! Started logfile: /vlbi/uf001/uva//J0110-1648_X_dfm.log on Sun Jan 13 20:53:29 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /vlbi/uf001/uva//J0110-1648_X_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0110-1648_X_uva.fits
! AN table 1: 38 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.9 visibilities/baseline/integration-bin.
! Found source: J0110-1648
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 18468 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0110-1648_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.004025Jy  sigma=20.719536
! Fit after  self-cal, rms=0.964616Jy  sigma=19.918498
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6319 mas, bmaj=1.519 mas, bpa=-3.749 degrees
! Estimated noise=0.505798 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0265342 Jy
! Component: 100  -  total flux cleaned = 0.0332238 Jy
! Total flux subtracted in 100 components = 0.0332238 Jy
! Clean residual min=-0.002876 max=0.003553 Jy/beam
! Clean residual mean=0.000001 rms=0.000751 Jy/beam
! Combined flux in latest and established models = 0.0332238 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.0332238 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072774Jy  sigma=1.337544
! Fit after  self-cal, rms=0.071125Jy  sigma=1.300416
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.005429 Jy
! Component: 100  -  total flux cleaned = 0.00803861 Jy
! Total flux subtracted in 100 components = 0.00803861 Jy
! Clean residual min=-0.002868 max=0.003378 Jy/beam
! Clean residual mean=0.000000 rms=0.000689 Jy/beam
! Combined flux in latest and established models = 0.0412624 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 15 components and 0.0412624 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070436Jy  sigma=1.284748
! Fit after  self-cal, rms=0.070401Jy  sigma=1.284211
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.825 mas, bmaj=1.917 mas, bpa=-3.545 degrees
! Estimated noise=0.261454 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.6, -0.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00428441 Jy
! Component: 100  -  total flux cleaned = 0.00646631 Jy
! Component: 150  -  total flux cleaned = 0.00778439 Jy
! Component: 200  -  total flux cleaned = 0.00869465 Jy
! Total flux subtracted in 200 components = 0.00869465 Jy
! Clean residual min=-0.001780 max=0.001958 Jy/beam
! Clean residual mean=-0.000001 rms=0.000426 Jy/beam
! Combined flux in latest and established models = 0.0499571 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 26 components and 0.0499571 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070158Jy  sigma=1.278171
! Fit after  self-cal, rms=0.070112Jy  sigma=1.277374
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.825 x 1.917 at -3.545 degrees (North through East)
! Clean map  min=-0.0017336  max=0.040248 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.07     HN        1.16     KP        0.93     
!   LA        1.09     MK        1.11     NL        1.01     OV        0.97     
!   PT        0.93     SC        1.06     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.99     HN        1.07     KP        1.09     
!   LA        1.12     MK        1.14     NL        1.21     OV        0.99     
!   PT        0.86     SC        0.91     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        1.04     HN        0.99     KP        1.01     
!   LA        1.09     MK        1.25     NL        1.12     OV        0.85     
!   PT        0.93     SC        0.98     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.97     HN        1.13     KP        1.05     
!   LA        1.03     MK        1.10     NL        1.02     OV        0.91     
!   PT        0.89     SC        1.13     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.02     KP        0.95     
!   LA        1.23     MK        1.24     NL        1.07     OV        0.90     
!   PT        0.97     SC        0.98     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        1.06     HN        1.07     KP        1.00     
!   LA        1.05     MK        0.95     NL        1.00     OV        1.04     
!   PT        0.86     SC        0.97     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.00     HN        0.95     KP        1.07     
!   LA        1.02     MK        1.24     NL        1.14     OV        0.93     
!   PT        0.85     SC        0.93     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.09     HN        1.03     KP        0.94     
!   LA        1.10     MK        1.04     NL        1.08     OV        0.95     
!   PT        0.94     SC        1.02     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        0.94     HN        0.85     KP        1.09     
!   LA        1.27     MK        0.87     NL        1.06     OV        0.95     
!   PT        0.86     SC        1.03     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.10     HN        1.07     KP        0.95     
!   LA        0.83     MK        0.87     NL        0.98     OV        0.93     
!   PT        0.87     SC        1.01     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.97     HN        0.97     KP        0.98     
!   LA        1.11     MK        0.94     NL        1.07     OV        0.87     
!   PT        0.81     SC        0.99     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.80     FD        1.04     HN        0.86     KP        0.99     
!   LA        0.96     MK        0.74     NL        1.14     OV        0.96     
!   PT        0.78     SC        1.03     
! 
! 
! Fit before self-cal, rms=0.070112Jy  sigma=1.277374
! Fit after  self-cal, rms=0.070400Jy  sigma=1.272059
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8306 mas, bmaj=1.931 mas, bpa=-3.181 degrees
! Estimated noise=0.259856 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000429787 Jy
! Component: 100  -  total flux cleaned = 0.00019968 Jy
! Component: 150  -  total flux cleaned = -2.51683e-05 Jy
! Component: 200  -  total flux cleaned = -9.84479e-05 Jy
! Total flux subtracted in 200 components = -9.84479e-05 Jy
! Clean residual min=-0.001373 max=0.001538 Jy/beam
! Clean residual mean=-0.000001 rms=0.000328 Jy/beam
! Combined flux in latest and established models = 0.0498586 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 36 components and 0.0498586 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070367Jy  sigma=1.271405
! Fit after  self-cal, rms=0.070443Jy  sigma=1.269728
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070443Jy  sigma=1.269728
! Fit after  self-cal, rms=0.071170Jy  sigma=1.267222
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8301 mas, bmaj=1.934 mas, bpa=-3.11 degrees
! Estimated noise=0.25876 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000144744 Jy
! Component: 100  -  total flux cleaned = -8.30302e-05 Jy
! Component: 150  -  total flux cleaned = -0.000155244 Jy
! Component: 200  -  total flux cleaned = -0.000217426 Jy
! Total flux subtracted in 200 components = -0.000217426 Jy
! Clean residual min=-0.001193 max=0.001431 Jy/beam
! Clean residual mean=-0.000001 rms=0.000302 Jy/beam
! Combined flux in latest and established models = 0.0496412 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 39 components and 0.0496412 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071148Jy  sigma=1.266798
! Fit after  self-cal, rms=0.071214Jy  sigma=1.266194
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-23.6, 24.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00124282 Jy
! Component: 100  -  total flux cleaned = 0.00158258 Jy
! Component: 150  -  total flux cleaned = 0.00165086 Jy
! Component: 200  -  total flux cleaned = 0.00173313 Jy
! Total flux subtracted in 200 components = 0.00173313 Jy
! Clean residual min=-0.001121 max=0.001245 Jy/beam
! Clean residual mean=-0.000001 rms=0.000288 Jy/beam
! Combined flux in latest and established models = 0.0513743 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 52 components and 0.0513743 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071186Jy  sigma=1.265630
! Fit after  self-cal, rms=0.071170Jy  sigma=1.265428
! Inverting map 
! Added new window around map position (-49.6, -33.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00100478 Jy
! Component: 100  -  total flux cleaned = 0.00120622 Jy
! Component: 150  -  total flux cleaned = 0.0013219 Jy
! Component: 200  -  total flux cleaned = 0.00136467 Jy
! Total flux subtracted in 200 components = 0.00136467 Jy
! Clean residual min=-0.001112 max=0.001222 Jy/beam
! Clean residual mean=-0.000001 rms=0.000284 Jy/beam
! Combined flux in latest and established models = 0.052739 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 62 components and 0.052739 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071144Jy  sigma=1.264946
! Fit after  self-cal, rms=0.071140Jy  sigma=1.264819
! Inverting map 
! Added new window around map position (-48, 43.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00112844 Jy
! Component: 100  -  total flux cleaned = 0.00136066 Jy
! Component: 150  -  total flux cleaned = 0.00138393 Jy
! Component: 200  -  total flux cleaned = 0.00145018 Jy
! Total flux subtracted in 200 components = 0.00145018 Jy
! Clean residual min=-0.001129 max=0.001157 Jy/beam
! Clean residual mean=-0.000001 rms=0.000282 Jy/beam
! Combined flux in latest and established models = 0.0541892 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 71 components and 0.0541891 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071113Jy  sigma=1.264334
! Fit after  self-cal, rms=0.071095Jy  sigma=1.264123
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071095Jy  sigma=1.264123
! Fit after  self-cal, rms=0.070715Jy  sigma=1.263800
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8277 mas, bmaj=1.935 mas, bpa=-3.372 degrees
! Estimated noise=0.257435 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000960594 Jy
! Component: 100  -  total flux cleaned = 0.00125593 Jy
! Component: 150  -  total flux cleaned = 0.00132437 Jy
! Component: 200  -  total flux cleaned = 0.00136687 Jy
! Total flux subtracted in 200 components = 0.00136687 Jy
! Clean residual min=-0.001078 max=0.001080 Jy/beam
! Clean residual mean=-0.000001 rms=0.000274 Jy/beam
! Combined flux in latest and established models = 0.055556 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 77 components and 0.055556 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070693Jy  sigma=1.263406
! Fit after  self-cal, rms=0.070684Jy  sigma=1.263259
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000493358 Jy
! Component: 100  -  total flux cleaned = 0.00058496 Jy
! Component: 150  -  total flux cleaned = 0.000605515 Jy
! Component: 200  -  total flux cleaned = 0.000625613 Jy
! Total flux subtracted in 200 components = 0.000625613 Jy
! Clean residual min=-0.001108 max=0.001101 Jy/beam
! Clean residual mean=-0.000001 rms=0.000274 Jy/beam
! Combined flux in latest and established models = 0.0561816 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 80 components and 0.0561816 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070669Jy  sigma=1.263000
! Fit after  self-cal, rms=0.070653Jy  sigma=1.262907
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070653Jy  sigma=1.262907
! Fit after  self-cal, rms=0.070298Jy  sigma=1.262808
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.085 mas, bmaj=3.954 mas, bpa=2.043 degrees
! Estimated noise=0.339892 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000567919 Jy
! Component: 100  -  total flux cleaned = 0.000799808 Jy
! Component: 150  -  total flux cleaned = 0.000925295 Jy
! Component: 200  -  total flux cleaned = 0.00104928 Jy
! Total flux subtracted in 200 components = 0.00104928 Jy
! Clean residual min=-0.001235 max=0.001181 Jy/beam
! Clean residual mean=-0.000001 rms=0.000329 Jy/beam
! Combined flux in latest and established models = 0.0572309 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 92 components and 0.0572309 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070295Jy  sigma=1.262759
! Fit after  self-cal, rms=0.070283Jy  sigma=1.262686
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000238408 Jy
! Component: 100  -  total flux cleaned = 0.000383797 Jy
! Component: 150  -  total flux cleaned = 0.000510374 Jy
! Component: 200  -  total flux cleaned = 0.00061001 Jy
! Total flux subtracted in 200 components = 0.00061001 Jy
! Clean residual min=-0.001237 max=0.001162 Jy/beam
! Clean residual mean=-0.000001 rms=0.000328 Jy/beam
! Combined flux in latest and established models = 0.0578409 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 96 components and 0.0578409 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070282Jy  sigma=1.262687
! Fit after  self-cal, rms=0.070280Jy  sigma=1.262660
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8264 mas, bmaj=1.935 mas, bpa=-3.489 degrees
! Estimated noise=0.256787 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8264 x 1.935 at -3.489 degrees (North through East)
! Clean map  min=-0.0016481  max=0.039555 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6287 mas, bmaj=1.528 mas, bpa=-3.974 degrees
! Estimated noise=0.496851 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0277206 Jy
! Component: 100  -  total flux cleaned = 0.0355705 Jy
! Component: 150  -  total flux cleaned = 0.0403347 Jy
! Component: 200  -  total flux cleaned = 0.0431984 Jy
! Total flux subtracted in 200 components = 0.0431984 Jy
! Clean residual min=-0.002991 max=0.002984 Jy/beam
! Clean residual mean=0.000000 rms=0.000672 Jy/beam
! Combined flux in latest and established models = 0.0431984 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.0431984 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8264 mas, bmaj=1.935 mas, bpa=-3.489 degrees
! Estimated noise=0.256787 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00445693 Jy
! Component: 100  -  total flux cleaned = 0.007186 Jy
! Component: 150  -  total flux cleaned = 0.00919398 Jy
! Component: 200  -  total flux cleaned = 0.0103986 Jy
! Total flux subtracted in 200 components = 0.0103986 Jy
! Clean residual min=-0.001425 max=0.001686 Jy/beam
! Clean residual mean=-0.000000 rms=0.000342 Jy/beam
! Combined flux in latest and established models = 0.0535971 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 31 components and 0.0535971 Jy
! Inverting map 
! Added new window around map position (-11.4, 8.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00105361 Jy
! Component: 100  -  total flux cleaned = 0.00139876 Jy
! Component: 150  -  total flux cleaned = 0.00166666 Jy
! Component: 200  -  total flux cleaned = 0.00199702 Jy
! Total flux subtracted in 200 components = 0.00199702 Jy
! Clean residual min=-0.001213 max=0.001355 Jy/beam
! Clean residual mean=-0.000001 rms=0.000311 Jy/beam
! Combined flux in latest and established models = 0.0555941 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 47 components and 0.0555941 Jy
! Inverting map 
! Added new window around map position (8.8, 36.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00125654 Jy
! Component: 100  -  total flux cleaned = 0.0014065 Jy
! Component: 150  -  total flux cleaned = 0.00154351 Jy
! Component: 200  -  total flux cleaned = 0.00164042 Jy
! Total flux subtracted in 200 components = 0.00164042 Jy
! Clean residual min=-0.001169 max=0.001227 Jy/beam
! Clean residual mean=-0.000001 rms=0.000286 Jy/beam
! Combined flux in latest and established models = 0.0572345 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 64 components and 0.0572345 Jy
! Inverting map 
! Added new window around map position (0.8, 1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00057199 Jy
! Component: 100  -  total flux cleaned = 0.000634504 Jy
! Component: 150  -  total flux cleaned = 0.000749117 Jy
! Component: 200  -  total flux cleaned = 0.000884228 Jy
! Total flux subtracted in 200 components = 0.000884228 Jy
! Clean residual min=-0.001135 max=0.001116 Jy/beam
! Clean residual mean=-0.000001 rms=0.000271 Jy/beam
! Combined flux in latest and established models = 0.0581187 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 79 components and 0.0581187 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.085 mas, bmaj=3.954 mas, bpa=2.043 degrees
! Estimated noise=0.339892 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000506405 Jy
! Component: 100  -  total flux cleaned = 0.000757317 Jy
! Component: 150  -  total flux cleaned = 0.000971698 Jy
! Component: 200  -  total flux cleaned = 0.00110731 Jy
! Total flux subtracted in 200 components = 0.00110731 Jy
! Clean residual min=-0.001129 max=0.001215 Jy/beam
! Clean residual mean=-0.000001 rms=0.000293 Jy/beam
! Combined flux in latest and established models = 0.059226 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.01425e-05 Jy
! Component: 100  -  total flux cleaned = 7.32781e-05 Jy
! Component: 150  -  total flux cleaned = 9.9941e-05 Jy
! Component: 200  -  total flux cleaned = 0.000124683 Jy
! Total flux subtracted in 200 components = 0.000124683 Jy
! Clean residual min=-0.001100 max=0.001198 Jy/beam
! Clean residual mean=-0.000001 rms=0.000286 Jy/beam
! Combined flux in latest and established models = 0.0593507 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 114 components and 0.0593507 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8264 mas, bmaj=1.935 mas, bpa=-3.489 degrees
! Estimated noise=0.256787 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.58568e-05 Jy
! Component: 100  -  total flux cleaned = -0.000161273 Jy
! Component: 150  -  total flux cleaned = -0.000184844 Jy
! Component: 200  -  total flux cleaned = -0.000206738 Jy
! Total flux subtracted in 200 components = -0.000206738 Jy
! Clean residual min=-0.001029 max=0.001083 Jy/beam
! Clean residual mean=-0.000001 rms=0.000256 Jy/beam
! Combined flux in latest and established models = 0.059144 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 126 components and 0.059144 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070247Jy  sigma=1.262088
! Fit after  self-cal, rms=0.070219Jy  sigma=1.261791
wmodel J0110-1648_X_map.mod
! Writing 126 model components to file: J0110-1648_X_map.mod
wobs   J0110-1648_X_uvs.fits
! Writing UV FITS file: J0110-1648_X_uvs.fits
wwins  J0110-1648_X_map.win
! wwins: Wrote 8 windows to J0110-1648_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000187103 Jy
! Component: 100  -  total flux cleaned = -0.000226211 Jy
! Component: 150  -  total flux cleaned = -0.000117548 Jy
! Component: 200  -  total flux cleaned = -9.98879e-05 Jy
! Component: 250  -  total flux cleaned = -8.28003e-05 Jy
! Component: 300  -  total flux cleaned = -0.000116288 Jy
! Component: 350  -  total flux cleaned = -0.00011672 Jy
! Component: 400  -  total flux cleaned = -0.000100979 Jy
! Component: 450  -  total flux cleaned = -8.50565e-05 Jy
! Component: 500  -  total flux cleaned = -2.34909e-05 Jy
! Component: 550  -  total flux cleaned = -2.36135e-05 Jy
! Component: 600  -  total flux cleaned = -8.61705e-06 Jy
! Component: 650  -  total flux cleaned = 5.98019e-06 Jy
! Component: 700  -  total flux cleaned = 5.79921e-06 Jy
! Component: 750  -  total flux cleaned = 5.61296e-06 Jy
! Component: 800  -  total flux cleaned = -3.67435e-05 Jy
! Component: 850  -  total flux cleaned = -6.4206e-05 Jy
! Component: 900  -  total flux cleaned = -6.39297e-05 Jy
! Component: 950  -  total flux cleaned = -9.10232e-05 Jy
! Component: 1000  -  total flux cleaned = -0.000131296 Jy
! Component: 1050  -  total flux cleaned = -0.000184212 Jy
! Component: 1100  -  total flux cleaned = -0.000223316 Jy
! Component: 1150  -  total flux cleaned = -0.000249252 Jy
! Component: 1200  -  total flux cleaned = -0.000300349 Jy
! Component: 1250  -  total flux cleaned = -0.00036379 Jy
! Component: 1300  -  total flux cleaned = -0.00037624 Jy
! Component: 1350  -  total flux cleaned = -0.000413716 Jy
! Component: 1400  -  total flux cleaned = -0.000450916 Jy
! Component: 1450  -  total flux cleaned = -0.000511916 Jy
! Component: 1500  -  total flux cleaned = -0.000572272 Jy
! Component: 1550  -  total flux cleaned = -0.000560441 Jy
! Component: 1600  -  total flux cleaned = -0.000608104 Jy
! Component: 1650  -  total flux cleaned = -0.000655027 Jy
! Component: 1700  -  total flux cleaned = -0.000689922 Jy
! Component: 1750  -  total flux cleaned = -0.000678376 Jy
! Component: 1800  -  total flux cleaned = -0.000724158 Jy
! Component: 1850  -  total flux cleaned = -0.00071275 Jy
! Component: 1900  -  total flux cleaned = -0.000757843 Jy
! Component: 1950  -  total flux cleaned = -0.000780071 Jy
! Component: 2000  -  total flux cleaned = -0.000802215 Jy
! Component: 2050  -  total flux cleaned = -0.000857352 Jy
! Component: 2100  -  total flux cleaned = -0.000879115 Jy
! Component: 2150  -  total flux cleaned = -0.00094431 Jy
! Component: 2200  -  total flux cleaned = -0.000998177 Jy
! Component: 2250  -  total flux cleaned = -0.00103024 Jy
! Component: 2300  -  total flux cleaned = -0.00103022 Jy
! Component: 2350  -  total flux cleaned = -0.00108307 Jy
! Component: 2400  -  total flux cleaned = -0.00113543 Jy
! Component: 2450  -  total flux cleaned = -0.00116669 Jy
! Component: 2500  -  total flux cleaned = -0.00124943 Jy
! Component: 2550  -  total flux cleaned = -0.00131106 Jy
! Component: 2600  -  total flux cleaned = -0.00137225 Jy
! Component: 2650  -  total flux cleaned = -0.00139244 Jy
! Component: 2700  -  total flux cleaned = -0.00145289 Jy
! Component: 2750  -  total flux cleaned = -0.00148286 Jy
! Component: 2800  -  total flux cleaned = -0.00153262 Jy
! Component: 2850  -  total flux cleaned = -0.00155239 Jy
! Component: 2900  -  total flux cleaned = -0.00157193 Jy
! Component: 2950  -  total flux cleaned = -0.00156222 Jy
! Component: 3000  -  total flux cleaned = -0.00161069 Jy
! Component: 3050  -  total flux cleaned = -0.00159139 Jy
! Component: 3100  -  total flux cleaned = -0.00162979 Jy
! Component: 3150  -  total flux cleaned = -0.00164894 Jy
! Component: 3200  -  total flux cleaned = -0.00172461 Jy
! Component: 3250  -  total flux cleaned = -0.00169647 Jy
! Component: 3300  -  total flux cleaned = -0.00170587 Jy
! Component: 3350  -  total flux cleaned = -0.00178012 Jy
! Component: 3400  -  total flux cleaned = -0.00178917 Jy
! Component: 3450  -  total flux cleaned = -0.00178911 Jy
! Component: 3500  -  total flux cleaned = -0.00180733 Jy
! Component: 3550  -  total flux cleaned = -0.00178922 Jy
! Component: 3600  -  total flux cleaned = -0.00185233 Jy
! Component: 3650  -  total flux cleaned = -0.0018792 Jy
! Component: 3700  -  total flux cleaned = -0.00189702 Jy
! Component: 3750  -  total flux cleaned = -0.00193256 Jy
! Component: 3800  -  total flux cleaned = -0.00196773 Jy
! Component: 3850  -  total flux cleaned = -0.00196777 Jy
! Component: 3900  -  total flux cleaned = -0.00200258 Jy
! Component: 3950  -  total flux cleaned = -0.00202856 Jy
! Component: 4000  -  total flux cleaned = -0.00201991 Jy
! Component: 4050  -  total flux cleaned = -0.0020285 Jy
! Total flux subtracted in 4096 components = -0.00201143 Jy
! Clean residual min=-0.000556 max=0.000436 Jy/beam
! Clean residual mean=-0.000001 rms=0.000146 Jy/beam
! Combined flux in latest and established models = 0.0571326 Jy
keep
! Adding 298 model components to the UV plane model.
! The established model now contains 423 components and 0.0571325 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0110-1648_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8264 x 1.935 at -3.489 degrees (North through East)
! Clean map  min=-0.00083315  max=0.039355 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0110-1648_X_map.fits
wmodel /vlbi/uf001/uva//J0110-1648_X_map.mod
! Writing 423 model components to file: /vlbi/uf001/uva//J0110-1648_X_map.mod
wobs   /vlbi/uf001/uva//J0110-1648_X_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0110-1648_X_uvs.fits
wwins  /vlbi/uf001/uva//J0110-1648_X_map.win
! wwins: Wrote 9 windows to /vlbi/uf001/uva//J0110-1648_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.039355 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000145708 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.11072 1.11072 2.22144 4.44289 8.88578 17.7716 35.5431 71.0862
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.039 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  270.094 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0110-1648_X_dfm.log closed on Sun Jan 13 20:53:35 2019