! Started logfile: /vlbi/uf001/uvm//J0111-1422_S_a_dfm.log on Sun Jan 13 20:27:47 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uvm//J0111-1422_S_a_uvm.fits
! Reading UV FITS file: /vlbi/uf001/uvm//J0111-1422_S_a_uvm.fits
! AN table 1: 221 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.708253 visibilities/baseline/integration-bin.
! Found source: J0111-1422
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 9861 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0111-1422_S_a]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 287 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 287 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 287 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.001851Jy  sigma=18.317021
! Fit after  self-cal, rms=0.958418Jy  sigma=17.528068
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.34 mas, bmaj=20.31 mas, bpa=-9.126 degrees
! Estimated noise=0.840296 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0340414 Jy
! Component: 100  -  total flux cleaned = 0.0417513 Jy
! Total flux subtracted in 100 components = 0.0417513 Jy
! Clean residual min=-0.003191 max=0.003426 Jy/beam
! Clean residual mean=-0.000019 rms=0.001036 Jy/beam
! Combined flux in latest and established models = 0.0417513 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.0417513 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068570Jy  sigma=1.144367
! Fit after  self-cal, rms=0.067147Jy  sigma=1.116600
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.035 mas, bmaj=21.92 mas, bpa=-10.65 degrees
! Estimated noise=0.40229 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00431673 Jy
! Component: 100  -  total flux cleaned = 0.00577023 Jy
! Component: 150  -  total flux cleaned = 0.00586253 Jy
! Component: 200  -  total flux cleaned = 0.00593207 Jy
! Total flux subtracted in 200 components = 0.00593207 Jy
! Clean residual min=-0.002581 max=0.003166 Jy/beam
! Clean residual mean=-0.000008 rms=0.000873 Jy/beam
! Combined flux in latest and established models = 0.0476834 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 49 components and 0.0476834 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.066877Jy  sigma=1.111771
! Fit after  self-cal, rms=0.066781Jy  sigma=1.111129
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.035 x 21.92 at -10.65 degrees (North through East)
! Clean map  min=-0.0027656  max=0.046192 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        0.97     KP        1.06     LA        0.84     
!   NL        1.13     OV        1.06     PT        1.04     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.84     FD        1.01     KP        1.09     LA        0.86     
!   NL        1.06     OV        0.91     PT        1.07     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        0.94     KP        1.06     LA        0.91     
!   NL        0.97     OV        1.02     PT        1.05     
! 
! 
! Fit before self-cal, rms=0.066781Jy  sigma=1.111129
! Fit after  self-cal, rms=0.065061Jy  sigma=1.106919
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.174 mas, bmaj=21.71 mas, bpa=-10.08 degrees
! Estimated noise=0.398509 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000113808 Jy
! Component: 100  -  total flux cleaned = 0.000283248 Jy
! Component: 150  -  total flux cleaned = 0.000303259 Jy
! Component: 200  -  total flux cleaned = 0.000320043 Jy
! Total flux subtracted in 200 components = 0.000320043 Jy
! Clean residual min=-0.002126 max=0.002379 Jy/beam
! Clean residual mean=-0.000012 rms=0.000652 Jy/beam
! Combined flux in latest and established models = 0.0480034 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 70 components and 0.0480034 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065043Jy  sigma=1.106605
! Fit after  self-cal, rms=0.065137Jy  sigma=1.104258
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065137Jy  sigma=1.104258
! Fit after  self-cal, rms=0.065188Jy  sigma=1.100266
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.232 mas, bmaj=21.47 mas, bpa=-9.586 degrees
! Estimated noise=0.397009 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00066157 Jy
! Component: 100  -  total flux cleaned = 0.000811715 Jy
! Component: 150  -  total flux cleaned = 0.000845999 Jy
! Component: 200  -  total flux cleaned = 0.000846152 Jy
! Total flux subtracted in 200 components = 0.000846152 Jy
! Clean residual min=-0.001825 max=0.001912 Jy/beam
! Clean residual mean=0.000002 rms=0.000474 Jy/beam
! Combined flux in latest and established models = 0.0488496 Jy
selfcal
! Performing phase self-cal
! Adding 48 model components to the UV plane model.
! The established model now contains 103 components and 0.0488496 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065170Jy  sigma=1.100016
! Fit after  self-cal, rms=0.065287Jy  sigma=1.098692
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.11981e-06 Jy
! Component: 100  -  total flux cleaned = -0.000101999 Jy
! Component: 150  -  total flux cleaned = -0.000163367 Jy
! Component: 200  -  total flux cleaned = -0.000216521 Jy
! Total flux subtracted in 200 components = -0.000216521 Jy
! Clean residual min=-0.001702 max=0.002026 Jy/beam
! Clean residual mean=-0.000000 rms=0.000485 Jy/beam
! Combined flux in latest and established models = 0.0486331 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 116 components and 0.0486331 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065277Jy  sigma=1.098547
! Fit after  self-cal, rms=0.065266Jy  sigma=1.098408
! Inverting map 
! Added new window around map position (108, 61).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00175592 Jy
! Component: 100  -  total flux cleaned = 0.0022234 Jy
! Component: 150  -  total flux cleaned = 0.00268233 Jy
! Component: 200  -  total flux cleaned = 0.00302422 Jy
! Total flux subtracted in 200 components = 0.00302422 Jy
! Clean residual min=-0.001342 max=0.001045 Jy/beam
! Clean residual mean=-0.000003 rms=0.000388 Jy/beam
! Combined flux in latest and established models = 0.0516573 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 143 components and 0.0516573 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065209Jy  sigma=1.097532
! Fit after  self-cal, rms=0.065180Jy  sigma=1.097051
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065180Jy  sigma=1.097051
! Fit after  self-cal, rms=0.065055Jy  sigma=1.096779
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.243 mas, bmaj=21.34 mas, bpa=-9.519 degrees
! Estimated noise=0.395417 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00117249 Jy
! Component: 100  -  total flux cleaned = 0.00187288 Jy
! Component: 150  -  total flux cleaned = 0.00224932 Jy
! Component: 200  -  total flux cleaned = 0.00247019 Jy
! Total flux subtracted in 200 components = 0.00247019 Jy
! Clean residual min=-0.001317 max=0.001017 Jy/beam
! Clean residual mean=-0.000003 rms=0.000370 Jy/beam
! Combined flux in latest and established models = 0.0541275 Jy
selfcal
! Performing phase self-cal
! Adding 50 model components to the UV plane model.
! The established model now contains 176 components and 0.0541275 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065024Jy  sigma=1.096357
! Fit after  self-cal, rms=0.065054Jy  sigma=1.095979
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000790602 Jy
! Component: 100  -  total flux cleaned = 0.0010424 Jy
! Component: 150  -  total flux cleaned = 0.001165 Jy
! Component: 200  -  total flux cleaned = 0.00130475 Jy
! Total flux subtracted in 200 components = 0.00130475 Jy
! Clean residual min=-0.001328 max=0.001078 Jy/beam
! Clean residual mean=-0.000003 rms=0.000375 Jy/beam
! Combined flux in latest and established models = 0.0554322 Jy
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 193 components and 0.0554322 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065039Jy  sigma=1.095770
! Fit after  self-cal, rms=0.065028Jy  sigma=1.095619
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065028Jy  sigma=1.095619
! Fit after  self-cal, rms=0.065062Jy  sigma=1.095514
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.6 mas, bmaj=21.54 mas, bpa=-7.685 degrees
! Estimated noise=0.403143 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000739099 Jy
! Component: 100  -  total flux cleaned = 0.00118194 Jy
! Component: 150  -  total flux cleaned = 0.00141512 Jy
! Component: 200  -  total flux cleaned = 0.00159707 Jy
! Total flux subtracted in 200 components = 0.00159707 Jy
! Clean residual min=-0.001408 max=0.001062 Jy/beam
! Clean residual mean=-0.000004 rms=0.000395 Jy/beam
! Combined flux in latest and established models = 0.0570293 Jy
selfcal
! Performing phase self-cal
! Adding 45 model components to the UV plane model.
! The established model now contains 206 components and 0.0570293 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065050Jy  sigma=1.095324
! Fit after  self-cal, rms=0.065050Jy  sigma=1.095229
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000448452 Jy
! Component: 100  -  total flux cleaned = 0.000711949 Jy
! Component: 150  -  total flux cleaned = 0.000837414 Jy
! Component: 200  -  total flux cleaned = 0.000900512 Jy
! Total flux subtracted in 200 components = 0.000900512 Jy
! Clean residual min=-0.001384 max=0.001137 Jy/beam
! Clean residual mean=-0.000004 rms=0.000395 Jy/beam
! Combined flux in latest and established models = 0.0579298 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 218 components and 0.0579298 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065043Jy  sigma=1.095126
! Fit after  self-cal, rms=0.065037Jy  sigma=1.095088
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=9.25 mas, bmaj=21.29 mas, bpa=-9.459 degrees
! Estimated noise=0.395339 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.25 x 21.29 at -9.459 degrees (North through East)
! Clean map  min=-0.0018706  max=0.045737 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.554 mas, bmaj=19.6 mas, bpa=-7.533 degrees
! Estimated noise=0.826728 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0353409 Jy
! Component: 100  -  total flux cleaned = 0.0434788 Jy
! Component: 150  -  total flux cleaned = 0.0477673 Jy
! Component: 200  -  total flux cleaned = 0.0506754 Jy
! Total flux subtracted in 200 components = 0.0506754 Jy
! Clean residual min=-0.003549 max=0.003076 Jy/beam
! Clean residual mean=-0.000007 rms=0.000998 Jy/beam
! Combined flux in latest and established models = 0.0506754 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 28 model components to the UV plane model.
! The established model now contains 28 components and 0.0506754 Jy
! Inverting map and beam 
! Estimated beam: bmin=9.25 mas, bmaj=21.29 mas, bpa=-9.459 degrees
! Estimated noise=0.395339 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00271334 Jy
! Component: 100  -  total flux cleaned = 0.00427739 Jy
! Component: 150  -  total flux cleaned = 0.0053045 Jy
! Component: 200  -  total flux cleaned = 0.00610961 Jy
! Total flux subtracted in 200 components = 0.00610961 Jy
! Clean residual min=-0.001757 max=0.001404 Jy/beam
! Clean residual mean=-0.000002 rms=0.000496 Jy/beam
! Combined flux in latest and established models = 0.056785 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 55 components and 0.056785 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.6 mas, bmaj=21.54 mas, bpa=-7.685 degrees
! Estimated noise=0.403143 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000698375 Jy
! Component: 100  -  total flux cleaned = 0.00120327 Jy
! Component: 150  -  total flux cleaned = 0.0014832 Jy
! Component: 200  -  total flux cleaned = 0.00164686 Jy
! Total flux subtracted in 200 components = 0.00164686 Jy
! Clean residual min=-0.001602 max=0.001323 Jy/beam
! Clean residual mean=-0.000003 rms=0.000455 Jy/beam
! Combined flux in latest and established models = 0.0584318 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000122249 Jy
! Component: 100  -  total flux cleaned = 0.000254913 Jy
! Component: 150  -  total flux cleaned = 0.000355906 Jy
! Component: 200  -  total flux cleaned = 0.000430543 Jy
! Total flux subtracted in 200 components = 0.000430543 Jy
! Clean residual min=-0.001438 max=0.001237 Jy/beam
! Clean residual mean=-0.000003 rms=0.000424 Jy/beam
! Combined flux in latest and established models = 0.0588624 Jy
! Adding 63 model components to the UV plane model.
! The established model now contains 109 components and 0.0588624 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=9.25 mas, bmaj=21.29 mas, bpa=-9.459 degrees
! Estimated noise=0.395339 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.3803e-05 Jy
! Component: 100  -  total flux cleaned = 6.92538e-05 Jy
! Component: 150  -  total flux cleaned = 6.93398e-05 Jy
! Component: 200  -  total flux cleaned = 0.000128247 Jy
! Total flux subtracted in 200 components = 0.000128247 Jy
! Clean residual min=-0.001280 max=0.001093 Jy/beam
! Clean residual mean=-0.000002 rms=0.000375 Jy/beam
! Combined flux in latest and established models = 0.0589906 Jy
selfcal
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 140 components and 0.0589906 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065035Jy  sigma=1.095147
! Fit after  self-cal, rms=0.065026Jy  sigma=1.095040
wmodel J0111-1422_S_a_map.mod
! Writing 140 model components to file: J0111-1422_S_a_map.mod
wobs   J0111-1422_S_a_uvs.fits
! Writing UV FITS file: J0111-1422_S_a_uvs.fits
wwins  J0111-1422_S_a_map.win
! wwins: Wrote 2 windows to J0111-1422_S_a_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000549231 Jy
! Component: 100  -  total flux cleaned = -0.000708103 Jy
! Component: 150  -  total flux cleaned = -0.000799807 Jy
! Component: 200  -  total flux cleaned = -0.000849253 Jy
! Component: 250  -  total flux cleaned = -0.000940218 Jy
! Component: 300  -  total flux cleaned = -0.00101257 Jy
! Component: 350  -  total flux cleaned = -0.00110872 Jy
! Component: 400  -  total flux cleaned = -0.00121334 Jy
! Component: 450  -  total flux cleaned = -0.0012759 Jy
! Component: 500  -  total flux cleaned = -0.0013359 Jy
! Component: 550  -  total flux cleaned = -0.00137048 Jy
! Component: 600  -  total flux cleaned = -0.00143672 Jy
! Component: 650  -  total flux cleaned = -0.00152157 Jy
! Component: 700  -  total flux cleaned = -0.00160409 Jy
! Component: 750  -  total flux cleaned = -0.0017242 Jy
! Component: 800  -  total flux cleaned = -0.00182158 Jy
! Component: 850  -  total flux cleaned = -0.00193522 Jy
! Component: 900  -  total flux cleaned = -0.00199989 Jy
! Component: 950  -  total flux cleaned = -0.00210801 Jy
! Component: 1000  -  total flux cleaned = -0.0021782 Jy
! Component: 1050  -  total flux cleaned = -0.0022126 Jy
! Component: 1100  -  total flux cleaned = -0.00230494 Jy
! Component: 1150  -  total flux cleaned = -0.00232945 Jy
! Component: 1200  -  total flux cleaned = -0.00241029 Jy
! Component: 1250  -  total flux cleaned = -0.00244978 Jy
! Component: 1300  -  total flux cleaned = -0.00249657 Jy
! Component: 1350  -  total flux cleaned = -0.00258056 Jy
! Component: 1400  -  total flux cleaned = -0.00261053 Jy
! Component: 1450  -  total flux cleaned = -0.00266241 Jy
! Component: 1500  -  total flux cleaned = -0.0027278 Jy
! Component: 1550  -  total flux cleaned = -0.00278478 Jy
! Component: 1600  -  total flux cleaned = -0.00282695 Jy
! Component: 1650  -  total flux cleaned = -0.00286837 Jy
! Component: 1700  -  total flux cleaned = -0.00292283 Jy
! Component: 1750  -  total flux cleaned = -0.00293619 Jy
! Component: 1800  -  total flux cleaned = -0.00297594 Jy
! Component: 1850  -  total flux cleaned = -0.00299561 Jy
! Component: 1900  -  total flux cleaned = -0.00301506 Jy
! Component: 1950  -  total flux cleaned = -0.00305982 Jy
! Component: 2000  -  total flux cleaned = -0.00307236 Jy
! Component: 2050  -  total flux cleaned = -0.00309113 Jy
! Component: 2100  -  total flux cleaned = -0.00312221 Jy
! Component: 2150  -  total flux cleaned = -0.00313442 Jy
! Component: 2200  -  total flux cleaned = -0.00316478 Jy
! Component: 2250  -  total flux cleaned = -0.0031828 Jy
! Component: 2300  -  total flux cleaned = -0.00320659 Jy
! Component: 2350  -  total flux cleaned = -0.00321253 Jy
! Component: 2400  -  total flux cleaned = -0.00322418 Jy
! Component: 2450  -  total flux cleaned = -0.00325319 Jy
! Component: 2500  -  total flux cleaned = -0.00325318 Jy
! Component: 2550  -  total flux cleaned = -0.00326458 Jy
! Component: 2600  -  total flux cleaned = -0.00327019 Jy
! Component: 2650  -  total flux cleaned = -0.00327585 Jy
! Component: 2700  -  total flux cleaned = -0.00328704 Jy
! Component: 2750  -  total flux cleaned = -0.00331466 Jy
! Component: 2800  -  total flux cleaned = -0.00333665 Jy
! Component: 2850  -  total flux cleaned = -0.00335304 Jy
! Component: 2900  -  total flux cleaned = -0.00339635 Jy
! Component: 2950  -  total flux cleaned = -0.00341244 Jy
! Component: 3000  -  total flux cleaned = -0.00343909 Jy
! Component: 3050  -  total flux cleaned = -0.00344972 Jy
! Component: 3100  -  total flux cleaned = -0.00349186 Jy
! Component: 3150  -  total flux cleaned = -0.00352331 Jy
! Component: 3200  -  total flux cleaned = -0.00357021 Jy
! Component: 3250  -  total flux cleaned = -0.00360656 Jy
! Component: 3300  -  total flux cleaned = -0.00365297 Jy
! Component: 3350  -  total flux cleaned = -0.00368375 Jy
! Component: 3400  -  total flux cleaned = -0.00371441 Jy
! Component: 3450  -  total flux cleaned = -0.00374493 Jy
! Component: 3500  -  total flux cleaned = -0.00379047 Jy
! Component: 3550  -  total flux cleaned = -0.00380562 Jy
! Component: 3600  -  total flux cleaned = -0.0038408 Jy
! Component: 3650  -  total flux cleaned = -0.00387585 Jy
! Component: 3700  -  total flux cleaned = -0.00390582 Jy
! Component: 3750  -  total flux cleaned = -0.00394071 Jy
! Component: 3800  -  total flux cleaned = -0.00395064 Jy
! Component: 3850  -  total flux cleaned = -0.00397054 Jy
! Component: 3900  -  total flux cleaned = -0.00398546 Jy
! Component: 3950  -  total flux cleaned = -0.00401031 Jy
! Component: 4000  -  total flux cleaned = -0.00403014 Jy
! Component: 4050  -  total flux cleaned = -0.00405495 Jy
! Total flux subtracted in 4096 components = -0.00406485 Jy
! Clean residual min=-0.000310 max=0.000288 Jy/beam
! Clean residual mean=0.000001 rms=0.000106 Jy/beam
! Combined flux in latest and established models = 0.0549258 Jy
keep
! Adding 424 model components to the UV plane model.
! The established model now contains 564 components and 0.0549258 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uvm//J0111-1422_S_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.25 x 21.29 at -9.459 degrees (North through East)
! Clean map  min=-0.001085  max=0.045529 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uvm//J0111-1422_S_a_map.fits
wmodel /vlbi/uf001/uvm//J0111-1422_S_a_map.mod
! Writing 564 model components to file: /vlbi/uf001/uvm//J0111-1422_S_a_map.mod
wobs   /vlbi/uf001/uvm//J0111-1422_S_a_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uvm//J0111-1422_S_a_uvs.fits
wwins  /vlbi/uf001/uvm//J0111-1422_S_a_map.win
! wwins: Wrote 3 windows to /vlbi/uf001/uvm//J0111-1422_S_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0455289 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000103677 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.683151 0.683151 1.3663 2.7326 5.46521 10.9304 21.8608 43.7217 87.4433
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.045 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  439.141 
quit
! Quitting program
! Log file /vlbi/uf001/uvm//J0111-1422_S_a_dfm.log closed on Sun Jan 13 20:27:52 2019