! Started logfile: /vlbi/uf001/uva//J0134+0003_X_dfm.log on Sun Jan 13 21:02:08 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J0134+0003_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J0134+0003_X_uva.fits ! AN table 1: 19 integrations on 28 of 28 possible baselines. ! AN table 2: 57 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.692669 visibilities/baseline/integration-bin. ! Found source: J0134+0003 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 17688 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0134+0003_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 192 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 192 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 192 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 192 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 192 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 192 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 192 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 192 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 192 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 192 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 192 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 192 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.004657Jy sigma=20.873301 ! Fit after self-cal, rms=0.938182Jy sigma=19.491909 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6156 mas, bmaj=1.591 mas, bpa=-6.189 degrees ! Estimated noise=0.401227 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.043676 Jy ! Component: 100 - total flux cleaned = 0.0595527 Jy ! Total flux subtracted in 100 components = 0.0595527 Jy ! Clean residual min=-0.007026 max=0.014212 Jy/beam ! Clean residual mean=-0.000003 rms=0.001687 Jy/beam ! Combined flux in latest and established models = 0.0595527 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.0595527 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084443Jy sigma=1.627776 ! Fit after self-cal, rms=0.083812Jy sigma=1.614811 ! Inverting map ! Added new window around map position (-6, 2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0144222 Jy ! Component: 100 - total flux cleaned = 0.0238919 Jy ! Total flux subtracted in 100 components = 0.0238919 Jy ! Clean residual min=-0.005793 max=0.006963 Jy/beam ! Clean residual mean=-0.000003 rms=0.001314 Jy/beam ! Combined flux in latest and established models = 0.0834446 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 26 components and 0.0834446 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080314Jy sigma=1.516616 ! Fit after self-cal, rms=0.079844Jy sigma=1.509092 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00909341 Jy ! Component: 100 - total flux cleaned = 0.0151897 Jy ! Total flux subtracted in 100 components = 0.0151897 Jy ! Clean residual min=-0.005510 max=0.006773 Jy/beam ! Clean residual mean=-0.000003 rms=0.001170 Jy/beam ! Combined flux in latest and established models = 0.0986343 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 28 components and 0.0986343 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078274Jy sigma=1.462916 ! Fit after self-cal, rms=0.078084Jy sigma=1.460679 ! Inverting map ! Added new window around map position (1.6, 0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0073599 Jy ! Component: 100 - total flux cleaned = 0.0123703 Jy ! Total flux subtracted in 100 components = 0.0123703 Jy ! Clean residual min=-0.004758 max=0.004292 Jy/beam ! Clean residual mean=-0.000003 rms=0.001071 Jy/beam ! Combined flux in latest and established models = 0.111005 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 40 components and 0.111005 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076890Jy sigma=1.429175 ! Fit after self-cal, rms=0.076745Jy sigma=1.426399 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.758 mas, bmaj=1.774 mas, bpa=-4.081 degrees ! Estimated noise=0.271939 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00985261 Jy ! Component: 100 - total flux cleaned = 0.0168243 Jy ! Component: 150 - total flux cleaned = 0.0223659 Jy ! Component: 200 - total flux cleaned = 0.0269335 Jy ! Total flux subtracted in 200 components = 0.0269335 Jy ! Clean residual min=-0.006316 max=0.006641 Jy/beam ! Clean residual mean=-0.000009 rms=0.001540 Jy/beam ! Combined flux in latest and established models = 0.137938 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 69 components and 0.137938 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075203Jy sigma=1.382144 ! Fit after self-cal, rms=0.075099Jy sigma=1.378724 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.758 x 1.774 at -4.081 degrees (North through East) ! Clean map min=-0.0063059 max=0.064282 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.24 FD 0.98 HN 0.89 LA 0.83 ! MK 1.04 NL 1.04 PT 1.05 SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.89 HN 1.04 LA 0.78 MK 1.21 ! NL 1.24 OV 0.97 PT 0.87 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 0.95 HN 0.91 LA 0.77 ! MK 0.99 NL 1.06 PT 1.12 SC 1.06 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.92 HN 1.14 LA 0.82 MK 1.09 ! NL 1.22 OV 0.92 PT 0.85 SC 0.94 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.26 FD 0.95 HN 1.04 LA 0.89 ! MK 0.93 NL 1.01 PT 1.05 SC 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 HN 1.02 LA 0.76 MK 1.24 ! NL 1.21 OV 0.99 PT 0.86 SC 1.06 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.98 HN 1.04 LA 0.91 ! MK 1.02 NL 0.99 PT 1.03 SC 1.06 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.92 HN 0.95 LA 0.77 MK 1.18 ! NL 1.23 OV 0.98 PT 0.88 SC 1.13 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 0.89 HN 1.04 LA 0.91 ! MK 1.07 NL 1.05 PT 1.14 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 HN 1.23 LA 0.75 MK 1.14 ! NL 1.24 OV 1.03 PT 0.86 SC 0.92 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 1.02 HN 1.04 LA 0.86 ! MK 0.92 NL 1.04 PT 1.06 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 HN 1.18 LA 0.77 MK 1.21 ! NL 1.22 OV 0.98 PT 0.85 SC 0.90 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.00 HN 1.06 LA 0.83 ! MK 1.11 NL 1.04 PT 1.02 SC 0.90 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 HN 1.04 LA 0.81 MK 1.14 ! NL 1.25 OV 1.10 PT 0.81 SC 0.93 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.09 HN 1.05 LA 0.81 ! MK 0.86 NL 1.03 PT 1.14 SC 0.91 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 HN 1.09 LA 0.78 MK 1.16 ! NL 1.19 OV 1.04 PT 0.86 SC 0.91 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 0.91 HN 1.03 LA 0.92 ! MK 0.96 NL 1.02 PT 1.07 SC 0.88 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 HN 1.13 LA 0.74 MK 1.20 ! NL 1.23 OV 0.98 PT 0.90 SC 1.11 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.25 FD 0.98 HN 1.05 LA 0.91 ! MK 0.95 NL 0.99 PT 0.99 SC 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.07 HN 1.21 LA 0.74 MK 1.15 ! NL 1.19 OV 0.96 PT 0.92 SC 0.85 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 0.97 HN 1.07 LA 0.82 ! MK 0.91 NL 1.03 PT 1.09 SC 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.10 HN 0.95 LA 0.70 MK 1.13 ! NL 1.30 OV 1.10 PT 0.87 SC 1.00 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.92 HN 1.00 LA 0.73 ! MK 1.03 NL 1.10 PT 1.07 SC 0.83 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 HN 0.95 LA 0.77 MK 1.21 ! NL 1.22 OV 1.02 PT 0.89 SC 0.84 ! ! ! Fit before self-cal, rms=0.075099Jy sigma=1.378724 ! Fit after self-cal, rms=0.074303Jy sigma=1.331969 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7733 mas, bmaj=1.798 mas, bpa=-2.577 degrees ! Estimated noise=0.264309 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5, -11.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00359 Jy ! Component: 100 - total flux cleaned = 0.00469114 Jy ! Component: 150 - total flux cleaned = 0.00548699 Jy ! Component: 200 - total flux cleaned = 0.00596345 Jy ! Total flux subtracted in 200 components = 0.00596345 Jy ! Clean residual min=-0.003229 max=0.003135 Jy/beam ! Clean residual mean=0.000001 rms=0.000739 Jy/beam ! Combined flux in latest and established models = 0.143902 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 89 components and 0.143902 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074045Jy sigma=1.325718 ! Fit after self-cal, rms=0.074518Jy sigma=1.322675 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074518Jy sigma=1.322675 ! Fit after self-cal, rms=0.074946Jy sigma=1.314348 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.772 mas, bmaj=1.783 mas, bpa=-1.862 degrees ! Estimated noise=0.261649 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000637622 Jy ! Component: 100 - total flux cleaned = 0.000819802 Jy ! Component: 150 - total flux cleaned = 0.000975172 Jy ! Component: 200 - total flux cleaned = 0.00107422 Jy ! Total flux subtracted in 200 components = 0.00107422 Jy ! Clean residual min=-0.002740 max=0.002840 Jy/beam ! Clean residual mean=-0.000000 rms=0.000601 Jy/beam ! Combined flux in latest and established models = 0.144976 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 99 components and 0.144976 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074885Jy sigma=1.313394 ! Fit after self-cal, rms=0.075049Jy sigma=1.312580 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-19, -2.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00261989 Jy ! Component: 100 - total flux cleaned = 0.004077 Jy ! Component: 150 - total flux cleaned = 0.00493522 Jy ! Component: 200 - total flux cleaned = 0.00567863 Jy ! Total flux subtracted in 200 components = 0.00567863 Jy ! Clean residual min=-0.002456 max=0.002527 Jy/beam ! Clean residual mean=0.000000 rms=0.000539 Jy/beam ! Combined flux in latest and established models = 0.150654 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 124 components and 0.150654 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074930Jy sigma=1.309862 ! Fit after self-cal, rms=0.074932Jy sigma=1.309417 ! Inverting map ! Added new window around map position (1.2, -15.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00169031 Jy ! Component: 100 - total flux cleaned = 0.00215215 Jy ! Component: 150 - total flux cleaned = 0.00285409 Jy ! Component: 200 - total flux cleaned = 0.00354041 Jy ! Total flux subtracted in 200 components = 0.00354041 Jy ! Clean residual min=-0.002311 max=0.002246 Jy/beam ! Clean residual mean=0.000000 rms=0.000492 Jy/beam ! Combined flux in latest and established models = 0.154195 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 141 components and 0.154195 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074793Jy sigma=1.306827 ! Fit after self-cal, rms=0.074824Jy sigma=1.306416 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074824Jy sigma=1.306416 ! Fit after self-cal, rms=0.074563Jy sigma=1.305932 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7749 mas, bmaj=1.782 mas, bpa=-1.482 degrees ! Estimated noise=0.260079 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000740029 Jy ! Component: 100 - total flux cleaned = 0.00120612 Jy ! Component: 150 - total flux cleaned = 0.00152147 Jy ! Component: 200 - total flux cleaned = 0.00187676 Jy ! Total flux subtracted in 200 components = 0.00187676 Jy ! Clean residual min=-0.002117 max=0.002165 Jy/beam ! Clean residual mean=-0.000000 rms=0.000458 Jy/beam ! Combined flux in latest and established models = 0.156072 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 150 components and 0.156072 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074502Jy sigma=1.304915 ! Fit after self-cal, rms=0.074542Jy sigma=1.304780 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000500861 Jy ! Component: 100 - total flux cleaned = 0.000670004 Jy ! Component: 150 - total flux cleaned = 0.000733716 Jy ! Component: 200 - total flux cleaned = 0.000793448 Jy ! Total flux subtracted in 200 components = 0.000793448 Jy ! Clean residual min=-0.002018 max=0.002115 Jy/beam ! Clean residual mean=-0.000000 rms=0.000449 Jy/beam ! Combined flux in latest and established models = 0.156865 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 158 components and 0.156865 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074509Jy sigma=1.304249 ! Fit after self-cal, rms=0.074517Jy sigma=1.304214 ! Inverting map ! Added new window around map position (0.4, 51). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00168505 Jy ! Component: 100 - total flux cleaned = 0.0023288 Jy ! Component: 150 - total flux cleaned = 0.00255501 Jy ! Component: 200 - total flux cleaned = 0.00270596 Jy ! Total flux subtracted in 200 components = 0.00270596 Jy ! Clean residual min=-0.001856 max=0.001979 Jy/beam ! Clean residual mean=-0.000000 rms=0.000426 Jy/beam ! Combined flux in latest and established models = 0.159571 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 180 components and 0.159571 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074454Jy sigma=1.303327 ! Fit after self-cal, rms=0.074436Jy sigma=1.303155 ! Inverting map ! Added new window around map position (-0.4, -21). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00132376 Jy ! Component: 100 - total flux cleaned = 0.00189834 Jy ! Component: 150 - total flux cleaned = 0.00232036 Jy ! Component: 200 - total flux cleaned = 0.00255685 Jy ! Total flux subtracted in 200 components = 0.00255685 Jy ! Clean residual min=-0.001725 max=0.001745 Jy/beam ! Clean residual mean=-0.000000 rms=0.000399 Jy/beam ! Combined flux in latest and established models = 0.162128 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 200 components and 0.162128 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074357Jy sigma=1.302071 ! Fit after self-cal, rms=0.074375Jy sigma=1.301887 ! Inverting map ! Added new window around map position (13.2, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00153023 Jy ! Component: 100 - total flux cleaned = 0.00214538 Jy ! Component: 150 - total flux cleaned = 0.0025806 Jy ! Component: 200 - total flux cleaned = 0.0028265 Jy ! Total flux subtracted in 200 components = 0.0028265 Jy ! Clean residual min=-0.001564 max=0.001472 Jy/beam ! Clean residual mean=-0.000000 rms=0.000375 Jy/beam ! Combined flux in latest and established models = 0.164954 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 213 components and 0.164954 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074318Jy sigma=1.301006 ! Fit after self-cal, rms=0.074299Jy sigma=1.300876 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074299Jy sigma=1.300876 ! Fit after self-cal, rms=0.073485Jy sigma=1.300523 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.975 mas, bmaj=3.152 mas, bpa=6.609 degrees ! Estimated noise=0.343023 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0011036 Jy ! Component: 100 - total flux cleaned = 0.00164395 Jy ! Component: 150 - total flux cleaned = 0.00194085 Jy ! Component: 200 - total flux cleaned = 0.00226585 Jy ! Total flux subtracted in 200 components = 0.00226585 Jy ! Clean residual min=-0.002139 max=0.001780 Jy/beam ! Clean residual mean=-0.000000 rms=0.000479 Jy/beam ! Combined flux in latest and established models = 0.16722 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 228 components and 0.16722 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073462Jy sigma=1.300287 ! Fit after self-cal, rms=0.073438Jy sigma=1.300155 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000163251 Jy ! Component: 100 - total flux cleaned = 0.000419302 Jy ! Component: 150 - total flux cleaned = 0.000522789 Jy ! Component: 200 - total flux cleaned = 0.000571127 Jy ! Total flux subtracted in 200 components = 0.000571127 Jy ! Clean residual min=-0.002109 max=0.001792 Jy/beam ! Clean residual mean=-0.000000 rms=0.000466 Jy/beam ! Combined flux in latest and established models = 0.167791 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 236 components and 0.167791 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073430Jy sigma=1.300109 ! Fit after self-cal, rms=0.073425Jy sigma=1.300052 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.7773 mas, bmaj=1.78 mas, bpa=-1.181 degrees ! Estimated noise=0.258237 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7773 x 1.78 at -1.181 degrees (North through East) ! Clean map min=-0.0032483 max=0.060907 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6281 mas, bmaj=1.575 mas, bpa=-3.575 degrees ! Estimated noise=0.393428 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0425371 Jy ! Component: 100 - total flux cleaned = 0.0647908 Jy ! Component: 150 - total flux cleaned = 0.0795594 Jy ! Component: 200 - total flux cleaned = 0.090184 Jy ! Total flux subtracted in 200 components = 0.090184 Jy ! Clean residual min=-0.004544 max=0.007042 Jy/beam ! Clean residual mean=-0.000001 rms=0.001193 Jy/beam ! Combined flux in latest and established models = 0.090184 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.090184 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7773 mas, bmaj=1.78 mas, bpa=-1.181 degrees ! Estimated noise=0.258237 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.8, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.013377 Jy ! Component: 100 - total flux cleaned = 0.0220071 Jy ! Component: 150 - total flux cleaned = 0.0284588 Jy ! Component: 200 - total flux cleaned = 0.0336239 Jy ! Total flux subtracted in 200 components = 0.0336239 Jy ! Clean residual min=-0.003741 max=0.004164 Jy/beam ! Clean residual mean=-0.000003 rms=0.000925 Jy/beam ! Combined flux in latest and established models = 0.123808 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 62 components and 0.123808 Jy ! Inverting map ! Added new window around map position (-0.8, 0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0046564 Jy ! Component: 100 - total flux cleaned = 0.00849218 Jy ! Component: 150 - total flux cleaned = 0.0114461 Jy ! Component: 200 - total flux cleaned = 0.0141858 Jy ! Total flux subtracted in 200 components = 0.0141858 Jy ! Clean residual min=-0.003055 max=0.002762 Jy/beam ! Clean residual mean=-0.000002 rms=0.000659 Jy/beam ! Combined flux in latest and established models = 0.137994 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 93 components and 0.137994 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.975 mas, bmaj=3.152 mas, bpa=6.609 degrees ! Estimated noise=0.343023 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00516809 Jy ! Component: 100 - total flux cleaned = 0.00890806 Jy ! Component: 150 - total flux cleaned = 0.0119781 Jy ! Component: 200 - total flux cleaned = 0.0144798 Jy ! Total flux subtracted in 200 components = 0.0144798 Jy ! Clean residual min=-0.003305 max=0.002725 Jy/beam ! Clean residual mean=-0.000002 rms=0.000784 Jy/beam ! Combined flux in latest and established models = 0.152474 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0017928 Jy ! Component: 100 - total flux cleaned = 0.00345307 Jy ! Component: 150 - total flux cleaned = 0.00493954 Jy ! Component: 200 - total flux cleaned = 0.00633766 Jy ! Total flux subtracted in 200 components = 0.00633766 Jy ! Clean residual min=-0.002446 max=0.002194 Jy/beam ! Clean residual mean=-0.000002 rms=0.000620 Jy/beam ! Combined flux in latest and established models = 0.158811 Jy ! Adding 83 model components to the UV plane model. ! The established model now contains 153 components and 0.158811 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7773 mas, bmaj=1.78 mas, bpa=-1.181 degrees ! Estimated noise=0.258237 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00150566 Jy ! Component: 100 - total flux cleaned = 0.0026572 Jy ! Component: 150 - total flux cleaned = 0.00361116 Jy ! Component: 200 - total flux cleaned = 0.00442237 Jy ! Total flux subtracted in 200 components = 0.00442237 Jy ! Clean residual min=-0.001952 max=0.001673 Jy/beam ! Clean residual mean=-0.000000 rms=0.000399 Jy/beam ! Combined flux in latest and established models = 0.163234 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 183 components and 0.163234 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073489Jy sigma=1.302095 ! Fit after self-cal, rms=0.073428Jy sigma=1.301127 wmodel J0134+0003_X_map.mod ! Writing 183 model components to file: J0134+0003_X_map.mod wobs J0134+0003_X_uvs.fits ! Writing UV FITS file: J0134+0003_X_uvs.fits wwins J0134+0003_X_map.win ! wwins: Wrote 11 windows to J0134+0003_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000817878 Jy ! Component: 100 - total flux cleaned = -0.00116144 Jy ! Component: 150 - total flux cleaned = -0.00142676 Jy ! Component: 200 - total flux cleaned = -0.00170407 Jy ! Component: 250 - total flux cleaned = -0.00192223 Jy ! Component: 300 - total flux cleaned = -0.00211048 Jy ! Component: 350 - total flux cleaned = -0.00231656 Jy ! Component: 400 - total flux cleaned = -0.00247268 Jy ! Component: 450 - total flux cleaned = -0.00255933 Jy ! Component: 500 - total flux cleaned = -0.00266548 Jy ! Component: 550 - total flux cleaned = -0.00270724 Jy ! Component: 600 - total flux cleaned = -0.00282986 Jy ! Component: 650 - total flux cleaned = -0.00288921 Jy ! Component: 700 - total flux cleaned = -0.00298743 Jy ! Component: 750 - total flux cleaned = -0.00306497 Jy ! Component: 800 - total flux cleaned = -0.00315984 Jy ! Component: 850 - total flux cleaned = -0.00321573 Jy ! Component: 900 - total flux cleaned = -0.00330732 Jy ! Component: 950 - total flux cleaned = -0.00336166 Jy ! Component: 1000 - total flux cleaned = -0.00345072 Jy ! Component: 1050 - total flux cleaned = -0.00345057 Jy ! Component: 1100 - total flux cleaned = -0.00350253 Jy ! Component: 1150 - total flux cleaned = -0.00358799 Jy ! Component: 1200 - total flux cleaned = -0.00363843 Jy ! Component: 1250 - total flux cleaned = -0.0035884 Jy ! Component: 1300 - total flux cleaned = -0.00367095 Jy ! Component: 1350 - total flux cleaned = -0.00368742 Jy ! Component: 1400 - total flux cleaned = -0.0037677 Jy ! Component: 1450 - total flux cleaned = -0.003752 Jy ! Component: 1500 - total flux cleaned = -0.00383051 Jy ! Component: 1550 - total flux cleaned = -0.00387707 Jy ! Component: 1600 - total flux cleaned = -0.00392314 Jy ! Component: 1650 - total flux cleaned = -0.00399868 Jy ! Component: 1700 - total flux cleaned = -0.00402858 Jy ! Component: 1750 - total flux cleaned = -0.00396941 Jy ! Component: 1800 - total flux cleaned = -0.00411615 Jy ! Component: 1850 - total flux cleaned = -0.00417414 Jy ! Component: 1900 - total flux cleaned = -0.00415978 Jy ! Component: 1950 - total flux cleaned = -0.00421677 Jy ! Component: 2000 - total flux cleaned = -0.00423087 Jy ! Component: 2050 - total flux cleaned = -0.00423074 Jy ! Component: 2100 - total flux cleaned = -0.00421713 Jy ! Component: 2150 - total flux cleaned = -0.0042447 Jy ! Component: 2200 - total flux cleaned = -0.0042718 Jy ! Component: 2250 - total flux cleaned = -0.00432522 Jy ! Component: 2300 - total flux cleaned = -0.00425876 Jy ! Component: 2350 - total flux cleaned = -0.00421919 Jy ! Component: 2400 - total flux cleaned = -0.00423225 Jy ! Component: 2450 - total flux cleaned = -0.00425796 Jy ! Component: 2500 - total flux cleaned = -0.00425791 Jy ! Component: 2550 - total flux cleaned = -0.00423244 Jy ! Component: 2600 - total flux cleaned = -0.00425763 Jy ! Component: 2650 - total flux cleaned = -0.00423266 Jy ! Component: 2700 - total flux cleaned = -0.00426973 Jy ! Component: 2750 - total flux cleaned = -0.00424525 Jy ! Component: 2800 - total flux cleaned = -0.00423317 Jy ! Component: 2850 - total flux cleaned = -0.00423315 Jy ! Component: 2900 - total flux cleaned = -0.00420929 Jy ! Component: 2950 - total flux cleaned = -0.00419755 Jy ! Component: 3000 - total flux cleaned = -0.00422132 Jy ! Component: 3050 - total flux cleaned = -0.00423284 Jy ! Component: 3100 - total flux cleaned = -0.00423269 Jy ! Component: 3150 - total flux cleaned = -0.00423281 Jy ! Component: 3200 - total flux cleaned = -0.00422147 Jy ! Component: 3250 - total flux cleaned = -0.0042779 Jy ! Component: 3300 - total flux cleaned = -0.00424434 Jy ! Component: 3350 - total flux cleaned = -0.00424425 Jy ! Component: 3400 - total flux cleaned = -0.00424428 Jy ! Component: 3450 - total flux cleaned = -0.00423325 Jy ! Component: 3500 - total flux cleaned = -0.00421154 Jy ! Component: 3550 - total flux cleaned = -0.00422234 Jy ! Component: 3600 - total flux cleaned = -0.00419012 Jy ! Component: 3650 - total flux cleaned = -0.00419008 Jy ! Component: 3700 - total flux cleaned = -0.00419001 Jy ! Component: 3750 - total flux cleaned = -0.00417947 Jy ! Component: 3800 - total flux cleaned = -0.00417946 Jy ! Component: 3850 - total flux cleaned = -0.00412748 Jy ! Component: 3900 - total flux cleaned = -0.00411721 Jy ! Component: 3950 - total flux cleaned = -0.00406601 Jy ! Component: 4000 - total flux cleaned = -0.00407615 Jy ! Component: 4050 - total flux cleaned = -0.00402557 Jy ! Total flux subtracted in 4096 components = -0.00399542 Jy ! Clean residual min=-0.000669 max=0.000602 Jy/beam ! Clean residual mean=-0.000000 rms=0.000171 Jy/beam ! Combined flux in latest and established models = 0.159238 Jy keep ! Adding 309 model components to the UV plane model. ! The established model now contains 492 components and 0.159238 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J0134+0003_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7773 x 1.78 at -1.181 degrees (North through East) ! Clean map min=-0.0014105 max=0.058482 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J0134+0003_X_map.fits wmodel /vlbi/uf001/uva//J0134+0003_X_map.mod ! Writing 492 model components to file: /vlbi/uf001/uva//J0134+0003_X_map.mod wobs /vlbi/uf001/uva//J0134+0003_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J0134+0003_X_uvs.fits wwins /vlbi/uf001/uva//J0134+0003_X_map.win ! wwins: Wrote 12 windows to /vlbi/uf001/uva//J0134+0003_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0584821 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000169837 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.871223 0.871223 1.74245 3.48489 6.96979 13.9396 27.8791 55.7583 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.058 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 344.343 quit ! Quitting program ! Log file /vlbi/uf001/uva//J0134+0003_X_dfm.log closed on Sun Jan 13 21:02:13 2019