! Started logfile: /vlbi/uf001/uva//J0140+4658_X_dfm.log on Sun Jan 13 21:04:19 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J0140+4658_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J0140+4658_X_uva.fits ! AN table 1: 87 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.995402 visibilities/baseline/integration-bin. ! Found source: J0140+4658 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 46764 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0140+4658_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.002185Jy sigma=24.396624 ! Fit after self-cal, rms=0.947406Jy sigma=23.013905 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7151 mas, bmaj=1.156 mas, bpa=-4.945 degrees ! Estimated noise=0.321179 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0371688 Jy ! Component: 100 - total flux cleaned = 0.048104 Jy ! Total flux subtracted in 100 components = 0.048104 Jy ! Clean residual min=-0.004806 max=0.018402 Jy/beam ! Clean residual mean=0.000001 rms=0.001215 Jy/beam ! Combined flux in latest and established models = 0.048104 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.048104 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067270Jy sigma=1.588808 ! Fit after self-cal, rms=0.066233Jy sigma=1.563898 ! Inverting map ! Added new window around map position (12.4, -9.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0161101 Jy ! Component: 100 - total flux cleaned = 0.0237704 Jy ! Total flux subtracted in 100 components = 0.0237704 Jy ! Clean residual min=-0.004113 max=0.007197 Jy/beam ! Clean residual mean=0.000001 rms=0.000872 Jy/beam ! Combined flux in latest and established models = 0.0718744 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 28 components and 0.0718744 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061155Jy sigma=1.432951 ! Fit after self-cal, rms=0.059800Jy sigma=1.401875 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00949993 Jy ! Component: 100 - total flux cleaned = 0.014858 Jy ! Total flux subtracted in 100 components = 0.014858 Jy ! Clean residual min=-0.003287 max=0.004513 Jy/beam ! Clean residual mean=0.000001 rms=0.000686 Jy/beam ! Combined flux in latest and established models = 0.0867323 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 36 components and 0.0867323 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057449Jy sigma=1.341728 ! Fit after self-cal, rms=0.057148Jy sigma=1.334926 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.005317 Jy ! Component: 100 - total flux cleaned = 0.00885228 Jy ! Total flux subtracted in 100 components = 0.00885228 Jy ! Clean residual min=-0.002861 max=0.003965 Jy/beam ! Clean residual mean=0.000000 rms=0.000614 Jy/beam ! Combined flux in latest and established models = 0.0955846 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 44 components and 0.0955846 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056209Jy sigma=1.311271 ! Fit after self-cal, rms=0.056141Jy sigma=1.309714 ! Inverting map ! Added new window around map position (11, -9.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00429023 Jy ! Component: 100 - total flux cleaned = 0.00734283 Jy ! Total flux subtracted in 100 components = 0.00734283 Jy ! Clean residual min=-0.002522 max=0.003339 Jy/beam ! Clean residual mean=0.000001 rms=0.000564 Jy/beam ! Combined flux in latest and established models = 0.102927 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 57 components and 0.102927 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055421Jy sigma=1.292086 ! Fit after self-cal, rms=0.055376Jy sigma=1.291097 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9464 mas, bmaj=1.48 mas, bpa=-2.473 degrees ! Estimated noise=0.138286 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (9, -7.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00709053 Jy ! Component: 100 - total flux cleaned = 0.0123919 Jy ! Component: 150 - total flux cleaned = 0.0166424 Jy ! Component: 200 - total flux cleaned = 0.0201928 Jy ! Total flux subtracted in 200 components = 0.0201928 Jy ! Clean residual min=-0.002260 max=0.003822 Jy/beam ! Clean residual mean=0.000005 rms=0.000674 Jy/beam ! Combined flux in latest and established models = 0.12312 Jy ! Performing phase self-cal ! Adding 61 model components to the UV plane model. ! The established model now contains 109 components and 0.12312 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054032Jy sigma=1.258407 ! Fit after self-cal, rms=0.053918Jy sigma=1.255745 ! Inverting map ! Added new window around map position (11, -7.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00405107 Jy ! Component: 100 - total flux cleaned = 0.00718437 Jy ! Component: 150 - total flux cleaned = 0.00977847 Jy ! Component: 200 - total flux cleaned = 0.0120185 Jy ! Total flux subtracted in 200 components = 0.0120185 Jy ! Clean residual min=-0.001877 max=0.003286 Jy/beam ! Clean residual mean=0.000006 rms=0.000534 Jy/beam ! Combined flux in latest and established models = 0.135139 Jy ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 137 components and 0.135139 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053439Jy sigma=1.244210 ! Fit after self-cal, rms=0.053399Jy sigma=1.243348 ! Inverting map ! Added new window around map position (1.6, 1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00335286 Jy ! Component: 100 - total flux cleaned = 0.00578794 Jy ! Component: 150 - total flux cleaned = 0.00785693 Jy ! Component: 200 - total flux cleaned = 0.00965036 Jy ! Total flux subtracted in 200 components = 0.00965036 Jy ! Clean residual min=-0.001536 max=0.002388 Jy/beam ! Clean residual mean=0.000004 rms=0.000418 Jy/beam ! Combined flux in latest and established models = 0.144789 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 165 components and 0.144789 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053092Jy sigma=1.235503 ! Fit after self-cal, rms=0.053073Jy sigma=1.235155 ! Inverting map ! Added new window around map position (2.8, -1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00244453 Jy ! Component: 100 - total flux cleaned = 0.0041309 Jy ! Component: 150 - total flux cleaned = 0.00560967 Jy ! Component: 200 - total flux cleaned = 0.0069271 Jy ! Total flux subtracted in 200 components = 0.0069271 Jy ! Clean residual min=-0.001348 max=0.001716 Jy/beam ! Clean residual mean=0.000002 rms=0.000349 Jy/beam ! Combined flux in latest and established models = 0.151716 Jy ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 195 components and 0.151716 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052910Jy sigma=1.231129 ! Fit after self-cal, rms=0.052898Jy sigma=1.230914 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9464 x 1.48 at -2.473 degrees (North through East) ! Clean map min=-0.0012862 max=0.050383 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.99 HN 1.01 KP 1.04 ! LA 1.00 MK 1.05 NL 1.07 OV 0.94 ! PT 0.93 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.01 HN 0.99 KP 0.98 ! LA 0.99 MK 1.08 NL 1.08 OV 1.00 ! PT 0.91 SC 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.98 HN 0.99 KP 1.00 ! LA 1.02 MK 0.98 NL 1.04 OV 0.95 ! PT 0.91 SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00 HN 0.97 KP 1.00 ! LA 0.98 MK 1.07 NL 1.10 OV 0.95 ! PT 0.93 SC 0.97 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00 HN 1.00 KP 1.01 ! LA 0.99 MK 1.05 NL 1.09 OV 0.97 ! PT 0.91 SC 0.95 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00 HN 0.97 KP 1.03 ! LA 1.01 MK 1.04 NL 1.07 OV 1.01 ! PT 0.90 SC 0.97 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.01 HN 0.95 KP 0.99 ! LA 1.00 MK 1.00 NL 1.08 OV 0.96 ! PT 0.91 SC 0.99 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.01 HN 0.93 KP 1.03 ! LA 1.01 MK 1.08 NL 1.10 OV 0.99 ! PT 0.92 SC 0.95 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.99 HN 0.97 KP 1.01 ! LA 0.99 MK 1.02 NL 1.09 OV 0.97 ! PT 0.90 SC 1.03 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.01 HN 0.94 KP 1.00 ! LA 1.02 MK 1.07 NL 1.09 OV 0.93 ! PT 0.93 SC 0.98 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.01 HN 1.01 KP 1.00 ! LA 0.98 MK 1.10 NL 1.08 OV 0.99 ! PT 0.93 SC 1.03 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.95 HN 0.96 KP 0.95 ! LA 1.00 MK 1.03 NL 1.11 OV 0.97 ! PT 0.91 SC 0.96 ! ! ! Fit before self-cal, rms=0.052898Jy sigma=1.230914 ! Fit after self-cal, rms=0.052705Jy sigma=1.224778 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9513 mas, bmaj=1.488 mas, bpa=-2.067 degrees ! Estimated noise=0.13911 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (7.8, -10.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00139937 Jy ! Component: 100 - total flux cleaned = 0.00199381 Jy ! Component: 150 - total flux cleaned = 0.00228181 Jy ! Component: 200 - total flux cleaned = 0.00260989 Jy ! Total flux subtracted in 200 components = 0.00260989 Jy ! Clean residual min=-0.001012 max=0.000877 Jy/beam ! Clean residual mean=0.000000 rms=0.000226 Jy/beam ! Combined flux in latest and established models = 0.154326 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 220 components and 0.154326 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052654Jy sigma=1.223506 ! Fit after self-cal, rms=0.052655Jy sigma=1.223273 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052655Jy sigma=1.223273 ! Fit after self-cal, rms=0.052709Jy sigma=1.220691 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9473 mas, bmaj=1.491 mas, bpa=-2.773 degrees ! Estimated noise=0.138934 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000240461 Jy ! Component: 100 - total flux cleaned = 0.000406848 Jy ! Component: 150 - total flux cleaned = 0.000552616 Jy ! Component: 200 - total flux cleaned = 0.000667479 Jy ! Total flux subtracted in 200 components = 0.000667479 Jy ! Clean residual min=-0.000912 max=0.000866 Jy/beam ! Clean residual mean=0.000000 rms=0.000200 Jy/beam ! Combined flux in latest and established models = 0.154994 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 239 components and 0.154994 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052691Jy sigma=1.220277 ! Fit after self-cal, rms=0.052708Jy sigma=1.220166 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000153444 Jy ! Component: 100 - total flux cleaned = 0.000241044 Jy ! Component: 150 - total flux cleaned = 0.000306006 Jy ! Component: 200 - total flux cleaned = 0.000366858 Jy ! Total flux subtracted in 200 components = 0.000366858 Jy ! Clean residual min=-0.000875 max=0.000830 Jy/beam ! Clean residual mean=0.000000 rms=0.000196 Jy/beam ! Combined flux in latest and established models = 0.15536 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 250 components and 0.155361 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052698Jy sigma=1.219952 ! Fit after self-cal, rms=0.052698Jy sigma=1.219944 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052698Jy sigma=1.219944 ! Fit after self-cal, rms=0.052616Jy sigma=1.219894 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9461 mas, bmaj=1.491 mas, bpa=-2.897 degrees ! Estimated noise=0.138707 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.98486e-05 Jy ! Component: 100 - total flux cleaned = 6.74004e-05 Jy ! Component: 150 - total flux cleaned = 0.000142921 Jy ! Component: 200 - total flux cleaned = 0.00021369 Jy ! Total flux subtracted in 200 components = 0.00021369 Jy ! Clean residual min=-0.000859 max=0.000801 Jy/beam ! Clean residual mean=0.000000 rms=0.000190 Jy/beam ! Combined flux in latest and established models = 0.155574 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 260 components and 0.155574 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052608Jy sigma=1.219701 ! Fit after self-cal, rms=0.052610Jy sigma=1.219698 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.52123e-05 Jy ! Component: 100 - total flux cleaned = 0.000138125 Jy ! Component: 150 - total flux cleaned = 0.000188411 Jy ! Component: 200 - total flux cleaned = 0.000236533 Jy ! Total flux subtracted in 200 components = 0.000236533 Jy ! Clean residual min=-0.000835 max=0.000772 Jy/beam ! Clean residual mean=0.000000 rms=0.000187 Jy/beam ! Combined flux in latest and established models = 0.155811 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 268 components and 0.155811 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052604Jy sigma=1.219573 ! Fit after self-cal, rms=0.052604Jy sigma=1.219571 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052604Jy sigma=1.219571 ! Fit after self-cal, rms=0.052512Jy sigma=1.219545 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.166 mas, bmaj=2.512 mas, bpa=0.652 degrees ! Estimated noise=0.175976 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000513656 Jy ! Component: 100 - total flux cleaned = 0.000773549 Jy ! Component: 150 - total flux cleaned = 0.000993411 Jy ! Component: 200 - total flux cleaned = 0.00111123 Jy ! Total flux subtracted in 200 components = 0.00111123 Jy ! Clean residual min=-0.001068 max=0.001008 Jy/beam ! Clean residual mean=0.000001 rms=0.000257 Jy/beam ! Combined flux in latest and established models = 0.156922 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 277 components and 0.156922 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052509Jy sigma=1.219471 ! Fit after self-cal, rms=0.052509Jy sigma=1.219445 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000123223 Jy ! Component: 100 - total flux cleaned = 0.000163711 Jy ! Component: 150 - total flux cleaned = 0.000200975 Jy ! Component: 200 - total flux cleaned = 0.000235522 Jy ! Total flux subtracted in 200 components = 0.000235522 Jy ! Clean residual min=-0.001041 max=0.000972 Jy/beam ! Clean residual mean=0.000001 rms=0.000252 Jy/beam ! Combined flux in latest and established models = 0.157157 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 282 components and 0.157157 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052508Jy sigma=1.219425 ! Fit after self-cal, rms=0.052507Jy sigma=1.219414 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9449 mas, bmaj=1.491 mas, bpa=-3.011 degrees ! Estimated noise=0.138509 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9449 x 1.491 at -3.011 degrees (North through East) ! Clean map min=-0.00074572 max=0.04976 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7125 mas, bmaj=1.164 mas, bpa=-5.345 degrees ! Estimated noise=0.321504 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0415211 Jy ! Component: 100 - total flux cleaned = 0.0609367 Jy ! Component: 150 - total flux cleaned = 0.0727544 Jy ! Component: 200 - total flux cleaned = 0.0812806 Jy ! Total flux subtracted in 200 components = 0.0812806 Jy ! Clean residual min=-0.002759 max=0.004897 Jy/beam ! Clean residual mean=0.000001 rms=0.000688 Jy/beam ! Combined flux in latest and established models = 0.0812806 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.0812806 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9449 mas, bmaj=1.491 mas, bpa=-3.011 degrees ! Estimated noise=0.138509 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0115152 Jy ! Component: 100 - total flux cleaned = 0.0197613 Jy ! Component: 150 - total flux cleaned = 0.026415 Jy ! Component: 200 - total flux cleaned = 0.0319226 Jy ! Total flux subtracted in 200 components = 0.0319226 Jy ! Clean residual min=-0.002012 max=0.003355 Jy/beam ! Clean residual mean=0.000007 rms=0.000694 Jy/beam ! Combined flux in latest and established models = 0.113203 Jy ! Adding 70 model components to the UV plane model. ! The established model now contains 82 components and 0.113203 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00463848 Jy ! Component: 100 - total flux cleaned = 0.00860409 Jy ! Component: 150 - total flux cleaned = 0.0120638 Jy ! Component: 200 - total flux cleaned = 0.0151247 Jy ! Total flux subtracted in 200 components = 0.0151247 Jy ! Clean residual min=-0.001446 max=0.002064 Jy/beam ! Clean residual mean=0.000005 rms=0.000460 Jy/beam ! Combined flux in latest and established models = 0.128328 Jy ! Adding 85 model components to the UV plane model. ! The established model now contains 140 components and 0.128328 Jy ! Inverting map ! Added new window around map position (11.2, -11). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0027422 Jy ! Component: 100 - total flux cleaned = 0.00517748 Jy ! Component: 150 - total flux cleaned = 0.00735349 Jy ! Component: 200 - total flux cleaned = 0.00930306 Jy ! Total flux subtracted in 200 components = 0.00930306 Jy ! Clean residual min=-0.001105 max=0.001369 Jy/beam ! Clean residual mean=0.000003 rms=0.000333 Jy/beam ! Combined flux in latest and established models = 0.137631 Jy ! Adding 75 model components to the UV plane model. ! The established model now contains 185 components and 0.137631 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.166 mas, bmaj=2.512 mas, bpa=0.652 degrees ! Estimated noise=0.175976 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00368242 Jy ! Component: 100 - total flux cleaned = 0.00651761 Jy ! Component: 150 - total flux cleaned = 0.00877518 Jy ! Component: 200 - total flux cleaned = 0.0106093 Jy ! Total flux subtracted in 200 components = 0.0106093 Jy ! Clean residual min=-0.001347 max=0.001507 Jy/beam ! Clean residual mean=0.000005 rms=0.000374 Jy/beam ! Combined flux in latest and established models = 0.14824 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00151201 Jy ! Component: 100 - total flux cleaned = 0.00276917 Jy ! Component: 150 - total flux cleaned = 0.00382092 Jy ! Component: 200 - total flux cleaned = 0.00470521 Jy ! Total flux subtracted in 200 components = 0.00470521 Jy ! Clean residual min=-0.001031 max=0.001181 Jy/beam ! Clean residual mean=0.000003 rms=0.000281 Jy/beam ! Combined flux in latest and established models = 0.152946 Jy ! Adding 168 model components to the UV plane model. ! The established model now contains 318 components and 0.152946 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9449 mas, bmaj=1.491 mas, bpa=-3.011 degrees ! Estimated noise=0.138509 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000725102 Jy ! Component: 100 - total flux cleaned = 0.0012522 Jy ! Component: 150 - total flux cleaned = 0.0016458 Jy ! Component: 200 - total flux cleaned = 0.00198312 Jy ! Total flux subtracted in 200 components = 0.00198312 Jy ! Clean residual min=-0.000769 max=0.000756 Jy/beam ! Clean residual mean=0.000001 rms=0.000184 Jy/beam ! Combined flux in latest and established models = 0.154929 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 346 components and 0.154929 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052514Jy sigma=1.219643 ! Fit after self-cal, rms=0.052506Jy sigma=1.219464 wmodel J0140+4658_X_map.mod ! Writing 346 model components to file: J0140+4658_X_map.mod wobs J0140+4658_X_uvs.fits ! Writing UV FITS file: J0140+4658_X_uvs.fits wwins J0140+4658_X_map.win ! wwins: Wrote 9 windows to J0140+4658_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -8.60996e-05 Jy ! Component: 100 - total flux cleaned = -0.000153264 Jy ! Component: 150 - total flux cleaned = -0.000165806 Jy ! Component: 200 - total flux cleaned = -0.000165599 Jy ! Component: 250 - total flux cleaned = -0.000165501 Jy ! Component: 300 - total flux cleaned = -0.000165391 Jy ! Component: 350 - total flux cleaned = -0.000153874 Jy ! Component: 400 - total flux cleaned = -0.000176417 Jy ! Component: 450 - total flux cleaned = -0.000154111 Jy ! Component: 500 - total flux cleaned = -0.000154198 Jy ! Component: 550 - total flux cleaned = -0.0001757 Jy ! Component: 600 - total flux cleaned = -0.00020729 Jy ! Component: 650 - total flux cleaned = -0.000259232 Jy ! Component: 700 - total flux cleaned = -0.000290006 Jy ! Component: 750 - total flux cleaned = -0.000309984 Jy ! Component: 800 - total flux cleaned = -0.000339867 Jy ! Component: 850 - total flux cleaned = -0.00030054 Jy ! Component: 900 - total flux cleaned = -0.000369031 Jy ! Component: 950 - total flux cleaned = -0.000340372 Jy ! Component: 1000 - total flux cleaned = -0.000388139 Jy ! Component: 1050 - total flux cleaned = -0.000425866 Jy ! Component: 1100 - total flux cleaned = -0.00042571 Jy ! Component: 1150 - total flux cleaned = -0.000407235 Jy ! Component: 1200 - total flux cleaned = -0.000434631 Jy ! Component: 1250 - total flux cleaned = -0.000452654 Jy ! Component: 1300 - total flux cleaned = -0.000461563 Jy ! Component: 1350 - total flux cleaned = -0.000479264 Jy ! Component: 1400 - total flux cleaned = -0.00048804 Jy ! Component: 1450 - total flux cleaned = -0.000514067 Jy ! Component: 1500 - total flux cleaned = -0.000540093 Jy ! Component: 1550 - total flux cleaned = -0.000591276 Jy ! Component: 1600 - total flux cleaned = -0.000565912 Jy ! Component: 1650 - total flux cleaned = -0.000607943 Jy ! Component: 1700 - total flux cleaned = -0.00064962 Jy ! Component: 1750 - total flux cleaned = -0.000674438 Jy ! Component: 1800 - total flux cleaned = -0.000707232 Jy ! Component: 1850 - total flux cleaned = -0.00075592 Jy ! Component: 1900 - total flux cleaned = -0.00078808 Jy ! Component: 1950 - total flux cleaned = -0.000804062 Jy ! Component: 2000 - total flux cleaned = -0.00085167 Jy ! Component: 2050 - total flux cleaned = -0.000875227 Jy ! Component: 2100 - total flux cleaned = -0.000906416 Jy ! Component: 2150 - total flux cleaned = -0.000906377 Jy ! Component: 2200 - total flux cleaned = -0.000921829 Jy ! Component: 2250 - total flux cleaned = -0.000944693 Jy ! Component: 2300 - total flux cleaned = -0.000944808 Jy ! Component: 2350 - total flux cleaned = -0.00099768 Jy ! Component: 2400 - total flux cleaned = -0.000990166 Jy ! Component: 2450 - total flux cleaned = -0.00101997 Jy ! Component: 2500 - total flux cleaned = -0.00104958 Jy ! Component: 2550 - total flux cleaned = -0.00106432 Jy ! Component: 2600 - total flux cleaned = -0.00107158 Jy ! Component: 2650 - total flux cleaned = -0.00107155 Jy ! Component: 2700 - total flux cleaned = -0.00110048 Jy ! Component: 2750 - total flux cleaned = -0.00107171 Jy ! Component: 2800 - total flux cleaned = -0.00110741 Jy ! Component: 2850 - total flux cleaned = -0.00112161 Jy ! Component: 2900 - total flux cleaned = -0.00112865 Jy ! Component: 2950 - total flux cleaned = -0.00115666 Jy ! Component: 3000 - total flux cleaned = -0.00120542 Jy ! Component: 3050 - total flux cleaned = -0.00116383 Jy ! Component: 3100 - total flux cleaned = -0.00119137 Jy ! Component: 3150 - total flux cleaned = -0.00117765 Jy ! Component: 3200 - total flux cleaned = -0.00118453 Jy ! Component: 3250 - total flux cleaned = -0.00124548 Jy ! Component: 3300 - total flux cleaned = -0.00127909 Jy ! Component: 3350 - total flux cleaned = -0.0012925 Jy ! Component: 3400 - total flux cleaned = -0.00128589 Jy ! Component: 3450 - total flux cleaned = -0.00131906 Jy ! Component: 3500 - total flux cleaned = -0.00135193 Jy ! Component: 3550 - total flux cleaned = -0.00136505 Jy ! Component: 3600 - total flux cleaned = -0.00141715 Jy ! Component: 3650 - total flux cleaned = -0.00142362 Jy ! Component: 3700 - total flux cleaned = -0.0013849 Jy ! Component: 3750 - total flux cleaned = -0.00141055 Jy ! Component: 3800 - total flux cleaned = -0.00142326 Jy ! Component: 3850 - total flux cleaned = -0.0014423 Jy ! Component: 3900 - total flux cleaned = -0.00148018 Jy ! Component: 3950 - total flux cleaned = -0.00143615 Jy ! Component: 4000 - total flux cleaned = -0.0014862 Jy ! Component: 4050 - total flux cleaned = -0.00149242 Jy ! Total flux subtracted in 4096 components = -0.00150483 Jy ! Clean residual min=-0.000364 max=0.000385 Jy/beam ! Clean residual mean=0.000000 rms=0.000107 Jy/beam ! Combined flux in latest and established models = 0.153424 Jy keep ! Adding 339 model components to the UV plane model. ! The established model now contains 685 components and 0.153424 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J0140+4658_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9449 x 1.491 at -3.011 degrees (North through East) ! Clean map min=-0.00059481 max=0.049645 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J0140+4658_X_map.fits wmodel /vlbi/uf001/uva//J0140+4658_X_map.mod ! Writing 685 model components to file: /vlbi/uf001/uva//J0140+4658_X_map.mod wobs /vlbi/uf001/uva//J0140+4658_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J0140+4658_X_uvs.fits wwins /vlbi/uf001/uva//J0140+4658_X_map.win ! wwins: Wrote 10 windows to /vlbi/uf001/uva//J0140+4658_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0496446 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000106497 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.643556 0.643556 1.28711 2.57422 5.14845 10.2969 20.5938 41.1876 82.3751 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.049 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 466.16 quit ! Quitting program ! Log file /vlbi/uf001/uva//J0140+4658_X_dfm.log closed on Sun Jan 13 21:04:27 2019