! Started logfile: /vlbi/uf001/uvm//J0133-4430_S_a_dfm.log on Sun Jan 13 20:29:27 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /vlbi/uf001/uvm//J0133-4430_S_a_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J0133-4430_S_a_uvm.fits ! AN table 1: 29 integrations on 15 of 15 possible baselines. ! AN table 2: 58 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.805203 visibilities/baseline/integration-bin. ! Found source: J0133-4430 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 3993 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0133-4430_S_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 70 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 70 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 70 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.036954Jy sigma=13.122833 ! Fit after self-cal, rms=0.756810Jy sigma=9.329587 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.515 mas, bmaj=8.544 mas, bpa=-8.584 degrees ! Estimated noise=1.66007 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.181117 Jy ! Component: 100 - total flux cleaned = 0.236785 Jy ! Total flux subtracted in 100 components = 0.236785 Jy ! Clean residual min=-0.020319 max=0.038317 Jy/beam ! Clean residual mean=0.000262 rms=0.006671 Jy/beam ! Combined flux in latest and established models = 0.236786 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.236786 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.133927Jy sigma=1.662980 ! Fit after self-cal, rms=0.133868Jy sigma=1.662007 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.084 mas, bmaj=10.6 mas, bpa=-6.617 degrees ! Estimated noise=0.921147 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.050761 Jy ! Component: 100 - total flux cleaned = 0.0781813 Jy ! Component: 150 - total flux cleaned = 0.0931561 Jy ! Component: 200 - total flux cleaned = 0.101364 Jy ! Total flux subtracted in 200 components = 0.101364 Jy ! Clean residual min=-0.022572 max=0.030632 Jy/beam ! Clean residual mean=0.000261 rms=0.006281 Jy/beam ! Combined flux in latest and established models = 0.338149 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 34 components and 0.338149 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.117684Jy sigma=1.368395 ! Fit after self-cal, rms=0.117682Jy sigma=1.367404 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.084 x 10.6 at -6.617 degrees (North through East) ! Clean map min=-0.022133 max=0.22216 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.96 KP 0.95 LA 0.98 NL 1.95 ! PT 0.89 SC 1.08 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.89 LA 0.93 MK 0.93 NL 1.78 ! OV 1.05 PT 1.01 SC 1.08 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 0.99 KP 0.95 LA 0.95 NL 2.06 ! PT 0.78 SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.91 LA 0.96 MK 0.94 NL 1.58 ! OV 1.02 PT 0.95 SC 1.10 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 0.96 KP 0.97 LA 0.97 NL 2.31 ! PT 0.74 SC 1.12 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.92 LA 0.97 MK 0.95 NL 1.64 ! OV 1.02 PT 0.94 SC 1.16 ! ! ! Fit before self-cal, rms=0.117682Jy sigma=1.367404 ! Fit after self-cal, rms=0.128922Jy sigma=1.151976 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.081 mas, bmaj=10.73 mas, bpa=-7.28 degrees ! Estimated noise=0.939256 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00206961 Jy ! Component: 100 - total flux cleaned = -0.00227001 Jy ! Component: 150 - total flux cleaned = -0.00243344 Jy ! Component: 200 - total flux cleaned = -0.0027091 Jy ! Total flux subtracted in 200 components = -0.0027091 Jy ! Clean residual min=-0.007755 max=0.007607 Jy/beam ! Clean residual mean=0.000068 rms=0.001878 Jy/beam ! Combined flux in latest and established models = 0.33544 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 51 components and 0.33544 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.128432Jy sigma=1.144146 ! Fit after self-cal, rms=0.129433Jy sigma=1.141823 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.129433Jy sigma=1.141823 ! Fit after self-cal, rms=0.131062Jy sigma=1.131851 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.091 mas, bmaj=10.86 mas, bpa=-6.903 degrees ! Estimated noise=0.941376 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00164689 Jy ! Component: 100 - total flux cleaned = -0.00153498 Jy ! Component: 150 - total flux cleaned = -0.00142935 Jy ! Component: 200 - total flux cleaned = -0.00132959 Jy ! Total flux subtracted in 200 components = -0.00132959 Jy ! Clean residual min=-0.006467 max=0.007446 Jy/beam ! Clean residual mean=0.000055 rms=0.001588 Jy/beam ! Combined flux in latest and established models = 0.334111 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 63 components and 0.334111 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.130852Jy sigma=1.128644 ! Fit after self-cal, rms=0.130880Jy sigma=1.128508 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (13, 10.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00711288 Jy ! Component: 100 - total flux cleaned = 0.00714891 Jy ! Component: 150 - total flux cleaned = 0.00688926 Jy ! Component: 200 - total flux cleaned = 0.00677244 Jy ! Total flux subtracted in 200 components = 0.00677244 Jy ! Clean residual min=-0.006143 max=0.005543 Jy/beam ! Clean residual mean=0.000051 rms=0.001340 Jy/beam ! Combined flux in latest and established models = 0.340883 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 81 components and 0.340883 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.130353Jy sigma=1.120879 ! Fit after self-cal, rms=0.130320Jy sigma=1.120330 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.130320Jy sigma=1.120330 ! Fit after self-cal, rms=0.129398Jy sigma=1.118727 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.087 mas, bmaj=10.92 mas, bpa=-6.667 degrees ! Estimated noise=0.936076 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00282839 Jy ! Component: 100 - total flux cleaned = 0.00295041 Jy ! Component: 150 - total flux cleaned = 0.00277923 Jy ! Component: 200 - total flux cleaned = 0.00270182 Jy ! Total flux subtracted in 200 components = 0.00270182 Jy ! Clean residual min=-0.005095 max=0.004602 Jy/beam ! Clean residual mean=0.000051 rms=0.001108 Jy/beam ! Combined flux in latest and established models = 0.343585 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 95 components and 0.343585 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.129176Jy sigma=1.116000 ! Fit after self-cal, rms=0.129145Jy sigma=1.115813 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000569449 Jy ! Component: 100 - total flux cleaned = 0.000570909 Jy ! Component: 150 - total flux cleaned = 0.000503749 Jy ! Component: 200 - total flux cleaned = 0.000441284 Jy ! Total flux subtracted in 200 components = 0.000441284 Jy ! Clean residual min=-0.004593 max=0.004354 Jy/beam ! Clean residual mean=0.000051 rms=0.001065 Jy/beam ! Combined flux in latest and established models = 0.344026 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 102 components and 0.344026 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.129046Jy sigma=1.114978 ! Fit after self-cal, rms=0.129033Jy sigma=1.114947 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.129033Jy sigma=1.114947 ! Fit after self-cal, rms=0.128185Jy sigma=1.114579 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.896 mas, bmaj=31.15 mas, bpa=-1.433 degrees ! Estimated noise=1.18538 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000816868 Jy ! Component: 100 - total flux cleaned = 0.000651266 Jy ! Component: 150 - total flux cleaned = 0.000512502 Jy ! Component: 200 - total flux cleaned = 0.000360652 Jy ! Total flux subtracted in 200 components = 0.000360652 Jy ! Clean residual min=-0.003339 max=0.003689 Jy/beam ! Clean residual mean=0.000104 rms=0.001030 Jy/beam ! Combined flux in latest and established models = 0.344387 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 111 components and 0.344387 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.128163Jy sigma=1.114653 ! Fit after self-cal, rms=0.128144Jy sigma=1.114520 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000107292 Jy ! Component: 100 - total flux cleaned = -3.76111e-06 Jy ! Component: 150 - total flux cleaned = -9.8119e-05 Jy ! Component: 200 - total flux cleaned = -0.000178305 Jy ! Total flux subtracted in 200 components = -0.000178305 Jy ! Clean residual min=-0.003402 max=0.003524 Jy/beam ! Clean residual mean=0.000105 rms=0.001023 Jy/beam ! Combined flux in latest and established models = 0.344208 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 124 components and 0.344208 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.128137Jy sigma=1.114751 ! Fit after self-cal, rms=0.128133Jy sigma=1.114708 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.085 mas, bmaj=10.94 mas, bpa=-6.594 degrees ! Estimated noise=0.932955 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.085 x 10.94 at -6.594 degrees (North through East) ! Clean map min=-0.0044545 max=0.23068 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.505 mas, bmaj=8.697 mas, bpa=-8.567 degrees ! Estimated noise=1.7145 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.186837 Jy ! Component: 100 - total flux cleaned = 0.243729 Jy ! Component: 150 - total flux cleaned = 0.274438 Jy ! Component: 200 - total flux cleaned = 0.292905 Jy ! Total flux subtracted in 200 components = 0.292905 Jy ! Clean residual min=-0.008838 max=0.010389 Jy/beam ! Clean residual mean=0.000083 rms=0.002433 Jy/beam ! Combined flux in latest and established models = 0.292905 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 50 model components to the UV plane model. ! The established model now contains 50 components and 0.292905 Jy ! Inverting map and beam ! Estimated beam: bmin=3.085 mas, bmaj=10.94 mas, bpa=-6.594 degrees ! Estimated noise=0.932955 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.018714 Jy ! Component: 100 - total flux cleaned = 0.0296446 Jy ! Component: 150 - total flux cleaned = 0.0367313 Jy ! Component: 200 - total flux cleaned = 0.0413764 Jy ! Total flux subtracted in 200 components = 0.0413764 Jy ! Clean residual min=-0.005182 max=0.004609 Jy/beam ! Clean residual mean=0.000064 rms=0.001122 Jy/beam ! Combined flux in latest and established models = 0.334282 Jy ! Adding 79 model components to the UV plane model. ! The established model now contains 125 components and 0.334282 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.896 mas, bmaj=31.15 mas, bpa=-1.433 degrees ! Estimated noise=1.18538 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00524403 Jy ! Component: 100 - total flux cleaned = 0.00706829 Jy ! Component: 150 - total flux cleaned = 0.00730731 Jy ! Component: 200 - total flux cleaned = 0.00745582 Jy ! Total flux subtracted in 200 components = 0.00745582 Jy ! Clean residual min=-0.003572 max=0.003543 Jy/beam ! Clean residual mean=0.000109 rms=0.001153 Jy/beam ! Combined flux in latest and established models = 0.341737 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000164146 Jy ! Component: 100 - total flux cleaned = 0.000234616 Jy ! Component: 150 - total flux cleaned = 0.000237371 Jy ! Component: 200 - total flux cleaned = 0.0002375 Jy ! Total flux subtracted in 200 components = 0.0002375 Jy ! Clean residual min=-0.003431 max=0.003535 Jy/beam ! Clean residual mean=0.000108 rms=0.001112 Jy/beam ! Combined flux in latest and established models = 0.341975 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 154 components and 0.341975 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.085 mas, bmaj=10.94 mas, bpa=-6.594 degrees ! Estimated noise=0.932955 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.31753e-05 Jy ! Component: 100 - total flux cleaned = -0.000320211 Jy ! Component: 150 - total flux cleaned = -0.000322801 Jy ! Component: 200 - total flux cleaned = -0.000322217 Jy ! Total flux subtracted in 200 components = -0.000322217 Jy ! Clean residual min=-0.004778 max=0.003878 Jy/beam ! Clean residual mean=0.000056 rms=0.000965 Jy/beam ! Combined flux in latest and established models = 0.341653 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 174 components and 0.341653 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.128104Jy sigma=1.113011 ! Fit after self-cal, rms=0.128027Jy sigma=1.112649 wmodel J0133-4430_S_a_map.mod ! Writing 174 model components to file: J0133-4430_S_a_map.mod wobs J0133-4430_S_a_uvs.fits ! Writing UV FITS file: J0133-4430_S_a_uvs.fits wwins J0133-4430_S_a_map.win ! wwins: Wrote 2 windows to J0133-4430_S_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00171395 Jy ! Component: 100 - total flux cleaned = -0.00178234 Jy ! Component: 150 - total flux cleaned = -0.00178171 Jy ! Component: 200 - total flux cleaned = -0.00178319 Jy ! Component: 250 - total flux cleaned = -0.00168209 Jy ! Component: 300 - total flux cleaned = -0.00153708 Jy ! Component: 350 - total flux cleaned = -0.0014444 Jy ! Component: 400 - total flux cleaned = -0.00131106 Jy ! Component: 450 - total flux cleaned = -0.00114132 Jy ! Component: 500 - total flux cleaned = -0.00093629 Jy ! Component: 550 - total flux cleaned = -0.000621447 Jy ! Component: 600 - total flux cleaned = -0.000279468 Jy ! Component: 650 - total flux cleaned = -5.94421e-05 Jy ! Component: 700 - total flux cleaned = 0.00026085 Jy ! Component: 750 - total flux cleaned = 0.000467826 Jy ! Component: 800 - total flux cleaned = 0.000703503 Jy ! Component: 850 - total flux cleaned = 0.000964974 Jy ! Component: 900 - total flux cleaned = 0.00109237 Jy ! Component: 950 - total flux cleaned = 0.00115513 Jy ! Component: 1000 - total flux cleaned = 0.00130907 Jy ! Component: 1050 - total flux cleaned = 0.00142925 Jy ! Component: 1100 - total flux cleaned = 0.00142902 Jy ! Component: 1150 - total flux cleaned = 0.00148674 Jy ! Component: 1200 - total flux cleaned = 0.00151474 Jy ! Component: 1250 - total flux cleaned = 0.00154271 Jy ! Component: 1300 - total flux cleaned = 0.00154279 Jy ! Component: 1350 - total flux cleaned = 0.00151625 Jy ! Component: 1400 - total flux cleaned = 0.00162199 Jy ! Component: 1450 - total flux cleaned = 0.00162202 Jy ! Component: 1500 - total flux cleaned = 0.00167347 Jy ! Component: 1550 - total flux cleaned = 0.00167362 Jy ! Component: 1600 - total flux cleaned = 0.00172316 Jy ! Component: 1650 - total flux cleaned = 0.00172304 Jy ! Component: 1700 - total flux cleaned = 0.00172296 Jy ! Component: 1750 - total flux cleaned = 0.00174694 Jy ! Component: 1800 - total flux cleaned = 0.00181691 Jy ! Component: 1850 - total flux cleaned = 0.00188533 Jy ! Component: 1900 - total flux cleaned = 0.00183998 Jy ! Component: 1950 - total flux cleaned = 0.00192935 Jy ! Component: 2000 - total flux cleaned = 0.00192885 Jy ! Component: 2050 - total flux cleaned = 0.00188505 Jy ! Component: 2100 - total flux cleaned = 0.00192833 Jy ! Component: 2150 - total flux cleaned = 0.00188562 Jy ! Component: 2200 - total flux cleaned = 0.00192805 Jy ! Component: 2250 - total flux cleaned = 0.0019488 Jy ! Component: 2300 - total flux cleaned = 0.00199007 Jy ! Component: 2350 - total flux cleaned = 0.00198987 Jy ! Component: 2400 - total flux cleaned = 0.00194939 Jy ! Component: 2450 - total flux cleaned = 0.00196976 Jy ! Component: 2500 - total flux cleaned = 0.00200927 Jy ! Component: 2550 - total flux cleaned = 0.00196984 Jy ! Component: 2600 - total flux cleaned = 0.00195025 Jy ! Component: 2650 - total flux cleaned = 0.00189248 Jy ! Component: 2700 - total flux cleaned = 0.00193081 Jy ! Component: 2750 - total flux cleaned = 0.00191189 Jy ! Component: 2800 - total flux cleaned = 0.00183685 Jy ! Component: 2850 - total flux cleaned = 0.00189276 Jy ! Component: 2900 - total flux cleaned = 0.00183731 Jy ! Component: 2950 - total flux cleaned = 0.00181892 Jy ! Component: 3000 - total flux cleaned = 0.001837 Jy ! Component: 3050 - total flux cleaned = 0.00180091 Jy ! Component: 3100 - total flux cleaned = 0.00181877 Jy ! Component: 3150 - total flux cleaned = 0.00183628 Jy ! Component: 3200 - total flux cleaned = 0.00176576 Jy ! Component: 3250 - total flux cleaned = 0.00171328 Jy ! Component: 3300 - total flux cleaned = 0.00167854 Jy ! Component: 3350 - total flux cleaned = 0.00159194 Jy ! Component: 3400 - total flux cleaned = 0.00150603 Jy ! Component: 3450 - total flux cleaned = 0.00145476 Jy ! Component: 3500 - total flux cleaned = 0.00138686 Jy ! Component: 3550 - total flux cleaned = 0.00136995 Jy ! Component: 3600 - total flux cleaned = 0.00135314 Jy ! Component: 3650 - total flux cleaned = 0.00128628 Jy ! Component: 3700 - total flux cleaned = 0.00133615 Jy ! Component: 3750 - total flux cleaned = 0.00126987 Jy ! Component: 3800 - total flux cleaned = 0.00120392 Jy ! Component: 3850 - total flux cleaned = 0.00120392 Jy ! Component: 3900 - total flux cleaned = 0.00122036 Jy ! Component: 3950 - total flux cleaned = 0.00115516 Jy ! Component: 4000 - total flux cleaned = 0.00122006 Jy ! Component: 4050 - total flux cleaned = 0.00115521 Jy ! Total flux subtracted in 4096 components = 0.0011391 Jy ! Clean residual min=-0.000939 max=0.000961 Jy/beam ! Clean residual mean=-0.000011 rms=0.000278 Jy/beam ! Combined flux in latest and established models = 0.342792 Jy keep ! Adding 262 model components to the UV plane model. ! The established model now contains 436 components and 0.342792 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J0133-4430_S_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.085 x 10.94 at -6.594 degrees (North through East) ! Clean map min=-0.0025968 max=0.24933 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J0133-4430_S_a_map.fits wmodel /vlbi/uf001/uvm//J0133-4430_S_a_map.mod ! Writing 436 model components to file: /vlbi/uf001/uvm//J0133-4430_S_a_map.mod wobs /vlbi/uf001/uvm//J0133-4430_S_a_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J0133-4430_S_a_uvs.fits wwins /vlbi/uf001/uvm//J0133-4430_S_a_map.win ! wwins: Wrote 3 windows to /vlbi/uf001/uvm//J0133-4430_S_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.249334 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000277519 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.333913 0.333913 0.667825 1.33565 2.6713 5.3426 10.6852 21.3704 42.7408 85.4816 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.249 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 898.438 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J0133-4430_S_a_dfm.log closed on Sun Jan 13 20:29:32 2019