! Started logfile: /vlbi/uf001/uva//J0155+2230_X_dfm.log on Sun Jan 13 21:10:37 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /vlbi/uf001/uva//J0155+2230_X_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0155+2230_X_uva.fits
! AN table 1: 72 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.917284 visibilities/baseline/integration-bin.
! Found source: J0155+2230
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 35664 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0155+2230_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.011744Jy  sigma=23.706416
! Fit after  self-cal, rms=0.892307Jy  sigma=20.915047
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6689 mas, bmaj=1.563 mas, bpa=-2.363 degrees
! Estimated noise=0.339378 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0786993 Jy
! Component: 100  -  total flux cleaned = 0.103695 Jy
! Total flux subtracted in 100 components = 0.103695 Jy
! Clean residual min=-0.004617 max=0.010738 Jy/beam
! Clean residual mean=0.000009 rms=0.000989 Jy/beam
! Combined flux in latest and established models = 0.103695 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.103695 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060883Jy  sigma=1.351872
! Fit after  self-cal, rms=0.060804Jy  sigma=1.349673
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0115213 Jy
! Component: 100  -  total flux cleaned = 0.0166257 Jy
! Total flux subtracted in 100 components = 0.0166257 Jy
! Clean residual min=-0.003931 max=0.006405 Jy/beam
! Clean residual mean=0.000004 rms=0.000774 Jy/beam
! Combined flux in latest and established models = 0.120321 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 8 components and 0.120321 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058032Jy  sigma=1.282328
! Fit after  self-cal, rms=0.058016Jy  sigma=1.281690
! Inverting map 
! Added new window around map position (2, 2.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00633505 Jy
! Component: 100  -  total flux cleaned = 0.0101872 Jy
! Total flux subtracted in 100 components = 0.0101872 Jy
! Clean residual min=-0.003787 max=0.003613 Jy/beam
! Clean residual mean=0.000003 rms=0.000685 Jy/beam
! Combined flux in latest and established models = 0.130508 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 27 components and 0.130508 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056882Jy  sigma=1.251058
! Fit after  self-cal, rms=0.056807Jy  sigma=1.249064
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8854 mas, bmaj=1.869 mas, bpa=-2.655 degrees
! Estimated noise=0.162188 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00610817 Jy
! Component: 100  -  total flux cleaned = 0.00997201 Jy
! Component: 150  -  total flux cleaned = 0.0126653 Jy
! Component: 200  -  total flux cleaned = 0.0146029 Jy
! Total flux subtracted in 200 components = 0.0146029 Jy
! Clean residual min=-0.002870 max=0.003570 Jy/beam
! Clean residual mean=0.000000 rms=0.000576 Jy/beam
! Combined flux in latest and established models = 0.145111 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 45 components and 0.145111 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056086Jy  sigma=1.229530
! Fit after  self-cal, rms=0.056029Jy  sigma=1.227944
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8854 x 1.869 at -2.655 degrees (North through East)
! Clean map  min=-0.0026571  max=0.10624 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        0.99     HN        1.01     KP        1.02     
!   LA        1.02     MK        1.00     NL        1.13     OV        0.91     
!   PT        0.92     SC        0.96     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.01     HN        1.02     KP        1.01     
!   LA        1.01     MK        1.02     NL        1.10     OV        0.92     
!   PT        0.93     SC        0.97     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.00     HN        1.05     KP        1.02     
!   LA        1.03     MK        1.01     NL        1.13     OV        0.90     
!   PT        0.94     SC        0.93     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.01     HN        1.01     KP        1.02     
!   LA        1.01     MK        1.04     NL        1.10     OV        0.90     
!   PT        0.95     SC        0.96     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.01     HN        1.03     KP        1.03     
!   LA        0.99     MK        0.99     NL        1.14     OV        0.92     
!   PT        0.93     SC        0.98     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.98     HN        1.04     KP        1.00     
!   LA        1.02     MK        1.00     NL        1.14     OV        0.92     
!   PT        0.95     SC        0.95     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.01     HN        1.05     KP        0.99     
!   LA        1.01     MK        0.98     NL        1.13     OV        0.91     
!   PT        0.93     SC        0.97     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.03     HN        1.04     KP        1.02     
!   LA        1.01     MK        1.00     NL        1.10     OV        0.89     
!   PT        0.92     SC        0.96     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.99     HN        0.99     KP        0.99     
!   LA        1.01     MK        0.98     NL        1.11     OV        0.91     
!   PT        0.97     SC        0.95     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.00     HN        0.98     KP        1.03     
!   LA        1.00     MK        1.00     NL        1.15     OV        0.91     
!   PT        0.90     SC        0.99     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.98     HN        1.02     KP        1.01     
!   LA        0.98     MK        1.05     NL        1.12     OV        0.91     
!   PT        0.96     SC        0.95     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.00     HN        1.05     KP        1.00     
!   LA        1.01     MK        0.97     NL        1.08     OV        0.92     
!   PT        0.94     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.056029Jy  sigma=1.227944
! Fit after  self-cal, rms=0.055189Jy  sigma=1.207578
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8829 mas, bmaj=1.878 mas, bpa=-2.068 degrees
! Estimated noise=0.162043 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (8.4, -5.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000316733 Jy
! Component: 100  -  total flux cleaned = 0.000218801 Jy
! Component: 150  -  total flux cleaned = 0.000220096 Jy
! Component: 200  -  total flux cleaned = 0.000183584 Jy
! Total flux subtracted in 200 components = 0.000183584 Jy
! Clean residual min=-0.001610 max=0.001428 Jy/beam
! Clean residual mean=0.000001 rms=0.000292 Jy/beam
! Combined flux in latest and established models = 0.145294 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 61 components and 0.145294 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055101Jy  sigma=1.206006
! Fit after  self-cal, rms=0.055126Jy  sigma=1.205646
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055126Jy  sigma=1.205646
! Fit after  self-cal, rms=0.055392Jy  sigma=1.198238
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8832 mas, bmaj=1.866 mas, bpa=-2.198 degrees
! Estimated noise=0.162258 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000274966 Jy
! Component: 100  -  total flux cleaned = -0.000369155 Jy
! Component: 150  -  total flux cleaned = -0.00045396 Jy
! Component: 200  -  total flux cleaned = -0.000510568 Jy
! Total flux subtracted in 200 components = -0.000510568 Jy
! Clean residual min=-0.000959 max=0.000964 Jy/beam
! Clean residual mean=0.000000 rms=0.000197 Jy/beam
! Combined flux in latest and established models = 0.144784 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 72 components and 0.144784 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055370Jy  sigma=1.197757
! Fit after  self-cal, rms=0.055376Jy  sigma=1.197649
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.2, 23.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000744319 Jy
! Component: 100  -  total flux cleaned = 0.000836757 Jy
! Component: 150  -  total flux cleaned = 0.00085487 Jy
! Component: 200  -  total flux cleaned = 0.000871622 Jy
! Total flux subtracted in 200 components = 0.000871622 Jy
! Clean residual min=-0.000843 max=0.000764 Jy/beam
! Clean residual mean=-0.000000 rms=0.000188 Jy/beam
! Combined flux in latest and established models = 0.145655 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 90 components and 0.145655 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055356Jy  sigma=1.197184
! Fit after  self-cal, rms=0.055353Jy  sigma=1.197166
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055353Jy  sigma=1.197166
! Fit after  self-cal, rms=0.055584Jy  sigma=1.197056
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8823 mas, bmaj=1.865 mas, bpa=-2.132 degrees
! Estimated noise=0.162357 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.53849e-05 Jy
! Component: 100  -  total flux cleaned = 0.000119883 Jy
! Component: 150  -  total flux cleaned = 0.000120017 Jy
! Component: 200  -  total flux cleaned = 0.00010524 Jy
! Total flux subtracted in 200 components = 0.00010524 Jy
! Clean residual min=-0.000834 max=0.000738 Jy/beam
! Clean residual mean=-0.000000 rms=0.000183 Jy/beam
! Combined flux in latest and established models = 0.145761 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 97 components and 0.145761 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055573Jy  sigma=1.196833
! Fit after  self-cal, rms=0.055574Jy  sigma=1.196819
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.04826e-05 Jy
! Component: 100  -  total flux cleaned = 1.62836e-05 Jy
! Component: 150  -  total flux cleaned = 2.9664e-05 Jy
! Component: 200  -  total flux cleaned = 4.21861e-05 Jy
! Total flux subtracted in 200 components = 4.21861e-05 Jy
! Clean residual min=-0.000801 max=0.000745 Jy/beam
! Clean residual mean=-0.000000 rms=0.000181 Jy/beam
! Combined flux in latest and established models = 0.145803 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 102 components and 0.145803 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055568Jy  sigma=1.196684
! Fit after  self-cal, rms=0.055567Jy  sigma=1.196676
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055567Jy  sigma=1.196676
! Fit after  self-cal, rms=0.055638Jy  sigma=1.196656
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.134 mas, bmaj=2.894 mas, bpa=-6.321 degrees
! Estimated noise=0.205642 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000298557 Jy
! Component: 100  -  total flux cleaned = -0.000300869 Jy
! Component: 150  -  total flux cleaned = -0.000283617 Jy
! Component: 200  -  total flux cleaned = -0.000253024 Jy
! Total flux subtracted in 200 components = -0.000253024 Jy
! Clean residual min=-0.000838 max=0.000832 Jy/beam
! Clean residual mean=0.000000 rms=0.000214 Jy/beam
! Combined flux in latest and established models = 0.14555 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 116 components and 0.14555 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055638Jy  sigma=1.196632
! Fit after  self-cal, rms=0.055638Jy  sigma=1.196626
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.53826e-05 Jy
! Component: 100  -  total flux cleaned = -5.53078e-05 Jy
! Component: 150  -  total flux cleaned = -6.16839e-05 Jy
! Component: 200  -  total flux cleaned = -4.96045e-05 Jy
! Total flux subtracted in 200 components = -4.96045e-05 Jy
! Clean residual min=-0.000837 max=0.000817 Jy/beam
! Clean residual mean=0.000000 rms=0.000212 Jy/beam
! Combined flux in latest and established models = 0.1455 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 124 components and 0.1455 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055638Jy  sigma=1.196620
! Fit after  self-cal, rms=0.055638Jy  sigma=1.196615
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8818 mas, bmaj=1.865 mas, bpa=-2.088 degrees
! Estimated noise=0.162413 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8818 x 1.865 at -2.088 degrees (North through East)
! Clean map  min=-0.00074523  max=0.10612 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6658 mas, bmaj=1.556 mas, bpa=-1.856 degrees
! Estimated noise=0.337631 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.078129 Jy
! Component: 100  -  total flux cleaned = 0.103841 Jy
! Component: 150  -  total flux cleaned = 0.115462 Jy
! Component: 200  -  total flux cleaned = 0.122089 Jy
! Total flux subtracted in 200 components = 0.122089 Jy
! Clean residual min=-0.002153 max=0.003549 Jy/beam
! Clean residual mean=0.000004 rms=0.000532 Jy/beam
! Combined flux in latest and established models = 0.122089 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.122089 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8818 mas, bmaj=1.865 mas, bpa=-2.088 degrees
! Estimated noise=0.162413 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00756786 Jy
! Component: 100  -  total flux cleaned = 0.012106 Jy
! Component: 150  -  total flux cleaned = 0.0150684 Jy
! Component: 200  -  total flux cleaned = 0.017098 Jy
! Total flux subtracted in 200 components = 0.017098 Jy
! Clean residual min=-0.001070 max=0.001475 Jy/beam
! Clean residual mean=0.000001 rms=0.000237 Jy/beam
! Combined flux in latest and established models = 0.139187 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 37 components and 0.139187 Jy
! Inverting map 
! Added new window around map position (0.8, 2.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00153074 Jy
! Component: 100  -  total flux cleaned = 0.00262111 Jy
! Component: 150  -  total flux cleaned = 0.00349001 Jy
! Component: 200  -  total flux cleaned = 0.0042092 Jy
! Total flux subtracted in 200 components = 0.0042092 Jy
! Clean residual min=-0.000890 max=0.000796 Jy/beam
! Clean residual mean=0.000000 rms=0.000190 Jy/beam
! Combined flux in latest and established models = 0.143396 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 62 components and 0.143396 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.134 mas, bmaj=2.894 mas, bpa=-6.321 degrees
! Estimated noise=0.205642 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000898777 Jy
! Component: 100  -  total flux cleaned = 0.00127114 Jy
! Component: 150  -  total flux cleaned = 0.00157382 Jy
! Component: 200  -  total flux cleaned = 0.00180754 Jy
! Total flux subtracted in 200 components = 0.00180754 Jy
! Clean residual min=-0.000864 max=0.000829 Jy/beam
! Clean residual mean=0.000000 rms=0.000214 Jy/beam
! Combined flux in latest and established models = 0.145204 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000140691 Jy
! Component: 100  -  total flux cleaned = 0.000210027 Jy
! Component: 150  -  total flux cleaned = 0.000262078 Jy
! Component: 200  -  total flux cleaned = 0.000285866 Jy
! Total flux subtracted in 200 components = 0.000285866 Jy
! Clean residual min=-0.000873 max=0.000825 Jy/beam
! Clean residual mean=0.000000 rms=0.000210 Jy/beam
! Combined flux in latest and established models = 0.14549 Jy
! Adding 57 model components to the UV plane model.
! The established model now contains 113 components and 0.14549 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8818 mas, bmaj=1.865 mas, bpa=-2.088 degrees
! Estimated noise=0.162413 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000178354 Jy
! Component: 100  -  total flux cleaned = -0.000162714 Jy
! Component: 150  -  total flux cleaned = -0.000114689 Jy
! Component: 200  -  total flux cleaned = -8.50652e-05 Jy
! Total flux subtracted in 200 components = -8.50652e-05 Jy
! Clean residual min=-0.000769 max=0.000739 Jy/beam
! Clean residual mean=-0.000000 rms=0.000176 Jy/beam
! Combined flux in latest and established models = 0.145405 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 126 components and 0.145405 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055630Jy  sigma=1.196534
! Fit after  self-cal, rms=0.055626Jy  sigma=1.196488
wmodel J0155+2230_X_map.mod
! Writing 126 model components to file: J0155+2230_X_map.mod
wobs   J0155+2230_X_uvs.fits
! Writing UV FITS file: J0155+2230_X_uvs.fits
wwins  J0155+2230_X_map.win
! wwins: Wrote 5 windows to J0155+2230_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -8.1795e-05 Jy
! Component: 100  -  total flux cleaned = -0.000211955 Jy
! Component: 150  -  total flux cleaned = -0.000261648 Jy
! Component: 200  -  total flux cleaned = -0.000261906 Jy
! Component: 250  -  total flux cleaned = -0.000297026 Jy
! Component: 300  -  total flux cleaned = -0.000308584 Jy
! Component: 350  -  total flux cleaned = -0.000342649 Jy
! Component: 400  -  total flux cleaned = -0.00038702 Jy
! Component: 450  -  total flux cleaned = -0.000397818 Jy
! Component: 500  -  total flux cleaned = -0.000419203 Jy
! Component: 550  -  total flux cleaned = -0.000461445 Jy
! Component: 600  -  total flux cleaned = -0.000503046 Jy
! Component: 650  -  total flux cleaned = -0.000533584 Jy
! Component: 700  -  total flux cleaned = -0.00055371 Jy
! Component: 750  -  total flux cleaned = -0.000553707 Jy
! Component: 800  -  total flux cleaned = -0.000553833 Jy
! Component: 850  -  total flux cleaned = -0.000554148 Jy
! Component: 900  -  total flux cleaned = -0.000602115 Jy
! Component: 950  -  total flux cleaned = -0.000582966 Jy
! Component: 1000  -  total flux cleaned = -0.000582928 Jy
! Component: 1050  -  total flux cleaned = -0.000592283 Jy
! Component: 1100  -  total flux cleaned = -0.000610792 Jy
! Component: 1150  -  total flux cleaned = -0.000638085 Jy
! Component: 1200  -  total flux cleaned = -0.000656104 Jy
! Component: 1250  -  total flux cleaned = -0.000674146 Jy
! Component: 1300  -  total flux cleaned = -0.00069176 Jy
! Component: 1350  -  total flux cleaned = -0.000656374 Jy
! Component: 1400  -  total flux cleaned = -0.000665248 Jy
! Component: 1450  -  total flux cleaned = -0.000682562 Jy
! Component: 1500  -  total flux cleaned = -0.000673884 Jy
! Component: 1550  -  total flux cleaned = -0.000673835 Jy
! Component: 1600  -  total flux cleaned = -0.00066542 Jy
! Component: 1650  -  total flux cleaned = -0.000682227 Jy
! Component: 1700  -  total flux cleaned = -0.000707216 Jy
! Component: 1750  -  total flux cleaned = -0.000715567 Jy
! Component: 1800  -  total flux cleaned = -0.000740128 Jy
! Component: 1850  -  total flux cleaned = -0.000756432 Jy
! Component: 1900  -  total flux cleaned = -0.000780738 Jy
! Component: 1950  -  total flux cleaned = -0.000796875 Jy
! Component: 2000  -  total flux cleaned = -0.00083686 Jy
! Component: 2050  -  total flux cleaned = -0.000820984 Jy
! Component: 2100  -  total flux cleaned = -0.000844622 Jy
! Component: 2150  -  total flux cleaned = -0.000852537 Jy
! Component: 2200  -  total flux cleaned = -0.000875914 Jy
! Component: 2250  -  total flux cleaned = -0.000883773 Jy
! Component: 2300  -  total flux cleaned = -0.000914638 Jy
! Component: 2350  -  total flux cleaned = -0.000937656 Jy
! Component: 2400  -  total flux cleaned = -0.000952884 Jy
! Component: 2450  -  total flux cleaned = -0.000990665 Jy
! Component: 2500  -  total flux cleaned = -0.000998269 Jy
! Component: 2550  -  total flux cleaned = -0.00100575 Jy
! Component: 2600  -  total flux cleaned = -0.00106533 Jy
! Component: 2650  -  total flux cleaned = -0.00106533 Jy
! Component: 2700  -  total flux cleaned = -0.00110211 Jy
! Component: 2750  -  total flux cleaned = -0.00112403 Jy
! Component: 2800  -  total flux cleaned = -0.00113848 Jy
! Component: 2850  -  total flux cleaned = -0.00113845 Jy
! Component: 2900  -  total flux cleaned = -0.00118163 Jy
! Component: 2950  -  total flux cleaned = -0.00119597 Jy
! Component: 3000  -  total flux cleaned = -0.00119598 Jy
! Component: 3050  -  total flux cleaned = -0.0012385 Jy
! Component: 3100  -  total flux cleaned = -0.00127366 Jy
! Component: 3150  -  total flux cleaned = -0.00125964 Jy
! Component: 3200  -  total flux cleaned = -0.00126656 Jy
! Component: 3250  -  total flux cleaned = -0.00129426 Jy
! Component: 3300  -  total flux cleaned = -0.00133568 Jy
! Component: 3350  -  total flux cleaned = -0.00134937 Jy
! Component: 3400  -  total flux cleaned = -0.00135626 Jy
! Component: 3450  -  total flux cleaned = -0.00137665 Jy
! Component: 3500  -  total flux cleaned = -0.00139691 Jy
! Component: 3550  -  total flux cleaned = -0.00140366 Jy
! Component: 3600  -  total flux cleaned = -0.00141699 Jy
! Component: 3650  -  total flux cleaned = -0.00143035 Jy
! Component: 3700  -  total flux cleaned = -0.00143034 Jy
! Component: 3750  -  total flux cleaned = -0.00145671 Jy
! Component: 3800  -  total flux cleaned = -0.0014896 Jy
! Component: 3850  -  total flux cleaned = -0.00149603 Jy
! Component: 3900  -  total flux cleaned = -0.00148292 Jy
! Component: 3950  -  total flux cleaned = -0.00150235 Jy
! Component: 4000  -  total flux cleaned = -0.00150878 Jy
! Component: 4050  -  total flux cleaned = -0.00149588 Jy
! Total flux subtracted in 4096 components = -0.00150228 Jy
! Clean residual min=-0.000343 max=0.000396 Jy/beam
! Clean residual mean=0.000000 rms=0.000111 Jy/beam
! Combined flux in latest and established models = 0.143902 Jy
keep
! Adding 338 model components to the UV plane model.
! The established model now contains 464 components and 0.143902 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0155+2230_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8818 x 1.865 at -2.088 degrees (North through East)
! Clean map  min=-0.00055277  max=0.10611 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0155+2230_X_map.fits
wmodel /vlbi/uf001/uva//J0155+2230_X_map.mod
! Writing 464 model components to file: /vlbi/uf001/uva//J0155+2230_X_map.mod
wobs   /vlbi/uf001/uva//J0155+2230_X_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0155+2230_X_uvs.fits
wwins  /vlbi/uf001/uva//J0155+2230_X_map.win
! wwins: Wrote 6 windows to /vlbi/uf001/uva//J0155+2230_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.106107 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000110921 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.313611 0.313611 0.627223 1.25445 2.50889 5.01778 10.0356 20.0711 40.1423 80.2845
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.106 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  956.597 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0155+2230_X_dfm.log closed on Sun Jan 13 21:10:43 2019