! Started logfile: /vlbi/uf001/uvm//J0113+4948_X_a_dfm.log on Sun Jan 13 20:28:19 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uvm//J0113+4948_X_a_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J0113+4948_X_a_uvm.fits ! AN table 1: 12 integrations on 45 of 45 possible baselines. ! AN table 2: 7 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.816919 visibilities/baseline/integration-bin. ! Found source: J0113+4948 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 7764 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0113+4948_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.110610Jy sigma=20.480182 ! Fit after self-cal, rms=0.530100Jy sigma=9.984066 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.839 mas, bmaj=1.182 mas, bpa=24.85 degrees ! Estimated noise=0.671298 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.345327 Jy ! Component: 100 - total flux cleaned = 0.429652 Jy ! Total flux subtracted in 100 components = 0.429652 Jy ! Clean residual min=-0.021957 max=0.036047 Jy/beam ! Clean residual mean=0.000074 rms=0.005050 Jy/beam ! Combined flux in latest and established models = 0.429652 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.429652 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.163187Jy sigma=2.845325 ! Fit after self-cal, rms=0.163135Jy sigma=2.844388 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0405135 Jy ! Component: 100 - total flux cleaned = 0.0626426 Jy ! Total flux subtracted in 100 components = 0.0626426 Jy ! Clean residual min=-0.019283 max=0.028912 Jy/beam ! Clean residual mean=0.000054 rms=0.004524 Jy/beam ! Combined flux in latest and established models = 0.492294 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 13 components and 0.492294 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.141611Jy sigma=2.496274 ! Fit after self-cal, rms=0.141418Jy sigma=2.492758 ! Inverting map ! Added new window around map position (1.4, 1.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0256864 Jy ! Component: 100 - total flux cleaned = 0.0392308 Jy ! Total flux subtracted in 100 components = 0.0392308 Jy ! Clean residual min=-0.018252 max=0.027035 Jy/beam ! Clean residual mean=0.000047 rms=0.004252 Jy/beam ! Combined flux in latest and established models = 0.531525 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 25 components and 0.531525 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.134236Jy sigma=2.375188 ! Fit after self-cal, rms=0.133660Jy sigma=2.362376 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.022 mas, bmaj=1.488 mas, bpa=27.7 degrees ! Estimated noise=0.455673 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0288523 Jy ! Component: 100 - total flux cleaned = 0.0461965 Jy ! Component: 150 - total flux cleaned = 0.0583013 Jy ! Component: 200 - total flux cleaned = 0.0638247 Jy ! Total flux subtracted in 200 components = 0.0638247 Jy ! Clean residual min=-0.019575 max=0.026682 Jy/beam ! Clean residual mean=0.000177 rms=0.005316 Jy/beam ! Combined flux in latest and established models = 0.59535 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 36 components and 0.59535 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.124731Jy sigma=2.253007 ! Fit after self-cal, rms=0.124544Jy sigma=2.249214 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.022 x 1.488 at 27.7 degrees (North through East) ! Clean map min=-0.018179 max=0.46798 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.21 FD 1.08 HN 0.89 KP 1.01 ! LA 1.09 MK 1.14 NL 1.16 OV 1.00 ! PT 0.94 SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 0.93 KP 0.92 LA 0.92 ! MK 0.95 NL 0.99 OV 0.85 PT 0.77 ! SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.20 FD 1.09 HN 0.91 KP 1.07 ! LA 1.06 MK 1.17 NL 1.17 OV 0.99 ! PT 0.95 SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.92 FD 0.93 KP 0.93 LA 0.93 ! MK 0.98 NL 0.96 OV 0.86 PT 0.77 ! SC 0.91 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.22 FD 1.07 HN 0.92 KP 1.04 ! LA 1.07 MK 1.14 NL 1.18 OV 0.99 ! PT 0.96 SC 1.05 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.92 FD 0.92 KP 0.94 LA 0.91 ! MK 0.99 NL 0.95 OV 0.85 PT 0.75 ! SC 0.93 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.21 FD 1.11 HN 0.89 KP 1.03 ! LA 1.07 MK 1.12 NL 1.20 OV 0.98 ! PT 0.95 SC 1.05 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.92 FD 0.91 KP 0.93 LA 0.91 ! MK 0.95 NL 0.97 OV 0.86 PT 0.78 ! SC 0.91 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.20 FD 1.07 HN 0.92 KP 1.05 ! LA 1.06 MK 1.10 NL 1.15 OV 0.98 ! PT 0.97 SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.92 FD 0.91 KP 0.91 LA 0.91 ! MK 0.95 NL 0.98 OV 0.85 PT 0.77 ! SC 0.92 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.20 FD 1.07 HN 0.91 KP 1.03 ! LA 1.07 MK 1.12 NL 1.19 OV 1.00 ! PT 0.96 SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.92 FD 0.90 KP 0.93 LA 0.91 ! MK 0.96 NL 0.96 OV 0.86 PT 0.77 ! SC 0.91 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.20 FD 1.05 HN 0.91 KP 1.04 ! LA 1.05 MK 1.15 NL 1.17 OV 0.99 ! PT 0.93 SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.90 FD 0.91 KP 0.91 LA 0.90 ! MK 0.94 NL 0.99 OV 0.85 PT 0.77 ! SC 0.92 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.20 FD 1.07 HN 0.90 KP 1.03 ! LA 1.06 MK 1.11 NL 1.17 OV 1.00 ! PT 0.95 SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.90 FD 0.91 KP 0.93 LA 0.91 ! MK 0.94 NL 0.95 OV 0.85 PT 0.77 ! SC 0.91 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.20 FD 1.07 HN 0.90 KP 1.03 ! LA 1.03 MK 1.09 NL 1.19 OV 0.99 ! PT 0.96 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.91 FD 0.89 KP 0.92 LA 0.90 ! MK 0.93 NL 0.95 OV 0.83 PT 0.77 ! SC 0.94 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.21 FD 1.05 HN 0.94 KP 1.02 ! LA 1.06 MK 1.15 NL 1.17 OV 1.00 ! PT 0.93 SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.91 FD 0.90 KP 0.92 LA 0.91 ! MK 0.95 NL 0.93 OV 0.86 PT 0.74 ! SC 0.90 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.19 FD 1.08 HN 0.88 KP 1.02 ! LA 1.06 MK 1.01 NL 1.15 OV 0.97 ! PT 0.97 SC 1.05 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 0.90 KP 0.92 LA 0.90 ! MK 0.93 NL 0.96 OV 0.85 PT 0.75 ! SC 0.91 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 1.07 HN 0.90 KP 1.01 ! LA 1.07 MK 1.02 NL 1.18 OV 0.97 ! PT 0.95 SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.91 FD 0.90 KP 0.93 LA 0.90 ! MK 0.95 NL 0.92 OV 0.83 PT 0.77 ! SC 0.94 ! ! ! Fit before self-cal, rms=0.124544Jy sigma=2.249214 ! Fit after self-cal, rms=0.087196Jy sigma=1.518863 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.012 mas, bmaj=1.534 mas, bpa=30.05 degrees ! Estimated noise=0.454358 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5.2, 9.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00878835 Jy ! Component: 100 - total flux cleaned = 0.0147417 Jy ! Component: 150 - total flux cleaned = 0.0161507 Jy ! Component: 200 - total flux cleaned = 0.0173534 Jy ! Total flux subtracted in 200 components = 0.0173534 Jy ! Clean residual min=-0.010459 max=0.012530 Jy/beam ! Clean residual mean=0.000021 rms=0.002378 Jy/beam ! Combined flux in latest and established models = 0.612703 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 59 components and 0.612703 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082445Jy sigma=1.424983 ! Fit after self-cal, rms=0.082031Jy sigma=1.415831 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082031Jy sigma=1.415831 ! Fit after self-cal, rms=0.068776Jy sigma=1.125380 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.012 mas, bmaj=1.529 mas, bpa=29.79 degrees ! Estimated noise=0.455568 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0070249 Jy ! Component: 100 - total flux cleaned = -0.00761712 Jy ! Component: 150 - total flux cleaned = -0.00742556 Jy ! Component: 200 - total flux cleaned = -0.00689846 Jy ! Total flux subtracted in 200 components = -0.00689846 Jy ! Clean residual min=-0.005060 max=0.005704 Jy/beam ! Clean residual mean=0.000005 rms=0.001152 Jy/beam ! Combined flux in latest and established models = 0.605805 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 74 components and 0.605804 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066731Jy sigma=1.087271 ! Fit after self-cal, rms=0.066429Jy sigma=1.083122 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2, 2.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00326746 Jy ! Component: 100 - total flux cleaned = 0.00533183 Jy ! Component: 150 - total flux cleaned = 0.00612767 Jy ! Component: 200 - total flux cleaned = 0.00725175 Jy ! Total flux subtracted in 200 components = 0.00725175 Jy ! Clean residual min=-0.004464 max=0.004994 Jy/beam ! Clean residual mean=-0.000001 rms=0.001012 Jy/beam ! Combined flux in latest and established models = 0.613056 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 86 components and 0.613056 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065451Jy sigma=1.064014 ! Fit after self-cal, rms=0.065282Jy sigma=1.062212 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065282Jy sigma=1.062212 ! Fit after self-cal, rms=0.065186Jy sigma=1.054588 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.008 mas, bmaj=1.535 mas, bpa=30.03 degrees ! Estimated noise=0.454505 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00406217 Jy ! Component: 100 - total flux cleaned = -0.00390928 Jy ! Component: 150 - total flux cleaned = -0.00336461 Jy ! Component: 200 - total flux cleaned = -0.00275714 Jy ! Total flux subtracted in 200 components = -0.00275714 Jy ! Clean residual min=-0.003896 max=0.004230 Jy/beam ! Clean residual mean=-0.000000 rms=0.000861 Jy/beam ! Combined flux in latest and established models = 0.610299 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 89 components and 0.610299 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064320Jy sigma=1.039617 ! Fit after self-cal, rms=0.064174Jy sigma=1.038070 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.23936e-05 Jy ! Component: 100 - total flux cleaned = 0.000879546 Jy ! Component: 150 - total flux cleaned = 0.00137557 Jy ! Component: 200 - total flux cleaned = 0.00183564 Jy ! Total flux subtracted in 200 components = 0.00183564 Jy ! Clean residual min=-0.003921 max=0.004023 Jy/beam ! Clean residual mean=-0.000001 rms=0.000813 Jy/beam ! Combined flux in latest and established models = 0.612135 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 99 components and 0.612135 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063802Jy sigma=1.031733 ! Fit after self-cal, rms=0.063725Jy sigma=1.031008 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063725Jy sigma=1.031008 ! Fit after self-cal, rms=0.063702Jy sigma=1.027130 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.236 mas, bmaj=2.623 mas, bpa=29.98 degrees ! Estimated noise=0.568175 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00188348 Jy ! Component: 100 - total flux cleaned = -0.00156113 Jy ! Component: 150 - total flux cleaned = -0.00120302 Jy ! Component: 200 - total flux cleaned = -0.000754637 Jy ! Total flux subtracted in 200 components = -0.000754637 Jy ! Clean residual min=-0.003456 max=0.003321 Jy/beam ! Clean residual mean=-0.000005 rms=0.000820 Jy/beam ! Combined flux in latest and established models = 0.61138 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 107 components and 0.61138 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063373Jy sigma=1.021916 ! Fit after self-cal, rms=0.063308Jy sigma=1.020805 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000358314 Jy ! Component: 100 - total flux cleaned = 0.000572696 Jy ! Component: 150 - total flux cleaned = 0.000759611 Jy ! Component: 200 - total flux cleaned = 0.00102798 Jy ! Total flux subtracted in 200 components = 0.00102798 Jy ! Clean residual min=-0.003160 max=0.002996 Jy/beam ! Clean residual mean=-0.000005 rms=0.000767 Jy/beam ! Combined flux in latest and established models = 0.612408 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 114 components and 0.612408 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063198Jy sigma=1.019122 ! Fit after self-cal, rms=0.063165Jy sigma=1.018702 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.005 mas, bmaj=1.54 mas, bpa=30.26 degrees ! Estimated noise=0.453313 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.005 x 1.54 at 30.26 degrees (North through East) ! Clean map min=-0.0033211 max=0.46748 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8236 mas, bmaj=1.204 mas, bpa=27.38 degrees ! Estimated noise=0.692685 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.356 Jy ! Component: 100 - total flux cleaned = 0.447613 Jy ! Component: 150 - total flux cleaned = 0.491671 Jy ! Component: 200 - total flux cleaned = 0.515926 Jy ! Total flux subtracted in 200 components = 0.515926 Jy ! Clean residual min=-0.006710 max=0.012365 Jy/beam ! Clean residual mean=0.000020 rms=0.001689 Jy/beam ! Combined flux in latest and established models = 0.515926 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.515926 Jy ! Inverting map and beam ! Estimated beam: bmin=1.005 mas, bmaj=1.54 mas, bpa=30.26 degrees ! Estimated noise=0.453313 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0209981 Jy ! Component: 100 - total flux cleaned = 0.0355334 Jy ! Component: 150 - total flux cleaned = 0.0464607 Jy ! Component: 200 - total flux cleaned = 0.055032 Jy ! Total flux subtracted in 200 components = 0.055032 Jy ! Clean residual min=-0.004104 max=0.006092 Jy/beam ! Clean residual mean=0.000033 rms=0.001156 Jy/beam ! Combined flux in latest and established models = 0.570958 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 48 components and 0.570957 Jy ! Inverting map ! Added new window around map position (-5, 6.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00717945 Jy ! Component: 100 - total flux cleaned = 0.0130564 Jy ! Component: 150 - total flux cleaned = 0.0179904 Jy ! Component: 200 - total flux cleaned = 0.0222261 Jy ! Total flux subtracted in 200 components = 0.0222261 Jy ! Clean residual min=-0.003499 max=0.004157 Jy/beam ! Clean residual mean=0.000015 rms=0.000822 Jy/beam ! Combined flux in latest and established models = 0.593184 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 78 components and 0.593183 Jy ! Inverting map ! Added new window around map position (-0.6, -2.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00348623 Jy ! Component: 100 - total flux cleaned = 0.00560802 Jy ! Component: 150 - total flux cleaned = 0.00742167 Jy ! Component: 200 - total flux cleaned = 0.00885816 Jy ! Total flux subtracted in 200 components = 0.00885816 Jy ! Clean residual min=-0.003182 max=0.003566 Jy/beam ! Clean residual mean=0.000007 rms=0.000726 Jy/beam ! Combined flux in latest and established models = 0.602042 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 99 components and 0.602042 Jy ! Inverting map ! Added new window around map position (0.4, 3.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00218948 Jy ! Component: 100 - total flux cleaned = 0.00315689 Jy ! Component: 150 - total flux cleaned = 0.0038556 Jy ! Component: 200 - total flux cleaned = 0.00442222 Jy ! Total flux subtracted in 200 components = 0.00442222 Jy ! Clean residual min=-0.002941 max=0.003218 Jy/beam ! Clean residual mean=0.000004 rms=0.000674 Jy/beam ! Combined flux in latest and established models = 0.606464 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 118 components and 0.606464 Jy ! Inverting map ! Added new window around map position (-22, -21). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00177571 Jy ! Component: 100 - total flux cleaned = 0.00248024 Jy ! Component: 150 - total flux cleaned = 0.00281588 Jy ! Component: 200 - total flux cleaned = 0.00337677 Jy ! Total flux subtracted in 200 components = 0.00337677 Jy ! Clean residual min=-0.002765 max=0.002818 Jy/beam ! Clean residual mean=0.000002 rms=0.000641 Jy/beam ! Combined flux in latest and established models = 0.609841 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 136 components and 0.609841 Jy ! Inverting map ! Added new window around map position (9, 8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00197549 Jy ! Component: 100 - total flux cleaned = 0.00230569 Jy ! Component: 150 - total flux cleaned = 0.00262368 Jy ! Component: 200 - total flux cleaned = 0.00292569 Jy ! Total flux subtracted in 200 components = 0.00292569 Jy ! Clean residual min=-0.002739 max=0.002750 Jy/beam ! Clean residual mean=0.000002 rms=0.000617 Jy/beam ! Combined flux in latest and established models = 0.612766 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 151 components and 0.612766 Jy ! Inverting map ! Added new window around map position (11.6, -0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000831473 Jy ! Component: 100 - total flux cleaned = 0.00145488 Jy ! Component: 150 - total flux cleaned = 0.0018216 Jy ! Component: 200 - total flux cleaned = 0.00217567 Jy ! Total flux subtracted in 200 components = 0.00217567 Jy ! Clean residual min=-0.002706 max=0.002447 Jy/beam ! Clean residual mean=0.000002 rms=0.000593 Jy/beam ! Combined flux in latest and established models = 0.614942 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 174 components and 0.614942 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.236 mas, bmaj=2.623 mas, bpa=29.98 degrees ! Estimated noise=0.568175 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00145273 Jy ! Component: 100 - total flux cleaned = 0.00206053 Jy ! Component: 150 - total flux cleaned = 0.00235241 Jy ! Component: 200 - total flux cleaned = 0.00245514 Jy ! Total flux subtracted in 200 components = 0.00245514 Jy ! Clean residual min=-0.002352 max=0.002502 Jy/beam ! Clean residual mean=-0.000001 rms=0.000649 Jy/beam ! Combined flux in latest and established models = 0.617397 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.62362e-05 Jy ! Component: 100 - total flux cleaned = 4.65998e-05 Jy ! Component: 150 - total flux cleaned = 5.81461e-06 Jy ! Component: 200 - total flux cleaned = 4.24163e-05 Jy ! Total flux subtracted in 200 components = 4.24163e-05 Jy ! Clean residual min=-0.002291 max=0.002399 Jy/beam ! Clean residual mean=-0.000002 rms=0.000627 Jy/beam ! Combined flux in latest and established models = 0.61744 Jy ! Adding 61 model components to the UV plane model. ! The established model now contains 229 components and 0.61744 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.005 mas, bmaj=1.54 mas, bpa=30.26 degrees ! Estimated noise=0.453313 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000453645 Jy ! Component: 100 - total flux cleaned = -0.000521053 Jy ! Component: 150 - total flux cleaned = -0.000457855 Jy ! Component: 200 - total flux cleaned = -0.000397568 Jy ! Total flux subtracted in 200 components = -0.000397568 Jy ! Clean residual min=-0.002570 max=0.002372 Jy/beam ! Clean residual mean=-0.000000 rms=0.000558 Jy/beam ! Combined flux in latest and established models = 0.617042 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 245 components and 0.617042 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061743Jy sigma=0.995615 ! Fit after self-cal, rms=0.061595Jy sigma=0.993962 wmodel J0113+4948_X_a_map.mod ! Writing 245 model components to file: J0113+4948_X_a_map.mod wobs J0113+4948_X_a_uvs.fits ! Writing UV FITS file: J0113+4948_X_a_uvs.fits wwins J0113+4948_X_a_map.win ! wwins: Wrote 10 windows to J0113+4948_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000829201 Jy ! Component: 100 - total flux cleaned = -0.00119497 Jy ! Component: 150 - total flux cleaned = -0.00127358 Jy ! Component: 200 - total flux cleaned = -0.00116232 Jy ! Component: 250 - total flux cleaned = -0.00127335 Jy ! Component: 300 - total flux cleaned = -0.00134442 Jy ! Component: 350 - total flux cleaned = -0.00127281 Jy ! Component: 400 - total flux cleaned = -0.00127229 Jy ! Component: 450 - total flux cleaned = -0.00120351 Jy ! Component: 500 - total flux cleaned = -0.00113629 Jy ! Component: 550 - total flux cleaned = -0.00116955 Jy ! Component: 600 - total flux cleaned = -0.00116913 Jy ! Component: 650 - total flux cleaned = -0.00107145 Jy ! Component: 700 - total flux cleaned = -0.00113542 Jy ! Component: 750 - total flux cleaned = -0.00107216 Jy ! Component: 800 - total flux cleaned = -0.00116596 Jy ! Component: 850 - total flux cleaned = -0.00110402 Jy ! Component: 900 - total flux cleaned = -0.00119586 Jy ! Component: 950 - total flux cleaned = -0.0011353 Jy ! Component: 1000 - total flux cleaned = -0.0011355 Jy ! Component: 1050 - total flux cleaned = -0.00107577 Jy ! Component: 1100 - total flux cleaned = -0.00122363 Jy ! Component: 1150 - total flux cleaned = -0.00116517 Jy ! Component: 1200 - total flux cleaned = -0.00125239 Jy ! Component: 1250 - total flux cleaned = -0.0013392 Jy ! Component: 1300 - total flux cleaned = -0.00145355 Jy ! Component: 1350 - total flux cleaned = -0.00153841 Jy ! Component: 1400 - total flux cleaned = -0.00159449 Jy ! Component: 1450 - total flux cleaned = -0.00159465 Jy ! Component: 1500 - total flux cleaned = -0.00178829 Jy ! Component: 1550 - total flux cleaned = -0.00184331 Jy ! Component: 1600 - total flux cleaned = -0.00189777 Jy ! Component: 1650 - total flux cleaned = -0.00195199 Jy ! Component: 1700 - total flux cleaned = -0.00197853 Jy ! Component: 1750 - total flux cleaned = -0.00192511 Jy ! Component: 1800 - total flux cleaned = -0.00187213 Jy ! Component: 1850 - total flux cleaned = -0.0019511 Jy ! Component: 1900 - total flux cleaned = -0.00205588 Jy ! Component: 1950 - total flux cleaned = -0.00208197 Jy ! Component: 2000 - total flux cleaned = -0.00208187 Jy ! Component: 2050 - total flux cleaned = -0.00200452 Jy ! Component: 2100 - total flux cleaned = -0.00208088 Jy ! Component: 2150 - total flux cleaned = -0.00203052 Jy ! Component: 2200 - total flux cleaned = -0.00203042 Jy ! Component: 2250 - total flux cleaned = -0.00200582 Jy ! Component: 2300 - total flux cleaned = -0.0020805 Jy ! Component: 2350 - total flux cleaned = -0.002006 Jy ! Component: 2400 - total flux cleaned = -0.00215361 Jy ! Component: 2450 - total flux cleaned = -0.00208016 Jy ! Component: 2500 - total flux cleaned = -0.00210466 Jy ! Component: 2550 - total flux cleaned = -0.00195953 Jy ! Component: 2600 - total flux cleaned = -0.00205564 Jy ! Component: 2650 - total flux cleaned = -0.00200784 Jy ! Component: 2700 - total flux cleaned = -0.00200768 Jy ! Component: 2750 - total flux cleaned = -0.00196029 Jy ! Component: 2800 - total flux cleaned = -0.00188979 Jy ! Component: 2850 - total flux cleaned = -0.00193665 Jy ! Component: 2900 - total flux cleaned = -0.00198295 Jy ! Component: 2950 - total flux cleaned = -0.0018441 Jy ! Component: 3000 - total flux cleaned = -0.00189024 Jy ! Component: 3050 - total flux cleaned = -0.00191318 Jy ! Component: 3100 - total flux cleaned = -0.00195881 Jy ! Component: 3150 - total flux cleaned = -0.00191328 Jy ! Component: 3200 - total flux cleaned = -0.00191343 Jy ! Component: 3250 - total flux cleaned = -0.00204815 Jy ! Component: 3300 - total flux cleaned = -0.00202571 Jy ! Component: 3350 - total flux cleaned = -0.00191463 Jy ! Component: 3400 - total flux cleaned = -0.00195881 Jy ! Component: 3450 - total flux cleaned = -0.00193659 Jy ! Component: 3500 - total flux cleaned = -0.00182687 Jy ! Component: 3550 - total flux cleaned = -0.00187044 Jy ! Component: 3600 - total flux cleaned = -0.0018486 Jy ! Component: 3650 - total flux cleaned = -0.00180525 Jy ! Component: 3700 - total flux cleaned = -0.00176241 Jy ! Component: 3750 - total flux cleaned = -0.00176254 Jy ! Component: 3800 - total flux cleaned = -0.00167724 Jy ! Component: 3850 - total flux cleaned = -0.00176223 Jy ! Component: 3900 - total flux cleaned = -0.00171996 Jy ! Component: 3950 - total flux cleaned = -0.00163576 Jy ! Component: 4000 - total flux cleaned = -0.00155201 Jy ! Component: 4050 - total flux cleaned = -0.0014896 Jy ! Total flux subtracted in 4096 components = -0.00138582 Jy ! Clean residual min=-0.001201 max=0.001142 Jy/beam ! Clean residual mean=0.000001 rms=0.000360 Jy/beam ! Combined flux in latest and established models = 0.615656 Jy keep ! Adding 327 model components to the UV plane model. ! The established model now contains 572 components and 0.615656 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J0113+4948_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.005 x 1.54 at 30.26 degrees (North through East) ! Clean map min=-0.0022319 max=0.46803 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J0113+4948_X_a_map.fits wmodel /vlbi/uf001/uvm//J0113+4948_X_a_map.mod ! Writing 572 model components to file: /vlbi/uf001/uvm//J0113+4948_X_a_map.mod wobs /vlbi/uf001/uvm//J0113+4948_X_a_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J0113+4948_X_a_uvs.fits wwins /vlbi/uf001/uvm//J0113+4948_X_a_map.win ! wwins: Wrote 11 windows to /vlbi/uf001/uvm//J0113+4948_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.468033 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000358867 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.230027 0.230027 0.460053 0.920106 1.84021 3.68042 7.36085 14.7217 29.4434 58.8868 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.468 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1304.2 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J0113+4948_X_a_dfm.log closed on Sun Jan 13 20:28:24 2019