 Jy
! Component: 1500  -  total flux cleaned = -0.0106146 Jy
! Component: 1550  -  total flux cleaned = -0.0107226 Jy
! Component: 1600  -  total flux cleaned = -0.0107759 Jy
! Component: 1650  -  total flux cleaned = -0.0109345 Jy
! Component: 1700  -  total flux cleaned = -0.0109868 Jy
! Component: 1750  -  total flux cleaned = -0.0111941 Jy
! Component: 1800  -  total flux cleaned = -0.011373 Jy
! Component: 1850  -  total flux cleaned = -0.0113986 Jy
! Component: 1900  -  total flux cleaned = -0.0115744 Jy
! Component: 1950  -  total flux cleaned = -0.011823 Jy
! Component: 2000  -  total flux cleaned = -0.0119462 Jy
! Component: 2050  -  total flux cleaned = -0.012117 Jy
! Component: 2100  -  total flux cleaned = -0.0123104 Jy
! Component: 2150  -  total flux cleaned = -0.0124539 Jy
! Component: 2200  -  total flux cleaned = -0.0126913 Jy
! Component: 2250  -  total flux cleaned = -0.012809 Jy
! Component: 2300  -  total flux cleaned = -0.0129022 Jy
! Component: 2350  -  total flux cleaned = -0.0131339 Jy
! Component: 2400  -  total flux cleaned = -0.0131569 Jy
! Component: 2450  -  total flux cleaned = -0.0133618 Jy
! Component: 2500  -  total flux cleaned = -0.013452 Jy
! Component: 2550  -  total flux cleaned = -0.0136987 Jy
! Component: 2600  -  total flux cleaned = -0.0138544 Jy
! Component: 2650  -  total flux cleaned = -0.0139648 Jy
! Component: 2700  -  total flux cleaned = -0.0140742 Jy
! Component: 2750  -  total flux cleaned = -0.0143131 Jy
! Component: 2800  -  total flux cleaned = -0.0143776 Jy
! Component: 2850  -  total flux cleaned = -0.0144419 Jy
! Component: 2900  -  total flux cleaned = -0.0146118 Jy
! Component: 2950  -  total flux cleaned = -0.0147593 Jy
! Component: 3000  -  total flux cleaned = -0.0149054 Jy
! Component: 3050  -  total flux cleaned = -0.0149886 Jy
! Component: 3100  -  total flux cleaned = -0.015174 Jy
! Component: 3150  -  total flux cleaned = -0.0152148 Jy
! Component: 3200  -  total flux cleaned = -0.0153976 Jy
! Component: 3250  -  total flux cleaned = -0.0154381 Jy
! Component: 3300  -  total flux cleaned = -0.0155185 Jy
! Component: 3350  -  total flux cleaned = -0.0156778 Jy
! Component: 3400  -  total flux cleaned = -0.0157371 Jy
! Component: 3450  -  total flux cleaned = -0.015894 Jy
! Component: 3500  -  total flux cleaned = -0.0160109 Jy
! Component: 3550  -  total flux cleaned = -0.0161463 Jy
! Component: 3600  -  total flux cleaned = -0.0162232 Jy
! Component: 3650  -  total flux cleaned = -0.0162425 Jy
! Component: 3700  -  total flux cleaned = -0.0163942 Jy
! Component: 3750  -  total flux cleaned = -0.0164509 Jy
! Component: 3800  -  total flux cleaned = -0.0165821 Jy
! Component: 3850  -  total flux cleaned = -0.0166564 Jy
! Component: 3900  -  total flux cleaned = -0.0167673 Jy
! Component: 3950  -  total flux cleaned = -0.0168038 Jy
! Component: 4000  -  total flux cleaned = -0.0168402 Jy
! Component: 4050  -  total flux cleaned = -0.0169671 Jy
! Total flux subtracted in 4096 components = -0.016985 Jy
! Clean residual min=-0.001077 max=0.000927 Jy/beam
! Clean residual mean=-0.000003 rms=0.000324 Jy/beam
! Combined flux in latest and established models = 0.377869 Jy
keep
! Adding 296 model components to the UV plane model.
! The established model now contains 435 components and 0.377869 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0203+8106_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.97 x 4.415 at -51.08 degrees (North through East)
! Clean map  min=-0.0028335  max=0.21846 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0203+8106_S_map.fits
wmodel /vlbi/uf001/uva//J0203+8106_S_map.mod
! Writing 435 model components to file: /vlbi/uf001/uva//J0203+8106_S_map.mod
wobs   /vlbi/uf001/uva//J0203+8106_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0203+8106_S_uvs.fits
wwins  /vlbi/uf001/uva//J0203+8106_S_map.win
! wwins: Wrote 5 windows to /vlbi/uf001/uva//J0203+8106_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.218458 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000322959 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.443508 0.443508 0.887016 1.77403 3.54806 7.09613 14.1923 28.3845 56.769
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.218 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  676.425 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0203+8106_S_dfm.log closed on Sun Jan 13 21:14:03 2019