! Started logfile: /vlbi/uf001/uvm//J0134-093D_S_a_dfm.log on Sun Jan 13 20:30:25 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uvm//J0134-093D_S_a_uvm.fits
! Reading UV FITS file: /vlbi/uf001/uvm//J0134-093D_S_a_uvm.fits
! AN table 1: 132 integrations on 45 of 45 possible baselines.
! AN table 2: 111 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.899758 visibilities/baseline/integration-bin.
! Found source: J0134-093D
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 26820 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0134-093D_S_a]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 44 telescope corrections were flagged in sub-array 1.
!  A total of 99 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 44 telescope corrections were flagged in sub-array 1.
!  A total of 99 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 44 telescope corrections were flagged in sub-array 1.
!  A total of 99 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.004157Jy  sigma=18.166308
! Fit after  self-cal, rms=0.923249Jy  sigma=16.711047
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.479 mas, bmaj=6.428 mas, bpa=-5.871 degrees
! Estimated noise=0.441044 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0564245 Jy
! Component: 100  -  total flux cleaned = 0.0817038 Jy
! Total flux subtracted in 100 components = 0.0817038 Jy
! Clean residual min=-0.010808 max=0.019207 Jy/beam
! Clean residual mean=-0.000053 rms=0.003160 Jy/beam
! Combined flux in latest and established models = 0.0817038 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 36 components and 0.0817038 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.133172Jy  sigma=2.373417
! Fit after  self-cal, rms=0.132168Jy  sigma=2.355172
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.06 mas, bmaj=7.454 mas, bpa=-3.319 degrees
! Estimated noise=0.244369 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0306396 Jy
! Component: 100  -  total flux cleaned = 0.0490998 Jy
! Component: 150  -  total flux cleaned = 0.0606487 Jy
! Component: 200  -  total flux cleaned = 0.0679009 Jy
! Total flux subtracted in 200 components = 0.0679009 Jy
! Clean residual min=-0.013724 max=0.020968 Jy/beam
! Clean residual mean=-0.000012 rms=0.004582 Jy/beam
! Combined flux in latest and established models = 0.149605 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 62 components and 0.149605 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.125019Jy  sigma=2.208725
! Fit after  self-cal, rms=0.124668Jy  sigma=2.199341
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.06 x 7.454 at -3.319 degrees (North through East)
! Clean map  min=-0.01392  max=0.073686 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.46     FD        0.67     HN        1.96     KP        1.14     
!   LA        0.90     MK        1.08     NL        2.54     OV        1.09     
!   PT        0.63     SC        1.91     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.20     HN        1.27     KP        0.80     LA        1.02     
!   MK        0.81     NL        1.68     OV        0.67     PT        1.04     
!   SC        1.23     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.74     FD        0.82     HN        1.87     KP        1.51     
!   LA        0.72     MK        0.91     NL        2.16     OV        1.18     
!   PT        0.57     SC        1.69     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.46     HN        1.40     KP        1.10     LA        0.88     
!   MK        0.92     NL        1.72     OV        0.79     PT        0.74     
!   SC        1.26     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.29     FD        0.61     HN        1.27     KP        1.61     
!   LA        0.75     MK        0.84     NL        2.04     OV        1.02     
!   PT        0.65     SC        1.48     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.23     HN        0.97     KP        0.86     LA        1.34     
!   MK        0.91     NL        1.29     OV        0.93     PT        0.78     
!   SC        0.99     
! 
! 
! Fit before self-cal, rms=0.124668Jy  sigma=2.199341
! Fit after  self-cal, rms=0.175468Jy  sigma=2.022229
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.144 mas, bmaj=8.129 mas, bpa=-6.393 degrees
! Estimated noise=0.260461 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00190215 Jy
! Component: 100  -  total flux cleaned = 0.00178883 Jy
! Component: 150  -  total flux cleaned = 0.00178457 Jy
! Component: 200  -  total flux cleaned = 0.0017118 Jy
! Total flux subtracted in 200 components = 0.0017118 Jy
! Clean residual min=-0.014253 max=0.013377 Jy/beam
! Clean residual mean=-0.000014 rms=0.003827 Jy/beam
! Combined flux in latest and established models = 0.151317 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 71 components and 0.151317 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.175051Jy  sigma=2.022486
! Fit after  self-cal, rms=0.179452Jy  sigma=1.993446
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.179452Jy  sigma=1.993446
! Fit after  self-cal, rms=0.281310Jy  sigma=1.889167
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.189 mas, bmaj=8.519 mas, bpa=-7.629 degrees
! Estimated noise=0.291681 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00774633 Jy
! Component: 100  -  total flux cleaned = 0.00971241 Jy
! Component: 150  -  total flux cleaned = 0.00970775 Jy
! Component: 200  -  total flux cleaned = 0.00970106 Jy
! Total flux subtracted in 200 components = 0.00970106 Jy
! Clean residual min=-0.014818 max=0.014410 Jy/beam
! Clean residual mean=0.000002 rms=0.003483 Jy/beam
! Combined flux in latest and established models = 0.161018 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 73 components and 0.161018 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.280567Jy  sigma=1.884670
! Fit after  self-cal, rms=0.282399Jy  sigma=1.878428
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000916611 Jy
! Component: 100  -  total flux cleaned = -0.000914688 Jy
! Component: 150  -  total flux cleaned = -0.00091381 Jy
! Component: 200  -  total flux cleaned = -0.000959049 Jy
! Total flux subtracted in 200 components = -0.000959049 Jy
! Clean residual min=-0.014368 max=0.013584 Jy/beam
! Clean residual mean=0.000001 rms=0.003477 Jy/beam
! Combined flux in latest and established models = 0.160059 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 76 components and 0.160059 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.282305Jy  sigma=1.878459
! Fit after  self-cal, rms=0.282285Jy  sigma=1.878408
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.282285Jy  sigma=1.878408
! Fit after  self-cal, rms=0.339943Jy  sigma=1.865229
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.157 mas, bmaj=8.82 mas, bpa=-9.051 degrees
! Estimated noise=0.292376 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000903623 Jy
! Component: 100  -  total flux cleaned = 0.000904309 Jy
! Component: 150  -  total flux cleaned = 0.000904207 Jy
! Component: 200  -  total flux cleaned = 0.000905751 Jy
! Total flux subtracted in 200 components = 0.000905751 Jy
! Clean residual min=-0.013550 max=0.013538 Jy/beam
! Clean residual mean=0.000002 rms=0.003298 Jy/beam
! Combined flux in latest and established models = 0.160964 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 76 components and 0.160964 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.339673Jy  sigma=1.865098
! Fit after  self-cal, rms=0.340091Jy  sigma=1.864129
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000412104 Jy
! Component: 100  -  total flux cleaned = -0.000532857 Jy
! Component: 150  -  total flux cleaned = -0.000581605 Jy
! Component: 200  -  total flux cleaned = -0.000629659 Jy
! Total flux subtracted in 200 components = -0.000629659 Jy
! Clean residual min=-0.013369 max=0.013469 Jy/beam
! Clean residual mean=0.000001 rms=0.003305 Jy/beam
! Combined flux in latest and established models = 0.160335 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 77 components and 0.160335 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.339985Jy  sigma=1.864270
! Fit after  self-cal, rms=0.339959Jy  sigma=1.864234
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.339959Jy  sigma=1.864234
! Fit after  self-cal, rms=0.361047Jy  sigma=1.863008
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.186 mas, bmaj=15.82 mas, bpa=-6.395 degrees
! Estimated noise=0.349776 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00419837 Jy
! Component: 100  -  total flux cleaned = 0.00438958 Jy
! Component: 150  -  total flux cleaned = 0.00437512 Jy
! Component: 200  -  total flux cleaned = 0.00436392 Jy
! Total flux subtracted in 200 components = 0.00436392 Jy
! Clean residual min=-0.022463 max=0.019334 Jy/beam
! Clean residual mean=0.000009 rms=0.005748 Jy/beam
! Combined flux in latest and established models = 0.164699 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 82 components and 0.164699 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.360832Jy  sigma=1.866080
! Fit after  self-cal, rms=0.360846Jy  sigma=1.865502
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.06844e-05 Jy
! Component: 100  -  total flux cleaned = -7.35499e-05 Jy
! Component: 150  -  total flux cleaned = -7.26005e-05 Jy
! Component: 200  -  total flux cleaned = -6.88658e-05 Jy
! Total flux subtracted in 200 components = -6.88658e-05 Jy
! Clean residual min=-0.022363 max=0.019428 Jy/beam
! Clean residual mean=0.000008 rms=0.005752 Jy/beam
! Combined flux in latest and established models = 0.16463 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 82 components and 0.16463 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.360765Jy  sigma=1.870173
! Fit after  self-cal, rms=0.360722Jy  sigma=1.869665
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.103 mas, bmaj=9.111 mas, bpa=-10.36 degrees
! Estimated noise=0.289248 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.103 x 9.111 at -10.36 degrees (North through East)
! Clean map  min=-0.012818  max=0.08839 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.513 mas, bmaj=7.819 mas, bpa=-11.42 degrees
! Estimated noise=0.522366 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0669515 Jy
! Component: 100  -  total flux cleaned = 0.101028 Jy
! Component: 150  -  total flux cleaned = 0.120542 Jy
! Component: 200  -  total flux cleaned = 0.132449 Jy
! Total flux subtracted in 200 components = 0.132449 Jy
! Clean residual min=-0.008735 max=0.011966 Jy/beam
! Clean residual mean=-0.000015 rms=0.002475 Jy/beam
! Combined flux in latest and established models = 0.132449 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 0.132449 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.103 mas, bmaj=9.111 mas, bpa=-10.36 degrees
! Estimated noise=0.289248 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.5, -11).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0164241 Jy
! Component: 100  -  total flux cleaned = 0.0256442 Jy
! Component: 150  -  total flux cleaned = 0.0308971 Jy
! Component: 200  -  total flux cleaned = 0.0322874 Jy
! Total flux subtracted in 200 components = 0.0322874 Jy
! Clean residual min=-0.013337 max=0.012925 Jy/beam
! Clean residual mean=0.000001 rms=0.003174 Jy/beam
! Combined flux in latest and established models = 0.164737 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 51 components and 0.164737 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.186 mas, bmaj=15.82 mas, bpa=-6.395 degrees
! Estimated noise=0.349776 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00100023 Jy
! Component: 100  -  total flux cleaned = 0.00167683 Jy
! Component: 150  -  total flux cleaned = 0.00219107 Jy
! Component: 200  -  total flux cleaned = 0.00271879 Jy
! Total flux subtracted in 200 components = 0.00271879 Jy
! Clean residual min=-0.022855 max=0.020260 Jy/beam
! Clean residual mean=0.000008 rms=0.005639 Jy/beam
! Combined flux in latest and established models = 0.167455 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00027147 Jy
! Component: 100  -  total flux cleaned = 0.000436524 Jy
! Component: 150  -  total flux cleaned = 0.000512355 Jy
! Component: 200  -  total flux cleaned = 0.000442352 Jy
! Total flux subtracted in 200 components = 0.000442352 Jy
! Clean residual min=-0.022791 max=0.020227 Jy/beam
! Clean residual mean=0.000009 rms=0.005640 Jy/beam
! Combined flux in latest and established models = 0.167898 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 74 components and 0.167898 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.103 mas, bmaj=9.111 mas, bpa=-10.36 degrees
! Estimated noise=0.289248 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000820853 Jy
! Component: 100  -  total flux cleaned = 0.000565955 Jy
! Component: 150  -  total flux cleaned = 0.000348329 Jy
! Component: 200  -  total flux cleaned = 7.27695e-05 Jy
! Total flux subtracted in 200 components = 7.27695e-05 Jy
! Clean residual min=-0.013008 max=0.012781 Jy/beam
! Clean residual mean=0.000004 rms=0.003162 Jy/beam
! Combined flux in latest and established models = 0.167971 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 87 components and 0.167971 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.359057Jy  sigma=1.862327
! Fit after  self-cal, rms=0.358158Jy  sigma=1.856662
wmodel J0134-093D_S_a_map.mod
! Writing 87 model components to file: J0134-093D_S_a_map.mod
wobs   J0134-093D_S_a_uvs.fits
! Writing UV FITS file: J0134-093D_S_a_uvs.fits
wwins  J0134-093D_S_a_map.win
! wwins: Wrote 2 windows to J0134-093D_S_a_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00130442 Jy
! Component: 100  -  total flux cleaned = 0.00343718 Jy
! Component: 150  -  total flux cleaned = 0.00563591 Jy
! Component: 200  -  total flux cleaned = 0.00772891 Jy
! Component: 250  -  total flux cleaned = 0.00973954 Jy
! Component: 300  -  total flux cleaned = 0.0113291 Jy
! Component: 350  -  total flux cleaned = 0.0130407 Jy
! Component: 400  -  total flux cleaned = 0.0142025 Jy
! Component: 450  -  total flux cleaned = 0.0154907 Jy
! Component: 500  -  total flux cleaned = 0.0165857 Jy
! Component: 550  -  total flux cleaned = 0.0175007 Jy
! Component: 600  -  total flux cleaned = 0.0185438 Jy
! Component: 650  -  total flux cleaned = 0.0195626 Jy
! Component: 700  -  total flux cleaned = 0.0205625 Jy
! Component: 750  -  total flux cleaned = 0.0218247 Jy
! Component: 800  -  total flux cleaned = 0.022923 Jy
! Component: 850  -  total flux cleaned = 0.0240026 Jy
! Component: 900  -  total flux cleaned = 0.0249307 Jy
! Component: 950  -  total flux cleaned = 0.0254536 Jy
! Component: 1000  -  total flux cleaned = 0.0258405 Jy
! Component: 1050  -  total flux cleaned = 0.0266029 Jy
! Component: 1100  -  total flux cleaned = 0.0274794 Jy
! Component: 1150  -  total flux cleaned = 0.0280951 Jy
! Component: 1200  -  total flux cleaned = 0.0285823 Jy
! Component: 1250  -  total flux cleaned = 0.0294222 Jy
! Component: 1300  -  total flux cleaned = 0.0301312 Jy
! Component: 1350  -  total flux cleaned = 0.0309482 Jy
! Component: 1400  -  total flux cleaned = 0.0316406 Jy
! Component: 1450  -  total flux cleaned = 0.0325524 Jy
! Component: 1500  -  total flux cleaned = 0.033229 Jy
! Component: 1550  -  total flux cleaned = 0.0343447 Jy
! Component: 1600  -  total flux cleaned = 0.0348963 Jy
! Component: 1650  -  total flux cleaned = 0.0358788 Jy
! Component: 1700  -  total flux cleaned = 0.0365271 Jy
! Component: 1750  -  total flux cleaned = 0.0372761 Jy
! Component: 1800  -  total flux cleaned = 0.0380179 Jy
! Component: 1850  -  total flux cleaned = 0.0386476 Jy
! Component: 1900  -  total flux cleaned = 0.0395833 Jy
! Component: 1950  -  total flux cleaned = 0.0405112 Jy
! Component: 2000  -  total flux cleaned = 0.0414299 Jy
! Component: 2050  -  total flux cleaned = 0.0420365 Jy
! Component: 2100  -  total flux cleaned = 0.04274 Jy
! Component: 2150  -  total flux cleaned = 0.0435369 Jy
! Component: 2200  -  total flux cleaned = 0.0444262 Jy
! Component: 2250  -  total flux cleaned = 0.0450134 Jy
! Component: 2300  -  total flux cleaned = 0.0457899 Jy
! Component: 2350  -  total flux cleaned = 0.0465613 Jy
! Component: 2400  -  total flux cleaned = 0.0469443 Jy
! Component: 2450  -  total flux cleaned = 0.0477975 Jy
! Component: 2500  -  total flux cleaned = 0.0482685 Jy
! Component: 2550  -  total flux cleaned = 0.0488292 Jy
! Component: 2600  -  total flux cleaned = 0.0492923 Jy
! Component: 2650  -  total flux cleaned = 0.0497526 Jy
! Component: 2700  -  total flux cleaned = 0.050211 Jy
! Component: 2750  -  total flux cleaned = 0.0509378 Jy
! Component: 2800  -  total flux cleaned = 0.0514793 Jy
! Component: 2850  -  total flux cleaned = 0.0515683 Jy
! Component: 2900  -  total flux cleaned = 0.0521035 Jy
! Component: 2950  -  total flux cleaned = 0.0522822 Jy
! Component: 3000  -  total flux cleaned = 0.0528109 Jy
! Component: 3050  -  total flux cleaned = 0.0535096 Jy
! Component: 3100  -  total flux cleaned = 0.0536818 Jy
! Component: 3150  -  total flux cleaned = 0.0541997 Jy
! Component: 3200  -  total flux cleaned = 0.0546291 Jy
! Component: 3250  -  total flux cleaned = 0.0548006 Jy
! Component: 3300  -  total flux cleaned = 0.0548857 Jy
! Component: 3350  -  total flux cleaned = 0.0551388 Jy
! Component: 3400  -  total flux cleaned = 0.0556417 Jy
! Component: 3450  -  total flux cleaned = 0.0558922 Jy
! Component: 3500  -  total flux cleaned = 0.0560577 Jy
! Component: 3550  -  total flux cleaned = 0.0563056 Jy
! Component: 3600  -  total flux cleaned = 0.0567971 Jy
! Component: 3650  -  total flux cleaned = 0.0569604 Jy
! Component: 3700  -  total flux cleaned = 0.0572039 Jy
! Component: 3750  -  total flux cleaned = 0.0573651 Jy
! Component: 3800  -  total flux cleaned = 0.0578445 Jy
! Component: 3850  -  total flux cleaned = 0.0581633 Jy
! Component: 3900  -  total flux cleaned = 0.0583216 Jy
! Component: 3950  -  total flux cleaned = 0.0584012 Jy
! Component: 4000  -  total flux cleaned = 0.0586366 Jy
! Component: 4050  -  total flux cleaned = 0.0588703 Jy
! Total flux subtracted in 4096 components = 0.0590254 Jy
! Clean residual min=-0.004296 max=0.004196 Jy/beam
! Clean residual mean=0.000004 rms=0.001621 Jy/beam
! Combined flux in latest and established models = 0.226996 Jy
keep
! Adding 424 model components to the UV plane model.
! The established model now contains 511 components and 0.226996 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uvm//J0134-093D_S_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.103 x 9.111 at -10.36 degrees (North through East)
! Clean map  min=-0.0097156  max=0.091006 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uvm//J0134-093D_S_a_map.fits
wmodel /vlbi/uf001/uvm//J0134-093D_S_a_map.mod
! Writing 511 model components to file: /vlbi/uf001/uvm//J0134-093D_S_a_map.mod
wobs   /vlbi/uf001/uvm//J0134-093D_S_a_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uvm//J0134-093D_S_a_uvs.fits
wwins  /vlbi/uf001/uvm//J0134-093D_S_a_map.win
! wwins: Wrote 3 windows to /vlbi/uf001/uvm//J0134-093D_S_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0910065 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00160365 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -5.28638 5.28638 10.5728 21.1455 42.291 84.5821
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0048 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.091 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  56.749 
quit
! Quitting program
! Log file /vlbi/uf001/uvm//J0134-093D_S_a_dfm.log closed on Sun Jan 13 20:30:30 2019