! Started logfile: /vlbi/uf001/uva//J0151+2517_X_dfm.log on Sun Jan 13 21:08:18 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /vlbi/uf001/uva//J0151+2517_X_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0151+2517_X_uva.fits
! AN table 1: 42 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.916402 visibilities/baseline/integration-bin.
! Found source: J0151+2517
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 20784 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0151+2517_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.008673Jy  sigma=23.814456
! Fit after  self-cal, rms=0.915026Jy  sigma=21.591282
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6989 mas, bmaj=1.535 mas, bpa=-3.037 degrees
! Estimated noise=0.392135 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0653259 Jy
! Component: 100  -  total flux cleaned = 0.080291 Jy
! Total flux subtracted in 100 components = 0.080291 Jy
! Clean residual min=-0.004157 max=0.009627 Jy/beam
! Clean residual mean=0.000004 rms=0.000943 Jy/beam
! Combined flux in latest and established models = 0.080291 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.080291 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060201Jy  sigma=1.339474
! Fit after  self-cal, rms=0.060040Jy  sigma=1.336514
! Inverting map 
! Added new window around map position (0.2, -2.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00927803 Jy
! Component: 100  -  total flux cleaned = 0.0149369 Jy
! Total flux subtracted in 100 components = 0.0149369 Jy
! Clean residual min=-0.003523 max=0.004800 Jy/beam
! Clean residual mean=0.000002 rms=0.000755 Jy/beam
! Combined flux in latest and established models = 0.0952279 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 24 components and 0.0952279 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057872Jy  sigma=1.278886
! Fit after  self-cal, rms=0.057729Jy  sigma=1.275695
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8851 mas, bmaj=1.834 mas, bpa=-2.836 degrees
! Estimated noise=0.228051 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00770814 Jy
! Component: 100  -  total flux cleaned = 0.0122307 Jy
! Component: 150  -  total flux cleaned = 0.0153821 Jy
! Component: 200  -  total flux cleaned = 0.0176308 Jy
! Total flux subtracted in 200 components = 0.0176308 Jy
! Clean residual min=-0.002453 max=0.003261 Jy/beam
! Clean residual mean=0.000001 rms=0.000551 Jy/beam
! Combined flux in latest and established models = 0.112859 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 55 components and 0.112859 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056643Jy  sigma=1.246333
! Fit after  self-cal, rms=0.056586Jy  sigma=1.244752
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8851 x 1.834 at -2.836 degrees (North through East)
! Clean map  min=-0.0025232  max=0.084387 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     FD        1.00     HN        1.07     KP        1.00     
!   LA        1.01     MK        0.96     NL        1.08     OV        0.89     
!   PT        0.89     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.14     FD        1.00     HN        1.03     KP        0.96     
!   LA        0.94     MK        1.02     NL        1.09     OV        0.90     
!   PT        0.94     SC        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        0.99     HN        1.02     KP        0.99     
!   LA        0.99     MK        0.99     NL        1.12     OV        0.90     
!   PT        0.92     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.96     HN        1.10     KP        1.00     
!   LA        0.99     MK        0.99     NL        1.12     OV        0.89     
!   PT        0.94     SC        0.98     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        0.98     HN        1.05     KP        1.02     
!   LA        0.97     MK        1.00     NL        1.11     OV        0.87     
!   PT        0.95     SC        0.98     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     FD        1.02     HN        1.03     KP        0.98     
!   LA        0.98     MK        0.97     NL        1.12     OV        0.89     
!   PT        0.96     SC        0.98     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        0.96     HN        1.17     KP        0.98     
!   LA        0.99     MK        1.00     NL        1.12     OV        0.91     
!   PT        0.96     SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.99     HN        0.97     KP        1.01     
!   LA        0.97     MK        1.00     NL        1.16     OV        0.89     
!   PT        0.94     SC        0.96     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.96     HN        1.05     KP        1.02     
!   LA        0.98     MK        1.03     NL        1.10     OV        0.92     
!   PT        0.94     SC        0.96     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.01     HN        1.01     KP        0.98     
!   LA        0.98     MK        0.99     NL        1.11     OV        0.89     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.97     HN        1.06     KP        0.94     
!   LA        0.99     MK        1.06     NL        1.13     OV        0.93     
!   PT        0.94     SC        0.97     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.95     HN        1.03     KP        1.02     
!   LA        1.00     MK        1.05     NL        1.06     OV        0.91     
!   PT        0.97     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.056586Jy  sigma=1.244752
! Fit after  self-cal, rms=0.056115Jy  sigma=1.229434
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8883 mas, bmaj=1.856 mas, bpa=-2.429 degrees
! Estimated noise=0.226599 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000164359 Jy
! Component: 100  -  total flux cleaned = -1.52566e-06 Jy
! Component: 150  -  total flux cleaned = -0.00010142 Jy
! Component: 200  -  total flux cleaned = -0.000184463 Jy
! Total flux subtracted in 200 components = -0.000184463 Jy
! Clean residual min=-0.001704 max=0.001834 Jy/beam
! Clean residual mean=-0.000001 rms=0.000349 Jy/beam
! Combined flux in latest and established models = 0.112674 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 64 components and 0.112674 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056079Jy  sigma=1.228616
! Fit after  self-cal, rms=0.056114Jy  sigma=1.228226
! Inverting map 
! Added new window around map position (-15.2, 24.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000806737 Jy
! Component: 100  -  total flux cleaned = 0.000859001 Jy
! Component: 150  -  total flux cleaned = 0.000893406 Jy
! Component: 200  -  total flux cleaned = 0.000864654 Jy
! Total flux subtracted in 200 components = 0.000864654 Jy
! Clean residual min=-0.001697 max=0.001464 Jy/beam
! Clean residual mean=-0.000001 rms=0.000339 Jy/beam
! Combined flux in latest and established models = 0.113539 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 81 components and 0.113539 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056040Jy  sigma=1.226946
! Fit after  self-cal, rms=0.056036Jy  sigma=1.226836
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056036Jy  sigma=1.226836
! Fit after  self-cal, rms=0.056800Jy  sigma=1.217870
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8898 mas, bmaj=1.847 mas, bpa=-2.498 degrees
! Estimated noise=0.22647 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.34369e-05 Jy
! Component: 100  -  total flux cleaned = 9.02192e-05 Jy
! Component: 150  -  total flux cleaned = 6.74872e-05 Jy
! Component: 200  -  total flux cleaned = 6.67721e-05 Jy
! Total flux subtracted in 200 components = 6.67721e-05 Jy
! Clean residual min=-0.001107 max=0.001143 Jy/beam
! Clean residual mean=-0.000001 rms=0.000267 Jy/beam
! Combined flux in latest and established models = 0.113606 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 93 components and 0.113606 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056781Jy  sigma=1.217424
! Fit after  self-cal, rms=0.056812Jy  sigma=1.217228
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.41745e-05 Jy
! Component: 100  -  total flux cleaned = 3.1469e-07 Jy
! Component: 150  -  total flux cleaned = -6.41312e-08 Jy
! Component: 200  -  total flux cleaned = -1.46857e-05 Jy
! Total flux subtracted in 200 components = -1.46857e-05 Jy
! Clean residual min=-0.001100 max=0.001076 Jy/beam
! Clean residual mean=-0.000001 rms=0.000265 Jy/beam
! Combined flux in latest and established models = 0.113591 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 100 components and 0.113591 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056802Jy  sigma=1.216983
! Fit after  self-cal, rms=0.056800Jy  sigma=1.216950
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056800Jy  sigma=1.216950
! Fit after  self-cal, rms=0.057046Jy  sigma=1.216842
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8907 mas, bmaj=1.847 mas, bpa=-2.447 degrees
! Estimated noise=0.226357 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.98112e-06 Jy
! Component: 100  -  total flux cleaned = 3.16626e-05 Jy
! Component: 150  -  total flux cleaned = 3.23597e-05 Jy
! Component: 200  -  total flux cleaned = 1.85331e-05 Jy
! Total flux subtracted in 200 components = 1.85331e-05 Jy
! Clean residual min=-0.001130 max=0.001057 Jy/beam
! Clean residual mean=-0.000001 rms=0.000260 Jy/beam
! Combined flux in latest and established models = 0.11361 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 103 components and 0.11361 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057037Jy  sigma=1.216616
! Fit after  self-cal, rms=0.057040Jy  sigma=1.216585
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.88124e-05 Jy
! Component: 100  -  total flux cleaned = 1.71812e-05 Jy
! Component: 150  -  total flux cleaned = 3.03991e-05 Jy
! Component: 200  -  total flux cleaned = 4.20431e-05 Jy
! Total flux subtracted in 200 components = 4.20431e-05 Jy
! Clean residual min=-0.001113 max=0.001015 Jy/beam
! Clean residual mean=-0.000001 rms=0.000258 Jy/beam
! Combined flux in latest and established models = 0.113652 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 108 components and 0.113652 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057034Jy  sigma=1.216438
! Fit after  self-cal, rms=0.057032Jy  sigma=1.216417
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057032Jy  sigma=1.216417
! Fit after  self-cal, rms=0.057060Jy  sigma=1.216402
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.141 mas, bmaj=2.846 mas, bpa=-6.438 degrees
! Estimated noise=0.282348 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000217581 Jy
! Component: 100  -  total flux cleaned = 0.000365469 Jy
! Component: 150  -  total flux cleaned = 0.000440981 Jy
! Component: 200  -  total flux cleaned = 0.000504158 Jy
! Total flux subtracted in 200 components = 0.000504158 Jy
! Clean residual min=-0.001163 max=0.001197 Jy/beam
! Clean residual mean=-0.000002 rms=0.000300 Jy/beam
! Combined flux in latest and established models = 0.114156 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 113 components and 0.114156 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057060Jy  sigma=1.216341
! Fit after  self-cal, rms=0.057056Jy  sigma=1.216269
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.97438e-05 Jy
! Component: 100  -  total flux cleaned = -2.15705e-05 Jy
! Component: 150  -  total flux cleaned = 6.58541e-05 Jy
! Component: 200  -  total flux cleaned = 9.43936e-05 Jy
! Total flux subtracted in 200 components = 9.43936e-05 Jy
! Clean residual min=-0.001169 max=0.001196 Jy/beam
! Clean residual mean=-0.000002 rms=0.000298 Jy/beam
! Combined flux in latest and established models = 0.11425 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 120 components and 0.11425 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057057Jy  sigma=1.216250
! Fit after  self-cal, rms=0.057053Jy  sigma=1.216191
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8912 mas, bmaj=1.847 mas, bpa=-2.424 degrees
! Estimated noise=0.226252 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8912 x 1.847 at -2.424 degrees (North through East)
! Clean map  min=-0.0010317  max=0.083059 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7025 mas, bmaj=1.536 mas, bpa=-2.603 degrees
! Estimated noise=0.392573 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0651223 Jy
! Component: 100  -  total flux cleaned = 0.0821759 Jy
! Component: 150  -  total flux cleaned = 0.0910933 Jy
! Component: 200  -  total flux cleaned = 0.0968639 Jy
! Total flux subtracted in 200 components = 0.0968639 Jy
! Clean residual min=-0.002431 max=0.003352 Jy/beam
! Clean residual mean=0.000002 rms=0.000553 Jy/beam
! Combined flux in latest and established models = 0.0968639 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.0968639 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8912 mas, bmaj=1.847 mas, bpa=-2.424 degrees
! Estimated noise=0.226252 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00603427 Jy
! Component: 100  -  total flux cleaned = 0.00931312 Jy
! Component: 150  -  total flux cleaned = 0.0114664 Jy
! Component: 200  -  total flux cleaned = 0.012991 Jy
! Total flux subtracted in 200 components = 0.012991 Jy
! Clean residual min=-0.001202 max=0.001601 Jy/beam
! Clean residual mean=-0.000000 rms=0.000283 Jy/beam
! Combined flux in latest and established models = 0.109855 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 53 components and 0.109855 Jy
! Inverting map 
! Added new window around map position (1.2, -2.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00146572 Jy
! Component: 100  -  total flux cleaned = 0.00240144 Jy
! Component: 150  -  total flux cleaned = 0.00294607 Jy
! Component: 200  -  total flux cleaned = 0.00338992 Jy
! Total flux subtracted in 200 components = 0.00338992 Jy
! Clean residual min=-0.001112 max=0.001080 Jy/beam
! Clean residual mean=-0.000001 rms=0.000257 Jy/beam
! Combined flux in latest and established models = 0.113245 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 70 components and 0.113245 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.141 mas, bmaj=2.846 mas, bpa=-6.438 degrees
! Estimated noise=0.282348 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000747771 Jy
! Component: 100  -  total flux cleaned = 0.00124823 Jy
! Component: 150  -  total flux cleaned = 0.00147624 Jy
! Component: 200  -  total flux cleaned = 0.00156252 Jy
! Total flux subtracted in 200 components = 0.00156252 Jy
! Clean residual min=-0.001184 max=0.001219 Jy/beam
! Clean residual mean=-0.000002 rms=0.000292 Jy/beam
! Combined flux in latest and established models = 0.114807 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.37359e-05 Jy
! Component: 100  -  total flux cleaned = 0.000110962 Jy
! Component: 150  -  total flux cleaned = 0.000154137 Jy
! Component: 200  -  total flux cleaned = 0.000185666 Jy
! Total flux subtracted in 200 components = 0.000185666 Jy
! Clean residual min=-0.001177 max=0.001212 Jy/beam
! Clean residual mean=-0.000002 rms=0.000291 Jy/beam
! Combined flux in latest and established models = 0.114993 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 89 components and 0.114993 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8912 mas, bmaj=1.847 mas, bpa=-2.424 degrees
! Estimated noise=0.226252 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00032738 Jy
! Component: 100  -  total flux cleaned = -0.00030838 Jy
! Component: 150  -  total flux cleaned = -0.00030905 Jy
! Component: 200  -  total flux cleaned = -0.000291615 Jy
! Total flux subtracted in 200 components = -0.000291615 Jy
! Clean residual min=-0.001045 max=0.001107 Jy/beam
! Clean residual mean=-0.000001 rms=0.000250 Jy/beam
! Combined flux in latest and established models = 0.114701 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 102 components and 0.114701 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057054Jy  sigma=1.216121
! Fit after  self-cal, rms=0.057045Jy  sigma=1.215995
wmodel J0151+2517_X_map.mod
! Writing 102 model components to file: J0151+2517_X_map.mod
wobs   J0151+2517_X_uvs.fits
! Writing UV FITS file: J0151+2517_X_uvs.fits
wwins  J0151+2517_X_map.win
! wwins: Wrote 4 windows to J0151+2517_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 3.77396e-05 Jy
! Component: 100  -  total flux cleaned = 3.81729e-05 Jy
! Component: 150  -  total flux cleaned = 3.81456e-05 Jy
! Component: 200  -  total flux cleaned = -2.98244e-05 Jy
! Component: 250  -  total flux cleaned = -0.000112817 Jy
! Component: 300  -  total flux cleaned = -0.000178044 Jy
! Component: 350  -  total flux cleaned = -0.000194132 Jy
! Component: 400  -  total flux cleaned = -0.000225434 Jy
! Component: 450  -  total flux cleaned = -0.000209646 Jy
! Component: 500  -  total flux cleaned = -0.000164163 Jy
! Component: 550  -  total flux cleaned = -0.000179374 Jy
! Component: 600  -  total flux cleaned = -0.000149583 Jy
! Component: 650  -  total flux cleaned = -0.000120197 Jy
! Component: 700  -  total flux cleaned = -6.23943e-05 Jy
! Component: 750  -  total flux cleaned = -1.98199e-05 Jy
! Component: 800  -  total flux cleaned = 2.2176e-05 Jy
! Component: 850  -  total flux cleaned = 3.59454e-05 Jy
! Component: 900  -  total flux cleaned = 6.32486e-05 Jy
! Component: 950  -  total flux cleaned = 7.68319e-05 Jy
! Component: 1000  -  total flux cleaned = 0.000117212 Jy
! Component: 1050  -  total flux cleaned = 0.00014361 Jy
! Component: 1100  -  total flux cleaned = 0.000183262 Jy
! Component: 1150  -  total flux cleaned = 0.000183293 Jy
! Component: 1200  -  total flux cleaned = 0.000235076 Jy
! Component: 1250  -  total flux cleaned = 0.000247733 Jy
! Component: 1300  -  total flux cleaned = 0.00023492 Jy
! Component: 1350  -  total flux cleaned = 0.000247692 Jy
! Component: 1400  -  total flux cleaned = 0.000322156 Jy
! Component: 1450  -  total flux cleaned = 0.000297498 Jy
! Component: 1500  -  total flux cleaned = 0.000285227 Jy
! Component: 1550  -  total flux cleaned = 0.000321593 Jy
! Component: 1600  -  total flux cleaned = 0.000273709 Jy
! Component: 1650  -  total flux cleaned = 0.000368965 Jy
! Component: 1700  -  total flux cleaned = 0.000357032 Jy
! Component: 1750  -  total flux cleaned = 0.000333597 Jy
! Component: 1800  -  total flux cleaned = 0.000368384 Jy
! Component: 1850  -  total flux cleaned = 0.00039149 Jy
! Component: 1900  -  total flux cleaned = 0.000368497 Jy
! Component: 1950  -  total flux cleaned = 0.000402525 Jy
! Component: 2000  -  total flux cleaned = 0.000436178 Jy
! Component: 2050  -  total flux cleaned = 0.000368992 Jy
! Component: 2100  -  total flux cleaned = 0.000379965 Jy
! Component: 2150  -  total flux cleaned = 0.000357857 Jy
! Component: 2200  -  total flux cleaned = 0.000336021 Jy
! Component: 2250  -  total flux cleaned = 0.000368645 Jy
! Component: 2300  -  total flux cleaned = 0.000325434 Jy
! Component: 2350  -  total flux cleaned = 0.00031484 Jy
! Component: 2400  -  total flux cleaned = 0.000293544 Jy
! Component: 2450  -  total flux cleaned = 0.000272444 Jy
! Component: 2500  -  total flux cleaned = 0.000282927 Jy
! Component: 2550  -  total flux cleaned = 0.000230687 Jy
! Component: 2600  -  total flux cleaned = 0.000251556 Jy
! Component: 2650  -  total flux cleaned = 0.000230885 Jy
! Component: 2700  -  total flux cleaned = 0.000200195 Jy
! Component: 2750  -  total flux cleaned = 0.000179786 Jy
! Component: 2800  -  total flux cleaned = 0.000179861 Jy
! Component: 2850  -  total flux cleaned = 0.000159714 Jy
! Component: 2900  -  total flux cleaned = 0.000169824 Jy
! Component: 2950  -  total flux cleaned = 0.0001797 Jy
! Component: 3000  -  total flux cleaned = 0.000179711 Jy
! Component: 3050  -  total flux cleaned = 0.00015013 Jy
! Component: 3100  -  total flux cleaned = 0.000150174 Jy
! Component: 3150  -  total flux cleaned = 0.000101533 Jy
! Component: 3200  -  total flux cleaned = 0.000111113 Jy
! Component: 3250  -  total flux cleaned = 8.22116e-05 Jy
! Component: 3300  -  total flux cleaned = 3.45355e-05 Jy
! Component: 3350  -  total flux cleaned = 5.34108e-05 Jy
! Component: 3400  -  total flux cleaned = 2.50772e-05 Jy
! Component: 3450  -  total flux cleaned = 2.50561e-05 Jy
! Component: 3500  -  total flux cleaned = -4.04087e-05 Jy
! Component: 3550  -  total flux cleaned = -8.6911e-05 Jy
! Component: 3600  -  total flux cleaned = -5.90835e-05 Jy
! Component: 3650  -  total flux cleaned = -7.74151e-05 Jy
! Component: 3700  -  total flux cleaned = -0.000104852 Jy
! Component: 3750  -  total flux cleaned = -0.000150414 Jy
! Component: 3800  -  total flux cleaned = -0.000150392 Jy
! Component: 3850  -  total flux cleaned = -0.00020436 Jy
! Component: 3900  -  total flux cleaned = -0.000222322 Jy
! Component: 3950  -  total flux cleaned = -0.000240162 Jy
! Component: 4000  -  total flux cleaned = -0.000213513 Jy
! Component: 4050  -  total flux cleaned = -0.00024884 Jy
! Total flux subtracted in 4096 components = -0.000248884 Jy
! Clean residual min=-0.000535 max=0.000462 Jy/beam
! Clean residual mean=-0.000001 rms=0.000152 Jy/beam
! Combined flux in latest and established models = 0.114452 Jy
keep
! Adding 309 model components to the UV plane model.
! The established model now contains 411 components and 0.114453 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0151+2517_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8912 x 1.847 at -2.424 degrees (North through East)
! Clean map  min=-0.00086161  max=0.083151 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0151+2517_X_map.fits
wmodel /vlbi/uf001/uva//J0151+2517_X_map.mod
! Writing 411 model components to file: /vlbi/uf001/uva//J0151+2517_X_map.mod
wobs   /vlbi/uf001/uva//J0151+2517_X_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0151+2517_X_uvs.fits
wwins  /vlbi/uf001/uva//J0151+2517_X_map.win
! wwins: Wrote 5 windows to /vlbi/uf001/uva//J0151+2517_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0831513 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000151692 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.547286 0.547286 1.09457 2.18914 4.37829 8.75657 17.5131 35.0263 70.0526
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.083 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  548.159 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0151+2517_X_dfm.log closed on Sun Jan 13 21:08:23 2019