! Started logfile: /vlbi/uf001/uva//J0121+1149_S_b_dfm.log on Sun Jan 13 20:56:40 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J0121+1149_S_b_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0121+1149_S_b_uva.fits
! AN table 1: 10 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.832143 visibilities/baseline/integration-bin.
! Found source: J0121+1149
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 699 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0121+1149_S_b]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=2.648097Jy  sigma=21.708445
! Fit after  self-cal, rms=1.421310Jy  sigma=11.582313
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.044 mas, bmaj=11.73 mas, bpa=-17.75 degrees
! Estimated noise=4.38096 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.8446 Jy
! Component: 100  -  total flux cleaned = 2.24684 Jy
! Total flux subtracted in 100 components = 2.24684 Jy
! Clean residual min=-0.080473 max=0.126857 Jy/beam
! Clean residual mean=-0.000163 rms=0.023370 Jy/beam
! Combined flux in latest and established models = 2.24684 Jy
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 2.24684 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.325094Jy  sigma=2.482309
! Fit after  self-cal, rms=0.325081Jy  sigma=2.482250
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.337 mas, bmaj=11.31 mas, bpa=-18.42 degrees
! Estimated noise=3.85577 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (76.5, -57).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.126854 Jy
! Component: 100  -  total flux cleaned = 0.19788 Jy
! Component: 150  -  total flux cleaned = 0.237161 Jy
! Component: 200  -  total flux cleaned = 0.262237 Jy
! Total flux subtracted in 200 components = 0.262237 Jy
! Clean residual min=-0.053338 max=0.077500 Jy/beam
! Clean residual mean=-0.000020 rms=0.014130 Jy/beam
! Combined flux in latest and established models = 2.50908 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 37 components and 2.50908 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.259220Jy  sigma=1.979582
! Fit after  self-cal, rms=0.257247Jy  sigma=1.953617
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.337 x 11.31 at -18.42 degrees (North through East)
! Clean map  min=-0.049982  max=2.3465 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.98     HN        1.00     KP        0.96     
!   LA        0.95     MK        0.98     NL        1.09     OV        0.99     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.89     FD        1.02     HN        1.01     KP        0.97     
!   LA        0.98     MK        1.00     NL        1.01     OV        0.97     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.01     HN        1.02     KP        0.98     
!   LA        0.95     MK        1.02     NL        1.08     OV        1.00     
! 
! 
! Fit before self-cal, rms=0.257247Jy  sigma=1.953617
! Fit after  self-cal, rms=0.203183Jy  sigma=1.536145
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.378 mas, bmaj=11.23 mas, bpa=-18.5 degrees
! Estimated noise=3.87321 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0032056 Jy
! Component: 100  -  total flux cleaned = 0.00116159 Jy
! Component: 150  -  total flux cleaned = 0.00197855 Jy
! Component: 200  -  total flux cleaned = 0.00565534 Jy
! Total flux subtracted in 200 components = 0.00565534 Jy
! Clean residual min=-0.033567 max=0.042411 Jy/beam
! Clean residual mean=0.000041 rms=0.009516 Jy/beam
! Combined flux in latest and established models = 2.51474 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 57 components and 2.51474 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.196950Jy  sigma=1.455008
! Fit after  self-cal, rms=0.196629Jy  sigma=1.451816
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.196629Jy  sigma=1.451816
! Fit after  self-cal, rms=0.112793Jy  sigma=0.846601
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.38 mas, bmaj=11.19 mas, bpa=-18.59 degrees
! Estimated noise=3.86501 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.63805e-05 Jy
! Component: 100  -  total flux cleaned = 0.000547472 Jy
! Component: 150  -  total flux cleaned = 0.000539492 Jy
! Component: 200  -  total flux cleaned = -0.000991924 Jy
! Total flux subtracted in 200 components = -0.000991924 Jy
! Clean residual min=-0.023848 max=0.025836 Jy/beam
! Clean residual mean=0.000040 rms=0.005573 Jy/beam
! Combined flux in latest and established models = 2.51374 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 76 components and 2.51374 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.106528Jy  sigma=0.800888
! Fit after  self-cal, rms=0.106126Jy  sigma=0.799425
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (31, -13.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0152451 Jy
! Component: 100  -  total flux cleaned = 0.0105014 Jy
! Component: 150  -  total flux cleaned = 0.00910356 Jy
! Component: 200  -  total flux cleaned = 0.00869307 Jy
! Total flux subtracted in 200 components = 0.00869307 Jy
! Clean residual min=-0.021322 max=0.019950 Jy/beam
! Clean residual mean=0.000030 rms=0.004710 Jy/beam
! Combined flux in latest and established models = 2.52244 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 104 components and 2.52244 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.099652Jy  sigma=0.749603
! Fit after  self-cal, rms=0.099431Jy  sigma=0.747146
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.099431Jy  sigma=0.747146
! Fit after  self-cal, rms=0.097206Jy  sigma=0.736190
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.378 mas, bmaj=11.18 mas, bpa=-18.62 degrees
! Estimated noise=3.86574 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00421249 Jy
! Component: 100  -  total flux cleaned = 0.00664618 Jy
! Component: 150  -  total flux cleaned = 0.007317 Jy
! Component: 200  -  total flux cleaned = 0.00822774 Jy
! Total flux subtracted in 200 components = 0.00822774 Jy
! Clean residual min=-0.017861 max=0.017556 Jy/beam
! Clean residual mean=0.000027 rms=0.004209 Jy/beam
! Combined flux in latest and established models = 2.53067 Jy
selfcal
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 131 components and 2.53067 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.094271Jy  sigma=0.713922
! Fit after  self-cal, rms=0.094141Jy  sigma=0.713506
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0013922 Jy
! Component: 100  -  total flux cleaned = 0.00113865 Jy
! Component: 150  -  total flux cleaned = 0.00187696 Jy
! Component: 200  -  total flux cleaned = 0.00256475 Jy
! Total flux subtracted in 200 components = 0.00256475 Jy
! Clean residual min=-0.017160 max=0.016945 Jy/beam
! Clean residual mean=0.000025 rms=0.004026 Jy/beam
! Combined flux in latest and established models = 2.53323 Jy
! Performing phase self-cal
! Adding 46 model components to the UV plane model.
! The established model now contains 152 components and 2.53323 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.092887Jy  sigma=0.703721
! Fit after  self-cal, rms=0.092808Jy  sigma=0.703535
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.092808Jy  sigma=0.703535
! Fit after  self-cal, rms=0.091889Jy  sigma=0.699091
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.043 mas, bmaj=11.32 mas, bpa=-14.28 degrees
! Estimated noise=4.73874 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00413053 Jy
! Component: 100  -  total flux cleaned = 0.00713116 Jy
! Component: 150  -  total flux cleaned = 0.0091746 Jy
! Component: 200  -  total flux cleaned = 0.0102809 Jy
! Total flux subtracted in 200 components = 0.0102809 Jy
! Clean residual min=-0.019136 max=0.021957 Jy/beam
! Clean residual mean=0.000043 rms=0.005407 Jy/beam
! Combined flux in latest and established models = 2.54351 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 176 components and 2.54351 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.090825Jy  sigma=0.690829
! Fit after  self-cal, rms=0.090705Jy  sigma=0.690287
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00131945 Jy
! Component: 100  -  total flux cleaned = 0.00226746 Jy
! Component: 150  -  total flux cleaned = 0.00345638 Jy
! Component: 200  -  total flux cleaned = 0.00455779 Jy
! Total flux subtracted in 200 components = 0.00455779 Jy
! Clean residual min=-0.018803 max=0.021266 Jy/beam
! Clean residual mean=0.000039 rms=0.005230 Jy/beam
! Combined flux in latest and established models = 2.54807 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 189 components and 2.54807 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.090278Jy  sigma=0.687739
! Fit after  self-cal, rms=0.090189Jy  sigma=0.687509
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.378 mas, bmaj=11.17 mas, bpa=-18.63 degrees
! Estimated noise=3.86733 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.378 x 11.17 at -18.63 degrees (North through East)
! Clean map  min=-0.014412  max=2.3345 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.090189Jy  sigma=0.687509
! Fit after  self-cal, rms=0.079440Jy  sigma=0.582978
! Inverting map and beam 
! Estimated beam: bmin=3.379 mas, bmaj=11.16 mas, bpa=-18.64 degrees
! Estimated noise=3.86942 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000441815 Jy
! Component: 100  -  total flux cleaned = -0.00106628 Jy
! Component: 150  -  total flux cleaned = -0.00125917 Jy
! Component: 200  -  total flux cleaned = -0.0008965 Jy
! Total flux subtracted in 200 components = -0.0008965 Jy
! Clean residual min=-0.013117 max=0.014373 Jy/beam
! Clean residual mean=0.000020 rms=0.003470 Jy/beam
! Combined flux in latest and established models = 2.54717 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 209 components and 2.54717 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078197Jy  sigma=0.572630
! Fit after  self-cal, rms=0.078057Jy  sigma=0.572356
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000432129 Jy
! Component: 100  -  total flux cleaned = 0.000228371 Jy
! Component: 150  -  total flux cleaned = 0.000537116 Jy
! Component: 200  -  total flux cleaned = 0.000684669 Jy
! Total flux subtracted in 200 components = 0.000684669 Jy
! Clean residual min=-0.012964 max=0.014022 Jy/beam
! Clean residual mean=0.000021 rms=0.003397 Jy/beam
! Combined flux in latest and established models = 2.54786 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 222 components and 2.54786 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077469Jy  sigma=0.567097
! Fit after  self-cal, rms=0.077436Jy  sigma=0.567022
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077436Jy  sigma=0.567022
! Fit after  self-cal, rms=0.076984Jy  sigma=0.564761
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.065 mas, bmaj=11.66 mas, bpa=-17.87 degrees
! Estimated noise=4.42844 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.84779 Jy
! Component: 100  -  total flux cleaned = 2.25085 Jy
! Component: 150  -  total flux cleaned = 2.34973 Jy
! Component: 200  -  total flux cleaned = 2.40311 Jy
! Total flux subtracted in 200 components = 2.40311 Jy
! Clean residual min=-0.030188 max=0.034656 Jy/beam
! Clean residual mean=-0.000029 rms=0.008216 Jy/beam
! Combined flux in latest and established models = 2.40311 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 2.40311 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.378 mas, bmaj=11.15 mas, bpa=-18.64 degrees
! Estimated noise=3.87024 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-72, 82).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0376744 Jy
! Component: 100  -  total flux cleaned = 0.0648715 Jy
! Component: 150  -  total flux cleaned = 0.0822629 Jy
! Component: 200  -  total flux cleaned = 0.0937737 Jy
! Total flux subtracted in 200 components = 0.0937737 Jy
! Clean residual min=-0.018802 max=0.023555 Jy/beam
! Clean residual mean=0.000013 rms=0.004827 Jy/beam
! Combined flux in latest and established models = 2.49688 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 55 components and 2.49688 Jy
! Inverting map 
! Added new window around map position (72.5, -81).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0176971 Jy
! Component: 100  -  total flux cleaned = 0.0278221 Jy
! Component: 150  -  total flux cleaned = 0.0362808 Jy
! Component: 200  -  total flux cleaned = 0.0443259 Jy
! Total flux subtracted in 200 components = 0.0443259 Jy
! Clean residual min=-0.013600 max=0.013983 Jy/beam
! Clean residual mean=0.000007 rms=0.003716 Jy/beam
! Combined flux in latest and established models = 2.54121 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 75 components and 2.5412 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.05 mas, bmaj=11.31 mas, bpa=-14.21 degrees
! Estimated noise=4.74111 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.010563 Jy
! Component: 100  -  total flux cleaned = 0.0172901 Jy
! Component: 150  -  total flux cleaned = 0.0217917 Jy
! Component: 200  -  total flux cleaned = 0.0245889 Jy
! Total flux subtracted in 200 components = 0.0245889 Jy
! Clean residual min=-0.014621 max=0.013371 Jy/beam
! Clean residual mean=0.000024 rms=0.003730 Jy/beam
! Combined flux in latest and established models = 2.56579 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00255636 Jy
! Component: 100  -  total flux cleaned = 0.00513577 Jy
! Component: 150  -  total flux cleaned = 0.00726492 Jy
! Component: 200  -  total flux cleaned = 0.00838403 Jy
! Total flux subtracted in 200 components = 0.00838403 Jy
! Clean residual min=-0.013236 max=0.010992 Jy/beam
! Clean residual mean=0.000021 rms=0.003333 Jy/beam
! Combined flux in latest and established models = 2.57418 Jy
! Adding 74 model components to the UV plane model.
! The established model now contains 149 components and 2.57418 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.378 mas, bmaj=11.15 mas, bpa=-18.64 degrees
! Estimated noise=3.87024 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00260069 Jy
! Component: 100  -  total flux cleaned = 0.0040273 Jy
! Component: 150  -  total flux cleaned = 0.00651843 Jy
! Component: 200  -  total flux cleaned = 0.00877705 Jy
! Total flux subtracted in 200 components = 0.00877705 Jy
! Clean residual min=-0.010725 max=0.011497 Jy/beam
! Clean residual mean=0.000006 rms=0.002882 Jy/beam
! Combined flux in latest and established models = 2.58296 Jy
selfcal
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 180 components and 2.58295 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.073996Jy  sigma=0.555800
! Fit after  self-cal, rms=0.073219Jy  sigma=0.548864
wmodel J0121+1149_S_b_map.mod
! Writing 180 model components to file: J0121+1149_S_b_map.mod
wobs   J0121+1149_S_b_uvs.fits
! Writing UV FITS file: J0121+1149_S_b_uvs.fits
wwins  J0121+1149_S_b_map.win
! wwins: Wrote 5 windows to J0121+1149_S_b_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000516012 Jy
! Component: 100  -  total flux cleaned = 0.000697997 Jy
! Component: 150  -  total flux cleaned = 3.26939e-05 Jy
! Component: 200  -  total flux cleaned = -0.000439481 Jy
! Component: 250  -  total flux cleaned = -0.00165732 Jy
! Component: 300  -  total flux cleaned = -0.0025329 Jy
! Component: 350  -  total flux cleaned = -0.00337453 Jy
! Component: 400  -  total flux cleaned = -0.00404836 Jy
! Component: 450  -  total flux cleaned = -0.00470098 Jy
! Component: 500  -  total flux cleaned = -0.00571417 Jy
! Component: 550  -  total flux cleaned = -0.0065717 Jy
! Component: 600  -  total flux cleaned = -0.00693095 Jy
! Component: 650  -  total flux cleaned = -0.00751391 Jy
! Component: 700  -  total flux cleaned = -0.0077398 Jy
! Component: 750  -  total flux cleaned = -0.00740654 Jy
! Component: 800  -  total flux cleaned = -0.0074102 Jy
! Component: 850  -  total flux cleaned = -0.00741332 Jy
! Component: 900  -  total flux cleaned = -0.00741634 Jy
! Component: 950  -  total flux cleaned = -0.00731277 Jy
! Component: 1000  -  total flux cleaned = -0.0068202 Jy
! Component: 1050  -  total flux cleaned = -0.0065317 Jy
! Component: 1100  -  total flux cleaned = -0.0059718 Jy
! Component: 1150  -  total flux cleaned = -0.00578955 Jy
! Component: 1200  -  total flux cleaned = -0.00561034 Jy
! Component: 1250  -  total flux cleaned = -0.00534207 Jy
! Component: 1300  -  total flux cleaned = -0.00456262 Jy
! Component: 1350  -  total flux cleaned = -0.00430676 Jy
! Component: 1400  -  total flux cleaned = -0.00363663 Jy
! Component: 1450  -  total flux cleaned = -0.00314353 Jy
! Component: 1500  -  total flux cleaned = -0.00282011 Jy
! Component: 1550  -  total flux cleaned = -0.0025033 Jy
! Component: 1600  -  total flux cleaned = -0.00219117 Jy
! Component: 1650  -  total flux cleaned = -0.00195969 Jy
! Component: 1700  -  total flux cleaned = -0.00142717 Jy
! Component: 1750  -  total flux cleaned = -0.00120245 Jy
! Component: 1800  -  total flux cleaned = -0.000684704 Jy
! Component: 1850  -  total flux cleaned = -0.000538888 Jy
! Component: 1900  -  total flux cleaned = -0.00025272 Jy
! Component: 1950  -  total flux cleaned = 0.000101988 Jy
! Component: 2000  -  total flux cleaned = 0.000521172 Jy
! Component: 2050  -  total flux cleaned = 0.000865888 Jy
! Component: 2100  -  total flux cleaned = 0.00106989 Jy
! Component: 2150  -  total flux cleaned = 0.00140618 Jy
! Component: 2200  -  total flux cleaned = 0.00173888 Jy
! Component: 2250  -  total flux cleaned = 0.00233006 Jy
! Component: 2300  -  total flux cleaned = 0.00265464 Jy
! Component: 2350  -  total flux cleaned = 0.00304011 Jy
! Component: 2400  -  total flux cleaned = 0.00329403 Jy
! Component: 2450  -  total flux cleaned = 0.00367067 Jy
! Component: 2500  -  total flux cleaned = 0.00398022 Jy
! Component: 2550  -  total flux cleaned = 0.00404123 Jy
! Component: 2600  -  total flux cleaned = 0.00422419 Jy
! Component: 2650  -  total flux cleaned = 0.00434512 Jy
! Component: 2700  -  total flux cleaned = 0.00452445 Jy
! Component: 2750  -  total flux cleaned = 0.00458394 Jy
! Component: 2800  -  total flux cleaned = 0.00470212 Jy
! Component: 2850  -  total flux cleaned = 0.0051095 Jy
! Component: 2900  -  total flux cleaned = 0.00499393 Jy
! Component: 2950  -  total flux cleaned = 0.00505137 Jy
! Component: 3000  -  total flux cleaned = 0.00510848 Jy
! Component: 3050  -  total flux cleaned = 0.00527716 Jy
! Component: 3100  -  total flux cleaned = 0.00505322 Jy
! Component: 3150  -  total flux cleaned = 0.00488681 Jy
! Component: 3200  -  total flux cleaned = 0.00505267 Jy
! Component: 3250  -  total flux cleaned = 0.00477879 Jy
! Component: 3300  -  total flux cleaned = 0.00488803 Jy
! Component: 3350  -  total flux cleaned = 0.00488818 Jy
! Component: 3400  -  total flux cleaned = 0.00472685 Jy
! Component: 3450  -  total flux cleaned = 0.00462057 Jy
! Component: 3500  -  total flux cleaned = 0.00472667 Jy
! Component: 3550  -  total flux cleaned = 0.00467399 Jy
! Component: 3600  -  total flux cleaned = 0.00456904 Jy
! Component: 3650  -  total flux cleaned = 0.00456936 Jy
! Component: 3700  -  total flux cleaned = 0.00451702 Jy
! Component: 3750  -  total flux cleaned = 0.00425884 Jy
! Component: 3800  -  total flux cleaned = 0.00420705 Jy
! Component: 3850  -  total flux cleaned = 0.0040028 Jy
! Component: 3900  -  total flux cleaned = 0.00379987 Jy
! Component: 3950  -  total flux cleaned = 0.00374962 Jy
! Component: 4000  -  total flux cleaned = 0.00359861 Jy
! Component: 4050  -  total flux cleaned = 0.00339864 Jy
! Total flux subtracted in 4096 components = 0.00339846 Jy
! Clean residual min=-0.002773 max=0.002894 Jy/beam
! Clean residual mean=-0.000001 rms=0.000892 Jy/beam
! Combined flux in latest and established models = 2.58635 Jy
keep
! Adding 277 model components to the UV plane model.
! The established model now contains 457 components and 2.58635 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0121+1149_S_b_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.378 x 11.15 at -18.64 degrees (North through East)
! Clean map  min=-0.0074896  max=2.3425 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0121+1149_S_b_map.fits
wmodel /vlbi/uf001/uva//J0121+1149_S_b_map.mod
! Writing 457 model components to file: /vlbi/uf001/uva//J0121+1149_S_b_map.mod
wobs   /vlbi/uf001/uva//J0121+1149_S_b_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0121+1149_S_b_uvs.fits
wwins  /vlbi/uf001/uva//J0121+1149_S_b_map.win
! wwins: Wrote 6 windows to /vlbi/uf001/uva//J0121+1149_S_b_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 2.34247 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00085967 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.110098 0.110098 0.220195 0.440391 0.880781 1.76156 3.52313 7.04625 14.0925 28.185 56.37
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0025 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       2.342 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  2724.85 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0121+1149_S_b_dfm.log closed on Sun Jan 13 20:56:44 2019