! Started logfile: /vlbi/uf001/uva//J0116-2052_S_dfm.log on Sun Jan 13 20:55:43 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /vlbi/uf001/uva//J0116-2052_S_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J0116-2052_S_uva.fits ! AN table 1: 72 integrations on 28 of 28 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J0116-2052 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 6048 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0116-2052_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=1.083309Jy sigma=16.851639 ! Fit after self-cal, rms=0.880153Jy sigma=14.459385 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.163 mas, bmaj=6.237 mas, bpa=-6.982 degrees ! Estimated noise=0.785776 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0960678 Jy ! Component: 100 - total flux cleaned = 0.158726 Jy ! Total flux subtracted in 100 components = 0.158726 Jy ! Clean residual min=-0.029097 max=0.052029 Jy/beam ! Clean residual mean=-0.000159 rms=0.010675 Jy/beam ! Combined flux in latest and established models = 0.158726 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 0.158726 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.310077Jy sigma=3.557755 ! Fit after self-cal, rms=0.308674Jy sigma=3.528423 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.574 mas, bmaj=6.914 mas, bpa=-5.739 degrees ! Estimated noise=0.579536 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0947007 Jy ! Component: 100 - total flux cleaned = 0.158741 Jy ! Component: 150 - total flux cleaned = 0.203443 Jy ! Component: 200 - total flux cleaned = 0.234945 Jy ! Total flux subtracted in 200 components = 0.234945 Jy ! Clean residual min=-0.050601 max=0.072578 Jy/beam ! Clean residual mean=0.000055 rms=0.015772 Jy/beam ! Combined flux in latest and established models = 0.393671 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 61 components and 0.393671 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.252677Jy sigma=2.906132 ! Fit after self-cal, rms=0.251334Jy sigma=2.872099 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.574 x 6.914 at -5.739 degrees (North through East) ! Clean map min=-0.04979 max=0.13356 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.81 HN 1.97 KP 0.68 MK 2.16 ! NL 2.65 OV 0.81 PT 0.84 SC 1.42 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 HN 1.61 KP 0.62 MK 1.78 ! NL 2.53 OV 0.92 PT 0.80 SC 1.33 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 HN 1.39 KP 0.58 MK 2.03 ! NL 2.21 OV 0.97 PT 0.87 SC 1.12 ! ! ! Fit before self-cal, rms=0.251334Jy sigma=2.872099 ! Fit after self-cal, rms=0.262485Jy sigma=2.240214 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.981 mas, bmaj=7.701 mas, bpa=0.03297 degrees ! Estimated noise=0.747001 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0130816 Jy ! Component: 100 - total flux cleaned = 0.0188037 Jy ! Component: 150 - total flux cleaned = 0.0194575 Jy ! Component: 200 - total flux cleaned = 0.0202592 Jy ! Total flux subtracted in 200 components = 0.0202592 Jy ! Clean residual min=-0.043247 max=0.045092 Jy/beam ! Clean residual mean=0.000200 rms=0.014025 Jy/beam ! Combined flux in latest and established models = 0.413931 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 64 components and 0.413931 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.260263Jy sigma=2.242786 ! Fit after self-cal, rms=0.264643Jy sigma=2.226968 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.264643Jy sigma=2.226968 ! Fit after self-cal, rms=0.311927Jy sigma=2.101166 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.999 mas, bmaj=7.791 mas, bpa=2.903 degrees ! Estimated noise=0.845513 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0269892 Jy ! Component: 100 - total flux cleaned = 0.0402666 Jy ! Component: 150 - total flux cleaned = 0.0464989 Jy ! Component: 200 - total flux cleaned = 0.0472185 Jy ! Total flux subtracted in 200 components = 0.0472185 Jy ! Clean residual min=-0.042056 max=0.045930 Jy/beam ! Clean residual mean=0.000160 rms=0.014010 Jy/beam ! Combined flux in latest and established models = 0.461149 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 70 components and 0.461149 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.306833Jy sigma=2.083819 ! Fit after self-cal, rms=0.307074Jy sigma=2.081037 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00315364 Jy ! Component: 100 - total flux cleaned = 0.00356319 Jy ! Component: 150 - total flux cleaned = 0.00409791 Jy ! Component: 200 - total flux cleaned = 0.00441619 Jy ! Total flux subtracted in 200 components = 0.00441619 Jy ! Clean residual min=-0.041317 max=0.046989 Jy/beam ! Clean residual mean=0.000164 rms=0.013993 Jy/beam ! Combined flux in latest and established models = 0.465566 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 72 components and 0.465566 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.306415Jy sigma=2.081948 ! Fit after self-cal, rms=0.306292Jy sigma=2.081395 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.306292Jy sigma=2.081395 ! Fit after self-cal, rms=0.341703Jy sigma=1.948850 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.032 mas, bmaj=7.814 mas, bpa=5.447 degrees ! Estimated noise=0.861791 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00944834 Jy ! Component: 100 - total flux cleaned = 0.0119573 Jy ! Component: 150 - total flux cleaned = 0.0127146 Jy ! Component: 200 - total flux cleaned = 0.0130747 Jy ! Total flux subtracted in 200 components = 0.0130747 Jy ! Clean residual min=-0.045792 max=0.048914 Jy/beam ! Clean residual mean=0.000178 rms=0.013211 Jy/beam ! Combined flux in latest and established models = 0.47864 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 73 components and 0.47864 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.340766Jy sigma=1.947309 ! Fit after self-cal, rms=0.341524Jy sigma=1.945545 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00107164 Jy ! Component: 100 - total flux cleaned = 0.00173979 Jy ! Component: 150 - total flux cleaned = 0.00219586 Jy ! Component: 200 - total flux cleaned = 0.00262133 Jy ! Total flux subtracted in 200 components = 0.00262133 Jy ! Clean residual min=-0.045486 max=0.048626 Jy/beam ! Clean residual mean=0.000178 rms=0.013181 Jy/beam ! Combined flux in latest and established models = 0.481262 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 77 components and 0.481262 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.341248Jy sigma=1.943755 ! Fit after self-cal, rms=0.341105Jy sigma=1.943461 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.341105Jy sigma=1.943461 ! Fit after self-cal, rms=0.361948Jy sigma=1.939670 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.575 mas, bmaj=15.23 mas, bpa=1.712 degrees ! Estimated noise=1.01344 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0225752 Jy ! Component: 100 - total flux cleaned = 0.0283383 Jy ! Component: 150 - total flux cleaned = 0.0292332 Jy ! Component: 200 - total flux cleaned = 0.0300476 Jy ! Total flux subtracted in 200 components = 0.0300476 Jy ! Clean residual min=-0.091167 max=0.090261 Jy/beam ! Clean residual mean=0.000359 rms=0.026897 Jy/beam ! Combined flux in latest and established models = 0.511309 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 80 components and 0.511309 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.361814Jy sigma=1.953094 ! Fit after self-cal, rms=0.361896Jy sigma=1.946867 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000621874 Jy ! Component: 100 - total flux cleaned = 0.00122948 Jy ! Component: 150 - total flux cleaned = 0.00207891 Jy ! Component: 200 - total flux cleaned = 0.00287466 Jy ! Total flux subtracted in 200 components = 0.00287466 Jy ! Clean residual min=-0.090355 max=0.089822 Jy/beam ! Clean residual mean=0.000352 rms=0.026738 Jy/beam ! Combined flux in latest and established models = 0.514184 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 80 components and 0.514184 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.362413Jy sigma=1.954998 ! Fit after self-cal, rms=0.362956Jy sigma=1.950875 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.021 mas, bmaj=7.766 mas, bpa=6.186 degrees ! Estimated noise=0.866623 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.021 x 7.766 at 6.186 degrees (North through East) ! Clean map min=-0.04622 max=0.1748 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.591 mas, bmaj=6.637 mas, bpa=4.689 degrees ! Estimated noise=1.33583 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.15726 Jy ! Component: 100 - total flux cleaned = 0.248517 Jy ! Component: 150 - total flux cleaned = 0.308747 Jy ! Component: 200 - total flux cleaned = 0.348928 Jy ! Total flux subtracted in 200 components = 0.348928 Jy ! Clean residual min=-0.036139 max=0.033586 Jy/beam ! Clean residual mean=0.000095 rms=0.009623 Jy/beam ! Combined flux in latest and established models = 0.348928 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 38 model components to the UV plane model. ! The established model now contains 38 components and 0.348928 Jy ! Inverting map and beam ! Estimated beam: bmin=3.021 mas, bmaj=7.766 mas, bpa=6.186 degrees ! Estimated noise=0.866623 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0587858 Jy ! Component: 100 - total flux cleaned = 0.0936882 Jy ! Component: 150 - total flux cleaned = 0.115102 Jy ! Component: 200 - total flux cleaned = 0.12829 Jy ! Total flux subtracted in 200 components = 0.12829 Jy ! Clean residual min=-0.049321 max=0.048446 Jy/beam ! Clean residual mean=0.000165 rms=0.013366 Jy/beam ! Combined flux in latest and established models = 0.477218 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 52 components and 0.477218 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.575 mas, bmaj=15.23 mas, bpa=1.712 degrees ! Estimated noise=1.01344 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.024694 Jy ! Component: 100 - total flux cleaned = 0.031485 Jy ! Component: 150 - total flux cleaned = 0.0323749 Jy ! Component: 200 - total flux cleaned = 0.0331866 Jy ! Total flux subtracted in 200 components = 0.0331866 Jy ! Clean residual min=-0.090975 max=0.089230 Jy/beam ! Clean residual mean=0.000344 rms=0.026743 Jy/beam ! Combined flux in latest and established models = 0.510405 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000752136 Jy ! Component: 100 - total flux cleaned = 0.00122399 Jy ! Component: 150 - total flux cleaned = 0.00166874 Jy ! Component: 200 - total flux cleaned = 0.00209926 Jy ! Total flux subtracted in 200 components = 0.00209926 Jy ! Clean residual min=-0.090657 max=0.088803 Jy/beam ! Clean residual mean=0.000338 rms=0.026628 Jy/beam ! Combined flux in latest and established models = 0.512504 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 59 components and 0.512504 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.021 mas, bmaj=7.766 mas, bpa=6.186 degrees ! Estimated noise=0.866623 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0180922 Jy ! Component: 100 - total flux cleaned = -0.0181204 Jy ! Component: 150 - total flux cleaned = -0.0176005 Jy ! Component: 200 - total flux cleaned = -0.0171453 Jy ! Total flux subtracted in 200 components = -0.0171453 Jy ! Clean residual min=-0.047899 max=0.048766 Jy/beam ! Clean residual mean=0.000163 rms=0.013116 Jy/beam ! Combined flux in latest and established models = 0.495358 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 69 components and 0.495358 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.364125Jy sigma=1.945585 ! Fit after self-cal, rms=0.363100Jy sigma=1.942624 wmodel J0116-2052_S_map.mod ! Writing 69 model components to file: J0116-2052_S_map.mod wobs J0116-2052_S_uvs.fits ! Writing UV FITS file: J0116-2052_S_uvs.fits wwins J0116-2052_S_map.win ! wwins: Wrote 1 windows to J0116-2052_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.003535 Jy ! Component: 100 - total flux cleaned = 0.00657924 Jy ! Component: 150 - total flux cleaned = 0.0100785 Jy ! Component: 200 - total flux cleaned = 0.0126858 Jy ! Component: 250 - total flux cleaned = 0.0144883 Jy ! Component: 300 - total flux cleaned = 0.0172904 Jy ! Component: 350 - total flux cleaned = 0.0204407 Jy ! Component: 400 - total flux cleaned = 0.0224401 Jy ! Component: 450 - total flux cleaned = 0.0248234 Jy ! Component: 500 - total flux cleaned = 0.0257211 Jy ! Component: 550 - total flux cleaned = 0.0270222 Jy ! Component: 600 - total flux cleaned = 0.0291235 Jy ! Component: 650 - total flux cleaned = 0.0315425 Jy ! Component: 700 - total flux cleaned = 0.0330923 Jy ! Component: 750 - total flux cleaned = 0.0353309 Jy ! Component: 800 - total flux cleaned = 0.0371231 Jy ! Component: 850 - total flux cleaned = 0.0378116 Jy ! Component: 900 - total flux cleaned = 0.0384976 Jy ! Component: 950 - total flux cleaned = 0.0391658 Jy ! Component: 1000 - total flux cleaned = 0.0394916 Jy ! Component: 1050 - total flux cleaned = 0.0404326 Jy ! Component: 1100 - total flux cleaned = 0.0413368 Jy ! Component: 1150 - total flux cleaned = 0.0425096 Jy ! Component: 1200 - total flux cleaned = 0.0439301 Jy ! Component: 1250 - total flux cleaned = 0.0436505 Jy ! Component: 1300 - total flux cleaned = 0.0447427 Jy ! Component: 1350 - total flux cleaned = 0.0455429 Jy ! Component: 1400 - total flux cleaned = 0.0465808 Jy ! Component: 1450 - total flux cleaned = 0.0470899 Jy ! Component: 1500 - total flux cleaned = 0.0473362 Jy ! Component: 1550 - total flux cleaned = 0.0483155 Jy ! Component: 1600 - total flux cleaned = 0.0487954 Jy ! Component: 1650 - total flux cleaned = 0.0490306 Jy ! Component: 1700 - total flux cleaned = 0.0492657 Jy ! Component: 1750 - total flux cleaned = 0.0497236 Jy ! Component: 1800 - total flux cleaned = 0.0503912 Jy ! Component: 1850 - total flux cleaned = 0.0506126 Jy ! Component: 1900 - total flux cleaned = 0.0510417 Jy ! Component: 1950 - total flux cleaned = 0.0522995 Jy ! Component: 2000 - total flux cleaned = 0.0527082 Jy ! Component: 2050 - total flux cleaned = 0.0539206 Jy ! Component: 2100 - total flux cleaned = 0.0543179 Jy ! Component: 2150 - total flux cleaned = 0.0554951 Jy ! Component: 2200 - total flux cleaned = 0.0564566 Jy ! Component: 2250 - total flux cleaned = 0.0568398 Jy ! Component: 2300 - total flux cleaned = 0.0579595 Jy ! Component: 2350 - total flux cleaned = 0.0592447 Jy ! Component: 2400 - total flux cleaned = 0.059784 Jy ! Component: 2450 - total flux cleaned = 0.0594312 Jy ! Component: 2500 - total flux cleaned = 0.0599573 Jy ! Component: 2550 - total flux cleaned = 0.0597873 Jy ! Component: 2600 - total flux cleaned = 0.0604714 Jy ! Component: 2650 - total flux cleaned = 0.0606377 Jy ! Component: 2700 - total flux cleaned = 0.0606383 Jy ! Component: 2750 - total flux cleaned = 0.0608033 Jy ! Component: 2800 - total flux cleaned = 0.0611252 Jy ! Component: 2850 - total flux cleaned = 0.0611245 Jy ! Component: 2900 - total flux cleaned = 0.0617534 Jy ! Component: 2950 - total flux cleaned = 0.0615982 Jy ! Component: 3000 - total flux cleaned = 0.0614458 Jy ! Component: 3050 - total flux cleaned = 0.0619006 Jy ! Component: 3100 - total flux cleaned = 0.0619011 Jy ! Component: 3150 - total flux cleaned = 0.0620496 Jy ! Component: 3200 - total flux cleaned = 0.0626328 Jy ! Component: 3250 - total flux cleaned = 0.0626333 Jy ! Component: 3300 - total flux cleaned = 0.0629175 Jy ! Component: 3350 - total flux cleaned = 0.0630548 Jy ! Component: 3400 - total flux cleaned = 0.0629137 Jy ! Component: 3450 - total flux cleaned = 0.0630521 Jy ! Component: 3500 - total flux cleaned = 0.0634637 Jy ! Component: 3550 - total flux cleaned = 0.063193 Jy ! Component: 3600 - total flux cleaned = 0.0633271 Jy ! Component: 3650 - total flux cleaned = 0.0638596 Jy ! Component: 3700 - total flux cleaned = 0.0639925 Jy ! Component: 3750 - total flux cleaned = 0.0642524 Jy ! Component: 3800 - total flux cleaned = 0.0642507 Jy ! Component: 3850 - total flux cleaned = 0.0643779 Jy ! Component: 3900 - total flux cleaned = 0.0645051 Jy ! Component: 3950 - total flux cleaned = 0.0650101 Jy ! Component: 4000 - total flux cleaned = 0.0650093 Jy ! Component: 4050 - total flux cleaned = 0.0650092 Jy ! Total flux subtracted in 4096 components = 0.0650095 Jy ! Clean residual min=-0.006756 max=0.006998 Jy/beam ! Clean residual mean=-0.000001 rms=0.002552 Jy/beam ! Combined flux in latest and established models = 0.560368 Jy keep ! Adding 549 model components to the UV plane model. ! The established model now contains 618 components and 0.560368 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J0116-2052_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.021 x 7.766 at 6.186 degrees (North through East) ! Clean map min=-0.024563 max=0.1833 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J0116-2052_S_map.fits wmodel /vlbi/uf001/uva//J0116-2052_S_map.mod ! Writing 618 model components to file: /vlbi/uf001/uva//J0116-2052_S_map.mod wobs /vlbi/uf001/uva//J0116-2052_S_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J0116-2052_S_uvs.fits wwins /vlbi/uf001/uva//J0116-2052_S_map.win ! wwins: Wrote 2 windows to /vlbi/uf001/uva//J0116-2052_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.183296 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00250555 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -4.10084 4.10084 8.20167 16.4033 32.8067 65.6134 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0075 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.183 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 73.155 quit ! Quitting program ! Log file /vlbi/uf001/uva//J0116-2052_S_dfm.log closed on Sun Jan 13 20:55:47 2019