! Started logfile: /vlbi/uf001/uvm//J0203+7232_X_a_dfm.log on Sun Jan 13 20:33:26 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uvm//J0203+7232_X_a_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J0203+7232_X_a_uvm.fits ! AN table 1: 4 integrations on 36 of 36 possible baselines. ! AN table 2: 13 integrations on 36 of 36 possible baselines. ! AN table 3: 14 integrations on 45 of 45 possible baselines. ! AN table 4: 15 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.781706 visibilities/baseline/integration-bin. ! Found source: J0203+7232 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 16716 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0203+7232_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 25 telescope corrections were flagged in sub-array 2. ! A total of 41 telescope corrections were flagged in sub-array 3. ! A total of 46 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 2. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 25 telescope corrections were flagged in sub-array 2. ! A total of 41 telescope corrections were flagged in sub-array 3. ! A total of 46 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 3. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 25 telescope corrections were flagged in sub-array 2. ! A total of 41 telescope corrections were flagged in sub-array 3. ! A total of 46 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 4. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 25 telescope corrections were flagged in sub-array 2. ! A total of 41 telescope corrections were flagged in sub-array 3. ! A total of 46 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 5. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 25 telescope corrections were flagged in sub-array 2. ! A total of 41 telescope corrections were flagged in sub-array 3. ! A total of 46 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 6. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 25 telescope corrections were flagged in sub-array 2. ! A total of 41 telescope corrections were flagged in sub-array 3. ! A total of 46 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 7. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 25 telescope corrections were flagged in sub-array 2. ! A total of 41 telescope corrections were flagged in sub-array 3. ! A total of 46 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 8. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 25 telescope corrections were flagged in sub-array 2. ! A total of 41 telescope corrections were flagged in sub-array 3. ! A total of 46 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 9. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 25 telescope corrections were flagged in sub-array 2. ! A total of 41 telescope corrections were flagged in sub-array 3. ! A total of 46 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 10. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 25 telescope corrections were flagged in sub-array 2. ! A total of 41 telescope corrections were flagged in sub-array 3. ! A total of 46 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 11. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 25 telescope corrections were flagged in sub-array 2. ! A total of 41 telescope corrections were flagged in sub-array 3. ! A total of 46 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 12. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 25 telescope corrections were flagged in sub-array 2. ! A total of 41 telescope corrections were flagged in sub-array 3. ! A total of 46 telescope corrections were flagged in sub-array 4. ! ! Fit before self-cal, rms=1.105511Jy sigma=21.279117 ! Fit after self-cal, rms=0.564246Jy sigma=10.828144 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7837 mas, bmaj=1 mas, bpa=24.33 degrees ! Estimated noise=0.468651 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.332122 Jy ! Component: 100 - total flux cleaned = 0.41774 Jy ! Total flux subtracted in 100 components = 0.41774 Jy ! Clean residual min=-0.010572 max=0.034156 Jy/beam ! Clean residual mean=0.000019 rms=0.002239 Jy/beam ! Combined flux in latest and established models = 0.41774 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.41774 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.104316Jy sigma=1.947104 ! Fit after self-cal, rms=0.104222Jy sigma=1.945750 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0346303 Jy ! Component: 100 - total flux cleaned = 0.0513932 Jy ! Total flux subtracted in 100 components = 0.0513932 Jy ! Clean residual min=-0.008400 max=0.013280 Jy/beam ! Clean residual mean=0.000014 rms=0.001850 Jy/beam ! Combined flux in latest and established models = 0.469133 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 10 components and 0.469133 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.090457Jy sigma=1.666222 ! Fit after self-cal, rms=0.090399Jy sigma=1.665539 ! Inverting map ! Added new window around map position (2, 0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.012354 Jy ! Component: 100 - total flux cleaned = 0.0198893 Jy ! Total flux subtracted in 100 components = 0.0198893 Jy ! Clean residual min=-0.008537 max=0.010512 Jy/beam ! Clean residual mean=0.000012 rms=0.001785 Jy/beam ! Combined flux in latest and established models = 0.489022 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 17 components and 0.489022 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088467Jy sigma=1.628197 ! Fit after self-cal, rms=0.088305Jy sigma=1.625100 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.003 mas, bmaj=1.309 mas, bpa=17.88 degrees ! Estimated noise=0.325212 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00716931 Jy ! Component: 100 - total flux cleaned = 0.0104268 Jy ! Component: 150 - total flux cleaned = 0.0109467 Jy ! Component: 200 - total flux cleaned = 0.0111268 Jy ! Total flux subtracted in 200 components = 0.0111268 Jy ! Clean residual min=-0.010368 max=0.008373 Jy/beam ! Clean residual mean=0.000036 rms=0.002022 Jy/beam ! Combined flux in latest and established models = 0.500149 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 25 components and 0.500149 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087686Jy sigma=1.613311 ! Fit after self-cal, rms=0.087586Jy sigma=1.611408 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.003 x 1.309 at 17.88 degrees (North through East) ! Clean map min=-0.0096118 max=0.43638 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 FD 1.19 HN 0.96 KP 1.14 ! LA 1.06 MK 1.16 NL 1.34 OV 1.05 ! PT 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.12 FD 1.12 HN 1.09 KP 1.05 ! LA 1.06 NL 0.98 OV 0.98 PT 0.95 ! SC 1.05 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 0.96 HN 0.93 KP 0.98 ! LA 0.94 MK 1.01 NL 1.10 OV 0.88 ! PT 0.86 SC 0.94 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.04 HN 0.96 KP 0.99 LA 0.99 ! MK 1.08 NL 1.09 OV 0.88 PT 0.90 ! SC 0.97 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.20 FD 1.15 HN 1.03 KP 1.18 ! LA 1.06 MK 1.18 NL 1.28 OV 1.04 ! PT 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.12 FD 1.12 HN 1.05 KP 1.08 ! LA 1.05 NL 1.00 OV 0.97 PT 0.93 ! SC 1.06 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 0.96 HN 0.92 KP 0.99 ! LA 0.94 MK 1.04 NL 1.08 OV 0.89 ! PT 0.87 SC 0.93 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.05 HN 0.95 KP 1.01 LA 0.99 ! MK 1.06 NL 1.12 OV 0.87 PT 0.88 ! SC 0.98 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 FD 1.15 HN 1.10 KP 1.18 ! LA 1.07 MK 1.09 NL 1.35 OV 1.06 ! PT 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.14 FD 1.12 HN 1.09 KP 1.05 ! LA 1.06 NL 0.99 OV 0.97 PT 0.93 ! SC 1.04 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 FD 0.97 HN 0.94 KP 0.98 ! LA 0.95 MK 1.03 NL 1.09 OV 0.88 ! PT 0.88 SC 0.92 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.04 HN 0.94 KP 0.98 LA 0.99 ! MK 1.06 NL 1.13 OV 0.88 PT 0.89 ! SC 0.95 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.20 HN 1.03 KP 1.20 ! LA 1.03 MK 1.12 NL 1.34 OV 1.05 ! PT 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.12 FD 1.12 HN 1.10 KP 1.05 ! LA 1.04 NL 1.01 OV 0.98 PT 0.92 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 0.97 HN 0.92 KP 0.98 ! LA 0.96 MK 1.03 NL 1.10 OV 0.87 ! PT 0.88 SC 0.93 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.03 HN 0.97 KP 0.98 LA 0.97 ! MK 1.05 NL 1.11 OV 0.88 PT 0.90 ! SC 0.98 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.19 FD 1.17 HN 0.94 KP 1.13 ! LA 1.10 MK 1.14 NL 1.30 OV 1.03 ! PT 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.13 FD 1.12 HN 1.12 KP 1.07 ! LA 1.05 NL 0.99 OV 0.99 PT 0.94 ! SC 1.04 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 0.95 HN 0.94 KP 0.97 ! LA 0.95 MK 1.01 NL 1.09 OV 0.89 ! PT 0.88 SC 0.94 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.05 HN 0.94 KP 0.97 LA 0.96 ! MK 1.06 NL 1.12 OV 0.90 PT 0.92 ! SC 0.98 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.21 FD 1.20 HN 1.00 KP 1.16 ! LA 1.05 MK 1.10 NL 1.26 OV 1.10 ! PT 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.13 FD 1.12 HN 1.11 KP 1.05 ! LA 1.07 NL 1.01 OV 0.98 PT 0.94 ! SC 1.04 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.04 FD 0.97 HN 0.94 KP 0.95 ! LA 0.95 MK 1.04 NL 1.09 OV 0.89 ! PT 0.86 SC 0.92 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.06 HN 0.95 KP 1.01 LA 0.96 ! MK 1.05 NL 1.11 OV 0.90 PT 0.90 ! SC 0.98 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.11 HN 1.00 KP 1.19 ! LA 1.05 MK 1.15 NL 1.30 OV 1.08 ! PT 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.16 FD 1.13 HN 1.12 KP 1.08 ! LA 1.06 NL 0.99 OV 0.98 PT 0.95 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 0.95 HN 0.94 KP 0.96 ! LA 0.96 MK 1.05 NL 1.11 OV 0.87 ! PT 0.87 SC 0.93 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.05 HN 0.98 KP 0.98 LA 0.98 ! MK 1.07 NL 1.12 OV 0.89 PT 0.90 ! SC 0.99 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.19 FD 1.16 HN 0.97 KP 1.19 ! LA 1.10 MK 1.19 NL 1.28 OV 1.00 ! PT 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.15 FD 1.10 HN 1.11 KP 1.08 ! LA 1.06 NL 0.99 OV 0.98 PT 0.96 ! SC 1.06 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.04 FD 0.97 HN 0.94 KP 0.98 ! LA 0.95 MK 1.02 NL 1.11 OV 0.87 ! PT 0.85 SC 0.93 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.05 HN 1.00 KP 1.01 LA 0.98 ! MK 1.09 NL 1.13 OV 0.89 PT 0.88 ! SC 0.98 ! ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.20 FD 1.16 HN 0.98 KP 1.23 ! LA 1.05 MK 1.24 NL 1.29 OV 0.99 ! PT 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.14 FD 1.13 HN 1.12 KP 1.08 ! LA 1.04 NL 1.00 OV 0.97 PT 0.94 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 FD 0.98 HN 0.95 KP 0.96 ! LA 0.95 MK 1.03 NL 1.09 OV 0.87 ! PT 0.87 SC 0.92 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.06 HN 0.97 KP 0.99 LA 0.98 ! MK 1.06 NL 1.12 OV 0.91 PT 0.91 ! SC 0.96 ! ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.19 HN 0.99 KP 1.14 ! LA 1.08 MK 1.19 NL 1.31 OV 1.03 ! PT 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.14 FD 1.12 HN 1.13 KP 1.08 ! LA 1.05 NL 1.00 OV 0.97 PT 0.94 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 FD 0.95 HN 0.91 KP 0.97 ! LA 0.97 MK 1.02 NL 1.11 OV 0.88 ! PT 0.88 SC 0.93 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.05 HN 0.98 KP 1.01 LA 0.99 ! MK 1.08 NL 1.12 OV 0.90 PT 0.92 ! SC 0.97 ! ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.29 FD 1.19 HN 0.96 KP 1.19 ! LA 1.04 MK 1.11 NL 1.22 OV 1.02 ! PT 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.18 FD 1.09 HN 1.09 KP 1.07 ! LA 1.05 NL 0.98 OV 0.98 PT 0.98 ! SC 1.07 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.05 FD 0.96 HN 0.93 KP 0.99 ! LA 0.95 MK 1.02 NL 1.08 OV 0.87 ! PT 0.88 SC 0.92 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.04 HN 0.97 KP 1.03 LA 0.98 ! MK 1.09 NL 1.10 OV 0.89 PT 0.93 ! SC 0.96 ! ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.22 FD 1.06 HN 0.97 KP 1.12 ! LA 1.06 MK 1.14 NL 1.27 OV 1.04 ! PT 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.13 FD 1.11 HN 1.06 KP 1.06 ! LA 1.04 NL 0.99 OV 0.98 PT 0.96 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 1.00 HN 0.93 KP 0.98 ! LA 0.95 MK 0.99 NL 1.09 OV 0.86 ! PT 0.88 SC 0.92 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.08 HN 0.95 KP 1.00 LA 0.99 ! MK 1.08 NL 1.10 OV 0.88 PT 0.94 ! SC 0.98 ! ! ! Fit before self-cal, rms=0.087586Jy sigma=1.611408 ! Fit after self-cal, rms=0.067719Jy sigma=1.187056 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.005 mas, bmaj=1.295 mas, bpa=18.04 degrees ! Estimated noise=0.325472 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000729043 Jy ! Component: 100 - total flux cleaned = 0.000716028 Jy ! Component: 150 - total flux cleaned = 0.000822609 Jy ! Component: 200 - total flux cleaned = 0.00092337 Jy ! Total flux subtracted in 200 components = 0.00092337 Jy ! Clean residual min=-0.003870 max=0.003567 Jy/beam ! Clean residual mean=-0.000004 rms=0.000710 Jy/beam ! Combined flux in latest and established models = 0.501073 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 34 components and 0.501073 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067292Jy sigma=1.176374 ! Fit after self-cal, rms=0.067298Jy sigma=1.175364 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067298Jy sigma=1.175364 ! Fit after self-cal, rms=0.064874Jy sigma=1.108118 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1 mas, bmaj=1.301 mas, bpa=18.55 degrees ! Estimated noise=0.326175 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00213273 Jy ! Component: 100 - total flux cleaned = 0.00198006 Jy ! Component: 150 - total flux cleaned = 0.00172187 Jy ! Component: 200 - total flux cleaned = 0.00155677 Jy ! Total flux subtracted in 200 components = 0.00155677 Jy ! Clean residual min=-0.002109 max=0.002603 Jy/beam ! Clean residual mean=-0.000002 rms=0.000441 Jy/beam ! Combined flux in latest and established models = 0.502629 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 43 components and 0.502629 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064684Jy sigma=1.104540 ! Fit after self-cal, rms=0.064657Jy sigma=1.104051 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5.4, 0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00191748 Jy ! Component: 100 - total flux cleaned = 0.00245355 Jy ! Component: 150 - total flux cleaned = 0.00268064 Jy ! Component: 200 - total flux cleaned = 0.00283294 Jy ! Total flux subtracted in 200 components = 0.00283294 Jy ! Clean residual min=-0.002057 max=0.002061 Jy/beam ! Clean residual mean=-0.000003 rms=0.000424 Jy/beam ! Combined flux in latest and established models = 0.505462 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 59 components and 0.505462 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064513Jy sigma=1.101296 ! Fit after self-cal, rms=0.064496Jy sigma=1.100992 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064496Jy sigma=1.100992 ! Fit after self-cal, rms=0.064415Jy sigma=1.100030 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9973 mas, bmaj=1.3 mas, bpa=18.38 degrees ! Estimated noise=0.326416 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00203975 Jy ! Component: 100 - total flux cleaned = 0.00238233 Jy ! Component: 150 - total flux cleaned = 0.00268442 Jy ! Component: 200 - total flux cleaned = 0.00286411 Jy ! Total flux subtracted in 200 components = 0.00286411 Jy ! Clean residual min=-0.002009 max=0.001966 Jy/beam ! Clean residual mean=-0.000003 rms=0.000405 Jy/beam ! Combined flux in latest and established models = 0.508326 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 60 components and 0.508326 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064303Jy sigma=1.097969 ! Fit after self-cal, rms=0.064289Jy sigma=1.097747 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00025195 Jy ! Component: 100 - total flux cleaned = 0.000384479 Jy ! Component: 150 - total flux cleaned = 0.000546228 Jy ! Component: 200 - total flux cleaned = 0.000622382 Jy ! Total flux subtracted in 200 components = 0.000622382 Jy ! Clean residual min=-0.001941 max=0.001908 Jy/beam ! Clean residual mean=-0.000003 rms=0.000400 Jy/beam ! Combined flux in latest and established models = 0.508949 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 62 components and 0.508949 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064235Jy sigma=1.096649 ! Fit after self-cal, rms=0.064230Jy sigma=1.096535 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064230Jy sigma=1.096535 ! Fit after self-cal, rms=0.064172Jy sigma=1.096060 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.288 mas, bmaj=2.84 mas, bpa=25.31 degrees ! Estimated noise=0.424373 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00201584 Jy ! Component: 100 - total flux cleaned = 0.00270551 Jy ! Component: 150 - total flux cleaned = 0.00286282 Jy ! Component: 200 - total flux cleaned = 0.00294081 Jy ! Total flux subtracted in 200 components = 0.00294081 Jy ! Clean residual min=-0.001804 max=0.002158 Jy/beam ! Clean residual mean=-0.000006 rms=0.000445 Jy/beam ! Combined flux in latest and established models = 0.511889 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 69 components and 0.511889 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064143Jy sigma=1.095680 ! Fit after self-cal, rms=0.064131Jy sigma=1.095438 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (8.8, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00142765 Jy ! Component: 100 - total flux cleaned = 0.00195795 Jy ! Component: 150 - total flux cleaned = 0.00236689 Jy ! Component: 200 - total flux cleaned = 0.00264069 Jy ! Total flux subtracted in 200 components = 0.00264069 Jy ! Clean residual min=-0.001668 max=0.001747 Jy/beam ! Clean residual mean=-0.000006 rms=0.000417 Jy/beam ! Combined flux in latest and established models = 0.51453 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 90 components and 0.51453 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064068Jy sigma=1.094189 ! Fit after self-cal, rms=0.064062Jy sigma=1.094078 ! Inverting map ! Added new window around map position (-8.8, 51). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00137734 Jy ! Component: 100 - total flux cleaned = 0.00184563 Jy ! Component: 150 - total flux cleaned = 0.00218933 Jy ! Component: 200 - total flux cleaned = 0.00247043 Jy ! Total flux subtracted in 200 components = 0.00247043 Jy ! Clean residual min=-0.001646 max=0.001521 Jy/beam ! Clean residual mean=-0.000005 rms=0.000400 Jy/beam ! Combined flux in latest and established models = 0.517001 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 113 components and 0.517001 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064033Jy sigma=1.093628 ! Fit after self-cal, rms=0.064032Jy sigma=1.093564 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9951 mas, bmaj=1.299 mas, bpa=18.22 degrees ! Estimated noise=0.326541 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9951 x 1.299 at 18.22 degrees (North through East) ! Clean map min=-0.0017737 max=0.43649 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7815 mas, bmaj=0.9997 mas, bpa=24.29 degrees ! Estimated noise=0.467367 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.331035 Jy ! Component: 100 - total flux cleaned = 0.417933 Jy ! Component: 150 - total flux cleaned = 0.453584 Jy ! Component: 200 - total flux cleaned = 0.471638 Jy ! Total flux subtracted in 200 components = 0.471638 Jy ! Clean residual min=-0.003977 max=0.009051 Jy/beam ! Clean residual mean=0.000005 rms=0.000785 Jy/beam ! Combined flux in latest and established models = 0.471638 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.471638 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9951 mas, bmaj=1.299 mas, bpa=18.22 degrees ! Estimated noise=0.326541 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0155759 Jy ! Component: 100 - total flux cleaned = 0.0239642 Jy ! Component: 150 - total flux cleaned = 0.0292104 Jy ! Component: 200 - total flux cleaned = 0.0329227 Jy ! Total flux subtracted in 200 components = 0.0329227 Jy ! Clean residual min=-0.002937 max=0.003735 Jy/beam ! Clean residual mean=-0.000001 rms=0.000442 Jy/beam ! Combined flux in latest and established models = 0.50456 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 35 components and 0.50456 Jy ! Inverting map ! Added new window around map position (1.4, -0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00352208 Jy ! Component: 100 - total flux cleaned = 0.00568811 Jy ! Component: 150 - total flux cleaned = 0.00711053 Jy ! Component: 200 - total flux cleaned = 0.0082896 Jy ! Total flux subtracted in 200 components = 0.0082896 Jy ! Clean residual min=-0.002666 max=0.001718 Jy/beam ! Clean residual mean=-0.000002 rms=0.000391 Jy/beam ! Combined flux in latest and established models = 0.51285 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 60 components and 0.51285 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.288 mas, bmaj=2.84 mas, bpa=25.31 degrees ! Estimated noise=0.424373 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00119255 Jy ! Component: 100 - total flux cleaned = 0.00204902 Jy ! Component: 150 - total flux cleaned = 0.00272639 Jy ! Component: 200 - total flux cleaned = 0.0031847 Jy ! Total flux subtracted in 200 components = 0.0031847 Jy ! Clean residual min=-0.001604 max=0.001510 Jy/beam ! Clean residual mean=-0.000005 rms=0.000409 Jy/beam ! Combined flux in latest and established models = 0.516035 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000453441 Jy ! Component: 100 - total flux cleaned = 0.00079087 Jy ! Component: 150 - total flux cleaned = 0.0011985 Jy ! Component: 200 - total flux cleaned = 0.00144689 Jy ! Total flux subtracted in 200 components = 0.00144689 Jy ! Clean residual min=-0.001592 max=0.001458 Jy/beam ! Clean residual mean=-0.000005 rms=0.000396 Jy/beam ! Combined flux in latest and established models = 0.517482 Jy ! Adding 70 model components to the UV plane model. ! The established model now contains 125 components and 0.517482 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9951 mas, bmaj=1.299 mas, bpa=18.22 degrees ! Estimated noise=0.326541 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000825262 Jy ! Component: 100 - total flux cleaned = 0.00127746 Jy ! Component: 150 - total flux cleaned = 0.00158922 Jy ! Component: 200 - total flux cleaned = 0.0016879 Jy ! Total flux subtracted in 200 components = 0.0016879 Jy ! Clean residual min=-0.002031 max=0.001736 Jy/beam ! Clean residual mean=-0.000002 rms=0.000368 Jy/beam ! Combined flux in latest and established models = 0.51917 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 139 components and 0.51917 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064006Jy sigma=1.093526 ! Fit after self-cal, rms=0.063968Jy sigma=1.092661 wmodel J0203+7232_X_a_map.mod ! Writing 139 model components to file: J0203+7232_X_a_map.mod wobs J0203+7232_X_a_uvs.fits ! Writing UV FITS file: J0203+7232_X_a_uvs.fits wwins J0203+7232_X_a_map.win ! wwins: Wrote 6 windows to J0203+7232_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000553742 Jy ! Component: 100 - total flux cleaned = -0.000522754 Jy ! Component: 150 - total flux cleaned = -0.000377146 Jy ! Component: 200 - total flux cleaned = -0.000294565 Jy ! Component: 250 - total flux cleaned = -8.31699e-05 Jy ! Component: 300 - total flux cleaned = 0.000123665 Jy ! Component: 350 - total flux cleaned = 0.000351508 Jy ! Component: 400 - total flux cleaned = 0.000500935 Jy ! Component: 450 - total flux cleaned = 0.000647892 Jy ! Component: 500 - total flux cleaned = 0.000768859 Jy ! Component: 550 - total flux cleaned = 0.000912111 Jy ! Component: 600 - total flux cleaned = 0.00103002 Jy ! Component: 650 - total flux cleaned = 0.00114653 Jy ! Component: 700 - total flux cleaned = 0.00119255 Jy ! Component: 750 - total flux cleaned = 0.00130698 Jy ! Component: 800 - total flux cleaned = 0.00135216 Jy ! Component: 850 - total flux cleaned = 0.0014644 Jy ! Component: 900 - total flux cleaned = 0.00150909 Jy ! Component: 950 - total flux cleaned = 0.00159721 Jy ! Component: 1000 - total flux cleaned = 0.00157549 Jy ! Component: 1050 - total flux cleaned = 0.0017057 Jy ! Component: 1100 - total flux cleaned = 0.00172726 Jy ! Component: 1150 - total flux cleaned = 0.00174855 Jy ! Component: 1200 - total flux cleaned = 0.00176984 Jy ! Component: 1250 - total flux cleaned = 0.00179073 Jy ! Component: 1300 - total flux cleaned = 0.00181156 Jy ! Component: 1350 - total flux cleaned = 0.00181163 Jy ! Component: 1400 - total flux cleaned = 0.00189472 Jy ! Component: 1450 - total flux cleaned = 0.00197733 Jy ! Component: 1500 - total flux cleaned = 0.00203882 Jy ! Component: 1550 - total flux cleaned = 0.00199816 Jy ! Component: 1600 - total flux cleaned = 0.00207927 Jy ! Component: 1650 - total flux cleaned = 0.00201898 Jy ! Component: 1700 - total flux cleaned = 0.00211921 Jy ! Component: 1750 - total flux cleaned = 0.00213932 Jy ! Component: 1800 - total flux cleaned = 0.0020798 Jy ! Component: 1850 - total flux cleaned = 0.00219811 Jy ! Component: 1900 - total flux cleaned = 0.00215881 Jy ! Component: 1950 - total flux cleaned = 0.00219788 Jy ! Component: 2000 - total flux cleaned = 0.00215884 Jy ! Component: 2050 - total flux cleaned = 0.00217805 Jy ! Component: 2100 - total flux cleaned = 0.00217829 Jy ! Component: 2150 - total flux cleaned = 0.00219754 Jy ! Component: 2200 - total flux cleaned = 0.0022358 Jy ! Component: 2250 - total flux cleaned = 0.00223575 Jy ! Component: 2300 - total flux cleaned = 0.00219788 Jy ! Component: 2350 - total flux cleaned = 0.00216017 Jy ! Component: 2400 - total flux cleaned = 0.00217891 Jy ! Component: 2450 - total flux cleaned = 0.00225358 Jy ! Component: 2500 - total flux cleaned = 0.00223507 Jy ! Component: 2550 - total flux cleaned = 0.00219799 Jy ! Component: 2600 - total flux cleaned = 0.00216112 Jy ! Component: 2650 - total flux cleaned = 0.00219793 Jy ! Component: 2700 - total flux cleaned = 0.00227096 Jy ! Component: 2750 - total flux cleaned = 0.00216144 Jy ! Component: 2800 - total flux cleaned = 0.00217967 Jy ! Component: 2850 - total flux cleaned = 0.00223384 Jy ! Component: 2900 - total flux cleaned = 0.00214368 Jy ! Component: 2950 - total flux cleaned = 0.0021617 Jy ! Component: 3000 - total flux cleaned = 0.00214368 Jy ! Component: 3050 - total flux cleaned = 0.00210797 Jy ! Component: 3100 - total flux cleaned = 0.00214346 Jy ! Component: 3150 - total flux cleaned = 0.00214333 Jy ! Component: 3200 - total flux cleaned = 0.00209044 Jy ! Component: 3250 - total flux cleaned = 0.00207298 Jy ! Component: 3300 - total flux cleaned = 0.0020554 Jy ! Component: 3350 - total flux cleaned = 0.0020554 Jy ! Component: 3400 - total flux cleaned = 0.00210755 Jy ! Component: 3450 - total flux cleaned = 0.00207293 Jy ! Component: 3500 - total flux cleaned = 0.00207294 Jy ! Component: 3550 - total flux cleaned = 0.00207288 Jy ! Component: 3600 - total flux cleaned = 0.00205566 Jy ! Component: 3650 - total flux cleaned = 0.00200443 Jy ! Component: 3700 - total flux cleaned = 0.00207251 Jy ! Component: 3750 - total flux cleaned = 0.00200461 Jy ! Component: 3800 - total flux cleaned = 0.0019369 Jy ! Component: 3850 - total flux cleaned = 0.00197052 Jy ! Component: 3900 - total flux cleaned = 0.00193678 Jy ! Component: 3950 - total flux cleaned = 0.00188653 Jy ! Component: 4000 - total flux cleaned = 0.00190333 Jy ! Component: 4050 - total flux cleaned = 0.00187019 Jy ! Total flux subtracted in 4096 components = 0.00180375 Jy ! Clean residual min=-0.000897 max=0.000975 Jy/beam ! Clean residual mean=-0.000000 rms=0.000283 Jy/beam ! Combined flux in latest and established models = 0.520974 Jy keep ! Adding 350 model components to the UV plane model. ! The established model now contains 487 components and 0.520973 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J0203+7232_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9951 x 1.299 at 18.22 degrees (North through East) ! Clean map min=-0.0014485 max=0.43628 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J0203+7232_X_a_map.fits wmodel /vlbi/uf001/uvm//J0203+7232_X_a_map.mod ! Writing 487 model components to file: /vlbi/uf001/uvm//J0203+7232_X_a_map.mod wobs /vlbi/uf001/uvm//J0203+7232_X_a_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J0203+7232_X_a_uvs.fits wwins /vlbi/uf001/uvm//J0203+7232_X_a_map.win ! wwins: Wrote 7 windows to /vlbi/uf001/uvm//J0203+7232_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.436283 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000282645 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.194354 0.194354 0.388708 0.777417 1.55483 3.10967 6.21933 12.4387 24.8773 49.7547 99.5093 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.436 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1543.57 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J0203+7232_X_a_dfm.log closed on Sun Jan 13 20:33:31 2019