! Started logfile: /vlbi/uf001/uva//J0119+0829_S_dfm.log on Sun Jan 13 20:55:54 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J0119+0829_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0119+0829_S_uva.fits
! AN table 1: 72 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.990741 visibilities/baseline/integration-bin.
! Found source: J0119+0829
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 4494 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0119+0829_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=1.051203Jy  sigma=21.543768
! Fit after  self-cal, rms=0.681192Jy  sigma=14.507170
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.931 mas, bmaj=18.74 mas, bpa=-17.5 degrees
! Estimated noise=0.620118 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.233963 Jy
! Component: 100  -  total flux cleaned = 0.323276 Jy
! Total flux subtracted in 100 components = 0.323276 Jy
! Clean residual min=-0.043116 max=0.067701 Jy/beam
! Clean residual mean=0.000347 rms=0.013558 Jy/beam
! Combined flux in latest and established models = 0.323276 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 0.323276 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.203197Jy  sigma=3.744191
! Fit after  self-cal, rms=0.202959Jy  sigma=3.740187
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.41 mas, bmaj=19.87 mas, bpa=-16.73 degrees
! Estimated noise=0.519317 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0854929 Jy
! Component: 100  -  total flux cleaned = 0.14251 Jy
! Component: 150  -  total flux cleaned = 0.184984 Jy
! Component: 200  -  total flux cleaned = 0.218074 Jy
! Total flux subtracted in 200 components = 0.218074 Jy
! Clean residual min=-0.033014 max=0.065837 Jy/beam
! Clean residual mean=0.000306 rms=0.011543 Jy/beam
! Combined flux in latest and established models = 0.541351 Jy
! Performing phase self-cal
! Adding 52 model components to the UV plane model.
! The established model now contains 73 components and 0.541351 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.141953Jy  sigma=2.728732
! Fit after  self-cal, rms=0.140684Jy  sigma=2.693525
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.41 x 19.87 at -16.73 degrees (North through East)
! Clean map  min=-0.03371  max=0.32212 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     HN        1.15     KP        1.07     LA        0.85     
!   NL        1.09     OV        1.06     PT        0.84     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     HN        1.22     KP        1.03     LA        0.86     
!   NL        1.04     OV        1.01     PT        0.87     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     HN        1.28     KP        1.03     LA        0.87     
!   NL        1.00     OV        1.12     PT        0.87     
! 
! 
! Fit before self-cal, rms=0.140684Jy  sigma=2.693525
! Fit after  self-cal, rms=0.132479Jy  sigma=2.474019
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.735 mas, bmaj=20.26 mas, bpa=-16.9 degrees
! Estimated noise=0.524495 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.5, 31.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0499358 Jy
! Component: 100  -  total flux cleaned = 0.0662028 Jy
! Component: 150  -  total flux cleaned = 0.0726012 Jy
! Component: 200  -  total flux cleaned = 0.0770137 Jy
! Total flux subtracted in 200 components = 0.0770137 Jy
! Clean residual min=-0.021193 max=0.025864 Jy/beam
! Clean residual mean=0.000079 rms=0.006694 Jy/beam
! Combined flux in latest and established models = 0.618364 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 107 components and 0.618365 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.101618Jy  sigma=1.892956
! Fit after  self-cal, rms=0.100153Jy  sigma=1.860349
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.100153Jy  sigma=1.860349
! Fit after  self-cal, rms=0.092405Jy  sigma=1.777467
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.773 mas, bmaj=20.27 mas, bpa=-17.14 degrees
! Estimated noise=0.51591 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00812056 Jy
! Component: 100  -  total flux cleaned = 0.00862429 Jy
! Component: 150  -  total flux cleaned = 0.00910186 Jy
! Component: 200  -  total flux cleaned = 0.010746 Jy
! Total flux subtracted in 200 components = 0.010746 Jy
! Clean residual min=-0.016591 max=0.020880 Jy/beam
! Clean residual mean=0.000064 rms=0.005531 Jy/beam
! Combined flux in latest and established models = 0.629111 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 126 components and 0.629111 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.085758Jy  sigma=1.663608
! Fit after  self-cal, rms=0.085618Jy  sigma=1.658320
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00198602 Jy
! Component: 100  -  total flux cleaned = 0.00126935 Jy
! Component: 150  -  total flux cleaned = 0.000607494 Jy
! Component: 200  -  total flux cleaned = 0.00150932 Jy
! Total flux subtracted in 200 components = 0.00150932 Jy
! Clean residual min=-0.015895 max=0.019816 Jy/beam
! Clean residual mean=0.000060 rms=0.005214 Jy/beam
! Combined flux in latest and established models = 0.63062 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 151 components and 0.63062 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082766Jy  sigma=1.611056
! Fit after  self-cal, rms=0.082803Jy  sigma=1.609422
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082803Jy  sigma=1.609422
! Fit after  self-cal, rms=0.081469Jy  sigma=1.594372
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.798 mas, bmaj=20.26 mas, bpa=-17.32 degrees
! Estimated noise=0.514877 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000632317 Jy
! Component: 100  -  total flux cleaned = 0.0030551 Jy
! Component: 150  -  total flux cleaned = 0.00389149 Jy
! Component: 200  -  total flux cleaned = 0.00465238 Jy
! Total flux subtracted in 200 components = 0.00465238 Jy
! Clean residual min=-0.014900 max=0.018526 Jy/beam
! Clean residual mean=0.000065 rms=0.004939 Jy/beam
! Combined flux in latest and established models = 0.635272 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 171 components and 0.635272 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.079345Jy  sigma=1.557750
! Fit after  self-cal, rms=0.079371Jy  sigma=1.556261
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00134906 Jy
! Component: 100  -  total flux cleaned = 0.000894609 Jy
! Component: 150  -  total flux cleaned = 0.000258344 Jy
! Component: 200  -  total flux cleaned = -0.000144423 Jy
! Total flux subtracted in 200 components = -0.000144423 Jy
! Clean residual min=-0.014740 max=0.018092 Jy/beam
! Clean residual mean=0.000065 rms=0.004800 Jy/beam
! Combined flux in latest and established models = 0.635128 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 186 components and 0.635128 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078126Jy  sigma=1.535815
! Fit after  self-cal, rms=0.078179Jy  sigma=1.535012
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078179Jy  sigma=1.535012
! Fit after  self-cal, rms=0.077564Jy  sigma=1.530573
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.127 mas, bmaj=20.16 mas, bpa=-18.43 degrees
! Estimated noise=0.545353 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00721938 Jy
! Component: 100  -  total flux cleaned = 0.00929828 Jy
! Component: 150  -  total flux cleaned = 0.0104081 Jy
! Component: 200  -  total flux cleaned = 0.0108156 Jy
! Total flux subtracted in 200 components = 0.0108156 Jy
! Clean residual min=-0.016294 max=0.020062 Jy/beam
! Clean residual mean=0.000081 rms=0.005138 Jy/beam
! Combined flux in latest and established models = 0.645944 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 207 components and 0.645944 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076849Jy  sigma=1.514699
! Fit after  self-cal, rms=0.076754Jy  sigma=1.513508
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000476633 Jy
! Component: 100  -  total flux cleaned = -3.96781e-05 Jy
! Component: 150  -  total flux cleaned = -0.000197681 Jy
! Component: 200  -  total flux cleaned = -4.87551e-05 Jy
! Total flux subtracted in 200 components = -4.87551e-05 Jy
! Clean residual min=-0.016299 max=0.019808 Jy/beam
! Clean residual mean=0.000079 rms=0.005056 Jy/beam
! Combined flux in latest and established models = 0.645895 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 223 components and 0.645895 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076353Jy  sigma=1.505849
! Fit after  self-cal, rms=0.076288Jy  sigma=1.505247
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=5.813 mas, bmaj=20.24 mas, bpa=-17.41 degrees
! Estimated noise=0.513138 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.813 x 20.24 at -17.41 degrees (North through East)
! Clean map  min=-0.028281  max=0.3121 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.244 mas, bmaj=19.08 mas, bpa=-18.29 degrees
! Estimated noise=0.63058 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.234675 Jy
! Component: 100  -  total flux cleaned = 0.324248 Jy
! Component: 150  -  total flux cleaned = 0.390234 Jy
! Component: 200  -  total flux cleaned = 0.434937 Jy
! Total flux subtracted in 200 components = 0.434937 Jy
! Clean residual min=-0.030000 max=0.035509 Jy/beam
! Clean residual mean=0.000215 rms=0.009475 Jy/beam
! Combined flux in latest and established models = 0.434937 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 35 model components to the UV plane model.
! The established model now contains 35 components and 0.434937 Jy
! Inverting map and beam 
! Estimated beam: bmin=5.813 mas, bmaj=20.24 mas, bpa=-17.41 degrees
! Estimated noise=0.513138 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.050005 Jy
! Component: 100  -  total flux cleaned = 0.0728337 Jy
! Component: 150  -  total flux cleaned = 0.0920446 Jy
! Component: 200  -  total flux cleaned = 0.111629 Jy
! Total flux subtracted in 200 components = 0.111629 Jy
! Clean residual min=-0.024861 max=0.024252 Jy/beam
! Clean residual mean=0.000194 rms=0.007176 Jy/beam
! Combined flux in latest and established models = 0.546566 Jy
! Adding 49 model components to the UV plane model.
! The established model now contains 82 components and 0.546566 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.127 mas, bmaj=20.16 mas, bpa=-18.43 degrees
! Estimated noise=0.545353 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0275556 Jy
! Component: 100  -  total flux cleaned = 0.0430282 Jy
! Component: 150  -  total flux cleaned = 0.0531897 Jy
! Component: 200  -  total flux cleaned = 0.0595602 Jy
! Total flux subtracted in 200 components = 0.0595602 Jy
! Clean residual min=-0.021730 max=0.022571 Jy/beam
! Clean residual mean=0.000172 rms=0.006526 Jy/beam
! Combined flux in latest and established models = 0.606126 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00452444 Jy
! Component: 100  -  total flux cleaned = 0.00810894 Jy
! Component: 150  -  total flux cleaned = 0.0113621 Jy
! Component: 200  -  total flux cleaned = 0.0134962 Jy
! Total flux subtracted in 200 components = 0.0134962 Jy
! Clean residual min=-0.018669 max=0.021071 Jy/beam
! Clean residual mean=0.000136 rms=0.005810 Jy/beam
! Combined flux in latest and established models = 0.619622 Jy
! Adding 96 model components to the UV plane model.
! The established model now contains 172 components and 0.619622 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=5.813 mas, bmaj=20.24 mas, bpa=-17.41 degrees
! Estimated noise=0.513138 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00275734 Jy
! Component: 100  -  total flux cleaned = 0.00608859 Jy
! Component: 150  -  total flux cleaned = 0.00902276 Jy
! Component: 200  -  total flux cleaned = 0.010004 Jy
! Total flux subtracted in 200 components = 0.010004 Jy
! Clean residual min=-0.015032 max=0.020001 Jy/beam
! Clean residual mean=0.000075 rms=0.004930 Jy/beam
! Combined flux in latest and established models = 0.629626 Jy
selfcal
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 207 components and 0.629626 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.080102Jy  sigma=1.571588
! Fit after  self-cal, rms=0.079668Jy  sigma=1.564039
wmodel J0119+0829_S_map.mod
! Writing 207 model components to file: J0119+0829_S_map.mod
wobs   J0119+0829_S_uvs.fits
! Writing UV FITS file: J0119+0829_S_uvs.fits
wwins  J0119+0829_S_map.win
! wwins: Wrote 2 windows to J0119+0829_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00859366 Jy
! Component: 100  -  total flux cleaned = 0.0159073 Jy
! Component: 150  -  total flux cleaned = 0.0212302 Jy
! Component: 200  -  total flux cleaned = 0.0244289 Jy
! Component: 250  -  total flux cleaned = 0.0272028 Jy
! Component: 300  -  total flux cleaned = 0.0298282 Jy
! Component: 350  -  total flux cleaned = 0.0325345 Jy
! Component: 400  -  total flux cleaned = 0.0351205 Jy
! Component: 450  -  total flux cleaned = 0.0375947 Jy
! Component: 500  -  total flux cleaned = 0.0394179 Jy
! Component: 550  -  total flux cleaned = 0.0408203 Jy
! Component: 600  -  total flux cleaned = 0.0416654 Jy
! Component: 650  -  total flux cleaned = 0.0426454 Jy
! Component: 700  -  total flux cleaned = 0.0429657 Jy
! Component: 750  -  total flux cleaned = 0.0434261 Jy
! Component: 800  -  total flux cleaned = 0.0441663 Jy
! Component: 850  -  total flux cleaned = 0.044455 Jy
! Component: 900  -  total flux cleaned = 0.044459 Jy
! Component: 950  -  total flux cleaned = 0.044601 Jy
! Component: 1000  -  total flux cleaned = 0.0444678 Jy
! Component: 1050  -  total flux cleaned = 0.0442117 Jy
! Component: 1100  -  total flux cleaned = 0.0442137 Jy
! Component: 1150  -  total flux cleaned = 0.0439682 Jy
! Component: 1200  -  total flux cleaned = 0.0442066 Jy
! Component: 1250  -  total flux cleaned = 0.044203 Jy
! Component: 1300  -  total flux cleaned = 0.0444273 Jy
! Component: 1350  -  total flux cleaned = 0.044428 Jy
! Component: 1400  -  total flux cleaned = 0.0446475 Jy
! Component: 1450  -  total flux cleaned = 0.0446461 Jy
! Component: 1500  -  total flux cleaned = 0.0446486 Jy
! Component: 1550  -  total flux cleaned = 0.0447507 Jy
! Component: 1600  -  total flux cleaned = 0.0446527 Jy
! Component: 1650  -  total flux cleaned = 0.0449461 Jy
! Component: 1700  -  total flux cleaned = 0.044658 Jy
! Component: 1750  -  total flux cleaned = 0.0448454 Jy
! Component: 1800  -  total flux cleaned = 0.0446593 Jy
! Component: 1850  -  total flux cleaned = 0.0446582 Jy
! Component: 1900  -  total flux cleaned = 0.0446596 Jy
! Component: 1950  -  total flux cleaned = 0.0444851 Jy
! Component: 2000  -  total flux cleaned = 0.0443983 Jy
! Component: 2050  -  total flux cleaned = 0.0439809 Jy
! Component: 2100  -  total flux cleaned = 0.043901 Jy
! Component: 2150  -  total flux cleaned = 0.0438184 Jy
! Component: 2200  -  total flux cleaned = 0.0437391 Jy
! Component: 2250  -  total flux cleaned = 0.0435068 Jy
! Component: 2300  -  total flux cleaned = 0.0432031 Jy
! Component: 2350  -  total flux cleaned = 0.0434272 Jy
! Component: 2400  -  total flux cleaned = 0.0432065 Jy
! Component: 2450  -  total flux cleaned = 0.0433515 Jy
! Component: 2500  -  total flux cleaned = 0.0432094 Jy
! Component: 2550  -  total flux cleaned = 0.0432089 Jy
! Component: 2600  -  total flux cleaned = 0.0433439 Jy
! Component: 2650  -  total flux cleaned = 0.0430057 Jy
! Component: 2700  -  total flux cleaned = 0.0431397 Jy
! Component: 2750  -  total flux cleaned = 0.0431385 Jy
! Component: 2800  -  total flux cleaned = 0.0431391 Jy
! Component: 2850  -  total flux cleaned = 0.0431383 Jy
! Component: 2900  -  total flux cleaned = 0.0429508 Jy
! Component: 2950  -  total flux cleaned = 0.0429506 Jy
! Component: 3000  -  total flux cleaned = 0.0428904 Jy
! Component: 3050  -  total flux cleaned = 0.0427703 Jy
! Component: 3100  -  total flux cleaned = 0.0426541 Jy
! Component: 3150  -  total flux cleaned = 0.0425961 Jy
! Component: 3200  -  total flux cleaned = 0.0424814 Jy
! Component: 3250  -  total flux cleaned = 0.0424246 Jy
! Component: 3300  -  total flux cleaned = 0.0424245 Jy
! Component: 3350  -  total flux cleaned = 0.0424238 Jy
! Component: 3400  -  total flux cleaned = 0.0422093 Jy
! Component: 3450  -  total flux cleaned = 0.0422623 Jy
! Component: 3500  -  total flux cleaned = 0.0422623 Jy
! Component: 3550  -  total flux cleaned = 0.0421591 Jy
! Component: 3600  -  total flux cleaned = 0.0421081 Jy
! Component: 3650  -  total flux cleaned = 0.0420074 Jy
! Component: 3700  -  total flux cleaned = 0.0420566 Jy
! Component: 3750  -  total flux cleaned = 0.0418116 Jy
! Component: 3800  -  total flux cleaned = 0.0418605 Jy
! Component: 3850  -  total flux cleaned = 0.0416697 Jy
! Component: 3900  -  total flux cleaned = 0.0417647 Jy
! Component: 3950  -  total flux cleaned = 0.0417642 Jy
! Component: 4000  -  total flux cleaned = 0.0416252 Jy
! Component: 4050  -  total flux cleaned = 0.0415795 Jy
! Total flux subtracted in 4096 components = 0.041534 Jy
! Clean residual min=-0.002566 max=0.002430 Jy/beam
! Clean residual mean=0.000013 rms=0.000997 Jy/beam
! Combined flux in latest and established models = 0.67116 Jy
keep
! Adding 385 model components to the UV plane model.
! The established model now contains 592 components and 0.671161 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0119+0829_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.813 x 20.24 at -17.41 degrees (North through East)
! Clean map  min=-0.020611  max=0.32122 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0119+0829_S_map.fits
wmodel /vlbi/uf001/uva//J0119+0829_S_map.mod
! Writing 592 model components to file: /vlbi/uf001/uva//J0119+0829_S_map.mod
wobs   /vlbi/uf001/uva//J0119+0829_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0119+0829_S_uvs.fits
wwins  /vlbi/uf001/uva//J0119+0829_S_map.win
! wwins: Wrote 3 windows to /vlbi/uf001/uva//J0119+0829_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.321223 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000972037 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.907816 0.907816 1.81563 3.63126 7.26253 14.5251 29.0501 58.1002
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0029 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.321 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  330.463 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0119+0829_S_dfm.log closed on Sun Jan 13 20:55:58 2019