! Started logfile: /vlbi/uf001/uvm//J0128-1722_X_a_dfm.log on Sun Jan 13 20:29:19 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uvm//J0128-1722_X_a_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J0128-1722_X_a_uvm.fits ! AN table 1: 48 integrations on 45 of 45 possible baselines. ! AN table 2: 58 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.941068 visibilities/baseline/integration-bin. ! Found source: J0128-1722 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 42732 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0128-1722_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 24 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 24 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 24 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 24 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 24 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 24 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 24 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 24 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 24 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 24 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 24 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 24 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.003962Jy sigma=20.747855 ! Fit after self-cal, rms=0.946875Jy sigma=19.547828 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6841 mas, bmaj=1.682 mas, bpa=-7.791 degrees ! Estimated noise=0.378345 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0415065 Jy ! Component: 100 - total flux cleaned = 0.0511472 Jy ! Total flux subtracted in 100 components = 0.0511472 Jy ! Clean residual min=-0.002793 max=0.004394 Jy/beam ! Clean residual mean=-0.000001 rms=0.000672 Jy/beam ! Combined flux in latest and established models = 0.0511472 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0511472 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069110Jy sigma=1.273017 ! Fit after self-cal, rms=0.067884Jy sigma=1.247710 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00520643 Jy ! Component: 100 - total flux cleaned = 0.0079894 Jy ! Total flux subtracted in 100 components = 0.0079894 Jy ! Clean residual min=-0.002839 max=0.004694 Jy/beam ! Clean residual mean=0.000001 rms=0.000646 Jy/beam ! Combined flux in latest and established models = 0.0591366 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 8 components and 0.0591366 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067428Jy sigma=1.235503 ! Fit after self-cal, rms=0.067422Jy sigma=1.235260 ! Inverting map ! Added new window around map position (9.6, 1.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00400781 Jy ! Component: 100 - total flux cleaned = 0.00605469 Jy ! Total flux subtracted in 100 components = 0.00605469 Jy ! Clean residual min=-0.002776 max=0.002764 Jy/beam ! Clean residual mean=0.000002 rms=0.000599 Jy/beam ! Combined flux in latest and established models = 0.0651913 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 23 components and 0.0651913 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067192Jy sigma=1.228157 ! Fit after self-cal, rms=0.067144Jy sigma=1.227124 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9224 mas, bmaj=2.236 mas, bpa=-7.325 degrees ! Estimated noise=0.171053 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00279748 Jy ! Component: 100 - total flux cleaned = 0.00439941 Jy ! Component: 150 - total flux cleaned = 0.00549818 Jy ! Component: 200 - total flux cleaned = 0.00614015 Jy ! Total flux subtracted in 200 components = 0.00614015 Jy ! Clean residual min=-0.002596 max=0.003131 Jy/beam ! Clean residual mean=-0.000000 rms=0.000544 Jy/beam ! Combined flux in latest and established models = 0.0713314 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 37 components and 0.0713314 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067046Jy sigma=1.223675 ! Fit after self-cal, rms=0.067027Jy sigma=1.223199 ! Inverting map ! Added new window around map position (2.4, 0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0031925 Jy ! Component: 100 - total flux cleaned = 0.00486212 Jy ! Component: 150 - total flux cleaned = 0.00594903 Jy ! Component: 200 - total flux cleaned = 0.00646457 Jy ! Total flux subtracted in 200 components = 0.00646457 Jy ! Clean residual min=-0.002371 max=0.001806 Jy/beam ! Clean residual mean=-0.000000 rms=0.000457 Jy/beam ! Combined flux in latest and established models = 0.077796 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 61 components and 0.077796 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066869Jy sigma=1.219605 ! Fit after self-cal, rms=0.066838Jy sigma=1.219000 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9224 x 2.236 at -7.325 degrees (North through East) ! Clean map min=-0.0023141 max=0.05664 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00 HN 0.84 KP 1.03 ! LA 0.95 MK 1.08 NL 1.05 OV 0.97 ! PT 0.98 SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.90 FD 0.99 HN 1.05 KP 1.02 ! LA 1.03 MK 1.04 NL 1.36 OV 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.00 HN 0.92 KP 1.00 ! LA 0.98 MK 1.10 NL 0.97 OV 0.95 ! PT 0.95 SC 1.07 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.87 FD 1.02 HN 1.08 KP 1.11 ! LA 0.97 MK 1.11 NL 1.22 OV 0.88 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.96 HN 0.85 KP 1.01 ! LA 1.00 MK 1.05 NL 1.06 OV 0.91 ! PT 0.95 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.85 FD 1.08 HN 1.03 KP 1.12 ! LA 1.07 MK 1.07 NL 1.28 OV 0.83 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.01 HN 0.84 KP 1.06 ! LA 0.98 MK 0.99 NL 1.00 OV 0.97 ! PT 0.99 SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.90 FD 1.02 HN 1.03 KP 1.12 ! LA 1.02 MK 1.02 NL 1.12 OV 0.90 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 0.92 HN 0.87 KP 1.00 ! LA 0.99 MK 0.96 NL 1.04 OV 1.00 ! PT 0.90 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.85 FD 1.00 HN 1.11 KP 1.17 ! LA 1.02 MK 0.99 NL 1.23 OV 0.92 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.97 HN 0.90 KP 0.99 ! LA 1.00 MK 1.11 NL 1.03 OV 0.99 ! PT 0.98 SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.87 FD 1.05 HN 1.02 KP 1.02 ! LA 1.00 MK 1.04 NL 1.18 OV 0.87 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.00 HN 0.87 KP 1.01 ! LA 1.06 MK 0.95 NL 1.04 OV 1.02 ! PT 0.95 SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.91 FD 1.04 HN 1.14 KP 1.11 ! LA 1.02 MK 1.09 NL 1.18 OV 0.86 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.05 HN 0.93 KP 1.02 ! LA 0.93 MK 1.07 NL 1.08 OV 1.00 ! PT 0.97 SC 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.83 FD 1.07 HN 1.03 KP 1.12 ! LA 1.02 MK 1.03 NL 1.13 OV 0.88 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.01 HN 0.94 KP 1.01 ! LA 0.91 MK 1.02 NL 0.99 OV 0.95 ! PT 0.95 SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.88 FD 1.01 HN 1.00 KP 1.09 ! LA 1.04 MK 1.07 NL 1.13 OV 0.88 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.01 HN 0.85 KP 0.95 ! LA 1.01 MK 1.13 NL 1.01 OV 0.96 ! PT 0.97 SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.84 FD 1.03 HN 0.98 KP 1.10 ! LA 1.07 MK 1.06 NL 1.13 OV 0.89 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.97 HN 0.90 KP 1.03 ! LA 0.96 MK 0.85 NL 1.01 OV 0.94 ! PT 0.96 SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.85 FD 0.99 HN 1.01 KP 1.07 ! LA 1.06 MK 0.98 NL 1.06 OV 0.88 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 0.96 HN 0.82 KP 1.03 ! LA 1.00 MK 0.84 NL 1.06 OV 0.92 ! PT 0.87 SC 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.79 FD 0.94 HN 1.00 KP 1.06 ! LA 0.96 MK 0.98 NL 1.21 OV 0.87 ! ! ! Fit before self-cal, rms=0.066838Jy sigma=1.219000 ! Fit after self-cal, rms=0.066402Jy sigma=1.211480 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9294 mas, bmaj=2.239 mas, bpa=-7.034 degrees ! Estimated noise=0.169034 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00140839 Jy ! Component: 100 - total flux cleaned = 0.00188835 Jy ! Component: 150 - total flux cleaned = 0.00217421 Jy ! Component: 200 - total flux cleaned = 0.0023567 Jy ! Total flux subtracted in 200 components = 0.0023567 Jy ! Clean residual min=-0.001156 max=0.001469 Jy/beam ! Clean residual mean=0.000000 rms=0.000315 Jy/beam ! Combined flux in latest and established models = 0.0801527 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 82 components and 0.0801527 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066368Jy sigma=1.210525 ! Fit after self-cal, rms=0.066483Jy sigma=1.209705 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066483Jy sigma=1.209705 ! Fit after self-cal, rms=0.068474Jy sigma=1.206934 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9301 mas, bmaj=2.234 mas, bpa=-6.918 degrees ! Estimated noise=0.16955 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000298022 Jy ! Component: 100 - total flux cleaned = 0.000476981 Jy ! Component: 150 - total flux cleaned = 0.000616354 Jy ! Component: 200 - total flux cleaned = 0.000675936 Jy ! Total flux subtracted in 200 components = 0.000675936 Jy ! Clean residual min=-0.001065 max=0.001349 Jy/beam ! Clean residual mean=0.000001 rms=0.000274 Jy/beam ! Combined flux in latest and established models = 0.0808286 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 96 components and 0.0808286 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068462Jy sigma=1.206642 ! Fit after self-cal, rms=0.068543Jy sigma=1.206387 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.6, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00130761 Jy ! Component: 100 - total flux cleaned = 0.00193159 Jy ! Component: 150 - total flux cleaned = 0.00214617 Jy ! Component: 200 - total flux cleaned = 0.00226575 Jy ! Total flux subtracted in 200 components = 0.00226575 Jy ! Clean residual min=-0.001018 max=0.001118 Jy/beam ! Clean residual mean=0.000000 rms=0.000250 Jy/beam ! Combined flux in latest and established models = 0.0830944 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 120 components and 0.0830944 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068516Jy sigma=1.205759 ! Fit after self-cal, rms=0.068508Jy sigma=1.205668 ! Inverting map ! Added new window around map position (14.6, 3.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00107525 Jy ! Component: 100 - total flux cleaned = 0.00172341 Jy ! Component: 150 - total flux cleaned = 0.00216491 Jy ! Component: 200 - total flux cleaned = 0.0024845 Jy ! Total flux subtracted in 200 components = 0.0024845 Jy ! Clean residual min=-0.000925 max=0.000912 Jy/beam ! Clean residual mean=-0.000000 rms=0.000229 Jy/beam ! Combined flux in latest and established models = 0.0855789 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 136 components and 0.0855789 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068489Jy sigma=1.205162 ! Fit after self-cal, rms=0.068487Jy sigma=1.205092 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068487Jy sigma=1.205092 ! Fit after self-cal, rms=0.068725Jy sigma=1.204969 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9313 mas, bmaj=2.231 mas, bpa=-6.732 degrees ! Estimated noise=0.169379 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000626731 Jy ! Component: 100 - total flux cleaned = 0.00104668 Jy ! Component: 150 - total flux cleaned = 0.00124634 Jy ! Component: 200 - total flux cleaned = 0.00135711 Jy ! Total flux subtracted in 200 components = 0.00135711 Jy ! Clean residual min=-0.000895 max=0.000923 Jy/beam ! Clean residual mean=-0.000000 rms=0.000220 Jy/beam ! Combined flux in latest and established models = 0.086936 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 145 components and 0.086936 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068716Jy sigma=1.204764 ! Fit after self-cal, rms=0.068723Jy sigma=1.204738 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000313937 Jy ! Component: 100 - total flux cleaned = 0.000433005 Jy ! Component: 150 - total flux cleaned = 0.000506551 Jy ! Component: 200 - total flux cleaned = 0.000552386 Jy ! Total flux subtracted in 200 components = 0.000552386 Jy ! Clean residual min=-0.000881 max=0.000932 Jy/beam ! Clean residual mean=-0.000000 rms=0.000219 Jy/beam ! Combined flux in latest and established models = 0.0874884 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 152 components and 0.0874884 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068719Jy sigma=1.204643 ! Fit after self-cal, rms=0.068717Jy sigma=1.204639 ! Inverting map ! Added new window around map position (21.8, 40.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000804793 Jy ! Component: 100 - total flux cleaned = 0.000950057 Jy ! Component: 150 - total flux cleaned = 0.00110024 Jy ! Component: 200 - total flux cleaned = 0.00124964 Jy ! Total flux subtracted in 200 components = 0.00124964 Jy ! Clean residual min=-0.000919 max=0.000847 Jy/beam ! Clean residual mean=-0.000000 rms=0.000214 Jy/beam ! Combined flux in latest and established models = 0.088738 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 170 components and 0.088738 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068702Jy sigma=1.204384 ! Fit after self-cal, rms=0.068696Jy sigma=1.204350 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068696Jy sigma=1.204350 ! Fit after self-cal, rms=0.068654Jy sigma=1.204316 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.153 mas, bmaj=4.436 mas, bpa=3.962 degrees ! Estimated noise=0.207349 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000658037 Jy ! Component: 100 - total flux cleaned = 0.0011214 Jy ! Component: 150 - total flux cleaned = 0.00135152 Jy ! Component: 200 - total flux cleaned = 0.00148612 Jy ! Total flux subtracted in 200 components = 0.00148612 Jy ! Clean residual min=-0.000969 max=0.001052 Jy/beam ! Clean residual mean=0.000000 rms=0.000268 Jy/beam ! Combined flux in latest and established models = 0.0902242 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 180 components and 0.0902242 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068652Jy sigma=1.204266 ! Fit after self-cal, rms=0.068649Jy sigma=1.204241 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000331408 Jy ! Component: 100 - total flux cleaned = 0.000468302 Jy ! Component: 150 - total flux cleaned = 0.000536082 Jy ! Component: 200 - total flux cleaned = 0.00056743 Jy ! Total flux subtracted in 200 components = 0.00056743 Jy ! Clean residual min=-0.000939 max=0.000998 Jy/beam ! Clean residual mean=-0.000000 rms=0.000264 Jy/beam ! Combined flux in latest and established models = 0.0907916 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 183 components and 0.0907916 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068648Jy sigma=1.204238 ! Fit after self-cal, rms=0.068649Jy sigma=1.204229 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9316 mas, bmaj=2.231 mas, bpa=-6.7 degrees ! Estimated noise=0.169257 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9316 x 2.231 at -6.7 degrees (North through East) ! Clean map min=-0.0014269 max=0.056193 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6907 mas, bmaj=1.684 mas, bpa=-7.383 degrees ! Estimated noise=0.375674 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0417888 Jy ! Component: 100 - total flux cleaned = 0.0525051 Jy ! Component: 150 - total flux cleaned = 0.0582388 Jy ! Component: 200 - total flux cleaned = 0.0621035 Jy ! Total flux subtracted in 200 components = 0.0621035 Jy ! Clean residual min=-0.002230 max=0.002305 Jy/beam ! Clean residual mean=0.000002 rms=0.000537 Jy/beam ! Combined flux in latest and established models = 0.0621035 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0621035 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9316 mas, bmaj=2.231 mas, bpa=-6.7 degrees ! Estimated noise=0.169257 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00453093 Jy ! Component: 100 - total flux cleaned = 0.00783201 Jy ! Component: 150 - total flux cleaned = 0.0104279 Jy ! Component: 200 - total flux cleaned = 0.0126006 Jy ! Total flux subtracted in 200 components = 0.0126006 Jy ! Clean residual min=-0.001324 max=0.001745 Jy/beam ! Clean residual mean=-0.000001 rms=0.000370 Jy/beam ! Combined flux in latest and established models = 0.0747041 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 53 components and 0.0747041 Jy ! Inverting map ! Added new window around map position (10.6, 1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00195584 Jy ! Component: 100 - total flux cleaned = 0.00358785 Jy ! Component: 150 - total flux cleaned = 0.00501079 Jy ! Component: 200 - total flux cleaned = 0.00626773 Jy ! Total flux subtracted in 200 components = 0.00626773 Jy ! Clean residual min=-0.001140 max=0.001049 Jy/beam ! Clean residual mean=-0.000000 rms=0.000287 Jy/beam ! Combined flux in latest and established models = 0.0809718 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 82 components and 0.0809718 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.153 mas, bmaj=4.436 mas, bpa=3.962 degrees ! Estimated noise=0.207349 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00192894 Jy ! Component: 100 - total flux cleaned = 0.00339885 Jy ! Component: 150 - total flux cleaned = 0.00457597 Jy ! Component: 200 - total flux cleaned = 0.0052343 Jy ! Total flux subtracted in 200 components = 0.0052343 Jy ! Clean residual min=-0.001096 max=0.001131 Jy/beam ! Clean residual mean=-0.000000 rms=0.000318 Jy/beam ! Combined flux in latest and established models = 0.0862061 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000562671 Jy ! Component: 100 - total flux cleaned = 0.00103188 Jy ! Component: 150 - total flux cleaned = 0.00147787 Jy ! Component: 200 - total flux cleaned = 0.00187685 Jy ! Total flux subtracted in 200 components = 0.00187685 Jy ! Clean residual min=-0.001047 max=0.001071 Jy/beam ! Clean residual mean=-0.000000 rms=0.000287 Jy/beam ! Combined flux in latest and established models = 0.088083 Jy ! Adding 73 model components to the UV plane model. ! The established model now contains 141 components and 0.088083 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9316 mas, bmaj=2.231 mas, bpa=-6.7 degrees ! Estimated noise=0.169257 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000244987 Jy ! Component: 100 - total flux cleaned = 0.000464402 Jy ! Component: 150 - total flux cleaned = 0.000561377 Jy ! Component: 200 - total flux cleaned = 0.000696161 Jy ! Total flux subtracted in 200 components = 0.000696161 Jy ! Clean residual min=-0.000942 max=0.000835 Jy/beam ! Clean residual mean=-0.000000 rms=0.000217 Jy/beam ! Combined flux in latest and established models = 0.0887791 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 163 components and 0.0887791 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068674Jy sigma=1.204759 ! Fit after self-cal, rms=0.068677Jy sigma=1.204630 wmodel J0128-1722_X_a_map.mod ! Writing 163 model components to file: J0128-1722_X_a_map.mod wobs J0128-1722_X_a_uvs.fits ! Writing UV FITS file: J0128-1722_X_a_uvs.fits wwins J0128-1722_X_a_map.win ! wwins: Wrote 7 windows to J0128-1722_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000319101 Jy ! Component: 100 - total flux cleaned = -0.000438894 Jy ! Component: 150 - total flux cleaned = -0.000496341 Jy ! Component: 200 - total flux cleaned = -0.000482498 Jy ! Component: 250 - total flux cleaned = -0.000550783 Jy ! Component: 300 - total flux cleaned = -0.000604037 Jy ! Component: 350 - total flux cleaned = -0.000656131 Jy ! Component: 400 - total flux cleaned = -0.000694667 Jy ! Component: 450 - total flux cleaned = -0.000744809 Jy ! Component: 500 - total flux cleaned = -0.000794042 Jy ! Component: 550 - total flux cleaned = -0.000878635 Jy ! Component: 600 - total flux cleaned = -0.000890538 Jy ! Component: 650 - total flux cleaned = -0.000937328 Jy ! Component: 700 - total flux cleaned = -0.00101789 Jy ! Component: 750 - total flux cleaned = -0.00101778 Jy ! Component: 800 - total flux cleaned = -0.00107389 Jy ! Component: 850 - total flux cleaned = -0.00112926 Jy ! Component: 900 - total flux cleaned = -0.00119501 Jy ! Component: 950 - total flux cleaned = -0.00124913 Jy ! Component: 1000 - total flux cleaned = -0.0013132 Jy ! Component: 1050 - total flux cleaned = -0.00136629 Jy ! Component: 1100 - total flux cleaned = -0.00147092 Jy ! Component: 1150 - total flux cleaned = -0.00153295 Jy ! Component: 1200 - total flux cleaned = -0.00159457 Jy ! Component: 1250 - total flux cleaned = -0.00171618 Jy ! Component: 1300 - total flux cleaned = -0.00176631 Jy ! Component: 1350 - total flux cleaned = -0.00180603 Jy ! Component: 1400 - total flux cleaned = -0.00185543 Jy ! Component: 1450 - total flux cleaned = -0.00190421 Jy ! Component: 1500 - total flux cleaned = -0.00195266 Jy ! Component: 1550 - total flux cleaned = -0.00204841 Jy ! Component: 1600 - total flux cleaned = -0.00209603 Jy ! Component: 1650 - total flux cleaned = -0.00215255 Jy ! Component: 1700 - total flux cleaned = -0.00217128 Jy ! Component: 1750 - total flux cleaned = -0.00223619 Jy ! Component: 1800 - total flux cleaned = -0.00228201 Jy ! Component: 1850 - total flux cleaned = -0.0023185 Jy ! Component: 1900 - total flux cleaned = -0.00237287 Jy ! Component: 1950 - total flux cleaned = -0.00243567 Jy ! Component: 2000 - total flux cleaned = -0.00244468 Jy ! Component: 2050 - total flux cleaned = -0.00247999 Jy ! Component: 2100 - total flux cleaned = -0.00251509 Jy ! Component: 2150 - total flux cleaned = -0.00257599 Jy ! Component: 2200 - total flux cleaned = -0.00259325 Jy ! Component: 2250 - total flux cleaned = -0.00262756 Jy ! Component: 2300 - total flux cleaned = -0.00266166 Jy ! Component: 2350 - total flux cleaned = -0.00267859 Jy ! Component: 2400 - total flux cleaned = -0.00271207 Jy ! Component: 2450 - total flux cleaned = -0.00274541 Jy ! Component: 2500 - total flux cleaned = -0.00275373 Jy ! Component: 2550 - total flux cleaned = -0.00278666 Jy ! Component: 2600 - total flux cleaned = -0.00282752 Jy ! Component: 2650 - total flux cleaned = -0.00286815 Jy ! Component: 2700 - total flux cleaned = -0.0028842 Jy ! Component: 2750 - total flux cleaned = -0.00290033 Jy ! Component: 2800 - total flux cleaned = -0.00287634 Jy ! Component: 2850 - total flux cleaned = -0.00291605 Jy ! Component: 2900 - total flux cleaned = -0.00291611 Jy ! Component: 2950 - total flux cleaned = -0.00297117 Jy ! Component: 3000 - total flux cleaned = -0.00297887 Jy ! Component: 3050 - total flux cleaned = -0.00300985 Jy ! Component: 3100 - total flux cleaned = -0.00304843 Jy ! Component: 3150 - total flux cleaned = -0.00306386 Jy ! Component: 3200 - total flux cleaned = -0.00308681 Jy ! Component: 3250 - total flux cleaned = -0.00309438 Jy ! Component: 3300 - total flux cleaned = -0.00315492 Jy ! Component: 3350 - total flux cleaned = -0.00321514 Jy ! Component: 3400 - total flux cleaned = -0.00320012 Jy ! Component: 3450 - total flux cleaned = -0.00323738 Jy ! Component: 3500 - total flux cleaned = -0.00324481 Jy ! Component: 3550 - total flux cleaned = -0.00325954 Jy ! Component: 3600 - total flux cleaned = -0.00327425 Jy ! Component: 3650 - total flux cleaned = -0.0033035 Jy ! Component: 3700 - total flux cleaned = -0.00331799 Jy ! Component: 3750 - total flux cleaned = -0.00336144 Jy ! Component: 3800 - total flux cleaned = -0.0033902 Jy ! Component: 3850 - total flux cleaned = -0.00343325 Jy ! Component: 3900 - total flux cleaned = -0.00343324 Jy ! Component: 3950 - total flux cleaned = -0.00349718 Jy ! Component: 4000 - total flux cleaned = -0.00347601 Jy ! Component: 4050 - total flux cleaned = -0.00353229 Jy ! Total flux subtracted in 4096 components = -0.0035323 Jy ! Clean residual min=-0.000453 max=0.000474 Jy/beam ! Clean residual mean=-0.000000 rms=0.000125 Jy/beam ! Combined flux in latest and established models = 0.0852468 Jy keep ! Adding 325 model components to the UV plane model. ! The established model now contains 488 components and 0.0852468 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J0128-1722_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9316 x 2.231 at -6.7 degrees (North through East) ! Clean map min=-0.00064455 max=0.055914 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J0128-1722_X_a_map.fits wmodel /vlbi/uf001/uvm//J0128-1722_X_a_map.mod ! Writing 488 model components to file: /vlbi/uf001/uvm//J0128-1722_X_a_map.mod wobs /vlbi/uf001/uvm//J0128-1722_X_a_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J0128-1722_X_a_uvs.fits wwins /vlbi/uf001/uvm//J0128-1722_X_a_map.win ! wwins: Wrote 8 windows to /vlbi/uf001/uvm//J0128-1722_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0559143 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000124207 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.666415 0.666415 1.33283 2.66566 5.33132 10.6626 21.3253 42.6505 85.3011 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.055 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 450.17 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J0128-1722_X_a_dfm.log closed on Sun Jan 13 20:29:26 2019