! Started logfile: /vlbi/uf001/uvm//J0154+4743_X_a_dfm.log on Sun Jan 13 20:32:30 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uvm//J0154+4743_X_a_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J0154+4743_X_a_uvm.fits ! AN table 1: 24 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.780556 visibilities/baseline/integration-bin. ! Found source: J0154+4743 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 10116 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0154+4743_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.104601Jy sigma=22.445600 ! Fit after self-cal, rms=0.538514Jy sigma=11.076756 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7036 mas, bmaj=1.321 mas, bpa=-2.362 degrees ! Estimated noise=0.569034 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.358943 Jy ! Component: 100 - total flux cleaned = 0.438934 Jy ! Total flux subtracted in 100 components = 0.438934 Jy ! Clean residual min=-0.012565 max=0.027037 Jy/beam ! Clean residual mean=-0.000000 rms=0.002570 Jy/beam ! Combined flux in latest and established models = 0.438934 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.438934 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088251Jy sigma=1.766644 ! Fit after self-cal, rms=0.088244Jy sigma=1.766554 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0276711 Jy ! Component: 100 - total flux cleaned = 0.0409862 Jy ! Total flux subtracted in 100 components = 0.0409862 Jy ! Clean residual min=-0.013185 max=0.019464 Jy/beam ! Clean residual mean=-0.000005 rms=0.002220 Jy/beam ! Combined flux in latest and established models = 0.47992 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 14 components and 0.47992 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077449Jy sigma=1.573122 ! Fit after self-cal, rms=0.077429Jy sigma=1.572868 ! Inverting map ! Added new window around map position (-0.2, -2.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0157324 Jy ! Component: 100 - total flux cleaned = 0.0205155 Jy ! Total flux subtracted in 100 components = 0.0205155 Jy ! Clean residual min=-0.011623 max=0.014620 Jy/beam ! Clean residual mean=-0.000006 rms=0.002063 Jy/beam ! Combined flux in latest and established models = 0.500436 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 23 components and 0.500436 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074617Jy sigma=1.516694 ! Fit after self-cal, rms=0.074345Jy sigma=1.511188 ! Inverting map ! Added new window around map position (1.6, 1.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0127025 Jy ! Component: 100 - total flux cleaned = 0.0193537 Jy ! Total flux subtracted in 100 components = 0.0193537 Jy ! Clean residual min=-0.010872 max=0.012501 Jy/beam ! Clean residual mean=-0.000008 rms=0.001925 Jy/beam ! Combined flux in latest and established models = 0.519789 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 38 components and 0.519789 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072034Jy sigma=1.459748 ! Fit after self-cal, rms=0.071771Jy sigma=1.454804 ! Inverting map ! Added new window around map position (0.2, 2.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00958434 Jy ! Component: 100 - total flux cleaned = 0.0120665 Jy ! Total flux subtracted in 100 components = 0.0120665 Jy ! Clean residual min=-0.010386 max=0.010211 Jy/beam ! Clean residual mean=-0.000009 rms=0.001827 Jy/beam ! Combined flux in latest and established models = 0.531856 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 43 components and 0.531856 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070828Jy sigma=1.433589 ! Fit after self-cal, rms=0.070712Jy sigma=1.431433 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8975 mas, bmaj=1.536 mas, bpa=6.648 degrees ! Estimated noise=0.3882 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00284125 Jy ! Component: 100 - total flux cleaned = 0.00321635 Jy ! Component: 150 - total flux cleaned = 0.00352641 Jy ! Component: 200 - total flux cleaned = 0.00366387 Jy ! Total flux subtracted in 200 components = 0.00366387 Jy ! Clean residual min=-0.009841 max=0.010559 Jy/beam ! Clean residual mean=-0.000026 rms=0.001933 Jy/beam ! Combined flux in latest and established models = 0.53552 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 57 components and 0.53552 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070006Jy sigma=1.414533 ! Fit after self-cal, rms=0.069958Jy sigma=1.413874 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8975 x 1.536 at 6.648 degrees (North through East) ! Clean map min=-0.0092269 max=0.45837 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.01 HN 0.94 KP 1.05 ! LA 1.00 MK 1.01 NL 1.11 OV 0.92 ! PT 0.94 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.01 HN 0.96 KP 1.05 ! LA 1.00 MK 0.99 NL 1.10 OV 0.92 ! PT 0.94 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.03 HN 0.97 KP 1.05 ! LA 1.02 MK 1.02 NL 1.10 OV 0.91 ! PT 0.94 SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.03 HN 0.94 KP 1.07 ! LA 1.00 MK 1.02 NL 1.11 OV 0.92 ! PT 0.94 SC 1.00 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.03 HN 0.95 KP 1.06 ! LA 1.00 MK 1.00 NL 1.10 OV 0.92 ! PT 0.94 SC 0.99 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.01 HN 0.96 KP 1.05 ! LA 1.01 MK 1.01 NL 1.10 OV 0.92 ! PT 0.95 SC 0.99 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.02 HN 0.95 KP 1.06 ! LA 0.99 MK 1.01 NL 1.12 OV 0.91 ! PT 0.94 SC 0.99 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.01 HN 0.95 KP 1.04 ! LA 1.01 MK 1.01 NL 1.12 OV 0.93 ! PT 0.94 SC 0.98 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.03 HN 0.95 KP 1.05 ! LA 1.00 MK 1.02 NL 1.12 OV 0.93 ! PT 0.94 SC 1.00 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.03 HN 0.96 KP 1.04 ! LA 1.01 MK 1.01 NL 1.10 OV 0.91 ! PT 0.93 SC 0.98 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00 HN 0.97 KP 1.06 ! LA 1.00 MK 1.01 NL 1.11 OV 0.92 ! PT 0.93 SC 1.01 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.03 HN 0.97 KP 1.02 ! LA 1.00 MK 1.00 NL 1.11 OV 0.93 ! PT 0.94 SC 1.01 ! ! ! Fit before self-cal, rms=0.069958Jy sigma=1.413874 ! Fit after self-cal, rms=0.061390Jy sigma=1.221188 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8944 mas, bmaj=1.543 mas, bpa=6.571 degrees ! Estimated noise=0.390872 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00696051 Jy ! Component: 100 - total flux cleaned = -0.00845869 Jy ! Component: 150 - total flux cleaned = -0.00948831 Jy ! Component: 200 - total flux cleaned = -0.0102199 Jy ! Total flux subtracted in 200 components = -0.0102199 Jy ! Clean residual min=-0.004763 max=0.004991 Jy/beam ! Clean residual mean=-0.000018 rms=0.000984 Jy/beam ! Combined flux in latest and established models = 0.5253 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 73 components and 0.525299 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060329Jy sigma=1.199360 ! Fit after self-cal, rms=0.060301Jy sigma=1.198353 ! Inverting map ! Added new window around map position (-19.4, 3.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0031098 Jy ! Component: 100 - total flux cleaned = 0.00322191 Jy ! Component: 150 - total flux cleaned = 0.00341755 Jy ! Component: 200 - total flux cleaned = 0.00350878 Jy ! Total flux subtracted in 200 components = 0.00350878 Jy ! Clean residual min=-0.004342 max=0.004264 Jy/beam ! Clean residual mean=-0.000015 rms=0.000934 Jy/beam ! Combined flux in latest and established models = 0.528808 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 88 components and 0.528808 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059835Jy sigma=1.189291 ! Fit after self-cal, rms=0.059813Jy sigma=1.188834 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059813Jy sigma=1.188834 ! Fit after self-cal, rms=0.053260Jy sigma=1.043501 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8952 mas, bmaj=1.541 mas, bpa=6.502 degrees ! Estimated noise=0.390965 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00371535 Jy ! Component: 100 - total flux cleaned = -0.00466043 Jy ! Component: 150 - total flux cleaned = -0.00481935 Jy ! Component: 200 - total flux cleaned = -0.00509638 Jy ! Total flux subtracted in 200 components = -0.00509638 Jy ! Clean residual min=-0.002358 max=0.002749 Jy/beam ! Clean residual mean=0.000002 rms=0.000557 Jy/beam ! Combined flux in latest and established models = 0.523712 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 98 components and 0.523712 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052923Jy sigma=1.036551 ! Fit after self-cal, rms=0.052907Jy sigma=1.036131 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.8, -1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00109272 Jy ! Component: 100 - total flux cleaned = 0.000348288 Jy ! Component: 150 - total flux cleaned = -4.05723e-05 Jy ! Component: 200 - total flux cleaned = -0.00033187 Jy ! Total flux subtracted in 200 components = -0.00033187 Jy ! Clean residual min=-0.002113 max=0.002584 Jy/beam ! Clean residual mean=0.000001 rms=0.000516 Jy/beam ! Combined flux in latest and established models = 0.52338 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 110 components and 0.52338 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052700Jy sigma=1.031834 ! Fit after self-cal, rms=0.052680Jy sigma=1.031490 ! Inverting map ! Added new window around map position (-0.8, -7.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00143709 Jy ! Component: 100 - total flux cleaned = 0.00177201 Jy ! Component: 150 - total flux cleaned = 0.00194696 Jy ! Component: 200 - total flux cleaned = 0.0018947 Jy ! Total flux subtracted in 200 components = 0.0018947 Jy ! Clean residual min=-0.001935 max=0.002121 Jy/beam ! Clean residual mean=0.000000 rms=0.000482 Jy/beam ! Combined flux in latest and established models = 0.525275 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 129 components and 0.525275 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052513Jy sigma=1.028199 ! Fit after self-cal, rms=0.052506Jy sigma=1.028055 ! Inverting map ! Added new window around map position (-8.2, 16.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00176357 Jy ! Component: 100 - total flux cleaned = 0.0024079 Jy ! Component: 150 - total flux cleaned = 0.00260098 Jy ! Component: 200 - total flux cleaned = 0.00273508 Jy ! Total flux subtracted in 200 components = 0.00273508 Jy ! Clean residual min=-0.001807 max=0.001854 Jy/beam ! Clean residual mean=-0.000001 rms=0.000456 Jy/beam ! Combined flux in latest and established models = 0.52801 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 147 components and 0.52801 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052396Jy sigma=1.025850 ! Fit after self-cal, rms=0.052391Jy sigma=1.025767 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052391Jy sigma=1.025767 ! Fit after self-cal, rms=0.052329Jy sigma=1.024744 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.895 mas, bmaj=1.54 mas, bpa=6.47 degrees ! Estimated noise=0.390929 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00156071 Jy ! Component: 100 - total flux cleaned = -0.00166631 Jy ! Component: 150 - total flux cleaned = -0.00152919 Jy ! Component: 200 - total flux cleaned = -0.00136108 Jy ! Total flux subtracted in 200 components = -0.00136108 Jy ! Clean residual min=-0.001687 max=0.001823 Jy/beam ! Clean residual mean=0.000000 rms=0.000426 Jy/beam ! Combined flux in latest and established models = 0.526649 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 149 components and 0.526649 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052238Jy sigma=1.022863 ! Fit after self-cal, rms=0.052235Jy sigma=1.022813 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.6, 20.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000804149 Jy ! Component: 100 - total flux cleaned = 0.000797713 Jy ! Component: 150 - total flux cleaned = 0.000998093 Jy ! Component: 200 - total flux cleaned = 0.00114976 Jy ! Total flux subtracted in 200 components = 0.00114976 Jy ! Clean residual min=-0.001702 max=0.001624 Jy/beam ! Clean residual mean=-0.000000 rms=0.000414 Jy/beam ! Combined flux in latest and established models = 0.527799 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 162 components and 0.527799 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052157Jy sigma=1.021317 ! Fit after self-cal, rms=0.052154Jy sigma=1.021250 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052154Jy sigma=1.021250 ! Fit after self-cal, rms=0.052126Jy sigma=1.020922 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.152 mas, bmaj=2.654 mas, bpa=14.24 degrees ! Estimated noise=0.514542 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00072886 Jy ! Component: 100 - total flux cleaned = -0.000689954 Jy ! Component: 150 - total flux cleaned = -0.00068734 Jy ! Component: 200 - total flux cleaned = -0.000648312 Jy ! Total flux subtracted in 200 components = -0.000648312 Jy ! Clean residual min=-0.002178 max=0.001916 Jy/beam ! Clean residual mean=0.000000 rms=0.000523 Jy/beam ! Combined flux in latest and established models = 0.527151 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 185 components and 0.527151 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052088Jy sigma=1.020135 ! Fit after self-cal, rms=0.052086Jy sigma=1.020086 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000124316 Jy ! Component: 100 - total flux cleaned = -0.000191709 Jy ! Component: 150 - total flux cleaned = -0.000190988 Jy ! Component: 200 - total flux cleaned = -0.000221069 Jy ! Total flux subtracted in 200 components = -0.000221069 Jy ! Clean residual min=-0.002138 max=0.001837 Jy/beam ! Clean residual mean=-0.000000 rms=0.000505 Jy/beam ! Combined flux in latest and established models = 0.52693 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 199 components and 0.52693 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052068Jy sigma=1.019726 ! Fit after self-cal, rms=0.052067Jy sigma=1.019708 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.895 mas, bmaj=1.541 mas, bpa=6.447 degrees ! Estimated noise=0.390849 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.895 x 1.541 at 6.447 degrees (North through East) ! Clean map min=-0.0019073 max=0.46191 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7013 mas, bmaj=1.326 mas, bpa=-2.424 degrees ! Estimated noise=0.57147 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.360441 Jy ! Component: 100 - total flux cleaned = 0.440494 Jy ! Component: 150 - total flux cleaned = 0.467962 Jy ! Component: 200 - total flux cleaned = 0.483104 Jy ! Total flux subtracted in 200 components = 0.483104 Jy ! Clean residual min=-0.003982 max=0.007839 Jy/beam ! Clean residual mean=0.000003 rms=0.000946 Jy/beam ! Combined flux in latest and established models = 0.483104 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.483104 Jy ! Inverting map and beam ! Estimated beam: bmin=0.895 mas, bmaj=1.541 mas, bpa=6.447 degrees ! Estimated noise=0.390849 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.011481 Jy ! Component: 100 - total flux cleaned = 0.0185173 Jy ! Component: 150 - total flux cleaned = 0.0233844 Jy ! Component: 200 - total flux cleaned = 0.0271447 Jy ! Total flux subtracted in 200 components = 0.0271447 Jy ! Clean residual min=-0.002399 max=0.002512 Jy/beam ! Clean residual mean=0.000002 rms=0.000527 Jy/beam ! Combined flux in latest and established models = 0.510249 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 35 components and 0.510249 Jy ! Inverting map ! Added new window around map position (2, 0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00314241 Jy ! Component: 100 - total flux cleaned = 0.00537556 Jy ! Component: 150 - total flux cleaned = 0.00715338 Jy ! Component: 200 - total flux cleaned = 0.00874228 Jy ! Total flux subtracted in 200 components = 0.00874228 Jy ! Clean residual min=-0.002088 max=0.002164 Jy/beam ! Clean residual mean=0.000001 rms=0.000461 Jy/beam ! Combined flux in latest and established models = 0.518991 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 49 components and 0.518991 Jy ! Inverting map ! Added new window around map position (-24, -27.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00184972 Jy ! Component: 100 - total flux cleaned = 0.00304695 Jy ! Component: 150 - total flux cleaned = 0.00395349 Jy ! Component: 200 - total flux cleaned = 0.00449961 Jy ! Total flux subtracted in 200 components = 0.00449961 Jy ! Clean residual min=-0.001958 max=0.001902 Jy/beam ! Clean residual mean=0.000000 rms=0.000432 Jy/beam ! Combined flux in latest and established models = 0.523491 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 71 components and 0.523491 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.152 mas, bmaj=2.654 mas, bpa=14.24 degrees ! Estimated noise=0.514542 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00149179 Jy ! Component: 100 - total flux cleaned = 0.00196125 Jy ! Component: 150 - total flux cleaned = 0.00205069 Jy ! Component: 200 - total flux cleaned = 0.00225647 Jy ! Total flux subtracted in 200 components = 0.00225647 Jy ! Clean residual min=-0.001966 max=0.001908 Jy/beam ! Clean residual mean=-0.000000 rms=0.000505 Jy/beam ! Combined flux in latest and established models = 0.525747 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000152064 Jy ! Component: 100 - total flux cleaned = 0.00036257 Jy ! Component: 150 - total flux cleaned = 0.000559018 Jy ! Component: 200 - total flux cleaned = 0.000743524 Jy ! Total flux subtracted in 200 components = 0.000743524 Jy ! Clean residual min=-0.001916 max=0.001817 Jy/beam ! Clean residual mean=-0.000001 rms=0.000488 Jy/beam ! Combined flux in latest and established models = 0.526491 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 111 components and 0.526491 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.895 mas, bmaj=1.541 mas, bpa=6.447 degrees ! Estimated noise=0.390849 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000469028 Jy ! Component: 100 - total flux cleaned = -0.000469041 Jy ! Component: 150 - total flux cleaned = -0.000418045 Jy ! Component: 200 - total flux cleaned = -0.000323297 Jy ! Total flux subtracted in 200 components = -0.000323297 Jy ! Clean residual min=-0.001739 max=0.001628 Jy/beam ! Clean residual mean=-0.000000 rms=0.000401 Jy/beam ! Combined flux in latest and established models = 0.526168 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 122 components and 0.526168 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052178Jy sigma=1.021879 ! Fit after self-cal, rms=0.052141Jy sigma=1.021121 wmodel J0154+4743_X_a_map.mod ! Writing 122 model components to file: J0154+4743_X_a_map.mod wobs J0154+4743_X_a_uvs.fits ! Writing UV FITS file: J0154+4743_X_a_uvs.fits wwins J0154+4743_X_a_map.win ! wwins: Wrote 11 windows to J0154+4743_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000533379 Jy ! Component: 100 - total flux cleaned = -0.000564248 Jy ! Component: 150 - total flux cleaned = -0.00059344 Jy ! Component: 200 - total flux cleaned = -0.000593284 Jy ! Component: 250 - total flux cleaned = -0.000676239 Jy ! Component: 300 - total flux cleaned = -0.000703178 Jy ! Component: 350 - total flux cleaned = -0.000677043 Jy ! Component: 400 - total flux cleaned = -0.00070316 Jy ! Component: 450 - total flux cleaned = -0.000677808 Jy ! Component: 500 - total flux cleaned = -0.000677832 Jy ! Component: 550 - total flux cleaned = -0.000653482 Jy ! Component: 600 - total flux cleaned = -0.00067743 Jy ! Component: 650 - total flux cleaned = -0.000748886 Jy ! Component: 700 - total flux cleaned = -0.000678085 Jy ! Component: 750 - total flux cleaned = -0.000771173 Jy ! Component: 800 - total flux cleaned = -0.000770838 Jy ! Component: 850 - total flux cleaned = -0.000816337 Jy ! Component: 900 - total flux cleaned = -0.00081631 Jy ! Component: 950 - total flux cleaned = -0.000904899 Jy ! Component: 1000 - total flux cleaned = -0.000838772 Jy ! Component: 1050 - total flux cleaned = -0.000860608 Jy ! Component: 1100 - total flux cleaned = -0.000882027 Jy ! Component: 1150 - total flux cleaned = -0.000946438 Jy ! Component: 1200 - total flux cleaned = -0.000925396 Jy ! Component: 1250 - total flux cleaned = -0.00105061 Jy ! Component: 1300 - total flux cleaned = -0.000946683 Jy ! Component: 1350 - total flux cleaned = -0.000946804 Jy ! Component: 1400 - total flux cleaned = -0.00100806 Jy ! Component: 1450 - total flux cleaned = -0.000967781 Jy ! Component: 1500 - total flux cleaned = -0.000988017 Jy ! Component: 1550 - total flux cleaned = -0.0010879 Jy ! Component: 1600 - total flux cleaned = -0.00102845 Jy ! Component: 1650 - total flux cleaned = -0.00100918 Jy ! Component: 1700 - total flux cleaned = -0.00112602 Jy ! Component: 1750 - total flux cleaned = -0.00112606 Jy ! Component: 1800 - total flux cleaned = -0.00101074 Jy ! Component: 1850 - total flux cleaned = -0.00118255 Jy ! Component: 1900 - total flux cleaned = -0.00118248 Jy ! Component: 1950 - total flux cleaned = -0.00112593 Jy ! Component: 2000 - total flux cleaned = -0.00121943 Jy ! Component: 2050 - total flux cleaned = -0.00123792 Jy ! Component: 2100 - total flux cleaned = -0.00116397 Jy ! Component: 2150 - total flux cleaned = -0.00120062 Jy ! Component: 2200 - total flux cleaned = -0.00118234 Jy ! Component: 2250 - total flux cleaned = -0.00114601 Jy ! Component: 2300 - total flux cleaned = -0.00121804 Jy ! Component: 2350 - total flux cleaned = -0.00114625 Jy ! Component: 2400 - total flux cleaned = -0.00112836 Jy ! Component: 2450 - total flux cleaned = -0.00103968 Jy ! Component: 2500 - total flux cleaned = -0.00103956 Jy ! Component: 2550 - total flux cleaned = -0.00107463 Jy ! Component: 2600 - total flux cleaned = -0.00102261 Jy ! Component: 2650 - total flux cleaned = -0.00102285 Jy ! Component: 2700 - total flux cleaned = -0.00100586 Jy ! Component: 2750 - total flux cleaned = -0.00100611 Jy ! Component: 2800 - total flux cleaned = -0.00109145 Jy ! Component: 2850 - total flux cleaned = -0.000972679 Jy ! Component: 2900 - total flux cleaned = -0.00102321 Jy ! Component: 2950 - total flux cleaned = -0.000956002 Jy ! Component: 3000 - total flux cleaned = -0.000989411 Jy ! Component: 3050 - total flux cleaned = -0.000972641 Jy ! Component: 3100 - total flux cleaned = -0.000972576 Jy ! Component: 3150 - total flux cleaned = -0.000840848 Jy ! Component: 3200 - total flux cleaned = -0.000939094 Jy ! Component: 3250 - total flux cleaned = -0.000890154 Jy ! Component: 3300 - total flux cleaned = -0.000825303 Jy ! Component: 3350 - total flux cleaned = -0.000825319 Jy ! Component: 3400 - total flux cleaned = -0.000825573 Jy ! Component: 3450 - total flux cleaned = -0.000761598 Jy ! Component: 3500 - total flux cleaned = -0.000793417 Jy ! Component: 3550 - total flux cleaned = -0.000745964 Jy ! Component: 3600 - total flux cleaned = -0.000698701 Jy ! Component: 3650 - total flux cleaned = -0.000714482 Jy ! Component: 3700 - total flux cleaned = -0.000667613 Jy ! Component: 3750 - total flux cleaned = -0.000605415 Jy ! Component: 3800 - total flux cleaned = -0.000527978 Jy ! Component: 3850 - total flux cleaned = -0.000558801 Jy ! Component: 3900 - total flux cleaned = -0.000543486 Jy ! Component: 3950 - total flux cleaned = -0.000512804 Jy ! Component: 4000 - total flux cleaned = -0.000406178 Jy ! Component: 4050 - total flux cleaned = -0.000390987 Jy ! Total flux subtracted in 4096 components = -0.000375993 Jy ! Clean residual min=-0.001053 max=0.001029 Jy/beam ! Clean residual mean=-0.000001 rms=0.000258 Jy/beam ! Combined flux in latest and established models = 0.525792 Jy keep ! Adding 328 model components to the UV plane model. ! The established model now contains 450 components and 0.525792 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J0154+4743_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.895 x 1.541 at 6.447 degrees (North through East) ! Clean map min=-0.0018199 max=0.46276 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J0154+4743_X_a_map.fits wmodel /vlbi/uf001/uvm//J0154+4743_X_a_map.mod ! Writing 450 model components to file: /vlbi/uf001/uvm//J0154+4743_X_a_map.mod wobs /vlbi/uf001/uvm//J0154+4743_X_a_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J0154+4743_X_a_uvs.fits wwins /vlbi/uf001/uvm//J0154+4743_X_a_map.win ! wwins: Wrote 12 windows to /vlbi/uf001/uvm//J0154+4743_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.462757 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000257831 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.167149 0.167149 0.334298 0.668596 1.33719 2.67438 5.34877 10.6975 21.3951 42.7901 85.5803 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.462 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1794.81 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J0154+4743_X_a_dfm.log closed on Sun Jan 13 20:32:36 2019