! Started logfile: /vlbi/uf001/uva//J0152-2942_S_dfm.log on Sun Jan 13 21:09:34 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /vlbi/uf001/uva//J0152-2942_S_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J0152-2942_S_uva.fits ! AN table 1: 48 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.993634 visibilities/baseline/integration-bin. ! Found source: J0152-2942 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 5151 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0152-2942_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=1.009612Jy sigma=13.826566 ! Fit after self-cal, rms=0.882210Jy sigma=12.056346 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.325 mas, bmaj=6.227 mas, bpa=-6.407 degrees ! Estimated noise=1.11763 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0887701 Jy ! Component: 100 - total flux cleaned = 0.1175 Jy ! Total flux subtracted in 100 components = 0.1175 Jy ! Clean residual min=-0.010179 max=0.014706 Jy/beam ! Clean residual mean=-0.000102 rms=0.002449 Jy/beam ! Combined flux in latest and established models = 0.1175 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.1175 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.118761Jy sigma=1.308173 ! Fit after self-cal, rms=0.118508Jy sigma=1.305829 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.758 mas, bmaj=7.366 mas, bpa=-5.218 degrees ! Estimated noise=0.753039 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.5, -4.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0220923 Jy ! Component: 100 - total flux cleaned = 0.0352537 Jy ! Component: 150 - total flux cleaned = 0.0437348 Jy ! Component: 200 - total flux cleaned = 0.0494269 Jy ! Total flux subtracted in 200 components = 0.0494269 Jy ! Clean residual min=-0.007820 max=0.011725 Jy/beam ! Clean residual mean=-0.000034 rms=0.002176 Jy/beam ! Combined flux in latest and established models = 0.166927 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 44 components and 0.166927 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.113456Jy sigma=1.230667 ! Fit after self-cal, rms=0.113008Jy sigma=1.225172 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.758 x 7.366 at -5.218 degrees (North through East) ! Clean map min=-0.0080717 max=0.11458 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 HN 1.21 KP 0.99 LA 0.92 ! MK 1.04 NL 1.11 OV 0.96 PT 0.99 ! SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.53 HN 1.24 KP 1.01 LA 0.94 ! MK 0.98 NL 1.09 OV 0.80 PT 0.97 ! SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 HN 1.20 KP 1.02 LA 0.92 ! MK 1.08 NL 1.02 OV 0.91 PT 1.02 ! SC 1.01 ! ! ! Fit before self-cal, rms=0.113008Jy sigma=1.225172 ! Fit after self-cal, rms=0.129124Jy sigma=1.201909 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.798 mas, bmaj=7.375 mas, bpa=-4.507 degrees ! Estimated noise=0.757528 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00365977 Jy ! Component: 100 - total flux cleaned = 0.00496379 Jy ! Component: 150 - total flux cleaned = 0.00522954 Jy ! Component: 200 - total flux cleaned = 0.00539824 Jy ! Total flux subtracted in 200 components = 0.00539824 Jy ! Clean residual min=-0.007310 max=0.006894 Jy/beam ! Clean residual mean=0.000033 rms=0.001682 Jy/beam ! Combined flux in latest and established models = 0.172325 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 59 components and 0.172325 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.128889Jy sigma=1.200703 ! Fit after self-cal, rms=0.129281Jy sigma=1.199598 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.129281Jy sigma=1.199598 ! Fit after self-cal, rms=0.134476Jy sigma=1.189847 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.786 mas, bmaj=7.36 mas, bpa=-4.725 degrees ! Estimated noise=0.771258 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00277783 Jy ! Component: 100 - total flux cleaned = 0.00421442 Jy ! Component: 150 - total flux cleaned = 0.00454836 Jy ! Component: 200 - total flux cleaned = 0.00474375 Jy ! Total flux subtracted in 200 components = 0.00474375 Jy ! Clean residual min=-0.006268 max=0.005365 Jy/beam ! Clean residual mean=0.000015 rms=0.001396 Jy/beam ! Combined flux in latest and established models = 0.177068 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 83 components and 0.177069 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.134329Jy sigma=1.189090 ! Fit after self-cal, rms=0.134405Jy sigma=1.188935 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000537439 Jy ! Component: 100 - total flux cleaned = 0.000632901 Jy ! Component: 150 - total flux cleaned = 0.00071831 Jy ! Component: 200 - total flux cleaned = 0.00071748 Jy ! Total flux subtracted in 200 components = 0.00071748 Jy ! Clean residual min=-0.006342 max=0.005200 Jy/beam ! Clean residual mean=0.000017 rms=0.001388 Jy/beam ! Combined flux in latest and established models = 0.177786 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 91 components and 0.177786 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.134353Jy sigma=1.188637 ! Fit after self-cal, rms=0.134348Jy sigma=1.188592 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.134348Jy sigma=1.188592 ! Fit after self-cal, rms=0.134276Jy sigma=1.175417 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.784 mas, bmaj=7.327 mas, bpa=-4.923 degrees ! Estimated noise=0.77306 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000277485 Jy ! Component: 100 - total flux cleaned = -0.000277255 Jy ! Component: 150 - total flux cleaned = -0.00023978 Jy ! Component: 200 - total flux cleaned = -0.000240494 Jy ! Total flux subtracted in 200 components = -0.000240494 Jy ! Clean residual min=-0.003864 max=0.003169 Jy/beam ! Clean residual mean=-0.000008 rms=0.000872 Jy/beam ! Combined flux in latest and established models = 0.177546 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 103 components and 0.177546 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.134248Jy sigma=1.174991 ! Fit after self-cal, rms=0.134332Jy sigma=1.174684 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.43313e-05 Jy ! Component: 100 - total flux cleaned = -2.36859e-05 Jy ! Component: 150 - total flux cleaned = -2.3632e-05 Jy ! Component: 200 - total flux cleaned = -2.36588e-05 Jy ! Total flux subtracted in 200 components = -2.36588e-05 Jy ! Clean residual min=-0.003809 max=0.003147 Jy/beam ! Clean residual mean=-0.000009 rms=0.000868 Jy/beam ! Combined flux in latest and established models = 0.177522 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 113 components and 0.177522 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.134316Jy sigma=1.174493 ! Fit after self-cal, rms=0.134330Jy sigma=1.174465 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.134330Jy sigma=1.174465 ! Fit after self-cal, rms=0.135425Jy sigma=1.174426 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.194 mas, bmaj=18.27 mas, bpa=-1.26 degrees ! Estimated noise=1.06409 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000134563 Jy ! Component: 100 - total flux cleaned = 0.000273645 Jy ! Component: 150 - total flux cleaned = 0.00036958 Jy ! Component: 200 - total flux cleaned = 0.000461105 Jy ! Total flux subtracted in 200 components = 0.000461105 Jy ! Clean residual min=-0.005323 max=0.003511 Jy/beam ! Clean residual mean=-0.000023 rms=0.001168 Jy/beam ! Combined flux in latest and established models = 0.177983 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 123 components and 0.177983 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.135419Jy sigma=1.174419 ! Fit after self-cal, rms=0.135449Jy sigma=1.174377 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.86207e-05 Jy ! Component: 100 - total flux cleaned = 0.000172569 Jy ! Component: 150 - total flux cleaned = 0.000253904 Jy ! Component: 200 - total flux cleaned = 0.000331163 Jy ! Total flux subtracted in 200 components = 0.000331163 Jy ! Clean residual min=-0.005279 max=0.003528 Jy/beam ! Clean residual mean=-0.000022 rms=0.001161 Jy/beam ! Combined flux in latest and established models = 0.178314 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 126 components and 0.178314 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.135449Jy sigma=1.174421 ! Fit after self-cal, rms=0.135460Jy sigma=1.174408 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=2.785 mas, bmaj=7.314 mas, bpa=-4.957 degrees ! Estimated noise=0.773991 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.785 x 7.314 at -4.957 degrees (North through East) ! Clean map min=-0.0036945 max=0.1148 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.343 mas, bmaj=6.172 mas, bpa=-6.163 degrees ! Estimated noise=1.16482 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.091822 Jy ! Component: 100 - total flux cleaned = 0.122582 Jy ! Component: 150 - total flux cleaned = 0.138177 Jy ! Component: 200 - total flux cleaned = 0.148166 Jy ! Total flux subtracted in 200 components = 0.148166 Jy ! Clean residual min=-0.005829 max=0.005816 Jy/beam ! Clean residual mean=-0.000055 rms=0.001435 Jy/beam ! Combined flux in latest and established models = 0.148166 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.148166 Jy ! Inverting map and beam ! Estimated beam: bmin=2.785 mas, bmaj=7.314 mas, bpa=-4.957 degrees ! Estimated noise=0.773991 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0104801 Jy ! Component: 100 - total flux cleaned = 0.0167068 Jy ! Component: 150 - total flux cleaned = 0.020718 Jy ! Component: 200 - total flux cleaned = 0.0234129 Jy ! Total flux subtracted in 200 components = 0.0234129 Jy ! Clean residual min=-0.004180 max=0.003691 Jy/beam ! Clean residual mean=-0.000028 rms=0.000937 Jy/beam ! Combined flux in latest and established models = 0.171579 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 61 components and 0.171579 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.194 mas, bmaj=18.27 mas, bpa=-1.26 degrees ! Estimated noise=1.06409 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00353835 Jy ! Component: 100 - total flux cleaned = 0.00531072 Jy ! Component: 150 - total flux cleaned = 0.00609052 Jy ! Component: 200 - total flux cleaned = 0.00626469 Jy ! Total flux subtracted in 200 components = 0.00626469 Jy ! Clean residual min=-0.005123 max=0.003609 Jy/beam ! Clean residual mean=-0.000026 rms=0.001165 Jy/beam ! Combined flux in latest and established models = 0.177844 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.97047e-05 Jy ! Component: 100 - total flux cleaned = 0.000168155 Jy ! Component: 150 - total flux cleaned = 0.000233477 Jy ! Component: 200 - total flux cleaned = 0.000295064 Jy ! Total flux subtracted in 200 components = 0.000295064 Jy ! Clean residual min=-0.005085 max=0.003567 Jy/beam ! Clean residual mean=-0.000024 rms=0.001156 Jy/beam ! Combined flux in latest and established models = 0.178139 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 80 components and 0.178139 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.785 mas, bmaj=7.314 mas, bpa=-4.957 degrees ! Estimated noise=0.773991 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0013764 Jy ! Component: 100 - total flux cleaned = -0.00147737 Jy ! Component: 150 - total flux cleaned = -0.0014328 Jy ! Component: 200 - total flux cleaned = -0.00139254 Jy ! Total flux subtracted in 200 components = -0.00139254 Jy ! Clean residual min=-0.003968 max=0.003584 Jy/beam ! Clean residual mean=-0.000013 rms=0.000872 Jy/beam ! Combined flux in latest and established models = 0.176746 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 93 components and 0.176746 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.135475Jy sigma=1.174763 ! Fit after self-cal, rms=0.135482Jy sigma=1.174559 wmodel J0152-2942_S_map.mod ! Writing 93 model components to file: J0152-2942_S_map.mod wobs J0152-2942_S_uvs.fits ! Writing UV FITS file: J0152-2942_S_uvs.fits wwins J0152-2942_S_map.win ! wwins: Wrote 2 windows to J0152-2942_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000963535 Jy ! Component: 100 - total flux cleaned = -0.00173964 Jy ! Component: 150 - total flux cleaned = -0.00258583 Jy ! Component: 200 - total flux cleaned = -0.00312553 Jy ! Component: 250 - total flux cleaned = -0.00359089 Jy ! Component: 300 - total flux cleaned = -0.00398885 Jy ! Component: 350 - total flux cleaned = -0.00437438 Jy ! Component: 400 - total flux cleaned = -0.00484023 Jy ! Component: 450 - total flux cleaned = -0.0052924 Jy ! Component: 500 - total flux cleaned = -0.00573158 Jy ! Component: 550 - total flux cleaned = -0.00603071 Jy ! Component: 600 - total flux cleaned = -0.00644705 Jy ! Component: 650 - total flux cleaned = -0.00681227 Jy ! Component: 700 - total flux cleaned = -0.00712921 Jy ! Component: 750 - total flux cleaned = -0.00736185 Jy ! Component: 800 - total flux cleaned = -0.00751378 Jy ! Component: 850 - total flux cleaned = -0.00758888 Jy ! Component: 900 - total flux cleaned = -0.00769905 Jy ! Component: 950 - total flux cleaned = -0.00791438 Jy ! Component: 1000 - total flux cleaned = -0.00791447 Jy ! Component: 1050 - total flux cleaned = -0.00808789 Jy ! Component: 1100 - total flux cleaned = -0.00819007 Jy ! Component: 1150 - total flux cleaned = -0.0082242 Jy ! Component: 1200 - total flux cleaned = -0.00829087 Jy ! Component: 1250 - total flux cleaned = -0.00832403 Jy ! Component: 1300 - total flux cleaned = -0.00838748 Jy ! Component: 1350 - total flux cleaned = -0.00835622 Jy ! Component: 1400 - total flux cleaned = -0.00838731 Jy ! Component: 1450 - total flux cleaned = -0.0082958 Jy ! Component: 1500 - total flux cleaned = -0.00829653 Jy ! Component: 1550 - total flux cleaned = -0.00829746 Jy ! Component: 1600 - total flux cleaned = -0.00844335 Jy ! Component: 1650 - total flux cleaned = -0.00832802 Jy ! Component: 1700 - total flux cleaned = -0.00829943 Jy ! Component: 1750 - total flux cleaned = -0.00829959 Jy ! Component: 1800 - total flux cleaned = -0.00835481 Jy ! Component: 1850 - total flux cleaned = -0.0082718 Jy ! Component: 1900 - total flux cleaned = -0.00816336 Jy ! Component: 1950 - total flux cleaned = -0.00808335 Jy ! Component: 2000 - total flux cleaned = -0.00803115 Jy ! Component: 2050 - total flux cleaned = -0.00797923 Jy ! Component: 2100 - total flux cleaned = -0.0079021 Jy ! Component: 2150 - total flux cleaned = -0.00787671 Jy ! Component: 2200 - total flux cleaned = -0.0078262 Jy ! Component: 2250 - total flux cleaned = -0.0077512 Jy ! Component: 2300 - total flux cleaned = -0.00777606 Jy ! Component: 2350 - total flux cleaned = -0.007727 Jy ! Component: 2400 - total flux cleaned = -0.00770257 Jy ! Component: 2450 - total flux cleaned = -0.00775088 Jy ! Component: 2500 - total flux cleaned = -0.00765545 Jy ! Component: 2550 - total flux cleaned = -0.00765526 Jy ! Component: 2600 - total flux cleaned = -0.0076081 Jy ! Component: 2650 - total flux cleaned = -0.00758497 Jy ! Component: 2700 - total flux cleaned = -0.00760781 Jy ! Component: 2750 - total flux cleaned = -0.00760767 Jy ! Component: 2800 - total flux cleaned = -0.0076075 Jy ! Component: 2850 - total flux cleaned = -0.00758514 Jy ! Component: 2900 - total flux cleaned = -0.00762966 Jy ! Component: 2950 - total flux cleaned = -0.00765173 Jy ! Component: 3000 - total flux cleaned = -0.00765164 Jy ! Component: 3050 - total flux cleaned = -0.00760831 Jy ! Component: 3100 - total flux cleaned = -0.00769431 Jy ! Component: 3150 - total flux cleaned = -0.00760928 Jy ! Component: 3200 - total flux cleaned = -0.00769381 Jy ! Component: 3250 - total flux cleaned = -0.00771464 Jy ! Component: 3300 - total flux cleaned = -0.00773556 Jy ! Component: 3350 - total flux cleaned = -0.0077354 Jy ! Component: 3400 - total flux cleaned = -0.00771532 Jy ! Component: 3450 - total flux cleaned = -0.00773566 Jy ! Component: 3500 - total flux cleaned = -0.00769529 Jy ! Component: 3550 - total flux cleaned = -0.00773552 Jy ! Component: 3600 - total flux cleaned = -0.0077356 Jy ! Component: 3650 - total flux cleaned = -0.007696 Jy ! Component: 3700 - total flux cleaned = -0.00773529 Jy ! Component: 3750 - total flux cleaned = -0.0077353 Jy ! Component: 3800 - total flux cleaned = -0.00775444 Jy ! Component: 3850 - total flux cleaned = -0.00777354 Jy ! Component: 3900 - total flux cleaned = -0.00779265 Jy ! Component: 3950 - total flux cleaned = -0.00771686 Jy ! Component: 4000 - total flux cleaned = -0.00781091 Jy ! Component: 4050 - total flux cleaned = -0.00777348 Jy ! Total flux subtracted in 4096 components = -0.00781057 Jy ! Clean residual min=-0.000930 max=0.001123 Jy/beam ! Clean residual mean=0.000002 rms=0.000343 Jy/beam ! Combined flux in latest and established models = 0.168936 Jy keep ! Adding 308 model components to the UV plane model. ! The established model now contains 401 components and 0.168936 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J0152-2942_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.785 x 7.314 at -4.957 degrees (North through East) ! Clean map min=-0.002379 max=0.11597 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J0152-2942_S_map.fits wmodel /vlbi/uf001/uva//J0152-2942_S_map.mod ! Writing 401 model components to file: /vlbi/uf001/uva//J0152-2942_S_map.mod wobs /vlbi/uf001/uva//J0152-2942_S_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J0152-2942_S_uvs.fits wwins /vlbi/uf001/uva//J0152-2942_S_map.win ! wwins: Wrote 3 windows to /vlbi/uf001/uva//J0152-2942_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.115973 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000343334 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.888136 0.888136 1.77627 3.55254 7.10509 14.2102 28.4204 56.8407 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.115 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 337.786 quit ! Quitting program ! Log file /vlbi/uf001/uva//J0152-2942_S_dfm.log closed on Sun Jan 13 21:09:38 2019