! Started logfile: /vlbi/uf001/uva//J0115-3049_S_dfm.log on Sun Jan 13 20:55:08 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J0115-3049_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0115-3049_S_uva.fits
! AN table 1: 29 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.958621 visibilities/baseline/integration-bin.
! Found source: J0115-3049
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 3753 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0115-3049_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.175967Jy  sigma=16.111267
! Fit after  self-cal, rms=0.451039Jy  sigma=5.858419
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.537 mas, bmaj=6.938 mas, bpa=-9.12 degrees
! Estimated noise=1.17106 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.445708 Jy
! Component: 100  -  total flux cleaned = 0.542925 Jy
! Total flux subtracted in 100 components = 0.542925 Jy
! Clean residual min=-0.016455 max=0.041905 Jy/beam
! Clean residual mean=-0.000148 rms=0.005613 Jy/beam
! Combined flux in latest and established models = 0.542925 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.542925 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.138167Jy  sigma=1.722252
! Fit after  self-cal, rms=0.138166Jy  sigma=1.722228
! Inverting map 
! Added new window around map position (-17.5, 84).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0380013 Jy
! Component: 100  -  total flux cleaned = 0.0592434 Jy
! Total flux subtracted in 100 components = 0.0592434 Jy
! Clean residual min=-0.015346 max=0.029824 Jy/beam
! Clean residual mean=-0.000075 rms=0.004474 Jy/beam
! Combined flux in latest and established models = 0.602168 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 17 components and 0.602168 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.128396Jy  sigma=1.570221
! Fit after  self-cal, rms=0.127944Jy  sigma=1.562381
! Inverting map 
! Added new window around map position (3.5, -6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0260553 Jy
! Component: 100  -  total flux cleaned = 0.0397013 Jy
! Total flux subtracted in 100 components = 0.0397013 Jy
! Clean residual min=-0.019026 max=0.026514 Jy/beam
! Clean residual mean=-0.000034 rms=0.003952 Jy/beam
! Combined flux in latest and established models = 0.64187 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 30 components and 0.64187 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.121292Jy  sigma=1.479157
! Fit after  self-cal, rms=0.120588Jy  sigma=1.466172
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.023 mas, bmaj=7.802 mas, bpa=-7.118 degrees
! Estimated noise=0.901154 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-6, 0).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0240355 Jy
! Component: 100  -  total flux cleaned = 0.0327189 Jy
! Component: 150  -  total flux cleaned = 0.0378039 Jy
! Component: 200  -  total flux cleaned = 0.0389442 Jy
! Total flux subtracted in 200 components = 0.0389442 Jy
! Clean residual min=-0.017303 max=0.013467 Jy/beam
! Clean residual mean=-0.000010 rms=0.003336 Jy/beam
! Combined flux in latest and established models = 0.680814 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 64 components and 0.680814 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.113895Jy  sigma=1.385273
! Fit after  self-cal, rms=0.113708Jy  sigma=1.382385
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.023 x 7.802 at -7.118 degrees (North through East)
! Clean map  min=-0.019422  max=0.55104 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.96     HN        1.12     KP        0.98     
!   LA        0.98     MK        0.99     NL        1.04     OV        0.97     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.94     HN        1.16     KP        1.00     
!   LA        0.98     MK        1.00     NL        1.03     OV        0.99     
!   PT        1.01     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.97     HN        1.17     KP        1.00     
!   LA        0.97     MK        0.99     NL        1.02     OV        0.96     
!   PT        1.03     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.113708Jy  sigma=1.382385
! Fit after  self-cal, rms=0.112541Jy  sigma=1.312812
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.032 mas, bmaj=7.772 mas, bpa=-6.926 degrees
! Estimated noise=0.912076 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00769577 Jy
! Component: 100  -  total flux cleaned = -0.011731 Jy
! Component: 150  -  total flux cleaned = -0.0139495 Jy
! Component: 200  -  total flux cleaned = -0.0146087 Jy
! Total flux subtracted in 200 components = -0.0146087 Jy
! Clean residual min=-0.011389 max=0.010726 Jy/beam
! Clean residual mean=0.000001 rms=0.002552 Jy/beam
! Combined flux in latest and established models = 0.666205 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 89 components and 0.666205 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.111159Jy  sigma=1.293759
! Fit after  self-cal, rms=0.111181Jy  sigma=1.293173
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.111181Jy  sigma=1.293173
! Fit after  self-cal, rms=0.107945Jy  sigma=1.235958
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.037 mas, bmaj=7.779 mas, bpa=-7.053 degrees
! Estimated noise=0.91356 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00850909 Jy
! Component: 100  -  total flux cleaned = -0.0106546 Jy
! Component: 150  -  total flux cleaned = -0.0112667 Jy
! Component: 200  -  total flux cleaned = -0.0120524 Jy
! Total flux subtracted in 200 components = -0.0120524 Jy
! Clean residual min=-0.007448 max=0.007841 Jy/beam
! Clean residual mean=-0.000019 rms=0.001712 Jy/beam
! Combined flux in latest and established models = 0.654153 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 105 components and 0.654153 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.107283Jy  sigma=1.222646
! Fit after  self-cal, rms=0.107267Jy  sigma=1.221779
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (33.5, -41).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00311459 Jy
! Component: 100  -  total flux cleaned = 0.00212861 Jy
! Component: 150  -  total flux cleaned = 0.00162106 Jy
! Component: 200  -  total flux cleaned = 0.00119412 Jy
! Total flux subtracted in 200 components = 0.00119412 Jy
! Clean residual min=-0.006775 max=0.005764 Jy/beam
! Clean residual mean=-0.000020 rms=0.001569 Jy/beam
! Combined flux in latest and established models = 0.655347 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 121 components and 0.655347 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.106684Jy  sigma=1.213860
! Fit after  self-cal, rms=0.106662Jy  sigma=1.213674
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.106662Jy  sigma=1.213674
! Fit after  self-cal, rms=0.108702Jy  sigma=1.207817
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.037 mas, bmaj=7.775 mas, bpa=-7.085 degrees
! Estimated noise=0.91303 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00545067 Jy
! Component: 100  -  total flux cleaned = -0.00689009 Jy
! Component: 150  -  total flux cleaned = -0.00724923 Jy
! Component: 200  -  total flux cleaned = -0.00746577 Jy
! Total flux subtracted in 200 components = -0.00746577 Jy
! Clean residual min=-0.005712 max=0.005083 Jy/beam
! Clean residual mean=-0.000020 rms=0.001376 Jy/beam
! Combined flux in latest and established models = 0.647881 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 139 components and 0.647881 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.108301Jy  sigma=1.202092
! Fit after  self-cal, rms=0.108304Jy  sigma=1.201737
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000991767 Jy
! Component: 100  -  total flux cleaned = -0.000997282 Jy
! Component: 150  -  total flux cleaned = -0.00100288 Jy
! Component: 200  -  total flux cleaned = -0.00100265 Jy
! Total flux subtracted in 200 components = -0.00100265 Jy
! Clean residual min=-0.005427 max=0.005178 Jy/beam
! Clean residual mean=-0.000023 rms=0.001326 Jy/beam
! Combined flux in latest and established models = 0.646878 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 147 components and 0.646878 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.108186Jy  sigma=1.199319
! Fit after  self-cal, rms=0.108176Jy  sigma=1.199196
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.108176Jy  sigma=1.199196
! Fit after  self-cal, rms=0.109073Jy  sigma=1.197942
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.723 mas, bmaj=19.17 mas, bpa=-1.347 degrees
! Estimated noise=1.18226 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0032349 Jy
! Component: 100  -  total flux cleaned = -0.0036629 Jy
! Component: 150  -  total flux cleaned = -0.00373847 Jy
! Component: 200  -  total flux cleaned = -0.00386896 Jy
! Total flux subtracted in 200 components = -0.00386896 Jy
! Clean residual min=-0.006231 max=0.004583 Jy/beam
! Clean residual mean=-0.000028 rms=0.001589 Jy/beam
! Combined flux in latest and established models = 0.643009 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 157 components and 0.643009 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.109002Jy  sigma=1.197264
! Fit after  self-cal, rms=0.109010Jy  sigma=1.197200
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.60712e-05 Jy
! Component: 100  -  total flux cleaned = -3.31601e-05 Jy
! Component: 150  -  total flux cleaned = 1.97367e-05 Jy
! Component: 200  -  total flux cleaned = 6.95088e-05 Jy
! Total flux subtracted in 200 components = 6.95088e-05 Jy
! Clean residual min=-0.006075 max=0.004567 Jy/beam
! Clean residual mean=-0.000028 rms=0.001567 Jy/beam
! Combined flux in latest and established models = 0.643079 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 174 components and 0.643079 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.108999Jy  sigma=1.197199
! Fit after  self-cal, rms=0.109000Jy  sigma=1.197164
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.038 mas, bmaj=7.773 mas, bpa=-7.1 degrees
! Estimated noise=0.91239 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.038 x 7.773 at -7.1 degrees (North through East)
! Clean map  min=-0.0073368  max=0.56105 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.109000Jy  sigma=1.197164
! Fit after  self-cal, rms=0.105367Jy  sigma=1.120937
! Inverting map and beam 
! Estimated beam: bmin=3.042 mas, bmaj=7.778 mas, bpa=-6.965 degrees
! Estimated noise=0.91227 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00284513 Jy
! Component: 100  -  total flux cleaned = -0.00325223 Jy
! Component: 150  -  total flux cleaned = -0.00342362 Jy
! Component: 200  -  total flux cleaned = -0.00350179 Jy
! Total flux subtracted in 200 components = -0.00350179 Jy
! Clean residual min=-0.004602 max=0.005104 Jy/beam
! Clean residual mean=-0.000015 rms=0.001195 Jy/beam
! Combined flux in latest and established models = 0.639577 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 189 components and 0.639577 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.105180Jy  sigma=1.118014
! Fit after  self-cal, rms=0.105172Jy  sigma=1.117849
! Inverting map 
! Added new window around map position (-93, 17).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00385695 Jy
! Component: 100  -  total flux cleaned = 0.00412448 Jy
! Component: 150  -  total flux cleaned = 0.00402941 Jy
! Component: 200  -  total flux cleaned = 0.00411426 Jy
! Total flux subtracted in 200 components = 0.00411426 Jy
! Clean residual min=-0.004539 max=0.004287 Jy/beam
! Clean residual mean=-0.000025 rms=0.001125 Jy/beam
! Combined flux in latest and established models = 0.643691 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 205 components and 0.643691 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.104829Jy  sigma=1.113569
! Fit after  self-cal, rms=0.104818Jy  sigma=1.113336
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.104818Jy  sigma=1.113336
! Fit after  self-cal, rms=0.105105Jy  sigma=1.112702
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.552 mas, bmaj=6.89 mas, bpa=-8.941 degrees
! Estimated noise=1.18425 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.45061 Jy
! Component: 100  -  total flux cleaned = 0.548887 Jy
! Component: 150  -  total flux cleaned = 0.577237 Jy
! Component: 200  -  total flux cleaned = 0.593252 Jy
! Total flux subtracted in 200 components = 0.593252 Jy
! Clean residual min=-0.007205 max=0.010345 Jy/beam
! Clean residual mean=-0.000050 rms=0.001920 Jy/beam
! Combined flux in latest and established models = 0.593252 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.593252 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.043 mas, bmaj=7.776 mas, bpa=-6.978 degrees
! Estimated noise=0.91089 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0133751 Jy
! Component: 100  -  total flux cleaned = 0.0221103 Jy
! Component: 150  -  total flux cleaned = 0.0286559 Jy
! Component: 200  -  total flux cleaned = 0.0339057 Jy
! Total flux subtracted in 200 components = 0.0339057 Jy
! Clean residual min=-0.005011 max=0.004846 Jy/beam
! Clean residual mean=-0.000033 rms=0.001292 Jy/beam
! Combined flux in latest and established models = 0.627158 Jy
! Adding 53 model components to the UV plane model.
! The established model now contains 62 components and 0.627158 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.745 mas, bmaj=19.22 mas, bpa=-1.327 degrees
! Estimated noise=1.17709 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.006233 Jy
! Component: 100  -  total flux cleaned = 0.00755928 Jy
! Component: 150  -  total flux cleaned = 0.00868151 Jy
! Component: 200  -  total flux cleaned = 0.00963741 Jy
! Total flux subtracted in 200 components = 0.00963741 Jy
! Clean residual min=-0.005261 max=0.004377 Jy/beam
! Clean residual mean=-0.000041 rms=0.001454 Jy/beam
! Combined flux in latest and established models = 0.636795 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000653128 Jy
! Component: 100  -  total flux cleaned = 0.00115008 Jy
! Component: 150  -  total flux cleaned = 0.00144617 Jy
! Component: 200  -  total flux cleaned = 0.00151236 Jy
! Total flux subtracted in 200 components = 0.00151236 Jy
! Clean residual min=-0.005191 max=0.004298 Jy/beam
! Clean residual mean=-0.000037 rms=0.001394 Jy/beam
! Combined flux in latest and established models = 0.638308 Jy
! Adding 49 model components to the UV plane model.
! The established model now contains 108 components and 0.638308 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.043 mas, bmaj=7.776 mas, bpa=-6.978 degrees
! Estimated noise=0.91089 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00249368 Jy
! Component: 100  -  total flux cleaned = 0.00237179 Jy
! Component: 150  -  total flux cleaned = 0.00215952 Jy
! Component: 200  -  total flux cleaned = 0.00197082 Jy
! Total flux subtracted in 200 components = 0.00197082 Jy
! Clean residual min=-0.004631 max=0.004270 Jy/beam
! Clean residual mean=-0.000020 rms=0.001098 Jy/beam
! Combined flux in latest and established models = 0.640278 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 125 components and 0.640278 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.105320Jy  sigma=1.112319
! Fit after  self-cal, rms=0.105282Jy  sigma=1.111749
wmodel J0115-3049_S_map.mod
! Writing 125 model components to file: J0115-3049_S_map.mod
wobs   J0115-3049_S_uvs.fits
! Writing UV FITS file: J0115-3049_S_uvs.fits
wwins  J0115-3049_S_map.win
! wwins: Wrote 6 windows to J0115-3049_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00132619 Jy
! Component: 100  -  total flux cleaned = -0.00261572 Jy
! Component: 150  -  total flux cleaned = -0.00347645 Jy
! Component: 200  -  total flux cleaned = -0.00395583 Jy
! Component: 250  -  total flux cleaned = -0.00428487 Jy
! Component: 300  -  total flux cleaned = -0.00454064 Jy
! Component: 350  -  total flux cleaned = -0.0047881 Jy
! Component: 400  -  total flux cleaned = -0.00502803 Jy
! Component: 450  -  total flux cleaned = -0.00531705 Jy
! Component: 500  -  total flux cleaned = -0.00531727 Jy
! Component: 550  -  total flux cleaned = -0.00542819 Jy
! Component: 600  -  total flux cleaned = -0.00558946 Jy
! Component: 650  -  total flux cleaned = -0.00574728 Jy
! Component: 700  -  total flux cleaned = -0.00600316 Jy
! Component: 750  -  total flux cleaned = -0.00610366 Jy
! Component: 800  -  total flux cleaned = -0.00630096 Jy
! Component: 850  -  total flux cleaned = -0.00649319 Jy
! Component: 900  -  total flux cleaned = -0.00654076 Jy
! Component: 950  -  total flux cleaned = -0.00663562 Jy
! Component: 1000  -  total flux cleaned = -0.00668205 Jy
! Component: 1050  -  total flux cleaned = -0.00686524 Jy
! Component: 1100  -  total flux cleaned = -0.00713398 Jy
! Component: 1150  -  total flux cleaned = -0.007398 Jy
! Component: 1200  -  total flux cleaned = -0.00739766 Jy
! Component: 1250  -  total flux cleaned = -0.00765545 Jy
! Component: 1300  -  total flux cleaned = -0.00748637 Jy
! Component: 1350  -  total flux cleaned = -0.00778068 Jy
! Component: 1400  -  total flux cleaned = -0.00786309 Jy
! Component: 1450  -  total flux cleaned = -0.0081085 Jy
! Component: 1500  -  total flux cleaned = -0.00810849 Jy
! Component: 1550  -  total flux cleaned = -0.00830852 Jy
! Component: 1600  -  total flux cleaned = -0.00846629 Jy
! Component: 1650  -  total flux cleaned = -0.00858283 Jy
! Component: 1700  -  total flux cleaned = -0.00873703 Jy
! Component: 1750  -  total flux cleaned = -0.0088896 Jy
! Component: 1800  -  total flux cleaned = -0.0090404 Jy
! Component: 1850  -  total flux cleaned = -0.00911446 Jy
! Component: 1900  -  total flux cleaned = -0.00922557 Jy
! Component: 1950  -  total flux cleaned = -0.00926246 Jy
! Component: 2000  -  total flux cleaned = -0.00933506 Jy
! Component: 2050  -  total flux cleaned = -0.00947896 Jy
! Component: 2100  -  total flux cleaned = -0.00954975 Jy
! Component: 2150  -  total flux cleaned = -0.00965492 Jy
! Component: 2200  -  total flux cleaned = -0.00955066 Jy
! Component: 2250  -  total flux cleaned = -0.00972266 Jy
! Component: 2300  -  total flux cleaned = -0.00975632 Jy
! Component: 2350  -  total flux cleaned = -0.00968906 Jy
! Component: 2400  -  total flux cleaned = -0.00978943 Jy
! Component: 2450  -  total flux cleaned = -0.00982242 Jy
! Component: 2500  -  total flux cleaned = -0.00985523 Jy
! Component: 2550  -  total flux cleaned = -0.00988797 Jy
! Component: 2600  -  total flux cleaned = -0.00995273 Jy
! Component: 2650  -  total flux cleaned = -0.0100166 Jy
! Component: 2700  -  total flux cleaned = -0.0100171 Jy
! Component: 2750  -  total flux cleaned = -0.0100484 Jy
! Component: 2800  -  total flux cleaned = -0.0101425 Jy
! Component: 2850  -  total flux cleaned = -0.0103291 Jy
! Component: 2900  -  total flux cleaned = -0.0103598 Jy
! Component: 2950  -  total flux cleaned = -0.010482 Jy
! Component: 3000  -  total flux cleaned = -0.0104816 Jy
! Component: 3050  -  total flux cleaned = -0.0105718 Jy
! Component: 3100  -  total flux cleaned = -0.0105719 Jy
! Component: 3150  -  total flux cleaned = -0.0106613 Jy
! Component: 3200  -  total flux cleaned = -0.0106614 Jy
! Component: 3250  -  total flux cleaned = -0.0107205 Jy
! Component: 3300  -  total flux cleaned = -0.0108371 Jy
! Component: 3350  -  total flux cleaned = -0.0109236 Jy
! Component: 3400  -  total flux cleaned = -0.0110097 Jy
! Component: 3450  -  total flux cleaned = -0.0110097 Jy
! Component: 3500  -  total flux cleaned = -0.0110945 Jy
! Component: 3550  -  total flux cleaned = -0.0111505 Jy
! Component: 3600  -  total flux cleaned = -0.0112622 Jy
! Component: 3650  -  total flux cleaned = -0.0111787 Jy
! Component: 3700  -  total flux cleaned = -0.011179 Jy
! Component: 3750  -  total flux cleaned = -0.0112065 Jy
! Component: 3800  -  total flux cleaned = -0.0112338 Jy
! Component: 3850  -  total flux cleaned = -0.0112338 Jy
! Component: 3900  -  total flux cleaned = -0.0113411 Jy
! Component: 3950  -  total flux cleaned = -0.0113408 Jy
! Component: 4000  -  total flux cleaned = -0.0113938 Jy
! Component: 4050  -  total flux cleaned = -0.0114199 Jy
! Total flux subtracted in 4096 components = -0.0114199 Jy
! Clean residual min=-0.001588 max=0.001591 Jy/beam
! Clean residual mean=-0.000011 rms=0.000481 Jy/beam
! Combined flux in latest and established models = 0.628858 Jy
keep
! Adding 295 model components to the UV plane model.
! The established model now contains 420 components and 0.628859 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0115-3049_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.043 x 7.776 at -6.978 degrees (North through East)
! Clean map  min=-0.0041812  max=0.56958 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0115-3049_S_map.fits
wmodel /vlbi/uf001/uva//J0115-3049_S_map.mod
! Writing 420 model components to file: /vlbi/uf001/uva//J0115-3049_S_map.mod
wobs   /vlbi/uf001/uva//J0115-3049_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0115-3049_S_uvs.fits
wwins  /vlbi/uf001/uva//J0115-3049_S_map.win
! wwins: Wrote 7 windows to /vlbi/uf001/uva//J0115-3049_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.56958 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000470622 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.247878 0.247878 0.495757 0.991514 1.98303 3.96605 7.93211 15.8642 31.7284 63.4569
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0014 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.569 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1210.27 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0115-3049_S_dfm.log closed on Sun Jan 13 20:55:13 2019