! Started logfile: /vlbi/uf001/uva//J0201-1132_X_dfm.log on Sun Jan 13 21:12:40 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J0201-1132_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J0201-1132_X_uva.fits ! AN table 1: 28 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.950794 visibilities/baseline/integration-bin. ! Found source: J0201-1132 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 14376 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0201-1132_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.144743Jy sigma=21.317125 ! Fit after self-cal, rms=0.481261Jy sigma=9.144445 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6567 mas, bmaj=1.646 mas, bpa=-3.227 degrees ! Estimated noise=0.499446 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.391977 Jy ! Component: 100 - total flux cleaned = 0.5025 Jy ! Total flux subtracted in 100 components = 0.5025 Jy ! Clean residual min=-0.019585 max=0.044417 Jy/beam ! Clean residual mean=0.000009 rms=0.004725 Jy/beam ! Combined flux in latest and established models = 0.5025 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.5025 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.131087Jy sigma=2.284196 ! Fit after self-cal, rms=0.131014Jy sigma=2.282960 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0451534 Jy ! Component: 100 - total flux cleaned = 0.0669271 Jy ! Total flux subtracted in 100 components = 0.0669271 Jy ! Clean residual min=-0.018224 max=0.021967 Jy/beam ! Clean residual mean=0.000005 rms=0.003655 Jy/beam ! Combined flux in latest and established models = 0.569427 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 23 components and 0.569427 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.106502Jy sigma=1.872865 ! Fit after self-cal, rms=0.106468Jy sigma=1.872371 ! Inverting map ! Added new window around map position (-1.8, -0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0207503 Jy ! Component: 100 - total flux cleaned = 0.0336621 Jy ! Total flux subtracted in 100 components = 0.0336621 Jy ! Clean residual min=-0.017283 max=0.019728 Jy/beam ! Clean residual mean=0.000005 rms=0.003345 Jy/beam ! Combined flux in latest and established models = 0.603089 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 40 components and 0.603089 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.099429Jy sigma=1.754771 ! Fit after self-cal, rms=0.099010Jy sigma=1.746987 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8121 mas, bmaj=1.95 mas, bpa=-2.307 degrees ! Estimated noise=0.347827 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0195362 Jy ! Component: 100 - total flux cleaned = 0.0325787 Jy ! Component: 150 - total flux cleaned = 0.0419072 Jy ! Component: 200 - total flux cleaned = 0.048598 Jy ! Total flux subtracted in 200 components = 0.048598 Jy ! Clean residual min=-0.017000 max=0.025361 Jy/beam ! Clean residual mean=0.000002 rms=0.004659 Jy/beam ! Combined flux in latest and established models = 0.651687 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 52 components and 0.651687 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.093461Jy sigma=1.667588 ! Fit after self-cal, rms=0.093137Jy sigma=1.662228 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8121 x 1.95 at -2.307 degrees (North through East) ! Clean map min=-0.016178 max=0.51132 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 1.06 HN 1.00 KP 0.98 ! LA 0.97 MK 0.99 NL 1.11 OV 0.96 ! PT 0.86 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.05 HN 1.02 KP 0.98 ! LA 0.96 MK 1.01 NL 1.13 OV 0.96 ! PT 0.87 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 FD 1.05 HN 1.00 KP 0.98 ! LA 0.97 MK 1.02 NL 1.10 OV 0.94 ! PT 0.85 SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 1.06 HN 1.00 KP 0.97 ! LA 0.97 MK 1.00 NL 1.11 OV 0.96 ! PT 0.86 SC 0.99 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.06 HN 1.00 KP 0.99 ! LA 0.97 MK 1.00 NL 1.12 OV 0.96 ! PT 0.85 SC 0.98 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.06 HN 0.98 KP 0.98 ! LA 0.98 MK 0.99 NL 1.12 OV 0.96 ! PT 0.85 SC 0.97 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 1.05 HN 0.99 KP 0.98 ! LA 0.96 MK 1.01 NL 1.10 OV 0.95 ! PT 0.87 SC 0.98 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.04 HN 1.00 KP 0.98 ! LA 0.99 MK 1.02 NL 1.10 OV 0.94 ! PT 0.86 SC 0.98 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 1.04 HN 1.00 KP 0.97 ! LA 0.97 MK 0.99 NL 1.09 OV 0.95 ! PT 0.88 SC 0.98 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.06 HN 1.00 KP 0.97 ! LA 0.97 MK 1.01 NL 1.10 OV 0.95 ! PT 0.85 SC 0.97 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.05 HN 0.98 KP 0.98 ! LA 0.96 MK 1.01 NL 1.10 OV 0.94 ! PT 0.86 SC 0.99 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.04 HN 1.00 KP 1.00 ! LA 0.97 MK 1.01 NL 1.10 OV 0.96 ! PT 0.86 SC 0.98 ! ! ! Fit before self-cal, rms=0.093137Jy sigma=1.662228 ! Fit after self-cal, rms=0.071946Jy sigma=1.299726 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8107 mas, bmaj=1.968 mas, bpa=-2.077 degrees ! Estimated noise=0.348829 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.8, 3.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0153041 Jy ! Component: 100 - total flux cleaned = 0.0179587 Jy ! Component: 150 - total flux cleaned = 0.0193837 Jy ! Component: 200 - total flux cleaned = 0.0203093 Jy ! Total flux subtracted in 200 components = 0.0203093 Jy ! Clean residual min=-0.007023 max=0.013721 Jy/beam ! Clean residual mean=0.000003 rms=0.002187 Jy/beam ! Combined flux in latest and established models = 0.671996 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 84 components and 0.671996 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067559Jy sigma=1.221430 ! Fit after self-cal, rms=0.067451Jy sigma=1.218830 ! Inverting map ! Added new window around map position (-10.4, 18.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0142421 Jy ! Component: 100 - total flux cleaned = 0.0195096 Jy ! Component: 150 - total flux cleaned = 0.0207668 Jy ! Component: 200 - total flux cleaned = 0.0220199 Jy ! Total flux subtracted in 200 components = 0.0220199 Jy ! Clean residual min=-0.005955 max=0.008800 Jy/beam ! Clean residual mean=0.000002 rms=0.001622 Jy/beam ! Combined flux in latest and established models = 0.694016 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 118 components and 0.694016 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063902Jy sigma=1.153340 ! Fit after self-cal, rms=0.063752Jy sigma=1.150586 ! Inverting map ! Added new window around map position (-1.2, 10.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00813249 Jy ! Component: 100 - total flux cleaned = 0.0103595 Jy ! Component: 150 - total flux cleaned = 0.0121091 Jy ! Component: 200 - total flux cleaned = 0.0132058 Jy ! Total flux subtracted in 200 components = 0.0132058 Jy ! Clean residual min=-0.005189 max=0.006757 Jy/beam ! Clean residual mean=0.000002 rms=0.001390 Jy/beam ! Combined flux in latest and established models = 0.707222 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 137 components and 0.707222 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062382Jy sigma=1.124980 ! Fit after self-cal, rms=0.062349Jy sigma=1.124359 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062349Jy sigma=1.124359 ! Fit after self-cal, rms=0.060745Jy sigma=1.099655 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8107 mas, bmaj=1.967 mas, bpa=-1.902 degrees ! Estimated noise=0.347245 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000481028 Jy ! Component: 100 - total flux cleaned = 0.0018359 Jy ! Component: 150 - total flux cleaned = 0.00296109 Jy ! Component: 200 - total flux cleaned = 0.003502 Jy ! Total flux subtracted in 200 components = 0.003502 Jy ! Clean residual min=-0.004086 max=0.006281 Jy/beam ! Clean residual mean=0.000002 rms=0.001041 Jy/beam ! Combined flux in latest and established models = 0.710724 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 150 components and 0.710724 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060121Jy sigma=1.088228 ! Fit after self-cal, rms=0.060094Jy sigma=1.087700 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.2, 6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00557924 Jy ! Component: 100 - total flux cleaned = 0.00709822 Jy ! Component: 150 - total flux cleaned = 0.0078792 Jy ! Component: 200 - total flux cleaned = 0.00841328 Jy ! Total flux subtracted in 200 components = 0.00841328 Jy ! Clean residual min=-0.004072 max=0.004348 Jy/beam ! Clean residual mean=0.000004 rms=0.000908 Jy/beam ! Combined flux in latest and established models = 0.719137 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 170 components and 0.719137 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059479Jy sigma=1.077036 ! Fit after self-cal, rms=0.059455Jy sigma=1.076539 ! Inverting map ! Added new window around map position (-5.8, 8.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0030176 Jy ! Component: 100 - total flux cleaned = 0.00387443 Jy ! Component: 150 - total flux cleaned = 0.00395975 Jy ! Component: 200 - total flux cleaned = 0.00419682 Jy ! Total flux subtracted in 200 components = 0.00419682 Jy ! Clean residual min=-0.003653 max=0.003895 Jy/beam ! Clean residual mean=0.000005 rms=0.000831 Jy/beam ! Combined flux in latest and established models = 0.723334 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 187 components and 0.723334 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059134Jy sigma=1.070690 ! Fit after self-cal, rms=0.059126Jy sigma=1.070577 ! Inverting map ! Added new window around map position (-12.8, -32.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00330317 Jy ! Component: 100 - total flux cleaned = 0.00419039 Jy ! Component: 150 - total flux cleaned = 0.00448575 Jy ! Component: 200 - total flux cleaned = 0.0046954 Jy ! Total flux subtracted in 200 components = 0.0046954 Jy ! Clean residual min=-0.003383 max=0.003262 Jy/beam ! Clean residual mean=0.000005 rms=0.000767 Jy/beam ! Combined flux in latest and established models = 0.728029 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 200 components and 0.728029 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058873Jy sigma=1.065869 ! Fit after self-cal, rms=0.058870Jy sigma=1.065791 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058870Jy sigma=1.065791 ! Fit after self-cal, rms=0.058605Jy sigma=1.063666 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8104 mas, bmaj=1.966 mas, bpa=-1.865 degrees ! Estimated noise=0.346711 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.59933e-05 Jy ! Component: 100 - total flux cleaned = 0.000700488 Jy ! Component: 150 - total flux cleaned = 0.00128219 Jy ! Component: 200 - total flux cleaned = 0.00163738 Jy ! Total flux subtracted in 200 components = 0.00163738 Jy ! Clean residual min=-0.003093 max=0.002916 Jy/beam ! Clean residual mean=0.000004 rms=0.000691 Jy/beam ! Combined flux in latest and established models = 0.729667 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 211 components and 0.729667 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058429Jy sigma=1.060436 ! Fit after self-cal, rms=0.058422Jy sigma=1.060269 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.75969e-05 Jy ! Component: 100 - total flux cleaned = 0.000248545 Jy ! Component: 150 - total flux cleaned = 0.00040443 Jy ! Component: 200 - total flux cleaned = 0.000505065 Jy ! Total flux subtracted in 200 components = 0.000505065 Jy ! Clean residual min=-0.002991 max=0.002837 Jy/beam ! Clean residual mean=0.000004 rms=0.000669 Jy/beam ! Combined flux in latest and established models = 0.730172 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 217 components and 0.730172 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058336Jy sigma=1.058701 ! Fit after self-cal, rms=0.058335Jy sigma=1.058664 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058335Jy sigma=1.058664 ! Fit after self-cal, rms=0.058226Jy sigma=1.058065 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.096 mas, bmaj=3.814 mas, bpa=-0.6212 degrees ! Estimated noise=0.469161 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000111291 Jy ! Component: 100 - total flux cleaned = 0.0002809 Jy ! Component: 150 - total flux cleaned = 0.000598415 Jy ! Component: 200 - total flux cleaned = 0.000835842 Jy ! Total flux subtracted in 200 components = 0.000835842 Jy ! Clean residual min=-0.003285 max=0.003978 Jy/beam ! Clean residual mean=0.000010 rms=0.000997 Jy/beam ! Combined flux in latest and established models = 0.731008 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 234 components and 0.731008 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058182Jy sigma=1.057556 ! Fit after self-cal, rms=0.058174Jy sigma=1.057359 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000173477 Jy ! Component: 100 - total flux cleaned = 0.000527446 Jy ! Component: 150 - total flux cleaned = 0.000732588 Jy ! Component: 200 - total flux cleaned = 0.000886978 Jy ! Total flux subtracted in 200 components = 0.000886978 Jy ! Clean residual min=-0.003120 max=0.003819 Jy/beam ! Clean residual mean=0.000010 rms=0.000975 Jy/beam ! Combined flux in latest and established models = 0.731895 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 247 components and 0.731894 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058165Jy sigma=1.057292 ! Fit after self-cal, rms=0.058163Jy sigma=1.057236 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8102 mas, bmaj=1.966 mas, bpa=-1.847 degrees ! Estimated noise=0.346498 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8102 x 1.966 at -1.847 degrees (North through East) ! Clean map min=-0.0028547 max=0.51272 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058163Jy sigma=1.057236 ! Fit after self-cal, rms=0.054909Jy sigma=0.989007 ! Inverting map and beam ! Estimated beam: bmin=0.8107 mas, bmaj=1.967 mas, bpa=-1.891 degrees ! Estimated noise=0.346681 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00020272 Jy ! Component: 100 - total flux cleaned = -0.00041756 Jy ! Component: 150 - total flux cleaned = -0.000516763 Jy ! Component: 200 - total flux cleaned = -0.000607453 Jy ! Total flux subtracted in 200 components = -0.000607453 Jy ! Clean residual min=-0.003003 max=0.002554 Jy/beam ! Clean residual mean=0.000004 rms=0.000602 Jy/beam ! Combined flux in latest and established models = 0.731287 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 259 components and 0.731287 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054813Jy sigma=0.987223 ! Fit after self-cal, rms=0.054812Jy sigma=0.987151 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000194602 Jy ! Component: 100 - total flux cleaned = -0.000192766 Jy ! Component: 150 - total flux cleaned = -0.000193439 Jy ! Component: 200 - total flux cleaned = -0.000232815 Jy ! Total flux subtracted in 200 components = -0.000232815 Jy ! Clean residual min=-0.002913 max=0.002593 Jy/beam ! Clean residual mean=0.000004 rms=0.000590 Jy/beam ! Combined flux in latest and established models = 0.731054 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 271 components and 0.731054 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054757Jy sigma=0.986134 ! Fit after self-cal, rms=0.054757Jy sigma=0.986119 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054757Jy sigma=0.986119 ! Fit after self-cal, rms=0.054702Jy sigma=0.985926 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6554 mas, bmaj=1.656 mas, bpa=-2.703 degrees ! Estimated noise=0.498286 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.391216 Jy ! Component: 100 - total flux cleaned = 0.504905 Jy ! Component: 150 - total flux cleaned = 0.551516 Jy ! Component: 200 - total flux cleaned = 0.574451 Jy ! Total flux subtracted in 200 components = 0.574451 Jy ! Clean residual min=-0.007519 max=0.012363 Jy/beam ! Clean residual mean=0.000003 rms=0.002010 Jy/beam ! Combined flux in latest and established models = 0.574451 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.574451 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8106 mas, bmaj=1.967 mas, bpa=-1.879 degrees ! Estimated noise=0.346527 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0263056 Jy ! Component: 100 - total flux cleaned = 0.0455992 Jy ! Component: 150 - total flux cleaned = 0.0606307 Jy ! Component: 200 - total flux cleaned = 0.0726484 Jy ! Total flux subtracted in 200 components = 0.0726484 Jy ! Clean residual min=-0.005222 max=0.007918 Jy/beam ! Clean residual mean=0.000001 rms=0.001727 Jy/beam ! Combined flux in latest and established models = 0.6471 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 67 components and 0.6471 Jy ! Inverting map ! Added new window around map position (20, -29.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00990659 Jy ! Component: 100 - total flux cleaned = 0.0181194 Jy ! Component: 150 - total flux cleaned = 0.0250775 Jy ! Component: 200 - total flux cleaned = 0.0310572 Jy ! Total flux subtracted in 200 components = 0.0310572 Jy ! Clean residual min=-0.003849 max=0.005176 Jy/beam ! Clean residual mean=0.000002 rms=0.001100 Jy/beam ! Combined flux in latest and established models = 0.678157 Jy ! Adding 64 model components to the UV plane model. ! The established model now contains 112 components and 0.678157 Jy ! Inverting map ! Added new window around map position (7, -10.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00565422 Jy ! Component: 100 - total flux cleaned = 0.0101696 Jy ! Component: 150 - total flux cleaned = 0.014075 Jy ! Component: 200 - total flux cleaned = 0.017509 Jy ! Total flux subtracted in 200 components = 0.017509 Jy ! Clean residual min=-0.003124 max=0.003245 Jy/beam ! Clean residual mean=0.000003 rms=0.000806 Jy/beam ! Combined flux in latest and established models = 0.695666 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 151 components and 0.695666 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.097 mas, bmaj=3.814 mas, bpa=-0.6015 degrees ! Estimated noise=0.468854 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00593758 Jy ! Component: 100 - total flux cleaned = 0.0104249 Jy ! Component: 150 - total flux cleaned = 0.0140962 Jy ! Component: 200 - total flux cleaned = 0.0171966 Jy ! Total flux subtracted in 200 components = 0.0171966 Jy ! Clean residual min=-0.003445 max=0.003691 Jy/beam ! Clean residual mean=0.000009 rms=0.001075 Jy/beam ! Combined flux in latest and established models = 0.712862 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00264674 Jy ! Component: 100 - total flux cleaned = 0.00491708 Jy ! Component: 150 - total flux cleaned = 0.00687854 Jy ! Component: 200 - total flux cleaned = 0.00857732 Jy ! Total flux subtracted in 200 components = 0.00857732 Jy ! Clean residual min=-0.003003 max=0.002939 Jy/beam ! Clean residual mean=0.000009 rms=0.000899 Jy/beam ! Combined flux in latest and established models = 0.72144 Jy ! Adding 95 model components to the UV plane model. ! The established model now contains 223 components and 0.72144 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8106 mas, bmaj=1.967 mas, bpa=-1.879 degrees ! Estimated noise=0.346527 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0014558 Jy ! Component: 100 - total flux cleaned = 0.00209734 Jy ! Component: 150 - total flux cleaned = 0.00260395 Jy ! Component: 200 - total flux cleaned = 0.00306145 Jy ! Total flux subtracted in 200 components = 0.00306145 Jy ! Clean residual min=-0.002198 max=0.002211 Jy/beam ! Clean residual mean=0.000004 rms=0.000535 Jy/beam ! Combined flux in latest and established models = 0.724502 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 246 components and 0.724501 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054503Jy sigma=0.982368 ! Fit after self-cal, rms=0.054445Jy sigma=0.981241 wmodel J0201-1132_X_map.mod ! Writing 246 model components to file: J0201-1132_X_map.mod wobs J0201-1132_X_uvs.fits ! Writing UV FITS file: J0201-1132_X_uvs.fits wwins J0201-1132_X_map.win ! wwins: Wrote 10 windows to J0201-1132_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000494871 Jy ! Component: 100 - total flux cleaned = 0.000418174 Jy ! Component: 150 - total flux cleaned = 0.000278197 Jy ! Component: 200 - total flux cleaned = 0.000310817 Jy ! Component: 250 - total flux cleaned = 0.000278513 Jy ! Component: 300 - total flux cleaned = 0.00034194 Jy ! Component: 350 - total flux cleaned = 0.000402626 Jy ! Component: 400 - total flux cleaned = 0.000431787 Jy ! Component: 450 - total flux cleaned = 0.000460258 Jy ! Component: 500 - total flux cleaned = 0.000516423 Jy ! Component: 550 - total flux cleaned = 0.000516381 Jy ! Component: 600 - total flux cleaned = 0.000677148 Jy ! Component: 650 - total flux cleaned = 0.000729165 Jy ! Component: 700 - total flux cleaned = 0.000780704 Jy ! Component: 750 - total flux cleaned = 0.000856412 Jy ! Component: 800 - total flux cleaned = 0.000855676 Jy ! Component: 850 - total flux cleaned = 0.000880336 Jy ! Component: 900 - total flux cleaned = 0.000952667 Jy ! Component: 950 - total flux cleaned = 0.00100009 Jy ! Component: 1000 - total flux cleaned = 0.000976834 Jy ! Component: 1050 - total flux cleaned = 0.00102292 Jy ! Component: 1100 - total flux cleaned = 0.00104579 Jy ! Component: 1150 - total flux cleaned = 0.00106848 Jy ! Component: 1200 - total flux cleaned = 0.00109099 Jy ! Component: 1250 - total flux cleaned = 0.00115582 Jy ! Component: 1300 - total flux cleaned = 0.0012632 Jy ! Component: 1350 - total flux cleaned = 0.00132661 Jy ! Component: 1400 - total flux cleaned = 0.00138951 Jy ! Component: 1450 - total flux cleaned = 0.00149306 Jy ! Component: 1500 - total flux cleaned = 0.00163553 Jy ! Component: 1550 - total flux cleaned = 0.00167556 Jy ! Component: 1600 - total flux cleaned = 0.00171543 Jy ! Component: 1650 - total flux cleaned = 0.00179439 Jy ! Component: 1700 - total flux cleaned = 0.00187223 Jy ! Component: 1750 - total flux cleaned = 0.00198779 Jy ! Component: 1800 - total flux cleaned = 0.00213944 Jy ! Component: 1850 - total flux cleaned = 0.00219553 Jy ! Component: 1900 - total flux cleaned = 0.00225141 Jy ! Component: 1950 - total flux cleaned = 0.00230639 Jy ! Component: 2000 - total flux cleaned = 0.00239745 Jy ! Component: 2050 - total flux cleaned = 0.00252318 Jy ! Component: 2100 - total flux cleaned = 0.0025939 Jy ! Component: 2150 - total flux cleaned = 0.002664 Jy ! Component: 2200 - total flux cleaned = 0.00275083 Jy ! Component: 2250 - total flux cleaned = 0.00285396 Jy ! Component: 2300 - total flux cleaned = 0.00290502 Jy ! Component: 2350 - total flux cleaned = 0.00302315 Jy ! Component: 2400 - total flux cleaned = 0.0031064 Jy ! Component: 2450 - total flux cleaned = 0.00318893 Jy ! Component: 2500 - total flux cleaned = 0.00328693 Jy ! Component: 2550 - total flux cleaned = 0.00328697 Jy ! Component: 2600 - total flux cleaned = 0.00333487 Jy ! Component: 2650 - total flux cleaned = 0.00339848 Jy ! Component: 2700 - total flux cleaned = 0.00341417 Jy ! Component: 2750 - total flux cleaned = 0.00344548 Jy ! Component: 2800 - total flux cleaned = 0.00355337 Jy ! Component: 2850 - total flux cleaned = 0.00356859 Jy ! Component: 2900 - total flux cleaned = 0.00356843 Jy ! Component: 2950 - total flux cleaned = 0.00359831 Jy ! Component: 3000 - total flux cleaned = 0.00368766 Jy ! Component: 3050 - total flux cleaned = 0.00374661 Jy ! Component: 3100 - total flux cleaned = 0.00371744 Jy ! Component: 3150 - total flux cleaned = 0.00379024 Jy ! Component: 3200 - total flux cleaned = 0.00386206 Jy ! Component: 3250 - total flux cleaned = 0.0038763 Jy ! Component: 3300 - total flux cleaned = 0.00393292 Jy ! Component: 3350 - total flux cleaned = 0.00397484 Jy ! Component: 3400 - total flux cleaned = 0.00404457 Jy ! Component: 3450 - total flux cleaned = 0.00407233 Jy ! Component: 3500 - total flux cleaned = 0.00416786 Jy ! Component: 3550 - total flux cleaned = 0.00418139 Jy ! Component: 3600 - total flux cleaned = 0.00426214 Jy ! Component: 3650 - total flux cleaned = 0.00428883 Jy ! Component: 3700 - total flux cleaned = 0.00431553 Jy ! Component: 3750 - total flux cleaned = 0.00434198 Jy ! Component: 3800 - total flux cleaned = 0.00444639 Jy ! Component: 3850 - total flux cleaned = 0.00445939 Jy ! Component: 3900 - total flux cleaned = 0.00453675 Jy ! Component: 3950 - total flux cleaned = 0.00457513 Jy ! Component: 4000 - total flux cleaned = 0.00467673 Jy ! Component: 4050 - total flux cleaned = 0.00471441 Jy ! Total flux subtracted in 4096 components = 0.00473935 Jy ! Clean residual min=-0.000669 max=0.000703 Jy/beam ! Clean residual mean=0.000002 rms=0.000219 Jy/beam ! Combined flux in latest and established models = 0.729241 Jy keep ! Adding 339 model components to the UV plane model. ! The established model now contains 585 components and 0.729241 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J0201-1132_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8106 x 1.967 at -1.879 degrees (North through East) ! Clean map min=-0.0014023 max=0.51545 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J0201-1132_X_map.fits wmodel /vlbi/uf001/uva//J0201-1132_X_map.mod ! Writing 585 model components to file: /vlbi/uf001/uva//J0201-1132_X_map.mod wobs /vlbi/uf001/uva//J0201-1132_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J0201-1132_X_uvs.fits wwins /vlbi/uf001/uva//J0201-1132_X_map.win ! wwins: Wrote 11 windows to /vlbi/uf001/uva//J0201-1132_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.515452 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000217806 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.126766 0.126766 0.253532 0.507065 1.01413 2.02826 4.05652 8.11304 16.2261 32.4521 64.9043 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.515 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2366.56 quit ! Quitting program ! Log file /vlbi/uf001/uva//J0201-1132_X_dfm.log closed on Sun Jan 13 21:12:45 2019