! Started logfile: /vlbi/uf001/uva//J0116+2422_S_dfm.log on Sun Jan 13 20:55:20 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /vlbi/uf001/uva//J0116+2422_S_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J0116+2422_S_uva.fits ! AN table 1: 87 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.851341 visibilities/baseline/integration-bin. ! Found source: J0116+2422 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 9999 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0116+2422_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 93 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 93 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 93 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.013996Jy sigma=21.965043 ! Fit after self-cal, rms=0.825403Jy sigma=17.878092 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.808 mas, bmaj=6.095 mas, bpa=-2.024 degrees ! Estimated noise=0.530689 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.136331 Jy ! Component: 100 - total flux cleaned = 0.166526 Jy ! Total flux subtracted in 100 components = 0.166526 Jy ! Clean residual min=-0.006712 max=0.009974 Jy/beam ! Clean residual mean=-0.000017 rms=0.001943 Jy/beam ! Combined flux in latest and established models = 0.166526 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.166526 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.066963Jy sigma=1.411164 ! Fit after self-cal, rms=0.066950Jy sigma=1.411038 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.417 mas, bmaj=6.943 mas, bpa=-2.301 degrees ! Estimated noise=0.337599 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0121688 Jy ! Component: 100 - total flux cleaned = 0.0189213 Jy ! Component: 150 - total flux cleaned = 0.0231449 Jy ! Component: 200 - total flux cleaned = 0.0258514 Jy ! Total flux subtracted in 200 components = 0.0258514 Jy ! Clean residual min=-0.006290 max=0.007980 Jy/beam ! Clean residual mean=-0.000007 rms=0.001749 Jy/beam ! Combined flux in latest and established models = 0.192377 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 26 components and 0.192377 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.064776Jy sigma=1.359652 ! Fit after self-cal, rms=0.064776Jy sigma=1.359459 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.417 x 6.943 at -2.301 degrees (North through East) ! Clean map min=-0.0061596 max=0.17499 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.24 FD 0.96 HN 0.94 KP 1.00 ! LA 0.95 MK 1.02 NL 1.05 OV 0.95 ! PT 0.97 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.46 FD 0.93 HN 0.91 KP 0.99 ! LA 0.95 MK 1.03 NL 1.13 OV 0.94 ! PT 0.96 SC 0.93 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 FD 0.92 HN 0.92 KP 0.99 ! LA 0.94 MK 1.02 NL 1.10 OV 0.92 ! PT 0.95 SC 0.94 ! ! ! Fit before self-cal, rms=0.064776Jy sigma=1.359459 ! Fit after self-cal, rms=0.064573Jy sigma=1.266627 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.4 mas, bmaj=7.072 mas, bpa=-1.957 degrees ! Estimated noise=0.33798 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00122811 Jy ! Component: 100 - total flux cleaned = -0.00140758 Jy ! Component: 150 - total flux cleaned = -0.00156325 Jy ! Component: 200 - total flux cleaned = -0.00184848 Jy ! Total flux subtracted in 200 components = -0.00184848 Jy ! Clean residual min=-0.003887 max=0.004267 Jy/beam ! Clean residual mean=-0.000002 rms=0.001124 Jy/beam ! Combined flux in latest and established models = 0.190529 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 37 components and 0.190529 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.064299Jy sigma=1.262009 ! Fit after self-cal, rms=0.064361Jy sigma=1.261435 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.064361Jy sigma=1.261435 ! Fit after self-cal, rms=0.062067Jy sigma=1.195725 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.405 mas, bmaj=7.006 mas, bpa=-1.943 degrees ! Estimated noise=0.338061 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00165271 Jy ! Component: 100 - total flux cleaned = -0.0017178 Jy ! Component: 150 - total flux cleaned = -0.00182848 Jy ! Component: 200 - total flux cleaned = -0.00186938 Jy ! Total flux subtracted in 200 components = -0.00186938 Jy ! Clean residual min=-0.001829 max=0.001874 Jy/beam ! Clean residual mean=-0.000002 rms=0.000436 Jy/beam ! Combined flux in latest and established models = 0.18866 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 43 components and 0.18866 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.061919Jy sigma=1.192974 ! Fit after self-cal, rms=0.061980Jy sigma=1.192681 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (77.5, 99.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00118087 Jy ! Component: 100 - total flux cleaned = 0.00152813 Jy ! Component: 150 - total flux cleaned = 0.00156484 Jy ! Component: 200 - total flux cleaned = 0.00153125 Jy ! Total flux subtracted in 200 components = 0.00153125 Jy ! Clean residual min=-0.001720 max=0.001548 Jy/beam ! Clean residual mean=-0.000001 rms=0.000417 Jy/beam ! Combined flux in latest and established models = 0.190191 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 54 components and 0.190191 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.061903Jy sigma=1.191352 ! Fit after self-cal, rms=0.061903Jy sigma=1.191305 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.061903Jy sigma=1.191305 ! Fit after self-cal, rms=0.062324Jy sigma=1.190777 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.404 mas, bmaj=7.004 mas, bpa=-2.086 degrees ! Estimated noise=0.338645 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000537023 Jy ! Component: 100 - total flux cleaned = -0.000346716 Jy ! Component: 150 - total flux cleaned = -0.000311003 Jy ! Component: 200 - total flux cleaned = -0.000310952 Jy ! Total flux subtracted in 200 components = -0.000310952 Jy ! Clean residual min=-0.001686 max=0.001487 Jy/beam ! Clean residual mean=-0.000001 rms=0.000397 Jy/beam ! Combined flux in latest and established models = 0.18988 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 57 components and 0.18988 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.062279Jy sigma=1.189988 ! Fit after self-cal, rms=0.062285Jy sigma=1.189984 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.37235e-05 Jy ! Component: 100 - total flux cleaned = -2.28274e-05 Jy ! Component: 150 - total flux cleaned = -6.87573e-05 Jy ! Component: 200 - total flux cleaned = -0.000111702 Jy ! Total flux subtracted in 200 components = -0.000111702 Jy ! Clean residual min=-0.001658 max=0.001448 Jy/beam ! Clean residual mean=-0.000001 rms=0.000392 Jy/beam ! Combined flux in latest and established models = 0.189768 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 61 components and 0.189768 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.062267Jy sigma=1.189665 ! Fit after self-cal, rms=0.062267Jy sigma=1.189659 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.062267Jy sigma=1.189659 ! Fit after self-cal, rms=0.062524Jy sigma=1.189534 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.459 mas, bmaj=10.54 mas, bpa=-1.956 degrees ! Estimated noise=0.41695 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00037239 Jy ! Component: 100 - total flux cleaned = -0.000401057 Jy ! Component: 150 - total flux cleaned = -0.000413764 Jy ! Component: 200 - total flux cleaned = -0.000413947 Jy ! Total flux subtracted in 200 components = -0.000413947 Jy ! Clean residual min=-0.001636 max=0.001581 Jy/beam ! Clean residual mean=-0.000004 rms=0.000451 Jy/beam ! Combined flux in latest and established models = 0.189354 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 77 components and 0.189354 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.062518Jy sigma=1.189428 ! Fit after self-cal, rms=0.062521Jy sigma=1.189423 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.4218e-06 Jy ! Component: 100 - total flux cleaned = -1.16182e-05 Jy ! Component: 150 - total flux cleaned = -1.16806e-05 Jy ! Component: 200 - total flux cleaned = -2.0621e-05 Jy ! Total flux subtracted in 200 components = -2.0621e-05 Jy ! Clean residual min=-0.001643 max=0.001588 Jy/beam ! Clean residual mean=-0.000004 rms=0.000450 Jy/beam ! Combined flux in latest and established models = 0.189334 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 80 components and 0.189334 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.062519Jy sigma=1.189380 ! Fit after self-cal, rms=0.062518Jy sigma=1.189378 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.403 mas, bmaj=7.006 mas, bpa=-2.156 degrees ! Estimated noise=0.33917 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.403 x 7.006 at -2.156 degrees (North through East) ! Clean map min=-0.0016033 max=0.17709 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.803 mas, bmaj=6.128 mas, bpa=-2.078 degrees ! Estimated noise=0.532091 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.136649 Jy ! Component: 100 - total flux cleaned = 0.16713 Jy ! Component: 150 - total flux cleaned = 0.17776 Jy ! Component: 200 - total flux cleaned = 0.182985 Jy ! Total flux subtracted in 200 components = 0.182985 Jy ! Clean residual min=-0.002881 max=0.002621 Jy/beam ! Clean residual mean=-0.000004 rms=0.000672 Jy/beam ! Combined flux in latest and established models = 0.182985 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.182985 Jy ! Inverting map and beam ! Estimated beam: bmin=3.403 mas, bmaj=7.006 mas, bpa=-2.156 degrees ! Estimated noise=0.33917 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00267352 Jy ! Component: 100 - total flux cleaned = 0.00417401 Jy ! Component: 150 - total flux cleaned = 0.0049808 Jy ! Component: 200 - total flux cleaned = 0.00552617 Jy ! Total flux subtracted in 200 components = 0.00552617 Jy ! Clean residual min=-0.001740 max=0.001615 Jy/beam ! Clean residual mean=-0.000002 rms=0.000399 Jy/beam ! Combined flux in latest and established models = 0.188511 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 30 components and 0.188511 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.459 mas, bmaj=10.54 mas, bpa=-1.956 degrees ! Estimated noise=0.41695 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000150746 Jy ! Component: 100 - total flux cleaned = 0.000281902 Jy ! Component: 150 - total flux cleaned = 0.000365231 Jy ! Component: 200 - total flux cleaned = 0.000425355 Jy ! Total flux subtracted in 200 components = 0.000425355 Jy ! Clean residual min=-0.001670 max=0.001519 Jy/beam ! Clean residual mean=-0.000004 rms=0.000456 Jy/beam ! Combined flux in latest and established models = 0.188936 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.14761e-05 Jy ! Component: 100 - total flux cleaned = 6.68676e-05 Jy ! Component: 150 - total flux cleaned = 7.9097e-05 Jy ! Component: 200 - total flux cleaned = 0.000101645 Jy ! Total flux subtracted in 200 components = 0.000101645 Jy ! Clean residual min=-0.001673 max=0.001532 Jy/beam ! Clean residual mean=-0.000004 rms=0.000454 Jy/beam ! Combined flux in latest and established models = 0.189038 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 59 components and 0.189038 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.403 mas, bmaj=7.006 mas, bpa=-2.156 degrees ! Estimated noise=0.33917 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.78483e-05 Jy ! Component: 100 - total flux cleaned = 6.27119e-05 Jy ! Component: 150 - total flux cleaned = 0.000148684 Jy ! Component: 200 - total flux cleaned = 0.000167527 Jy ! Total flux subtracted in 200 components = 0.000167527 Jy ! Clean residual min=-0.001642 max=0.001509 Jy/beam ! Clean residual mean=-0.000001 rms=0.000387 Jy/beam ! Combined flux in latest and established models = 0.189205 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 69 components and 0.189205 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.062506Jy sigma=1.189306 ! Fit after self-cal, rms=0.062505Jy sigma=1.189281 wmodel J0116+2422_S_map.mod ! Writing 69 model components to file: J0116+2422_S_map.mod wobs J0116+2422_S_uvs.fits ! Writing UV FITS file: J0116+2422_S_uvs.fits wwins J0116+2422_S_map.win ! wwins: Wrote 2 windows to J0116+2422_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000129523 Jy ! Component: 100 - total flux cleaned = -2.5508e-05 Jy ! Component: 150 - total flux cleaned = 4.8669e-05 Jy ! Component: 200 - total flux cleaned = 0.000216067 Jy ! Component: 250 - total flux cleaned = 0.000285867 Jy ! Component: 300 - total flux cleaned = 0.000354152 Jy ! Component: 350 - total flux cleaned = 0.000442704 Jy ! Component: 400 - total flux cleaned = 0.000398735 Jy ! Component: 450 - total flux cleaned = 0.000356176 Jy ! Component: 500 - total flux cleaned = 0.00029342 Jy ! Component: 550 - total flux cleaned = 0.000293445 Jy ! Component: 600 - total flux cleaned = 0.000252802 Jy ! Component: 650 - total flux cleaned = 0.000233446 Jy ! Component: 700 - total flux cleaned = 0.000253398 Jy ! Component: 750 - total flux cleaned = 0.000195816 Jy ! Component: 800 - total flux cleaned = 0.000195767 Jy ! Component: 850 - total flux cleaned = 8.37479e-05 Jy ! Component: 900 - total flux cleaned = 8.40229e-05 Jy ! Component: 950 - total flux cleaned = 6.5765e-05 Jy ! Component: 1000 - total flux cleaned = 8.33504e-05 Jy ! Component: 1050 - total flux cleaned = 1.25372e-05 Jy ! Component: 1100 - total flux cleaned = 1.25753e-05 Jy ! Component: 1150 - total flux cleaned = 2.95849e-05 Jy ! Component: 1200 - total flux cleaned = -2.12978e-05 Jy ! Component: 1250 - total flux cleaned = -3.82385e-05 Jy ! Component: 1300 - total flux cleaned = -5.46775e-05 Jy ! Component: 1350 - total flux cleaned = -5.46405e-05 Jy ! Component: 1400 - total flux cleaned = -3.84375e-05 Jy ! Component: 1450 - total flux cleaned = -6.8012e-06 Jy ! Component: 1500 - total flux cleaned = -5.38229e-05 Jy ! Component: 1550 - total flux cleaned = -7.48504e-06 Jy ! Component: 1600 - total flux cleaned = -2.26079e-05 Jy ! Component: 1650 - total flux cleaned = 7.6675e-06 Jy ! Component: 1700 - total flux cleaned = 3.7582e-05 Jy ! Component: 1750 - total flux cleaned = 8.19326e-05 Jy ! Component: 1800 - total flux cleaned = 0.000111103 Jy ! Component: 1850 - total flux cleaned = 0.000125442 Jy ! Component: 1900 - total flux cleaned = 0.000154296 Jy ! Component: 1950 - total flux cleaned = 0.000196942 Jy ! Component: 2000 - total flux cleaned = 0.000267109 Jy ! Component: 2050 - total flux cleaned = 0.000336674 Jy ! Component: 2100 - total flux cleaned = 0.000350388 Jy ! Component: 2150 - total flux cleaned = 0.000432349 Jy ! Component: 2200 - total flux cleaned = 0.00047274 Jy ! Component: 2250 - total flux cleaned = 0.000445785 Jy ! Component: 2300 - total flux cleaned = 0.000472408 Jy ! Component: 2350 - total flux cleaned = 0.000551327 Jy ! Component: 2400 - total flux cleaned = 0.000616546 Jy ! Component: 2450 - total flux cleaned = 0.000668144 Jy ! Component: 2500 - total flux cleaned = 0.000655344 Jy ! Component: 2550 - total flux cleaned = 0.000706147 Jy ! Component: 2600 - total flux cleaned = 0.000794212 Jy ! Component: 2650 - total flux cleaned = 0.000781613 Jy ! Component: 2700 - total flux cleaned = 0.000818816 Jy ! Component: 2750 - total flux cleaned = 0.000867927 Jy ! Component: 2800 - total flux cleaned = 0.000880128 Jy ! Component: 2850 - total flux cleaned = 0.000904411 Jy ! Component: 2900 - total flux cleaned = 0.000952353 Jy ! Component: 2950 - total flux cleaned = 0.000975968 Jy ! Component: 3000 - total flux cleaned = 0.000975934 Jy ! Component: 3050 - total flux cleaned = 0.000999435 Jy ! Component: 3100 - total flux cleaned = 0.00104588 Jy ! Component: 3150 - total flux cleaned = 0.00111501 Jy ! Component: 3200 - total flux cleaned = 0.00106906 Jy ! Component: 3250 - total flux cleaned = 0.0011258 Jy ! Component: 3300 - total flux cleaned = 0.00105831 Jy ! Component: 3350 - total flux cleaned = 0.00118148 Jy ! Component: 3400 - total flux cleaned = 0.00115928 Jy ! Component: 3450 - total flux cleaned = 0.00117029 Jy ! Component: 3500 - total flux cleaned = 0.00122509 Jy ! Component: 3550 - total flux cleaned = 0.00122503 Jy ! Component: 3600 - total flux cleaned = 0.0012249 Jy ! Component: 3650 - total flux cleaned = 0.00123561 Jy ! Component: 3700 - total flux cleaned = 0.00127821 Jy ! Component: 3750 - total flux cleaned = 0.00129946 Jy ! Component: 3800 - total flux cleaned = 0.00127839 Jy ! Component: 3850 - total flux cleaned = 0.00128894 Jy ! Component: 3900 - total flux cleaned = 0.00128899 Jy ! Component: 3950 - total flux cleaned = 0.00134056 Jy ! Component: 4000 - total flux cleaned = 0.00134057 Jy ! Component: 4050 - total flux cleaned = 0.00138117 Jy ! Total flux subtracted in 4096 components = 0.0013508 Jy ! Clean residual min=-0.000584 max=0.000633 Jy/beam ! Clean residual mean=-0.000000 rms=0.000187 Jy/beam ! Combined flux in latest and established models = 0.190556 Jy keep ! Adding 303 model components to the UV plane model. ! The established model now contains 372 components and 0.190556 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J0116+2422_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.403 x 7.006 at -2.156 degrees (North through East) ! Clean map min=-0.0012441 max=0.17734 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J0116+2422_S_map.fits wmodel /vlbi/uf001/uva//J0116+2422_S_map.mod ! Writing 372 model components to file: /vlbi/uf001/uva//J0116+2422_S_map.mod wobs /vlbi/uf001/uva//J0116+2422_S_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J0116+2422_S_uvs.fits wwins /vlbi/uf001/uva//J0116+2422_S_map.win ! wwins: Wrote 3 windows to /vlbi/uf001/uva//J0116+2422_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.177338 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000185607 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.313988 0.313988 0.627975 1.25595 2.5119 5.0238 10.0476 20.0952 40.1904 80.3809 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.177 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 955.451 quit ! Quitting program ! Log file /vlbi/uf001/uva//J0116+2422_S_dfm.log closed on Sun Jan 13 20:55:24 2019