! Started logfile: /vlbi/uf001/uva//J0132-0804_S_dfm.log on Sun Jan 13 21:01:51 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J0132-0804_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0132-0804_S_uva.fits
! AN table 1: 74 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.994208 visibilities/baseline/integration-bin.
! Found source: J0132-0804
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 6180 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0132-0804_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 16 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 16 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 16 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.008244Jy  sigma=17.908263
! Fit after  self-cal, rms=0.883025Jy  sigma=15.783922
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.828 mas, bmaj=14.68 mas, bpa=-18.57 degrees
! Estimated noise=0.801966 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0933076 Jy
! Component: 100  -  total flux cleaned = 0.127065 Jy
! Total flux subtracted in 100 components = 0.127065 Jy
! Clean residual min=-0.013522 max=0.030362 Jy/beam
! Clean residual mean=-0.000123 rms=0.004355 Jy/beam
! Combined flux in latest and established models = 0.127065 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.127065 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.109972Jy  sigma=1.614634
! Fit after  self-cal, rms=0.109141Jy  sigma=1.602175
! Inverting map 
! Added new window around map position (6.5, -1.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0293195 Jy
! Component: 100  -  total flux cleaned = 0.0470117 Jy
! Total flux subtracted in 100 components = 0.0470117 Jy
! Clean residual min=-0.008594 max=0.013786 Jy/beam
! Clean residual mean=-0.000073 rms=0.002609 Jy/beam
! Combined flux in latest and established models = 0.174076 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 42 components and 0.174076 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.098332Jy  sigma=1.370758
! Fit after  self-cal, rms=0.097289Jy  sigma=1.354479
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0154174 Jy
! Component: 100  -  total flux cleaned = 0.0251408 Jy
! Total flux subtracted in 100 components = 0.0251408 Jy
! Clean residual min=-0.006844 max=0.008473 Jy/beam
! Clean residual mean=-0.000044 rms=0.001807 Jy/beam
! Combined flux in latest and established models = 0.199217 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 61 components and 0.199217 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.093780Jy  sigma=1.279145
! Fit after  self-cal, rms=0.093442Jy  sigma=1.274201
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.351 mas, bmaj=14.65 mas, bpa=-18.01 degrees
! Estimated noise=0.533017 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0115146 Jy
! Component: 100  -  total flux cleaned = 0.0174779 Jy
! Component: 150  -  total flux cleaned = 0.0215245 Jy
! Component: 200  -  total flux cleaned = 0.0235295 Jy
! Total flux subtracted in 200 components = 0.0235295 Jy
! Clean residual min=-0.005090 max=0.004593 Jy/beam
! Clean residual mean=-0.000022 rms=0.001322 Jy/beam
! Combined flux in latest and established models = 0.222747 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 88 components and 0.222747 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.091845Jy  sigma=1.241607
! Fit after  self-cal, rms=0.091620Jy  sigma=1.238351
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.351 x 14.65 at -18.01 degrees (North through East)
! Clean map  min=-0.0046678  max=0.11747 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.76     FD        0.93     HN        0.97     KP        0.99     
!   LA        0.98     MK        1.05     NL        1.07     OV        1.04     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.98     HN        1.02     KP        0.99     
!   LA        0.98     MK        1.03     NL        1.00     OV        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.02     HN        1.03     KP        0.99     
!   LA        0.97     MK        1.00     NL        1.07     OV        1.02     
! 
! 
! Fit before self-cal, rms=0.091620Jy  sigma=1.238351
! Fit after  self-cal, rms=0.089173Jy  sigma=1.226356
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.392 mas, bmaj=14.4 mas, bpa=-17.89 degrees
! Estimated noise=0.530119 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0013203 Jy
! Component: 100  -  total flux cleaned = 0.00113769 Jy
! Component: 150  -  total flux cleaned = 0.00105871 Jy
! Component: 200  -  total flux cleaned = 0.00124071 Jy
! Total flux subtracted in 200 components = 0.00124071 Jy
! Clean residual min=-0.004309 max=0.004028 Jy/beam
! Clean residual mean=-0.000008 rms=0.001035 Jy/beam
! Combined flux in latest and established models = 0.223987 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 111 components and 0.223987 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088988Jy  sigma=1.223007
! Fit after  self-cal, rms=0.088924Jy  sigma=1.222329
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088924Jy  sigma=1.222329
! Fit after  self-cal, rms=0.089204Jy  sigma=1.217110
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.408 mas, bmaj=14.29 mas, bpa=-17.71 degrees
! Estimated noise=0.527949 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.29189e-05 Jy
! Component: 100  -  total flux cleaned = 2.29943e-05 Jy
! Component: 150  -  total flux cleaned = 2.84598e-05 Jy
! Component: 200  -  total flux cleaned = -6.33146e-05 Jy
! Total flux subtracted in 200 components = -6.33146e-05 Jy
! Clean residual min=-0.003719 max=0.003242 Jy/beam
! Clean residual mean=-0.000006 rms=0.000883 Jy/beam
! Combined flux in latest and established models = 0.223924 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 131 components and 0.223924 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.089100Jy  sigma=1.215324
! Fit after  self-cal, rms=0.089104Jy  sigma=1.215004
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.81061e-05 Jy
! Component: 100  -  total flux cleaned = -0.00029414 Jy
! Component: 150  -  total flux cleaned = -0.000435246 Jy
! Component: 200  -  total flux cleaned = -0.000467905 Jy
! Total flux subtracted in 200 components = -0.000467905 Jy
! Clean residual min=-0.003516 max=0.003300 Jy/beam
! Clean residual mean=-0.000006 rms=0.000855 Jy/beam
! Combined flux in latest and established models = 0.223456 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 145 components and 0.223456 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.089066Jy  sigma=1.214321
! Fit after  self-cal, rms=0.089053Jy  sigma=1.214218
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.089053Jy  sigma=1.214218
! Fit after  self-cal, rms=0.089251Jy  sigma=1.213937
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.416 mas, bmaj=14.24 mas, bpa=-17.68 degrees
! Estimated noise=0.527799 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000825433 Jy
! Component: 100  -  total flux cleaned = -0.000800697 Jy
! Component: 150  -  total flux cleaned = -0.000598381 Jy
! Component: 200  -  total flux cleaned = -0.000492131 Jy
! Total flux subtracted in 200 components = -0.000492131 Jy
! Clean residual min=-0.003419 max=0.003244 Jy/beam
! Clean residual mean=-0.000006 rms=0.000831 Jy/beam
! Combined flux in latest and established models = 0.222964 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 154 components and 0.222964 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.089215Jy  sigma=1.213400
! Fit after  self-cal, rms=0.089211Jy  sigma=1.213321
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.87804e-07 Jy
! Component: 100  -  total flux cleaned = 5.35777e-05 Jy
! Component: 150  -  total flux cleaned = 3.15741e-05 Jy
! Component: 200  -  total flux cleaned = 5.28222e-05 Jy
! Total flux subtracted in 200 components = 5.28222e-05 Jy
! Clean residual min=-0.003319 max=0.003253 Jy/beam
! Clean residual mean=-0.000006 rms=0.000820 Jy/beam
! Combined flux in latest and established models = 0.223017 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 161 components and 0.223017 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.089195Jy  sigma=1.213056
! Fit after  self-cal, rms=0.089188Jy  sigma=1.213011
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.089188Jy  sigma=1.213011
! Fit after  self-cal, rms=0.089240Jy  sigma=1.212905
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.223 mas, bmaj=15.55 mas, bpa=-10.72 degrees
! Estimated noise=0.643065 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000334035 Jy
! Component: 100  -  total flux cleaned = -0.000368037 Jy
! Component: 150  -  total flux cleaned = -0.000363675 Jy
! Component: 200  -  total flux cleaned = -0.000385931 Jy
! Total flux subtracted in 200 components = -0.000385931 Jy
! Clean residual min=-0.003862 max=0.004798 Jy/beam
! Clean residual mean=-0.000009 rms=0.001185 Jy/beam
! Combined flux in latest and established models = 0.222631 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 175 components and 0.222631 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.089234Jy  sigma=1.212819
! Fit after  self-cal, rms=0.089226Jy  sigma=1.212626
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.47224e-06 Jy
! Component: 100  -  total flux cleaned = -7.78327e-05 Jy
! Component: 150  -  total flux cleaned = -7.655e-05 Jy
! Component: 200  -  total flux cleaned = -5.51096e-05 Jy
! Total flux subtracted in 200 components = -5.51096e-05 Jy
! Clean residual min=-0.003889 max=0.004750 Jy/beam
! Clean residual mean=-0.000009 rms=0.001173 Jy/beam
! Combined flux in latest and established models = 0.222576 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 185 components and 0.222576 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.089225Jy  sigma=1.212695
! Fit after  self-cal, rms=0.089220Jy  sigma=1.212590
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.423 mas, bmaj=14.2 mas, bpa=-17.66 degrees
! Estimated noise=0.528049 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.423 x 14.2 at -17.66 degrees (North through East)
! Clean map  min=-0.0030239  max=0.1163 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.887 mas, bmaj=14.27 mas, bpa=-18.33 degrees
! Estimated noise=0.804799 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0969414 Jy
! Component: 100  -  total flux cleaned = 0.138648 Jy
! Component: 150  -  total flux cleaned = 0.163104 Jy
! Component: 200  -  total flux cleaned = 0.179188 Jy
! Total flux subtracted in 200 components = 0.179188 Jy
! Clean residual min=-0.006822 max=0.008669 Jy/beam
! Clean residual mean=-0.000053 rms=0.001926 Jy/beam
! Combined flux in latest and established models = 0.179188 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 38 model components to the UV plane model.
! The established model now contains 38 components and 0.179188 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.423 mas, bmaj=14.2 mas, bpa=-17.66 degrees
! Estimated noise=0.528049 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0140263 Jy
! Component: 100  -  total flux cleaned = 0.0225747 Jy
! Component: 150  -  total flux cleaned = 0.0281203 Jy
! Component: 200  -  total flux cleaned = 0.0318353 Jy
! Total flux subtracted in 200 components = 0.0318353 Jy
! Clean residual min=-0.003686 max=0.003243 Jy/beam
! Clean residual mean=-0.000022 rms=0.000946 Jy/beam
! Combined flux in latest and established models = 0.211023 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 63 components and 0.211023 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.223 mas, bmaj=15.55 mas, bpa=-10.72 degrees
! Estimated noise=0.643065 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00401755 Jy
! Component: 100  -  total flux cleaned = 0.00647506 Jy
! Component: 150  -  total flux cleaned = 0.00823118 Jy
! Component: 200  -  total flux cleaned = 0.00952483 Jy
! Total flux subtracted in 200 components = 0.00952483 Jy
! Clean residual min=-0.004240 max=0.004643 Jy/beam
! Clean residual mean=-0.000016 rms=0.001192 Jy/beam
! Combined flux in latest and established models = 0.220548 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000965599 Jy
! Component: 100  -  total flux cleaned = 0.00151459 Jy
! Component: 150  -  total flux cleaned = 0.00184846 Jy
! Component: 200  -  total flux cleaned = 0.00209482 Jy
! Total flux subtracted in 200 components = 0.00209482 Jy
! Clean residual min=-0.004049 max=0.004731 Jy/beam
! Clean residual mean=-0.000011 rms=0.001170 Jy/beam
! Combined flux in latest and established models = 0.222643 Jy
! Adding 67 model components to the UV plane model.
! The established model now contains 126 components and 0.222642 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.423 mas, bmaj=14.2 mas, bpa=-17.66 degrees
! Estimated noise=0.528049 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000354859 Jy
! Component: 100  -  total flux cleaned = -0.000359591 Jy
! Component: 150  -  total flux cleaned = -0.000164699 Jy
! Component: 200  -  total flux cleaned = 4.23136e-05 Jy
! Total flux subtracted in 200 components = 4.23136e-05 Jy
! Clean residual min=-0.003172 max=0.003223 Jy/beam
! Clean residual mean=-0.000007 rms=0.000805 Jy/beam
! Combined flux in latest and established models = 0.222685 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 149 components and 0.222685 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.089246Jy  sigma=1.212775
! Fit after  self-cal, rms=0.089236Jy  sigma=1.212572
wmodel J0132-0804_S_map.mod
! Writing 149 model components to file: J0132-0804_S_map.mod
wobs   J0132-0804_S_uvs.fits
! Writing UV FITS file: J0132-0804_S_uvs.fits
wwins  J0132-0804_S_map.win
! wwins: Wrote 2 windows to J0132-0804_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000181987 Jy
! Component: 100  -  total flux cleaned = 0.000185964 Jy
! Component: 150  -  total flux cleaned = -0.000110895 Jy
! Component: 200  -  total flux cleaned = -0.000387776 Jy
! Component: 250  -  total flux cleaned = -0.000647604 Jy
! Component: 300  -  total flux cleaned = -0.000894571 Jy
! Component: 350  -  total flux cleaned = -0.00108961 Jy
! Component: 400  -  total flux cleaned = -0.0013126 Jy
! Component: 450  -  total flux cleaned = -0.00148977 Jy
! Component: 500  -  total flux cleaned = -0.00169411 Jy
! Component: 550  -  total flux cleaned = -0.00192209 Jy
! Component: 600  -  total flux cleaned = -0.00214084 Jy
! Component: 650  -  total flux cleaned = -0.00232173 Jy
! Component: 700  -  total flux cleaned = -0.00243948 Jy
! Component: 750  -  total flux cleaned = -0.0025241 Jy
! Component: 800  -  total flux cleaned = -0.00249539 Jy
! Component: 850  -  total flux cleaned = -0.00236237 Jy
! Component: 900  -  total flux cleaned = -0.00244022 Jy
! Component: 950  -  total flux cleaned = -0.00231292 Jy
! Component: 1000  -  total flux cleaned = -0.00236226 Jy
! Component: 1050  -  total flux cleaned = -0.00231328 Jy
! Component: 1100  -  total flux cleaned = -0.00226529 Jy
! Component: 1150  -  total flux cleaned = -0.00219577 Jy
! Component: 1200  -  total flux cleaned = -0.00215093 Jy
! Component: 1250  -  total flux cleaned = -0.00210726 Jy
! Component: 1300  -  total flux cleaned = -0.00221519 Jy
! Component: 1350  -  total flux cleaned = -0.00223618 Jy
! Component: 1400  -  total flux cleaned = -0.00227753 Jy
! Component: 1450  -  total flux cleaned = -0.00241955 Jy
! Component: 1500  -  total flux cleaned = -0.00241921 Jy
! Component: 1550  -  total flux cleaned = -0.00243914 Jy
! Component: 1600  -  total flux cleaned = -0.0025164 Jy
! Component: 1650  -  total flux cleaned = -0.00253529 Jy
! Component: 1700  -  total flux cleaned = -0.00253573 Jy
! Component: 1750  -  total flux cleaned = -0.00251759 Jy
! Component: 1800  -  total flux cleaned = -0.00259002 Jy
! Component: 1850  -  total flux cleaned = -0.00255471 Jy
! Component: 1900  -  total flux cleaned = -0.00255481 Jy
! Component: 1950  -  total flux cleaned = -0.00262461 Jy
! Component: 2000  -  total flux cleaned = -0.00267618 Jy
! Component: 2050  -  total flux cleaned = -0.00270994 Jy
! Component: 2100  -  total flux cleaned = -0.00270983 Jy
! Component: 2150  -  total flux cleaned = -0.00275895 Jy
! Component: 2200  -  total flux cleaned = -0.00274303 Jy
! Component: 2250  -  total flux cleaned = -0.00279144 Jy
! Component: 2300  -  total flux cleaned = -0.00285472 Jy
! Component: 2350  -  total flux cleaned = -0.00282355 Jy
! Component: 2400  -  total flux cleaned = -0.00285471 Jy
! Component: 2450  -  total flux cleaned = -0.00290032 Jy
! Component: 2500  -  total flux cleaned = -0.00290008 Jy
! Component: 2550  -  total flux cleaned = -0.00294482 Jy
! Component: 2600  -  total flux cleaned = -0.0029447 Jy
! Component: 2650  -  total flux cleaned = -0.00297393 Jy
! Component: 2700  -  total flux cleaned = -0.00301724 Jy
! Component: 2750  -  total flux cleaned = -0.00303167 Jy
! Component: 2800  -  total flux cleaned = -0.00307418 Jy
! Component: 2850  -  total flux cleaned = -0.00301804 Jy
! Component: 2900  -  total flux cleaned = -0.00303197 Jy
! Component: 2950  -  total flux cleaned = -0.0030458 Jy
! Component: 3000  -  total flux cleaned = -0.0030184 Jy
! Component: 3050  -  total flux cleaned = -0.00295049 Jy
! Component: 3100  -  total flux cleaned = -0.00295058 Jy
! Component: 3150  -  total flux cleaned = -0.00288374 Jy
! Component: 3200  -  total flux cleaned = -0.00287051 Jy
! Component: 3250  -  total flux cleaned = -0.0028443 Jy
! Component: 3300  -  total flux cleaned = -0.00287037 Jy
! Component: 3350  -  total flux cleaned = -0.00283143 Jy
! Component: 3400  -  total flux cleaned = -0.00283128 Jy
! Component: 3450  -  total flux cleaned = -0.0028438 Jy
! Component: 3500  -  total flux cleaned = -0.00279321 Jy
! Component: 3550  -  total flux cleaned = -0.00280566 Jy
! Component: 3600  -  total flux cleaned = -0.00278077 Jy
! Component: 3650  -  total flux cleaned = -0.00280557 Jy
! Component: 3700  -  total flux cleaned = -0.00275627 Jy
! Component: 3750  -  total flux cleaned = -0.00279298 Jy
! Component: 3800  -  total flux cleaned = -0.00276868 Jy
! Component: 3850  -  total flux cleaned = -0.00276862 Jy
! Component: 3900  -  total flux cleaned = -0.00276862 Jy
! Component: 3950  -  total flux cleaned = -0.00270901 Jy
! Component: 4000  -  total flux cleaned = -0.00272101 Jy
! Component: 4050  -  total flux cleaned = -0.00269747 Jy
! Total flux subtracted in 4096 components = -0.00268576 Jy
! Clean residual min=-0.000684 max=0.000693 Jy/beam
! Clean residual mean=-0.000002 rms=0.000213 Jy/beam
! Combined flux in latest and established models = 0.219999 Jy
keep
! Adding 307 model components to the UV plane model.
! The established model now contains 456 components and 0.219999 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0132-0804_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.423 x 14.2 at -17.66 degrees (North through East)
! Clean map  min=-0.0024452  max=0.11716 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0132-0804_S_map.fits
wmodel /vlbi/uf001/uva//J0132-0804_S_map.mod
! Writing 456 model components to file: /vlbi/uf001/uva//J0132-0804_S_map.mod
wobs   /vlbi/uf001/uva//J0132-0804_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0132-0804_S_uvs.fits
wwins  /vlbi/uf001/uva//J0132-0804_S_map.win
! wwins: Wrote 3 windows to /vlbi/uf001/uva//J0132-0804_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.11716 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000209494 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.53643 0.53643 1.07286 2.14572 4.29144 8.58288 17.1658 34.3315 68.6631
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.117 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  559.252 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0132-0804_S_dfm.log closed on Sun Jan 13 21:01:55 2019