! Started logfile: /vlbi/uf001/uva//J0127+7323_X_dfm.log on Sun Jan 13 21:00:04 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J0127+7323_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J0127+7323_X_uva.fits ! AN table 1: 116 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.99751 visibilities/baseline/integration-bin. ! Found source: J0127+7323 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 62484 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0127+7323_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.004102Jy sigma=22.749777 ! Fit after self-cal, rms=0.948234Jy sigma=21.502438 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8091 mas, bmaj=0.8295 mas, bpa=-80.06 degrees ! Estimated noise=0.293238 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0321722 Jy ! Component: 100 - total flux cleaned = 0.0447455 Jy ! Total flux subtracted in 100 components = 0.0447455 Jy ! Clean residual min=-0.003200 max=0.007984 Jy/beam ! Clean residual mean=0.000002 rms=0.000747 Jy/beam ! Combined flux in latest and established models = 0.0447455 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.0447455 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071092Jy sigma=1.411257 ! Fit after self-cal, rms=0.070163Jy sigma=1.389060 ! Inverting map ! Added new window around map position (0.8, -0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0100578 Jy ! Component: 100 - total flux cleaned = 0.0169716 Jy ! Total flux subtracted in 100 components = 0.0169716 Jy ! Clean residual min=-0.002488 max=0.005383 Jy/beam ! Clean residual mean=0.000001 rms=0.000622 Jy/beam ! Combined flux in latest and established models = 0.0617172 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 30 components and 0.0617172 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066689Jy sigma=1.306750 ! Fit after self-cal, rms=0.066583Jy sigma=1.304069 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00616702 Jy ! Component: 100 - total flux cleaned = 0.0102961 Jy ! Total flux subtracted in 100 components = 0.0102961 Jy ! Clean residual min=-0.002365 max=0.005157 Jy/beam ! Clean residual mean=-0.000000 rms=0.000567 Jy/beam ! Combined flux in latest and established models = 0.0720133 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 39 components and 0.0720133 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065104Jy sigma=1.271298 ! Fit after self-cal, rms=0.065057Jy sigma=1.269945 ! Inverting map ! Added new window around map position (3, -0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00508505 Jy ! Component: 100 - total flux cleaned = 0.00842671 Jy ! Total flux subtracted in 100 components = 0.00842671 Jy ! Clean residual min=-0.002249 max=0.003996 Jy/beam ! Clean residual mean=-0.000001 rms=0.000523 Jy/beam ! Combined flux in latest and established models = 0.08044 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 46 components and 0.08044 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064116Jy sigma=1.250533 ! Fit after self-cal, rms=0.064047Jy sigma=1.248892 ! Inverting map ! Added new window around map position (14.4, 1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00415519 Jy ! Component: 100 - total flux cleaned = 0.00708002 Jy ! Total flux subtracted in 100 components = 0.00708002 Jy ! Clean residual min=-0.002066 max=0.002783 Jy/beam ! Clean residual mean=0.000000 rms=0.000489 Jy/beam ! Combined flux in latest and established models = 0.08752 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 55 components and 0.08752 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063510Jy sigma=1.237067 ! Fit after self-cal, rms=0.063474Jy sigma=1.236177 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.07 mas, bmaj=1.117 mas, bpa=-79.59 degrees ! Estimated noise=0.12979 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.8, -0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00606888 Jy ! Component: 100 - total flux cleaned = 0.0104384 Jy ! Component: 150 - total flux cleaned = 0.013841 Jy ! Component: 200 - total flux cleaned = 0.0165765 Jy ! Total flux subtracted in 200 components = 0.0165765 Jy ! Clean residual min=-0.002145 max=0.003712 Jy/beam ! Clean residual mean=-0.000005 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 0.104096 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 86 components and 0.104096 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062464Jy sigma=1.217588 ! Fit after self-cal, rms=0.062405Jy sigma=1.216297 ! Inverting map ! Added new window around map position (-1.2, 1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0033684 Jy ! Component: 100 - total flux cleaned = 0.00580935 Jy ! Component: 150 - total flux cleaned = 0.00780331 Jy ! Component: 200 - total flux cleaned = 0.00946666 Jy ! Total flux subtracted in 200 components = 0.00946666 Jy ! Clean residual min=-0.001886 max=0.002886 Jy/beam ! Clean residual mean=-0.000007 rms=0.000430 Jy/beam ! Combined flux in latest and established models = 0.113563 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 108 components and 0.113563 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062046Jy sigma=1.210496 ! Fit after self-cal, rms=0.062024Jy sigma=1.210125 ! Inverting map ! Added new window around map position (11.6, -0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00257452 Jy ! Component: 100 - total flux cleaned = 0.0042627 Jy ! Component: 150 - total flux cleaned = 0.00534495 Jy ! Component: 200 - total flux cleaned = 0.00630113 Jy ! Total flux subtracted in 200 components = 0.00630113 Jy ! Clean residual min=-0.001868 max=0.001554 Jy/beam ! Clean residual mean=-0.000005 rms=0.000390 Jy/beam ! Combined flux in latest and established models = 0.119864 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 137 components and 0.119864 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061861Jy sigma=1.206470 ! Fit after self-cal, rms=0.061837Jy sigma=1.206108 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.07 x 1.117 at -79.59 degrees (North through East) ! Clean map min=-0.0017184 max=0.045295 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.02 HN 0.94 KP 1.02 ! LA 0.99 MK 1.05 NL 1.13 OV 0.93 ! PT 0.92 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.03 HN 0.97 KP 1.03 ! LA 1.00 MK 1.09 NL 1.14 OV 0.94 ! PT 0.91 SC 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.04 HN 0.95 KP 1.03 ! LA 0.99 MK 1.12 NL 1.14 OV 0.95 ! PT 0.93 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.05 HN 0.92 KP 1.04 ! LA 0.99 MK 1.01 NL 1.10 OV 0.92 ! PT 0.94 SC 0.98 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.08 HN 0.95 KP 1.08 ! LA 0.98 MK 1.07 NL 1.14 OV 0.93 ! PT 0.92 SC 0.98 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.06 HN 0.94 KP 1.03 ! LA 0.96 MK 0.97 NL 1.11 OV 0.91 ! PT 0.94 SC 0.95 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.06 HN 1.00 KP 1.00 ! LA 1.00 MK 1.02 NL 1.14 OV 0.91 ! PT 0.94 SC 0.94 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.04 HN 0.97 KP 1.04 ! LA 0.98 MK 1.05 NL 1.16 OV 0.92 ! PT 0.95 SC 1.01 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.05 HN 0.92 KP 1.04 ! LA 1.01 MK 1.03 NL 1.14 OV 0.91 ! PT 0.95 SC 1.05 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.04 HN 0.90 KP 1.07 ! LA 1.00 MK 1.09 NL 1.13 OV 0.95 ! PT 0.93 SC 0.94 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.99 HN 0.95 KP 1.03 ! LA 1.02 MK 1.02 NL 1.13 OV 0.96 ! PT 0.92 SC 0.92 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.05 HN 0.99 KP 1.01 ! LA 0.98 MK 0.91 NL 1.16 OV 0.97 ! PT 0.98 SC 0.97 ! ! ! Fit before self-cal, rms=0.061837Jy sigma=1.206108 ! Fit after self-cal, rms=0.062407Jy sigma=1.199813 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.068 mas, bmaj=1.113 mas, bpa=-81.88 degrees ! Estimated noise=0.131957 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00141868 Jy ! Component: 100 - total flux cleaned = 0.00246522 Jy ! Component: 150 - total flux cleaned = 0.00326004 Jy ! Component: 200 - total flux cleaned = 0.00354251 Jy ! Total flux subtracted in 200 components = 0.00354251 Jy ! Clean residual min=-0.001223 max=0.001310 Jy/beam ! Clean residual mean=-0.000005 rms=0.000312 Jy/beam ! Combined flux in latest and established models = 0.123407 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 155 components and 0.123407 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062341Jy sigma=1.198841 ! Fit after self-cal, rms=0.062357Jy sigma=1.198421 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062357Jy sigma=1.198421 ! Fit after self-cal, rms=0.056905Jy sigma=1.191292 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.059 mas, bmaj=1.109 mas, bpa=-87.19 degrees ! Estimated noise=0.131226 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000363111 Jy ! Component: 100 - total flux cleaned = 0.000423185 Jy ! Component: 150 - total flux cleaned = 0.000450445 Jy ! Component: 200 - total flux cleaned = 0.000475672 Jy ! Total flux subtracted in 200 components = 0.000475672 Jy ! Clean residual min=-0.000802 max=0.000817 Jy/beam ! Clean residual mean=-0.000001 rms=0.000179 Jy/beam ! Combined flux in latest and established models = 0.123882 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 164 components and 0.123882 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056878Jy sigma=1.190740 ! Fit after self-cal, rms=0.056855Jy sigma=1.190423 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.2, 3.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000568551 Jy ! Component: 100 - total flux cleaned = 0.000642302 Jy ! Component: 150 - total flux cleaned = 0.000688198 Jy ! Component: 200 - total flux cleaned = 0.000773144 Jy ! Total flux subtracted in 200 components = 0.000773144 Jy ! Clean residual min=-0.000769 max=0.000778 Jy/beam ! Clean residual mean=-0.000001 rms=0.000172 Jy/beam ! Combined flux in latest and established models = 0.124656 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 175 components and 0.124656 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056834Jy sigma=1.190012 ! Fit after self-cal, rms=0.056831Jy sigma=1.189987 ! Inverting map ! Added new window around map position (38.8, 37.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000718923 Jy ! Component: 100 - total flux cleaned = 0.000915919 Jy ! Component: 150 - total flux cleaned = 0.00101595 Jy ! Component: 200 - total flux cleaned = 0.00111017 Jy ! Total flux subtracted in 200 components = 0.00111017 Jy ! Clean residual min=-0.000724 max=0.000676 Jy/beam ! Clean residual mean=-0.000001 rms=0.000166 Jy/beam ! Combined flux in latest and established models = 0.125766 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 188 components and 0.125766 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056813Jy sigma=1.189641 ! Fit after self-cal, rms=0.056812Jy sigma=1.189604 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056812Jy sigma=1.189604 ! Fit after self-cal, rms=0.056414Jy sigma=1.189509 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.052 mas, bmaj=1.105 mas, bpa=-89.84 degrees ! Estimated noise=0.130545 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000237745 Jy ! Component: 100 - total flux cleaned = 0.000401914 Jy ! Component: 150 - total flux cleaned = 0.000458112 Jy ! Component: 200 - total flux cleaned = 0.000547298 Jy ! Total flux subtracted in 200 components = 0.000547298 Jy ! Clean residual min=-0.000682 max=0.000658 Jy/beam ! Clean residual mean=-0.000001 rms=0.000159 Jy/beam ! Combined flux in latest and established models = 0.126313 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 191 components and 0.126313 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056400Jy sigma=1.189253 ! Fit after self-cal, rms=0.056400Jy sigma=1.189230 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.46684e-05 Jy ! Component: 100 - total flux cleaned = 0.000163773 Jy ! Component: 150 - total flux cleaned = 0.000245703 Jy ! Component: 200 - total flux cleaned = 0.000323031 Jy ! Total flux subtracted in 200 components = 0.000323031 Jy ! Clean residual min=-0.000659 max=0.000647 Jy/beam ! Clean residual mean=-0.000001 rms=0.000157 Jy/beam ! Combined flux in latest and established models = 0.126636 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 198 components and 0.126636 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056391Jy sigma=1.189050 ! Fit after self-cal, rms=0.056390Jy sigma=1.189041 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056390Jy sigma=1.189041 ! Fit after self-cal, rms=0.056119Jy sigma=1.189010 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.292 mas, bmaj=2.519 mas, bpa=81.29 degrees ! Estimated noise=0.173379 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000588932 Jy ! Component: 100 - total flux cleaned = 0.000852258 Jy ! Component: 150 - total flux cleaned = 0.000997388 Jy ! Component: 200 - total flux cleaned = 0.00112181 Jy ! Total flux subtracted in 200 components = 0.00112181 Jy ! Clean residual min=-0.000702 max=0.000797 Jy/beam ! Clean residual mean=-0.000001 rms=0.000197 Jy/beam ! Combined flux in latest and established models = 0.127758 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 219 components and 0.127758 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056116Jy sigma=1.188920 ! Fit after self-cal, rms=0.056114Jy sigma=1.188894 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000184889 Jy ! Component: 100 - total flux cleaned = 0.000284547 Jy ! Component: 150 - total flux cleaned = 0.000354451 Jy ! Component: 200 - total flux cleaned = 0.00040985 Jy ! Total flux subtracted in 200 components = 0.00040985 Jy ! Clean residual min=-0.000720 max=0.000764 Jy/beam ! Clean residual mean=-0.000000 rms=0.000193 Jy/beam ! Combined flux in latest and established models = 0.128168 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 231 components and 0.128168 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056112Jy sigma=1.188866 ! Fit after self-cal, rms=0.056112Jy sigma=1.188859 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.049 mas, bmaj=1.101 mas, bpa=88.71 degrees ! Estimated noise=0.13003 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.049 x 1.101 at 88.71 degrees (North through East) ! Clean map min=-0.00085249 max=0.044527 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7942 mas, bmaj=0.8194 mas, bpa=78.31 degrees ! Estimated noise=0.288681 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0320938 Jy ! Component: 100 - total flux cleaned = 0.0484923 Jy ! Component: 150 - total flux cleaned = 0.0593536 Jy ! Component: 200 - total flux cleaned = 0.0673268 Jy ! Total flux subtracted in 200 components = 0.0673268 Jy ! Clean residual min=-0.002454 max=0.004642 Jy/beam ! Clean residual mean=0.000000 rms=0.000596 Jy/beam ! Combined flux in latest and established models = 0.0673268 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.0673268 Jy ! Inverting map and beam ! Estimated beam: bmin=1.049 mas, bmaj=1.101 mas, bpa=88.71 degrees ! Estimated noise=0.13003 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0121244 Jy ! Component: 100 - total flux cleaned = 0.0203518 Jy ! Component: 150 - total flux cleaned = 0.0265719 Jy ! Component: 200 - total flux cleaned = 0.0314965 Jy ! Total flux subtracted in 200 components = 0.0314965 Jy ! Clean residual min=-0.001567 max=0.002946 Jy/beam ! Clean residual mean=-0.000004 rms=0.000441 Jy/beam ! Combined flux in latest and established models = 0.0988232 Jy ! Adding 65 model components to the UV plane model. ! The established model now contains 75 components and 0.0988232 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00398231 Jy ! Component: 100 - total flux cleaned = 0.00725185 Jy ! Component: 150 - total flux cleaned = 0.00995851 Jy ! Component: 200 - total flux cleaned = 0.0122204 Jy ! Total flux subtracted in 200 components = 0.0122204 Jy ! Clean residual min=-0.001073 max=0.001382 Jy/beam ! Clean residual mean=-0.000002 rms=0.000272 Jy/beam ! Combined flux in latest and established models = 0.111044 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 116 components and 0.111044 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00192396 Jy ! Component: 100 - total flux cleaned = 0.00358043 Jy ! Component: 150 - total flux cleaned = 0.00502377 Jy ! Component: 200 - total flux cleaned = 0.00630876 Jy ! Total flux subtracted in 200 components = 0.00630876 Jy ! Clean residual min=-0.000834 max=0.000872 Jy/beam ! Clean residual mean=-0.000001 rms=0.000207 Jy/beam ! Combined flux in latest and established models = 0.117352 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 151 components and 0.117352 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.292 mas, bmaj=2.519 mas, bpa=81.29 degrees ! Estimated noise=0.173379 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00221263 Jy ! Component: 100 - total flux cleaned = 0.00382097 Jy ! Component: 150 - total flux cleaned = 0.00509175 Jy ! Component: 200 - total flux cleaned = 0.00613753 Jy ! Total flux subtracted in 200 components = 0.00613753 Jy ! Clean residual min=-0.000825 max=0.000899 Jy/beam ! Clean residual mean=0.000000 rms=0.000239 Jy/beam ! Combined flux in latest and established models = 0.12349 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000868774 Jy ! Component: 100 - total flux cleaned = 0.00159838 Jy ! Component: 150 - total flux cleaned = 0.00221524 Jy ! Component: 200 - total flux cleaned = 0.0027197 Jy ! Total flux subtracted in 200 components = 0.0027197 Jy ! Clean residual min=-0.000762 max=0.000821 Jy/beam ! Clean residual mean=-0.000000 rms=0.000206 Jy/beam ! Combined flux in latest and established models = 0.12621 Jy ! Adding 111 model components to the UV plane model. ! The established model now contains 233 components and 0.12621 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.049 mas, bmaj=1.101 mas, bpa=88.71 degrees ! Estimated noise=0.13003 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.03139e-05 Jy ! Component: 100 - total flux cleaned = 0.00039015 Jy ! Component: 150 - total flux cleaned = 0.000674674 Jy ! Component: 200 - total flux cleaned = 0.000881026 Jy ! Total flux subtracted in 200 components = 0.000881026 Jy ! Clean residual min=-0.000632 max=0.000670 Jy/beam ! Clean residual mean=-0.000000 rms=0.000151 Jy/beam ! Combined flux in latest and established models = 0.127091 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 250 components and 0.127091 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056104Jy sigma=1.188808 ! Fit after self-cal, rms=0.056092Jy sigma=1.188593 wmodel J0127+7323_X_map.mod ! Writing 250 model components to file: J0127+7323_X_map.mod wobs J0127+7323_X_uvs.fits ! Writing UV FITS file: J0127+7323_X_uvs.fits wwins J0127+7323_X_map.win ! wwins: Wrote 9 windows to J0127+7323_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000151882 Jy ! Component: 100 - total flux cleaned = -0.000240871 Jy ! Component: 150 - total flux cleaned = -0.00024106 Jy ! Component: 200 - total flux cleaned = -0.000220456 Jy ! Component: 250 - total flux cleaned = -0.00020007 Jy ! Component: 300 - total flux cleaned = -0.000169914 Jy ! Component: 350 - total flux cleaned = -0.000130414 Jy ! Component: 400 - total flux cleaned = -8.18563e-05 Jy ! Component: 450 - total flux cleaned = -5.29185e-05 Jy ! Component: 500 - total flux cleaned = 3.8858e-06 Jy ! Component: 550 - total flux cleaned = 2.25272e-05 Jy ! Component: 600 - total flux cleaned = 1.34227e-05 Jy ! Component: 650 - total flux cleaned = 7.74315e-05 Jy ! Component: 700 - total flux cleaned = 7.73992e-05 Jy ! Component: 750 - total flux cleaned = 6.8475e-05 Jy ! Component: 800 - total flux cleaned = 7.74515e-05 Jy ! Component: 850 - total flux cleaned = 8.63416e-05 Jy ! Component: 900 - total flux cleaned = 0.000121257 Jy ! Component: 950 - total flux cleaned = 9.53821e-05 Jy ! Component: 1000 - total flux cleaned = 0.000121163 Jy ! Component: 1050 - total flux cleaned = 0.000129783 Jy ! Component: 1100 - total flux cleaned = 0.000129753 Jy ! Component: 1150 - total flux cleaned = 0.000113157 Jy ! Component: 1200 - total flux cleaned = 0.000113219 Jy ! Component: 1250 - total flux cleaned = 0.000129756 Jy ! Component: 1300 - total flux cleaned = 0.000146047 Jy ! Component: 1350 - total flux cleaned = 0.000129828 Jy ! Component: 1400 - total flux cleaned = 0.000105591 Jy ! Component: 1450 - total flux cleaned = 9.75602e-05 Jy ! Component: 1500 - total flux cleaned = 8.95328e-05 Jy ! Component: 1550 - total flux cleaned = 7.36778e-05 Jy ! Component: 1600 - total flux cleaned = 6.59114e-05 Jy ! Component: 1650 - total flux cleaned = 7.36618e-05 Jy ! Component: 1700 - total flux cleaned = 5.03871e-05 Jy ! Component: 1750 - total flux cleaned = 6.57982e-05 Jy ! Component: 1800 - total flux cleaned = 3.51153e-05 Jy ! Component: 1850 - total flux cleaned = 1.22822e-05 Jy ! Component: 1900 - total flux cleaned = 3.48835e-05 Jy ! Component: 1950 - total flux cleaned = 4.65415e-06 Jy ! Component: 2000 - total flux cleaned = -1.77331e-05 Jy ! Component: 2050 - total flux cleaned = 4.59457e-06 Jy ! Component: 2100 - total flux cleaned = -2.79655e-06 Jy ! Component: 2150 - total flux cleaned = -2.77726e-06 Jy ! Component: 2200 - total flux cleaned = 1.19278e-05 Jy ! Component: 2250 - total flux cleaned = -2.4527e-05 Jy ! Component: 2300 - total flux cleaned = -1.72906e-05 Jy ! Component: 2350 - total flux cleaned = -3.16514e-05 Jy ! Component: 2400 - total flux cleaned = -1.01502e-05 Jy ! Component: 2450 - total flux cleaned = 4.14682e-06 Jy ! Component: 2500 - total flux cleaned = -3.04314e-06 Jy ! Component: 2550 - total flux cleaned = 1.81679e-05 Jy ! Component: 2600 - total flux cleaned = -2.90042e-06 Jy ! Component: 2650 - total flux cleaned = -1.69241e-05 Jy ! Component: 2700 - total flux cleaned = -1.6924e-05 Jy ! Component: 2750 - total flux cleaned = -1.69515e-05 Jy ! Component: 2800 - total flux cleaned = -3.11411e-06 Jy ! Component: 2850 - total flux cleaned = -3.07507e-06 Jy ! Component: 2900 - total flux cleaned = 1.75168e-05 Jy ! Component: 2950 - total flux cleaned = 1.75357e-05 Jy ! Component: 3000 - total flux cleaned = 2.43246e-05 Jy ! Component: 3050 - total flux cleaned = 4.086e-06 Jy ! Component: 3100 - total flux cleaned = 1.74918e-05 Jy ! Component: 3150 - total flux cleaned = 5.09306e-05 Jy ! Component: 3200 - total flux cleaned = 3.09178e-05 Jy ! Component: 3250 - total flux cleaned = -2.30287e-06 Jy ! Component: 3300 - total flux cleaned = -8.94364e-06 Jy ! Component: 3350 - total flux cleaned = 2.39983e-05 Jy ! Component: 3400 - total flux cleaned = 3.05078e-05 Jy ! Component: 3450 - total flux cleaned = -8.63226e-06 Jy ! Component: 3500 - total flux cleaned = -2.16444e-05 Jy ! Component: 3550 - total flux cleaned = -2.16435e-05 Jy ! Component: 3600 - total flux cleaned = -1.5149e-05 Jy ! Component: 3650 - total flux cleaned = -2.15671e-05 Jy ! Component: 3700 - total flux cleaned = -3.44319e-05 Jy ! Component: 3750 - total flux cleaned = -3.44969e-05 Jy ! Component: 3800 - total flux cleaned = -2.8136e-05 Jy ! Component: 3850 - total flux cleaned = -4.08043e-05 Jy ! Component: 3900 - total flux cleaned = -4.71644e-05 Jy ! Component: 3950 - total flux cleaned = -8.48362e-05 Jy ! Component: 4000 - total flux cleaned = -8.48353e-05 Jy ! Component: 4050 - total flux cleaned = -9.10633e-05 Jy ! Total flux subtracted in 4096 components = -9.72754e-05 Jy ! Clean residual min=-0.000410 max=0.000343 Jy/beam ! Clean residual mean=0.000000 rms=0.000105 Jy/beam ! Combined flux in latest and established models = 0.126993 Jy keep ! Adding 370 model components to the UV plane model. ! The established model now contains 620 components and 0.126994 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J0127+7323_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.049 x 1.101 at 88.71 degrees (North through East) ! Clean map min=-0.00067214 max=0.044132 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J0127+7323_X_map.fits wmodel /vlbi/uf001/uva//J0127+7323_X_map.mod ! Writing 620 model components to file: /vlbi/uf001/uva//J0127+7323_X_map.mod wobs /vlbi/uf001/uva//J0127+7323_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J0127+7323_X_uvs.fits wwins /vlbi/uf001/uva//J0127+7323_X_map.win ! wwins: Wrote 10 windows to /vlbi/uf001/uva//J0127+7323_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0441321 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000104585 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.710943 0.710943 1.42189 2.84377 5.68754 11.3751 22.7502 45.5003 91.0007 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.044 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 421.974 quit ! Quitting program ! Log file /vlbi/uf001/uva//J0127+7323_X_dfm.log closed on Sun Jan 13 21:00:13 2019