! Started logfile: /vlbi/uf001/uva//J0144+2705_S_dfm.log on Sun Jan 13 21:05:50 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J0144+2705_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0144+2705_S_uva.fits
! AN table 1: 57 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.830409 visibilities/baseline/integration-bin.
! Found source: J0144+2705
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 5112 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0144+2705_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 94 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 94 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 94 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.009646Jy  sigma=22.895340
! Fit after  self-cal, rms=0.873744Jy  sigma=19.766424
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.607 mas, bmaj=5.605 mas, bpa=-4.352 degrees
! Estimated noise=0.59745 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0945888 Jy
! Component: 100  -  total flux cleaned = 0.121531 Jy
! Total flux subtracted in 100 components = 0.121531 Jy
! Clean residual min=-0.007035 max=0.016504 Jy/beam
! Clean residual mean=-0.000016 rms=0.002136 Jy/beam
! Combined flux in latest and established models = 0.121531 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.121531 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070687Jy  sigma=1.481803
! Fit after  self-cal, rms=0.070634Jy  sigma=1.480728
! Inverting map 
! Added new window around map position (-4, 1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0168913 Jy
! Component: 100  -  total flux cleaned = 0.02756 Jy
! Total flux subtracted in 100 components = 0.02756 Jy
! Clean residual min=-0.005054 max=0.010163 Jy/beam
! Clean residual mean=-0.000011 rms=0.001523 Jy/beam
! Combined flux in latest and established models = 0.149091 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 22 components and 0.149091 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064957Jy  sigma=1.352559
! Fit after  self-cal, rms=0.064768Jy  sigma=1.349073
! Inverting map 
! Added new window around map position (-9, 0.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0103678 Jy
! Component: 100  -  total flux cleaned = 0.0175534 Jy
! Total flux subtracted in 100 components = 0.0175534 Jy
! Clean residual min=-0.004252 max=0.005373 Jy/beam
! Clean residual mean=-0.000008 rms=0.001185 Jy/beam
! Combined flux in latest and established models = 0.166645 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 40 components and 0.166645 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062198Jy  sigma=1.291956
! Fit after  self-cal, rms=0.062060Jy  sigma=1.289536
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.041 mas, bmaj=6.177 mas, bpa=-2.612 degrees
! Estimated noise=0.476845 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00912112 Jy
! Component: 100  -  total flux cleaned = 0.0158128 Jy
! Component: 150  -  total flux cleaned = 0.0210844 Jy
! Component: 200  -  total flux cleaned = 0.0253678 Jy
! Total flux subtracted in 200 components = 0.0253678 Jy
! Clean residual min=-0.003586 max=0.005306 Jy/beam
! Clean residual mean=-0.000010 rms=0.001109 Jy/beam
! Combined flux in latest and established models = 0.192012 Jy
! Performing phase self-cal
! Adding 76 model components to the UV plane model.
! The established model now contains 104 components and 0.192012 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060075Jy  sigma=1.245930
! Fit after  self-cal, rms=0.059954Jy  sigma=1.243872
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.041 x 6.177 at -2.612 degrees (North through East)
! Clean map  min=-0.0033527  max=0.12611 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     HN        1.04     KP        0.94     LA        0.93     
!   MK        1.02     NL        1.04     OV        0.98     PT        0.94     
!   SC        1.05     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     HN        1.03     KP        0.95     LA        0.95     
!   MK        1.01     NL        1.09     OV        0.89     PT        0.94     
!   SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     HN        1.01     KP        0.94     LA        0.95     
!   MK        1.02     NL        1.10     OV        0.98     PT        0.96     
!   SC        1.05     
! 
! 
! Fit before self-cal, rms=0.059954Jy  sigma=1.243872
! Fit after  self-cal, rms=0.058704Jy  sigma=1.223149
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.078 mas, bmaj=6.254 mas, bpa=-2.625 degrees
! Estimated noise=0.473205 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-13.5, -3).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00437427 Jy
! Component: 100  -  total flux cleaned = 0.0065023 Jy
! Component: 150  -  total flux cleaned = 0.0074941 Jy
! Component: 200  -  total flux cleaned = 0.00800514 Jy
! Total flux subtracted in 200 components = 0.00800514 Jy
! Clean residual min=-0.002584 max=0.003043 Jy/beam
! Clean residual mean=-0.000003 rms=0.000675 Jy/beam
! Combined flux in latest and established models = 0.200017 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 125 components and 0.200017 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058342Jy  sigma=1.215505
! Fit after  self-cal, rms=0.058276Jy  sigma=1.213906
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058276Jy  sigma=1.213906
! Fit after  self-cal, rms=0.057854Jy  sigma=1.200209
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.075 mas, bmaj=6.246 mas, bpa=-2.492 degrees
! Estimated noise=0.474255 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0020289 Jy
! Component: 100  -  total flux cleaned = 0.00322369 Jy
! Component: 150  -  total flux cleaned = 0.0036284 Jy
! Component: 200  -  total flux cleaned = 0.00401467 Jy
! Total flux subtracted in 200 components = 0.00401467 Jy
! Clean residual min=-0.002280 max=0.002741 Jy/beam
! Clean residual mean=-0.000001 rms=0.000537 Jy/beam
! Combined flux in latest and established models = 0.204032 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 149 components and 0.204032 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057757Jy  sigma=1.198257
! Fit after  self-cal, rms=0.057750Jy  sigma=1.197904
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-14.5, 18).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00215728 Jy
! Component: 100  -  total flux cleaned = 0.00321181 Jy
! Component: 150  -  total flux cleaned = 0.00382617 Jy
! Component: 200  -  total flux cleaned = 0.0042688 Jy
! Total flux subtracted in 200 components = 0.0042688 Jy
! Clean residual min=-0.002059 max=0.002018 Jy/beam
! Clean residual mean=-0.000001 rms=0.000491 Jy/beam
! Combined flux in latest and established models = 0.208301 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 169 components and 0.208301 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057642Jy  sigma=1.195879
! Fit after  self-cal, rms=0.057640Jy  sigma=1.195803
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057640Jy  sigma=1.195803
! Fit after  self-cal, rms=0.057716Jy  sigma=1.195286
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.079 mas, bmaj=6.25 mas, bpa=-2.419 degrees
! Estimated noise=0.475233 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00110293 Jy
! Component: 100  -  total flux cleaned = 0.00181474 Jy
! Component: 150  -  total flux cleaned = 0.00216882 Jy
! Component: 200  -  total flux cleaned = 0.0023594 Jy
! Total flux subtracted in 200 components = 0.0023594 Jy
! Clean residual min=-0.001993 max=0.002075 Jy/beam
! Clean residual mean=-0.000001 rms=0.000467 Jy/beam
! Combined flux in latest and established models = 0.21066 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 183 components and 0.21066 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057677Jy  sigma=1.194585
! Fit after  self-cal, rms=0.057676Jy  sigma=1.194556
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-97.5, 100.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000400337 Jy
! Component: 100  -  total flux cleaned = -0.000252226 Jy
! Component: 150  -  total flux cleaned = -0.000609159 Jy
! Component: 200  -  total flux cleaned = -0.000813211 Jy
! Total flux subtracted in 200 components = -0.000813211 Jy
! Clean residual min=-0.001873 max=0.001829 Jy/beam
! Clean residual mean=-0.000002 rms=0.000436 Jy/beam
! Combined flux in latest and established models = 0.209847 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 208 components and 0.209847 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057580Jy  sigma=1.192836
! Fit after  self-cal, rms=0.057575Jy  sigma=1.192746
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057575Jy  sigma=1.192746
! Fit after  self-cal, rms=0.057572Jy  sigma=1.192585
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.495 mas, bmaj=9.472 mas, bpa=-6.294 degrees
! Estimated noise=0.625204 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00065168 Jy
! Component: 100  -  total flux cleaned = 0.00108008 Jy
! Component: 150  -  total flux cleaned = 0.00122347 Jy
! Component: 200  -  total flux cleaned = 0.00130724 Jy
! Total flux subtracted in 200 components = 0.00130724 Jy
! Clean residual min=-0.001929 max=0.001890 Jy/beam
! Clean residual mean=-0.000004 rms=0.000486 Jy/beam
! Combined flux in latest and established models = 0.211154 Jy
selfcal
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 242 components and 0.211154 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057553Jy  sigma=1.192196
! Fit after  self-cal, rms=0.057552Jy  sigma=1.192137
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000539505 Jy
! Component: 100  -  total flux cleaned = 0.000643535 Jy
! Component: 150  -  total flux cleaned = 0.000699119 Jy
! Component: 200  -  total flux cleaned = 0.000732322 Jy
! Total flux subtracted in 200 components = 0.000732322 Jy
! Clean residual min=-0.001897 max=0.001791 Jy/beam
! Clean residual mean=-0.000003 rms=0.000476 Jy/beam
! Combined flux in latest and established models = 0.211887 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 247 components and 0.211887 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057542Jy  sigma=1.192011
! Fit after  self-cal, rms=0.057542Jy  sigma=1.191985
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.08 mas, bmaj=6.253 mas, bpa=-2.421 degrees
! Estimated noise=0.475533 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.08 x 6.253 at -2.421 degrees (North through East)
! Clean map  min=-0.0017503  max=0.12393 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.638 mas, bmaj=5.655 mas, bpa=-4.081 degrees
! Estimated noise=0.601259 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0947754 Jy
! Component: 100  -  total flux cleaned = 0.122509 Jy
! Component: 150  -  total flux cleaned = 0.139199 Jy
! Component: 200  -  total flux cleaned = 0.151269 Jy
! Total flux subtracted in 200 components = 0.151269 Jy
! Clean residual min=-0.004907 max=0.007023 Jy/beam
! Clean residual mean=-0.000006 rms=0.001358 Jy/beam
! Combined flux in latest and established models = 0.151269 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.151269 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.08 mas, bmaj=6.253 mas, bpa=-2.421 degrees
! Estimated noise=0.475533 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0124372 Jy
! Component: 100  -  total flux cleaned = 0.0213563 Jy
! Component: 150  -  total flux cleaned = 0.0280248 Jy
! Component: 200  -  total flux cleaned = 0.0331653 Jy
! Total flux subtracted in 200 components = 0.0331653 Jy
! Clean residual min=-0.003001 max=0.003346 Jy/beam
! Clean residual mean=-0.000004 rms=0.000840 Jy/beam
! Combined flux in latest and established models = 0.184435 Jy
! Adding 50 model components to the UV plane model.
! The established model now contains 60 components and 0.184435 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.495 mas, bmaj=9.472 mas, bpa=-6.294 degrees
! Estimated noise=0.625204 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00834107 Jy
! Component: 100  -  total flux cleaned = 0.0135301 Jy
! Component: 150  -  total flux cleaned = 0.0167629 Jy
! Component: 200  -  total flux cleaned = 0.0189146 Jy
! Total flux subtracted in 200 components = 0.0189146 Jy
! Clean residual min=-0.002549 max=0.002374 Jy/beam
! Clean residual mean=-0.000005 rms=0.000695 Jy/beam
! Combined flux in latest and established models = 0.203349 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00170007 Jy
! Component: 100  -  total flux cleaned = 0.00286098 Jy
! Component: 150  -  total flux cleaned = 0.00376337 Jy
! Component: 200  -  total flux cleaned = 0.00454151 Jy
! Total flux subtracted in 200 components = 0.00454151 Jy
! Clean residual min=-0.002194 max=0.001841 Jy/beam
! Clean residual mean=-0.000004 rms=0.000532 Jy/beam
! Combined flux in latest and established models = 0.207891 Jy
! Adding 130 model components to the UV plane model.
! The established model now contains 178 components and 0.207891 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.08 mas, bmaj=6.253 mas, bpa=-2.421 degrees
! Estimated noise=0.475533 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00120787 Jy
! Component: 100  -  total flux cleaned = 0.00142547 Jy
! Component: 150  -  total flux cleaned = 0.00170856 Jy
! Component: 200  -  total flux cleaned = 0.00205035 Jy
! Total flux subtracted in 200 components = 0.00205035 Jy
! Clean residual min=-0.001913 max=0.001877 Jy/beam
! Clean residual mean=-0.000002 rms=0.000446 Jy/beam
! Combined flux in latest and established models = 0.209941 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 206 components and 0.209941 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057610Jy  sigma=1.193675
! Fit after  self-cal, rms=0.057598Jy  sigma=1.193455
wmodel J0144+2705_S_map.mod
! Writing 206 model components to file: J0144+2705_S_map.mod
wobs   J0144+2705_S_uvs.fits
! Writing UV FITS file: J0144+2705_S_uvs.fits
wwins  J0144+2705_S_map.win
! wwins: Wrote 6 windows to J0144+2705_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000291883 Jy
! Component: 100  -  total flux cleaned = -0.000488561 Jy
! Component: 150  -  total flux cleaned = -0.000737975 Jy
! Component: 200  -  total flux cleaned = -0.00103744 Jy
! Component: 250  -  total flux cleaned = -0.00129686 Jy
! Component: 300  -  total flux cleaned = -0.0014652 Jy
! Component: 350  -  total flux cleaned = -0.00157364 Jy
! Component: 400  -  total flux cleaned = -0.00162751 Jy
! Component: 450  -  total flux cleaned = -0.00167913 Jy
! Component: 500  -  total flux cleaned = -0.00160474 Jy
! Component: 550  -  total flux cleaned = -0.00170265 Jy
! Component: 600  -  total flux cleaned = -0.00167787 Jy
! Component: 650  -  total flux cleaned = -0.0016775 Jy
! Component: 700  -  total flux cleaned = -0.00160871 Jy
! Component: 750  -  total flux cleaned = -0.00156394 Jy
! Component: 800  -  total flux cleaned = -0.00158533 Jy
! Component: 850  -  total flux cleaned = -0.00160661 Jy
! Component: 900  -  total flux cleaned = -0.0016072 Jy
! Component: 950  -  total flux cleaned = -0.00168924 Jy
! Component: 1000  -  total flux cleaned = -0.00172932 Jy
! Component: 1050  -  total flux cleaned = -0.00170893 Jy
! Component: 1100  -  total flux cleaned = -0.00165049 Jy
! Component: 1150  -  total flux cleaned = -0.00163158 Jy
! Component: 1200  -  total flux cleaned = -0.00161267 Jy
! Component: 1250  -  total flux cleaned = -0.00164991 Jy
! Component: 1300  -  total flux cleaned = -0.00157575 Jy
! Component: 1350  -  total flux cleaned = -0.00155733 Jy
! Component: 1400  -  total flux cleaned = -0.00153984 Jy
! Component: 1450  -  total flux cleaned = -0.00155745 Jy
! Component: 1500  -  total flux cleaned = -0.00148718 Jy
! Component: 1550  -  total flux cleaned = -0.00152198 Jy
! Component: 1600  -  total flux cleaned = -0.00148746 Jy
! Component: 1650  -  total flux cleaned = -0.00148715 Jy
! Component: 1700  -  total flux cleaned = -0.00145398 Jy
! Component: 1750  -  total flux cleaned = -0.00140445 Jy
! Component: 1800  -  total flux cleaned = -0.00142057 Jy
! Component: 1850  -  total flux cleaned = -0.00135576 Jy
! Component: 1900  -  total flux cleaned = -0.00137166 Jy
! Component: 1950  -  total flux cleaned = -0.00130796 Jy
! Component: 2000  -  total flux cleaned = -0.00132342 Jy
! Component: 2050  -  total flux cleaned = -0.00127682 Jy
! Component: 2100  -  total flux cleaned = -0.00126112 Jy
! Component: 2150  -  total flux cleaned = -0.00126119 Jy
! Component: 2200  -  total flux cleaned = -0.00118611 Jy
! Component: 2250  -  total flux cleaned = -0.00120109 Jy
! Component: 2300  -  total flux cleaned = -0.00120094 Jy
! Component: 2350  -  total flux cleaned = -0.00117197 Jy
! Component: 2400  -  total flux cleaned = -0.00125897 Jy
! Component: 2450  -  total flux cleaned = -0.00121583 Jy
! Component: 2500  -  total flux cleaned = -0.00123031 Jy
! Component: 2550  -  total flux cleaned = -0.00124419 Jy
! Component: 2600  -  total flux cleaned = -0.00121636 Jy
! Component: 2650  -  total flux cleaned = -0.00127166 Jy
! Component: 2700  -  total flux cleaned = -0.00129904 Jy
! Component: 2750  -  total flux cleaned = -0.00128557 Jy
! Component: 2800  -  total flux cleaned = -0.00124534 Jy
! Component: 2850  -  total flux cleaned = -0.00128535 Jy
! Component: 2900  -  total flux cleaned = -0.0013249 Jy
! Component: 2950  -  total flux cleaned = -0.00127265 Jy
! Component: 3000  -  total flux cleaned = -0.00132458 Jy
! Component: 3050  -  total flux cleaned = -0.00136329 Jy
! Component: 3100  -  total flux cleaned = -0.00135064 Jy
! Component: 3150  -  total flux cleaned = -0.00133794 Jy
! Component: 3200  -  total flux cleaned = -0.00136311 Jy
! Component: 3250  -  total flux cleaned = -0.00137562 Jy
! Component: 3300  -  total flux cleaned = -0.00138808 Jy
! Component: 3350  -  total flux cleaned = -0.0014002 Jy
! Component: 3400  -  total flux cleaned = -0.00138825 Jy
! Component: 3450  -  total flux cleaned = -0.00142445 Jy
! Component: 3500  -  total flux cleaned = -0.0014124 Jy
! Component: 3550  -  total flux cleaned = -0.00142444 Jy
! Component: 3600  -  total flux cleaned = -0.00140092 Jy
! Component: 3650  -  total flux cleaned = -0.00143603 Jy
! Component: 3700  -  total flux cleaned = -0.00144769 Jy
! Component: 3750  -  total flux cleaned = -0.00147087 Jy
! Component: 3800  -  total flux cleaned = -0.00147102 Jy
! Component: 3850  -  total flux cleaned = -0.00149385 Jy
! Component: 3900  -  total flux cleaned = -0.00157295 Jy
! Component: 3950  -  total flux cleaned = -0.00152802 Jy
! Component: 4000  -  total flux cleaned = -0.00160611 Jy
! Component: 4050  -  total flux cleaned = -0.00163925 Jy
! Total flux subtracted in 4096 components = -0.00162829 Jy
! Clean residual min=-0.000733 max=0.000609 Jy/beam
! Clean residual mean=-0.000000 rms=0.000192 Jy/beam
! Combined flux in latest and established models = 0.208313 Jy
keep
! Adding 264 model components to the UV plane model.
! The established model now contains 470 components and 0.208313 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0144+2705_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.08 x 6.253 at -2.421 degrees (North through East)
! Clean map  min=-0.001723  max=0.12452 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0144+2705_S_map.fits
wmodel /vlbi/uf001/uva//J0144+2705_S_map.mod
! Writing 470 model components to file: /vlbi/uf001/uva//J0144+2705_S_map.mod
wobs   /vlbi/uf001/uva//J0144+2705_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0144+2705_S_uvs.fits
wwins  /vlbi/uf001/uva//J0144+2705_S_map.win
! wwins: Wrote 7 windows to /vlbi/uf001/uva//J0144+2705_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.124517 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000191219 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.460703 0.460703 0.921407 1.84281 3.68563 7.37125 14.7425 29.485 58.97
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.124 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  651.178 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0144+2705_S_dfm.log closed on Sun Jan 13 21:05:54 2019