! Started logfile: /vlbi/uf001/uva//J0143+1215_X_dfm.log on Sun Jan 13 21:05:08 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /vlbi/uf001/uva//J0143+1215_X_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0143+1215_X_uva.fits
! AN table 1: 87 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.861047 visibilities/baseline/integration-bin.
! Found source: J0143+1215
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 40452 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0143+1215_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 86 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 86 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 86 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 86 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 86 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 86 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 86 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 86 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 86 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 86 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 86 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 86 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.007496Jy  sigma=23.940395
! Fit after  self-cal, rms=0.933731Jy  sigma=22.143723
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6876 mas, bmaj=1.669 mas, bpa=-2.253 degrees
! Estimated noise=0.334295 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0459442 Jy
! Component: 100  -  total flux cleaned = 0.0660494 Jy
! Total flux subtracted in 100 components = 0.0660494 Jy
! Clean residual min=-0.003822 max=0.009948 Jy/beam
! Clean residual mean=0.000000 rms=0.001084 Jy/beam
! Combined flux in latest and established models = 0.0660494 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.0660494 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063744Jy  sigma=1.433024
! Fit after  self-cal, rms=0.062593Jy  sigma=1.407065
! Inverting map 
! Added new window around map position (0.8, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0135931 Jy
! Component: 100  -  total flux cleaned = 0.021156 Jy
! Total flux subtracted in 100 components = 0.021156 Jy
! Clean residual min=-0.003071 max=0.009976 Jy/beam
! Clean residual mean=0.000000 rms=0.000792 Jy/beam
! Combined flux in latest and established models = 0.0872054 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 9 components and 0.0872054 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058309Jy  sigma=1.294577
! Fit after  self-cal, rms=0.058210Jy  sigma=1.292487
! Inverting map 
! Added new window around map position (2.8, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0087321 Jy
! Component: 100  -  total flux cleaned = 0.013731 Jy
! Total flux subtracted in 100 components = 0.013731 Jy
! Clean residual min=-0.002317 max=0.003294 Jy/beam
! Clean residual mean=-0.000000 rms=0.000580 Jy/beam
! Combined flux in latest and established models = 0.100936 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 18 components and 0.100936 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056336Jy  sigma=1.243212
! Fit after  self-cal, rms=0.056219Jy  sigma=1.240122
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00430028 Jy
! Component: 100  -  total flux cleaned = 0.00739176 Jy
! Total flux subtracted in 100 components = 0.00739176 Jy
! Clean residual min=-0.001934 max=0.002755 Jy/beam
! Clean residual mean=-0.000001 rms=0.000498 Jy/beam
! Combined flux in latest and established models = 0.108328 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 23 components and 0.108328 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055638Jy  sigma=1.224480
! Fit after  self-cal, rms=0.055619Jy  sigma=1.223933
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8655 mas, bmaj=1.948 mas, bpa=-2.294 degrees
! Estimated noise=0.153003 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.8, 0.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00489473 Jy
! Component: 100  -  total flux cleaned = 0.0081429 Jy
! Component: 150  -  total flux cleaned = 0.0106327 Jy
! Component: 200  -  total flux cleaned = 0.0125871 Jy
! Total flux subtracted in 200 components = 0.0125871 Jy
! Clean residual min=-0.001686 max=0.002229 Jy/beam
! Clean residual mean=-0.000001 rms=0.000418 Jy/beam
! Combined flux in latest and established models = 0.120915 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 53 components and 0.120915 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055110Jy  sigma=1.209515
! Fit after  self-cal, rms=0.055080Jy  sigma=1.208553
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8655 x 1.948 at -2.294 degrees (North through East)
! Clean map  min=-0.0016412  max=0.067032 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.97     HN        0.98     KP        1.01     
!   LA        0.99     MK        1.00     NL        1.08     OV        0.91     
!   PT        0.94     SC        0.95     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.00     HN        0.99     KP        0.97     
!   LA        0.96     MK        1.01     NL        1.10     OV        0.91     
!   PT        0.93     SC        0.97     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        0.98     KP        1.02     
!   LA        0.96     MK        1.00     NL        1.08     OV        0.93     
!   PT        0.93     SC        0.94     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        0.99     KP        1.03     
!   LA        0.98     MK        1.08     NL        1.10     OV        0.90     
!   PT        0.94     SC        0.97     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.99     HN        0.97     KP        0.98     
!   LA        0.98     MK        0.99     NL        1.07     OV        0.92     
!   PT        0.94     SC        0.98     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.01     HN        1.03     KP        1.00     
!   LA        1.00     MK        0.97     NL        1.06     OV        0.89     
!   PT        0.96     SC        0.97     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.01     HN        0.98     KP        1.01     
!   LA        0.96     MK        1.03     NL        1.08     OV        0.91     
!   PT        0.96     SC        0.93     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.00     HN        1.02     KP        1.03     
!   LA        0.99     MK        1.01     NL        1.13     OV        0.88     
!   PT        0.96     SC        0.95     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.99     HN        1.04     KP        1.00     
!   LA        0.98     MK        0.97     NL        1.10     OV        0.92     
!   PT        0.95     SC        0.99     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.00     HN        0.98     KP        1.00     
!   LA        0.96     MK        0.99     NL        1.11     OV        0.91     
!   PT        0.94     SC        0.91     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        0.98     HN        0.93     KP        0.98     
!   LA        0.98     MK        1.02     NL        1.11     OV        0.93     
!   PT        0.95     SC        0.97     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.96     HN        0.96     KP        1.00     
!   LA        1.02     MK        1.02     NL        1.06     OV        0.93     
!   PT        0.94     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.055080Jy  sigma=1.208553
! Fit after  self-cal, rms=0.053617Jy  sigma=1.200388
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8645 mas, bmaj=1.959 mas, bpa=-1.661 degrees
! Estimated noise=0.150174 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00108089 Jy
! Component: 100  -  total flux cleaned = 0.000985228 Jy
! Component: 150  -  total flux cleaned = 0.000959506 Jy
! Component: 200  -  total flux cleaned = 0.00095829 Jy
! Total flux subtracted in 200 components = 0.00095829 Jy
! Clean residual min=-0.000798 max=0.000944 Jy/beam
! Clean residual mean=-0.000000 rms=0.000205 Jy/beam
! Combined flux in latest and established models = 0.121874 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 78 components and 0.121874 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053577Jy  sigma=1.199243
! Fit after  self-cal, rms=0.053597Jy  sigma=1.198942
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053597Jy  sigma=1.198942
! Fit after  self-cal, rms=0.053918Jy  sigma=1.196128
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8624 mas, bmaj=1.958 mas, bpa=-1.798 degrees
! Estimated noise=0.149868 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000379917 Jy
! Component: 100  -  total flux cleaned = 0.000399908 Jy
! Component: 150  -  total flux cleaned = 0.000366676 Jy
! Component: 200  -  total flux cleaned = 0.000338174 Jy
! Total flux subtracted in 200 components = 0.000338174 Jy
! Clean residual min=-0.000697 max=0.000881 Jy/beam
! Clean residual mean=-0.000000 rms=0.000178 Jy/beam
! Combined flux in latest and established models = 0.122212 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 91 components and 0.122212 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053905Jy  sigma=1.195794
! Fit after  self-cal, rms=0.053924Jy  sigma=1.195697
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (5, -35.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000784061 Jy
! Component: 100  -  total flux cleaned = 0.000953393 Jy
! Component: 150  -  total flux cleaned = 0.000968803 Jy
! Component: 200  -  total flux cleaned = 0.000969359 Jy
! Total flux subtracted in 200 components = 0.000969359 Jy
! Clean residual min=-0.000682 max=0.000777 Jy/beam
! Clean residual mean=0.000000 rms=0.000170 Jy/beam
! Combined flux in latest and established models = 0.123181 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 108 components and 0.123181 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053909Jy  sigma=1.195330
! Fit after  self-cal, rms=0.053908Jy  sigma=1.195305
! Inverting map 
! Added new window around map position (-7.2, -42.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000647163 Jy
! Component: 100  -  total flux cleaned = 0.000775868 Jy
! Component: 150  -  total flux cleaned = 0.00081687 Jy
! Component: 200  -  total flux cleaned = 0.000829473 Jy
! Total flux subtracted in 200 components = 0.000829473 Jy
! Clean residual min=-0.000696 max=0.000737 Jy/beam
! Clean residual mean=0.000000 rms=0.000165 Jy/beam
! Combined flux in latest and established models = 0.124011 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 126 components and 0.124011 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053897Jy  sigma=1.195055
! Fit after  self-cal, rms=0.053896Jy  sigma=1.195039
! Inverting map 
! Added new window around map position (-34.8, 7.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000629542 Jy
! Component: 100  -  total flux cleaned = 0.000793941 Jy
! Component: 150  -  total flux cleaned = 0.000922579 Jy
! Component: 200  -  total flux cleaned = 0.000946127 Jy
! Total flux subtracted in 200 components = 0.000946127 Jy
! Clean residual min=-0.000674 max=0.000661 Jy/beam
! Clean residual mean=0.000000 rms=0.000161 Jy/beam
! Combined flux in latest and established models = 0.124957 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 144 components and 0.124957 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053886Jy  sigma=1.194797
! Fit after  self-cal, rms=0.053885Jy  sigma=1.194783
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053885Jy  sigma=1.194783
! Fit after  self-cal, rms=0.053838Jy  sigma=1.194648
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.86 mas, bmaj=1.955 mas, bpa=-1.758 degrees
! Estimated noise=0.149475 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000171722 Jy
! Component: 100  -  total flux cleaned = 0.000288823 Jy
! Component: 150  -  total flux cleaned = 0.000349305 Jy
! Component: 200  -  total flux cleaned = 0.000361032 Jy
! Total flux subtracted in 200 components = 0.000361032 Jy
! Clean residual min=-0.000645 max=0.000654 Jy/beam
! Clean residual mean=0.000000 rms=0.000155 Jy/beam
! Combined flux in latest and established models = 0.125318 Jy
selfcal
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 152 components and 0.125318 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053832Jy  sigma=1.194520
! Fit after  self-cal, rms=0.053836Jy  sigma=1.194510
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.51044e-05 Jy
! Component: 100  -  total flux cleaned = 3.53149e-05 Jy
! Component: 150  -  total flux cleaned = 3.56298e-05 Jy
! Component: 200  -  total flux cleaned = 3.54782e-05 Jy
! Total flux subtracted in 200 components = 3.54782e-05 Jy
! Clean residual min=-0.000651 max=0.000642 Jy/beam
! Clean residual mean=0.000000 rms=0.000154 Jy/beam
! Combined flux in latest and established models = 0.125353 Jy
! Performing phase self-cal
! Adding 47 model components to the UV plane model.
! The established model now contains 159 components and 0.125353 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053832Jy  sigma=1.194425
! Fit after  self-cal, rms=0.053832Jy  sigma=1.194424
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053832Jy  sigma=1.194424
! Fit after  self-cal, rms=0.053795Jy  sigma=1.194413
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.136 mas, bmaj=3.005 mas, bpa=3.738 degrees
! Estimated noise=0.191044 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000119863 Jy
! Component: 100  -  total flux cleaned = -0.000159496 Jy
! Component: 150  -  total flux cleaned = -0.000176513 Jy
! Component: 200  -  total flux cleaned = -0.000184352 Jy
! Total flux subtracted in 200 components = -0.000184352 Jy
! Clean residual min=-0.000608 max=0.000628 Jy/beam
! Clean residual mean=0.000000 rms=0.000171 Jy/beam
! Combined flux in latest and established models = 0.125169 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 175 components and 0.125169 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053794Jy  sigma=1.194376
! Fit after  self-cal, rms=0.053794Jy  sigma=1.194373
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.36165e-06 Jy
! Component: 100  -  total flux cleaned = 1.89617e-06 Jy
! Component: 150  -  total flux cleaned = -4.63191e-06 Jy
! Component: 200  -  total flux cleaned = -1.07655e-05 Jy
! Total flux subtracted in 200 components = -1.07655e-05 Jy
! Clean residual min=-0.000601 max=0.000617 Jy/beam
! Clean residual mean=0.000000 rms=0.000169 Jy/beam
! Combined flux in latest and established models = 0.125158 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 186 components and 0.125158 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053793Jy  sigma=1.194360
! Fit after  self-cal, rms=0.053793Jy  sigma=1.194360
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.859 mas, bmaj=1.955 mas, bpa=-1.73 degrees
! Estimated noise=0.149345 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.859 x 1.955 at -1.73 degrees (North through East)
! Clean map  min=-0.00059739  max=0.065497 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6833 mas, bmaj=1.672 mas, bpa=-1.659 degrees
! Estimated noise=0.32596 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0463447 Jy
! Component: 100  -  total flux cleaned = 0.0685358 Jy
! Component: 150  -  total flux cleaned = 0.0821556 Jy
! Component: 200  -  total flux cleaned = 0.0913281 Jy
! Total flux subtracted in 200 components = 0.0913281 Jy
! Clean residual min=-0.002249 max=0.005007 Jy/beam
! Clean residual mean=0.000000 rms=0.000607 Jy/beam
! Combined flux in latest and established models = 0.0913281 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.0913281 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.859 mas, bmaj=1.955 mas, bpa=-1.73 degrees
! Estimated noise=0.149345 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0097848 Jy
! Component: 100  -  total flux cleaned = 0.0160144 Jy
! Component: 150  -  total flux cleaned = 0.0201726 Jy
! Component: 200  -  total flux cleaned = 0.0230202 Jy
! Total flux subtracted in 200 components = 0.0230202 Jy
! Clean residual min=-0.000943 max=0.001561 Jy/beam
! Clean residual mean=0.000000 rms=0.000278 Jy/beam
! Combined flux in latest and established models = 0.114348 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 28 components and 0.114348 Jy
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00197204 Jy
! Component: 100  -  total flux cleaned = 0.00341589 Jy
! Component: 150  -  total flux cleaned = 0.00459163 Jy
! Component: 200  -  total flux cleaned = 0.00558609 Jy
! Total flux subtracted in 200 components = 0.00558609 Jy
! Clean residual min=-0.000697 max=0.000858 Jy/beam
! Clean residual mean=0.000000 rms=0.000188 Jy/beam
! Combined flux in latest and established models = 0.119934 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 55 components and 0.119934 Jy
! Inverting map 
! Added new window around map position (-27.4, -15.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000925922 Jy
! Component: 100  -  total flux cleaned = 0.00166897 Jy
! Component: 150  -  total flux cleaned = 0.00231727 Jy
! Component: 200  -  total flux cleaned = 0.00289241 Jy
! Total flux subtracted in 200 components = 0.00289241 Jy
! Clean residual min=-0.000660 max=0.000751 Jy/beam
! Clean residual mean=0.000000 rms=0.000166 Jy/beam
! Combined flux in latest and established models = 0.122827 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 69 components and 0.122827 Jy
! Inverting map 
! Added new window around map position (-48.8, 6.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000619276 Jy
! Component: 100  -  total flux cleaned = 0.000929037 Jy
! Component: 150  -  total flux cleaned = 0.00115867 Jy
! Component: 200  -  total flux cleaned = 0.00135687 Jy
! Total flux subtracted in 200 components = 0.00135687 Jy
! Clean residual min=-0.000655 max=0.000638 Jy/beam
! Clean residual mean=-0.000000 rms=0.000157 Jy/beam
! Combined flux in latest and established models = 0.124184 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 89 components and 0.124184 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.136 mas, bmaj=3.005 mas, bpa=3.738 degrees
! Estimated noise=0.191044 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000563424 Jy
! Component: 100  -  total flux cleaned = 0.000872554 Jy
! Component: 150  -  total flux cleaned = 0.00100541 Jy
! Component: 200  -  total flux cleaned = 0.00109138 Jy
! Total flux subtracted in 200 components = 0.00109138 Jy
! Clean residual min=-0.000615 max=0.000653 Jy/beam
! Clean residual mean=-0.000000 rms=0.000168 Jy/beam
! Combined flux in latest and established models = 0.125275 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.78939e-05 Jy
! Component: 100  -  total flux cleaned = 8.57149e-05 Jy
! Component: 150  -  total flux cleaned = 0.000118871 Jy
! Component: 200  -  total flux cleaned = 0.000141823 Jy
! Total flux subtracted in 200 components = 0.000141823 Jy
! Clean residual min=-0.000611 max=0.000648 Jy/beam
! Clean residual mean=-0.000000 rms=0.000164 Jy/beam
! Combined flux in latest and established models = 0.125417 Jy
! Adding 53 model components to the UV plane model.
! The established model now contains 132 components and 0.125417 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.859 mas, bmaj=1.955 mas, bpa=-1.73 degrees
! Estimated noise=0.149345 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.88895e-05 Jy
! Component: 100  -  total flux cleaned = 4.86325e-05 Jy
! Component: 150  -  total flux cleaned = 3.42051e-05 Jy
! Component: 200  -  total flux cleaned = 4.79791e-05 Jy
! Total flux subtracted in 200 components = 4.79791e-05 Jy
! Clean residual min=-0.000649 max=0.000600 Jy/beam
! Clean residual mean=-0.000000 rms=0.000148 Jy/beam
! Combined flux in latest and established models = 0.125465 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 146 components and 0.125465 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053784Jy  sigma=1.194178
! Fit after  self-cal, rms=0.053781Jy  sigma=1.194089
wmodel J0143+1215_X_map.mod
! Writing 146 model components to file: J0143+1215_X_map.mod
wobs   J0143+1215_X_uvs.fits
! Writing UV FITS file: J0143+1215_X_uvs.fits
wwins  J0143+1215_X_map.win
! wwins: Wrote 9 windows to J0143+1215_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -9.69654e-05 Jy
! Component: 100  -  total flux cleaned = -0.000108411 Jy
! Component: 150  -  total flux cleaned = -0.00012948 Jy
! Component: 200  -  total flux cleaned = -0.000129339 Jy
! Component: 250  -  total flux cleaned = -0.000109666 Jy
! Component: 300  -  total flux cleaned = -0.000138902 Jy
! Component: 350  -  total flux cleaned = -0.000110229 Jy
! Component: 400  -  total flux cleaned = -7.28468e-05 Jy
! Component: 450  -  total flux cleaned = -7.28559e-05 Jy
! Component: 500  -  total flux cleaned = -6.3673e-05 Jy
! Component: 550  -  total flux cleaned = -5.46498e-05 Jy
! Component: 600  -  total flux cleaned = -3.68308e-05 Jy
! Component: 650  -  total flux cleaned = -2.80791e-05 Jy
! Component: 700  -  total flux cleaned = -1.94347e-05 Jy
! Component: 750  -  total flux cleaned = -1.92609e-05 Jy
! Component: 800  -  total flux cleaned = 1.45281e-05 Jy
! Component: 850  -  total flux cleaned = 2.27955e-05 Jy
! Component: 900  -  total flux cleaned = 6.22879e-06 Jy
! Component: 950  -  total flux cleaned = 3.88891e-05 Jy
! Component: 1000  -  total flux cleaned = 3.08385e-05 Jy
! Component: 1050  -  total flux cleaned = 2.2871e-05 Jy
! Component: 1100  -  total flux cleaned = 4.68071e-05 Jy
! Component: 1150  -  total flux cleaned = 3.90562e-05 Jy
! Component: 1200  -  total flux cleaned = 7.00622e-05 Jy
! Component: 1250  -  total flux cleaned = 3.14675e-05 Jy
! Component: 1300  -  total flux cleaned = 6.20293e-05 Jy
! Component: 1350  -  total flux cleaned = 6.19084e-05 Jy
! Component: 1400  -  total flux cleaned = 3.18933e-05 Jy
! Component: 1450  -  total flux cleaned = 3.18528e-05 Jy
! Component: 1500  -  total flux cleaned = 3.18787e-05 Jy
! Component: 1550  -  total flux cleaned = 2.44844e-05 Jy
! Component: 1600  -  total flux cleaned = 3.18238e-05 Jy
! Component: 1650  -  total flux cleaned = 1.73894e-05 Jy
! Component: 1700  -  total flux cleaned = 5.31779e-05 Jy
! Component: 1750  -  total flux cleaned = 2.47448e-05 Jy
! Component: 1800  -  total flux cleaned = 4.58713e-05 Jy
! Component: 1850  -  total flux cleaned = 6.68451e-05 Jy
! Component: 1900  -  total flux cleaned = 3.20037e-05 Jy
! Component: 1950  -  total flux cleaned = 3.19742e-05 Jy
! Component: 2000  -  total flux cleaned = 2.51111e-05 Jy
! Component: 2050  -  total flux cleaned = 5.23678e-05 Jy
! Component: 2100  -  total flux cleaned = 5.23604e-05 Jy
! Component: 2150  -  total flux cleaned = 2.54732e-05 Jy
! Component: 2200  -  total flux cleaned = 2.54496e-05 Jy
! Component: 2250  -  total flux cleaned = 3.20251e-05 Jy
! Component: 2300  -  total flux cleaned = 1.87924e-05 Jy
! Component: 2350  -  total flux cleaned = -7.46501e-06 Jy
! Component: 2400  -  total flux cleaned = 1.20769e-05 Jy
! Component: 2450  -  total flux cleaned = 2.49529e-05 Jy
! Component: 2500  -  total flux cleaned = 4.42071e-05 Jy
! Component: 2550  -  total flux cleaned = 5.05715e-05 Jy
! Component: 2600  -  total flux cleaned = 5.05166e-05 Jy
! Component: 2650  -  total flux cleaned = 5.67812e-05 Jy
! Component: 2700  -  total flux cleaned = 6.30283e-05 Jy
! Component: 2750  -  total flux cleaned = 5.6836e-05 Jy
! Component: 2800  -  total flux cleaned = 8.16418e-05 Jy
! Component: 2850  -  total flux cleaned = 0.00010629 Jy
! Component: 2900  -  total flux cleaned = 0.000112436 Jy
! Component: 2950  -  total flux cleaned = 0.00010015 Jy
! Component: 3000  -  total flux cleaned = 0.000118414 Jy
! Component: 3050  -  total flux cleaned = 0.00012444 Jy
! Component: 3100  -  total flux cleaned = 0.000112412 Jy
! Component: 3150  -  total flux cleaned = 0.000130324 Jy
! Component: 3200  -  total flux cleaned = 0.000106537 Jy
! Component: 3250  -  total flux cleaned = 0.000130289 Jy
! Component: 3300  -  total flux cleaned = 0.000124407 Jy
! Component: 3350  -  total flux cleaned = 0.000136149 Jy
! Component: 3400  -  total flux cleaned = 0.000159475 Jy
! Component: 3450  -  total flux cleaned = 0.000142087 Jy
! Component: 3500  -  total flux cleaned = 0.000124825 Jy
! Component: 3550  -  total flux cleaned = 0.000147806 Jy
! Component: 3600  -  total flux cleaned = 0.000193621 Jy
! Component: 3650  -  total flux cleaned = 0.000187961 Jy
! Component: 3700  -  total flux cleaned = 0.000204918 Jy
! Component: 3750  -  total flux cleaned = 0.000204903 Jy
! Component: 3800  -  total flux cleaned = 0.00021051 Jy
! Component: 3850  -  total flux cleaned = 0.00022167 Jy
! Component: 3900  -  total flux cleaned = 0.00021055 Jy
! Component: 3950  -  total flux cleaned = 0.000221633 Jy
! Component: 4000  -  total flux cleaned = 0.000221667 Jy
! Component: 4050  -  total flux cleaned = 0.000232691 Jy
! Total flux subtracted in 4096 components = 0.000232703 Jy
! Clean residual min=-0.000360 max=0.000348 Jy/beam
! Clean residual mean=-0.000000 rms=0.000094 Jy/beam
! Combined flux in latest and established models = 0.125697 Jy
keep
! Adding 305 model components to the UV plane model.
! The established model now contains 451 components and 0.125697 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0143+1215_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.859 x 1.955 at -1.73 degrees (North through East)
! Clean map  min=-0.00052735  max=0.065296 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0143+1215_X_map.fits
wmodel /vlbi/uf001/uva//J0143+1215_X_map.mod
! Writing 451 model components to file: /vlbi/uf001/uva//J0143+1215_X_map.mod
wobs   /vlbi/uf001/uva//J0143+1215_X_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0143+1215_X_uvs.fits
wwins  /vlbi/uf001/uva//J0143+1215_X_map.win
! wwins: Wrote 10 windows to /vlbi/uf001/uva//J0143+1215_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0652959 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 9.36648e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.430341 0.430341 0.860681 1.72136 3.44272 6.88545 13.7709 27.5418 55.0836
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0002 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.065 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  697.122 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0143+1215_X_dfm.log closed on Sun Jan 13 21:05:15 2019