! Started logfile: /vlbi/uf001/uva//J0110-0741_X_dfm.log on Sun Jan 13 20:53:18 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J0110-0741_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J0110-0741_X_uva.fits ! AN table 1: 42 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.891005 visibilities/baseline/integration-bin. ! Found source: J0110-0741 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 20208 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0110-0741_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 81 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 81 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 81 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 81 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 81 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 81 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 81 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 81 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 81 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 81 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 81 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 81 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.126861Jy sigma=21.466296 ! Fit after self-cal, rms=0.490016Jy sigma=9.229545 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6757 mas, bmaj=1.641 mas, bpa=-1.117 degrees ! Estimated noise=0.439131 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.390146 Jy ! Component: 100 - total flux cleaned = 0.476253 Jy ! Total flux subtracted in 100 components = 0.476253 Jy ! Clean residual min=-0.019297 max=0.033335 Jy/beam ! Clean residual mean=0.000013 rms=0.003218 Jy/beam ! Combined flux in latest and established models = 0.476253 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.476253 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.109294Jy sigma=2.025159 ! Fit after self-cal, rms=0.109283Jy sigma=2.024904 ! Inverting map ! Added new window around map position (1.8, 0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0349232 Jy ! Component: 100 - total flux cleaned = 0.0566741 Jy ! Total flux subtracted in 100 components = 0.0566741 Jy ! Clean residual min=-0.014438 max=0.021226 Jy/beam ! Clean residual mean=0.000011 rms=0.002450 Jy/beam ! Combined flux in latest and established models = 0.532927 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 21 components and 0.532927 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088956Jy sigma=1.626345 ! Fit after self-cal, rms=0.088466Jy sigma=1.616292 ! Inverting map ! Added new window around map position (-1.8, -0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0189881 Jy ! Component: 100 - total flux cleaned = 0.0331079 Jy ! Total flux subtracted in 100 components = 0.0331079 Jy ! Clean residual min=-0.010581 max=0.013171 Jy/beam ! Clean residual mean=0.000010 rms=0.002059 Jy/beam ! Combined flux in latest and established models = 0.566035 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 32 components and 0.566035 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080504Jy sigma=1.459407 ! Fit after self-cal, rms=0.080433Jy sigma=1.458297 ! Inverting map ! Added new window around map position (-1.8, -4.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.013765 Jy ! Component: 100 - total flux cleaned = 0.0244538 Jy ! Total flux subtracted in 100 components = 0.0244538 Jy ! Clean residual min=-0.009410 max=0.011039 Jy/beam ! Clean residual mean=0.000009 rms=0.001841 Jy/beam ! Combined flux in latest and established models = 0.590489 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 42 components and 0.590489 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076117Jy sigma=1.370730 ! Fit after self-cal, rms=0.076052Jy sigma=1.369501 ! Inverting map ! Added new window around map position (2.8, 0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0110415 Jy ! Component: 100 - total flux cleaned = 0.0193566 Jy ! Total flux subtracted in 100 components = 0.0193566 Jy ! Clean residual min=-0.008552 max=0.009208 Jy/beam ! Clean residual mean=0.000009 rms=0.001693 Jy/beam ! Combined flux in latest and established models = 0.609846 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 47 components and 0.609846 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073361Jy sigma=1.317277 ! Fit after self-cal, rms=0.073315Jy sigma=1.316620 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8484 mas, bmaj=1.963 mas, bpa=-1.282 degrees ! Estimated noise=0.289555 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0129191 Jy ! Component: 100 - total flux cleaned = 0.0219523 Jy ! Component: 150 - total flux cleaned = 0.0285991 Jy ! Component: 200 - total flux cleaned = 0.0313482 Jy ! Total flux subtracted in 200 components = 0.0313482 Jy ! Clean residual min=-0.008565 max=0.009572 Jy/beam ! Clean residual mean=0.000011 rms=0.001952 Jy/beam ! Combined flux in latest and established models = 0.641194 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 73 components and 0.641194 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070408Jy sigma=1.253673 ! Fit after self-cal, rms=0.070360Jy sigma=1.252623 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8484 x 1.963 at -1.282 degrees (North through East) ! Clean map min=-0.0080628 max=0.50498 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00 HN 1.02 KP 1.02 ! LA 0.98 MK 1.00 NL 1.04 OV 0.91 ! PT 0.96 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.01 HN 0.99 KP 1.01 ! LA 0.98 MK 1.01 NL 1.05 OV 0.91 ! PT 0.95 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.01 HN 0.99 KP 1.02 ! LA 0.99 MK 1.02 NL 1.04 OV 0.91 ! PT 0.95 SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00 HN 1.00 KP 1.02 ! LA 0.99 MK 1.01 NL 1.04 OV 0.92 ! PT 0.95 SC 0.99 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.01 HN 1.00 KP 1.02 ! LA 0.99 MK 1.02 NL 1.04 OV 0.92 ! PT 0.96 SC 1.00 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.02 HN 1.01 KP 1.01 ! LA 0.98 MK 1.00 NL 1.04 OV 0.92 ! PT 0.96 SC 0.99 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.01 HN 1.01 KP 1.02 ! LA 0.99 MK 1.01 NL 1.04 OV 0.91 ! PT 0.96 SC 1.00 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.01 HN 1.00 KP 1.03 ! LA 0.99 MK 1.02 NL 1.03 OV 0.92 ! PT 0.95 SC 1.00 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00 HN 1.01 KP 1.01 ! LA 0.99 MK 1.01 NL 1.05 OV 0.92 ! PT 0.96 SC 1.01 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.01 HN 1.03 KP 1.03 ! LA 0.99 MK 1.00 NL 1.04 OV 0.92 ! PT 0.97 SC 0.99 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.02 HN 1.02 KP 1.01 ! LA 0.97 MK 1.02 NL 1.07 OV 0.93 ! PT 0.97 SC 1.00 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.01 HN 1.01 KP 1.03 ! LA 1.00 MK 1.01 NL 1.04 OV 0.92 ! PT 0.95 SC 1.00 ! ! ! Fit before self-cal, rms=0.070360Jy sigma=1.252623 ! Fit after self-cal, rms=0.064216Jy sigma=1.115813 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8511 mas, bmaj=1.977 mas, bpa=-1.072 degrees ! Estimated noise=0.288749 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0049284 Jy ! Component: 100 - total flux cleaned = -0.0071909 Jy ! Component: 150 - total flux cleaned = -0.00866571 Jy ! Component: 200 - total flux cleaned = -0.00940496 Jy ! Total flux subtracted in 200 components = -0.00940496 Jy ! Clean residual min=-0.004179 max=0.005101 Jy/beam ! Clean residual mean=0.000004 rms=0.001050 Jy/beam ! Combined flux in latest and established models = 0.631789 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 81 components and 0.631789 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063554Jy sigma=1.103441 ! Fit after self-cal, rms=0.063560Jy sigma=1.102974 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063560Jy sigma=1.102974 ! Fit after self-cal, rms=0.061550Jy sigma=1.060594 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8505 mas, bmaj=1.977 mas, bpa=-1.106 degrees ! Estimated noise=0.288635 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00305901 Jy ! Component: 100 - total flux cleaned = -0.00382294 Jy ! Component: 150 - total flux cleaned = -0.00439038 Jy ! Component: 200 - total flux cleaned = -0.00455952 Jy ! Total flux subtracted in 200 components = -0.00455952 Jy ! Clean residual min=-0.002900 max=0.003128 Jy/beam ! Clean residual mean=0.000002 rms=0.000668 Jy/beam ! Combined flux in latest and established models = 0.627229 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 91 components and 0.627229 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061125Jy sigma=1.053885 ! Fit after self-cal, rms=0.061128Jy sigma=1.053606 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (12, -7.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00209286 Jy ! Component: 100 - total flux cleaned = 0.00209869 Jy ! Component: 150 - total flux cleaned = 0.00195223 Jy ! Component: 200 - total flux cleaned = 0.00181911 Jy ! Total flux subtracted in 200 components = 0.00181911 Jy ! Clean residual min=-0.002783 max=0.002564 Jy/beam ! Clean residual mean=0.000002 rms=0.000622 Jy/beam ! Combined flux in latest and established models = 0.629049 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 108 components and 0.629048 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060882Jy sigma=1.049781 ! Fit after self-cal, rms=0.060875Jy sigma=1.049580 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060875Jy sigma=1.049580 ! Fit after self-cal, rms=0.060769Jy sigma=1.047596 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8499 mas, bmaj=1.977 mas, bpa=-1.062 degrees ! Estimated noise=0.288411 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00190017 Jy ! Component: 100 - total flux cleaned = -0.00214473 Jy ! Component: 150 - total flux cleaned = -0.00228707 Jy ! Component: 200 - total flux cleaned = -0.00228764 Jy ! Total flux subtracted in 200 components = -0.00228764 Jy ! Clean residual min=-0.002399 max=0.002161 Jy/beam ! Clean residual mean=0.000003 rms=0.000562 Jy/beam ! Combined flux in latest and established models = 0.626761 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 113 components and 0.626761 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060569Jy sigma=1.044373 ! Fit after self-cal, rms=0.060568Jy sigma=1.044292 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.46723e-05 Jy ! Component: 100 - total flux cleaned = -0.000127995 Jy ! Component: 150 - total flux cleaned = -0.000129212 Jy ! Component: 200 - total flux cleaned = -0.000282657 Jy ! Total flux subtracted in 200 components = -0.000282657 Jy ! Clean residual min=-0.002314 max=0.002080 Jy/beam ! Clean residual mean=0.000003 rms=0.000546 Jy/beam ! Combined flux in latest and established models = 0.626478 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 117 components and 0.626478 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060468Jy sigma=1.042627 ! Fit after self-cal, rms=0.060467Jy sigma=1.042589 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060467Jy sigma=1.042589 ! Fit after self-cal, rms=0.060421Jy sigma=1.041843 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.212 mas, bmaj=3.731 mas, bpa=4.516 degrees ! Estimated noise=0.379219 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00182372 Jy ! Component: 100 - total flux cleaned = -0.00170654 Jy ! Component: 150 - total flux cleaned = -0.00155973 Jy ! Component: 200 - total flux cleaned = -0.00147431 Jy ! Total flux subtracted in 200 components = -0.00147431 Jy ! Clean residual min=-0.002668 max=0.002687 Jy/beam ! Clean residual mean=0.000004 rms=0.000717 Jy/beam ! Combined flux in latest and established models = 0.625004 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 135 components and 0.625004 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060358Jy sigma=1.041085 ! Fit after self-cal, rms=0.060356Jy sigma=1.040980 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.41372e-05 Jy ! Component: 100 - total flux cleaned = 0.000122583 Jy ! Component: 150 - total flux cleaned = 9.02803e-05 Jy ! Component: 200 - total flux cleaned = 6.17302e-05 Jy ! Total flux subtracted in 200 components = 6.17302e-05 Jy ! Clean residual min=-0.002657 max=0.002646 Jy/beam ! Clean residual mean=0.000004 rms=0.000707 Jy/beam ! Combined flux in latest and established models = 0.625066 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 139 components and 0.625066 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060332Jy sigma=1.040618 ! Fit after self-cal, rms=0.060331Jy sigma=1.040573 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8494 mas, bmaj=1.977 mas, bpa=-1.03 degrees ! Estimated noise=0.288224 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8494 x 1.977 at -1.03 degrees (North through East) ! Clean map min=-0.002992 max=0.50347 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060331Jy sigma=1.040573 ! Fit after self-cal, rms=0.057112Jy sigma=0.968248 ! Inverting map and beam ! Estimated beam: bmin=0.8493 mas, bmaj=1.977 mas, bpa=-1.026 degrees ! Estimated noise=0.288311 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00127118 Jy ! Component: 100 - total flux cleaned = -0.00161523 Jy ! Component: 150 - total flux cleaned = -0.0017646 Jy ! Component: 200 - total flux cleaned = -0.00190243 Jy ! Total flux subtracted in 200 components = -0.00190243 Jy ! Clean residual min=-0.002087 max=0.001927 Jy/beam ! Clean residual mean=0.000003 rms=0.000478 Jy/beam ! Combined flux in latest and established models = 0.623163 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 147 components and 0.623163 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057006Jy sigma=0.966320 ! Fit after self-cal, rms=0.057003Jy sigma=0.966295 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.36755e-05 Jy ! Component: 100 - total flux cleaned = -0.00016584 Jy ! Component: 150 - total flux cleaned = -0.000241523 Jy ! Component: 200 - total flux cleaned = -0.000276998 Jy ! Total flux subtracted in 200 components = -0.000276998 Jy ! Clean residual min=-0.002050 max=0.001904 Jy/beam ! Clean residual mean=0.000003 rms=0.000471 Jy/beam ! Combined flux in latest and established models = 0.622886 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 157 components and 0.622886 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056955Jy sigma=0.965373 ! Fit after self-cal, rms=0.056954Jy sigma=0.965361 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056954Jy sigma=0.965361 ! Fit after self-cal, rms=0.056927Jy sigma=0.964883 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6748 mas, bmaj=1.65 mas, bpa=-0.8264 degrees ! Estimated noise=0.437926 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.389011 Jy ! Component: 100 - total flux cleaned = 0.474388 Jy ! Component: 150 - total flux cleaned = 0.507897 Jy ! Component: 200 - total flux cleaned = 0.529944 Jy ! Total flux subtracted in 200 components = 0.529944 Jy ! Clean residual min=-0.007726 max=0.013038 Jy/beam ! Clean residual mean=0.000004 rms=0.001527 Jy/beam ! Combined flux in latest and established models = 0.529944 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.529944 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8489 mas, bmaj=1.977 mas, bpa=-0.9968 degrees ! Estimated noise=0.288146 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.8, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.02738 Jy ! Component: 100 - total flux cleaned = 0.0442585 Jy ! Component: 150 - total flux cleaned = 0.0559619 Jy ! Component: 200 - total flux cleaned = 0.0643598 Jy ! Total flux subtracted in 200 components = 0.0643598 Jy ! Clean residual min=-0.002778 max=0.005244 Jy/beam ! Clean residual mean=0.000005 rms=0.000878 Jy/beam ! Combined flux in latest and established models = 0.594304 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 55 components and 0.594304 Jy ! Inverting map ! Added new window around map position (-1, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00637429 Jy ! Component: 100 - total flux cleaned = 0.0112744 Jy ! Component: 150 - total flux cleaned = 0.0151448 Jy ! Component: 200 - total flux cleaned = 0.0182455 Jy ! Total flux subtracted in 200 components = 0.0182455 Jy ! Clean residual min=-0.002167 max=0.002823 Jy/beam ! Clean residual mean=0.000003 rms=0.000549 Jy/beam ! Combined flux in latest and established models = 0.61255 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 84 components and 0.61255 Jy ! Inverting map ! Added new window around map position (3, 3.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00282898 Jy ! Component: 100 - total flux cleaned = 0.00499354 Jy ! Component: 150 - total flux cleaned = 0.00682234 Jy ! Component: 200 - total flux cleaned = 0.00784163 Jy ! Total flux subtracted in 200 components = 0.00784163 Jy ! Clean residual min=-0.002000 max=0.001815 Jy/beam ! Clean residual mean=0.000003 rms=0.000472 Jy/beam ! Combined flux in latest and established models = 0.620391 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 114 components and 0.620391 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.214 mas, bmaj=3.732 mas, bpa=4.589 degrees ! Estimated noise=0.379237 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00198583 Jy ! Component: 100 - total flux cleaned = 0.00288654 Jy ! Component: 150 - total flux cleaned = 0.00327809 Jy ! Component: 200 - total flux cleaned = 0.0034256 Jy ! Total flux subtracted in 200 components = 0.0034256 Jy ! Clean residual min=-0.002393 max=0.002301 Jy/beam ! Clean residual mean=0.000004 rms=0.000637 Jy/beam ! Combined flux in latest and established models = 0.623817 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.58976e-05 Jy ! Component: 100 - total flux cleaned = 0.000125389 Jy ! Component: 150 - total flux cleaned = 0.000180765 Jy ! Component: 200 - total flux cleaned = 0.000280075 Jy ! Total flux subtracted in 200 components = 0.000280075 Jy ! Clean residual min=-0.002331 max=0.002353 Jy/beam ! Clean residual mean=0.000004 rms=0.000625 Jy/beam ! Combined flux in latest and established models = 0.624097 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 150 components and 0.624097 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8489 mas, bmaj=1.977 mas, bpa=-0.9968 degrees ! Estimated noise=0.288146 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.87683e-05 Jy ! Component: 100 - total flux cleaned = 6.54983e-05 Jy ! Component: 150 - total flux cleaned = 6.34154e-05 Jy ! Component: 200 - total flux cleaned = 0.000184113 Jy ! Total flux subtracted in 200 components = 0.000184113 Jy ! Clean residual min=-0.001852 max=0.001739 Jy/beam ! Clean residual mean=0.000002 rms=0.000435 Jy/beam ! Combined flux in latest and established models = 0.624281 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 164 components and 0.624281 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056816Jy sigma=0.962435 ! Fit after self-cal, rms=0.056802Jy sigma=0.962181 wmodel J0110-0741_X_map.mod ! Writing 164 model components to file: J0110-0741_X_map.mod wobs J0110-0741_X_uvs.fits ! Writing UV FITS file: J0110-0741_X_uvs.fits wwins J0110-0741_X_map.win ! wwins: Wrote 9 windows to J0110-0741_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00023626 Jy ! Component: 100 - total flux cleaned = -0.000297884 Jy ! Component: 150 - total flux cleaned = -0.000358338 Jy ! Component: 200 - total flux cleaned = -0.00041554 Jy ! Component: 250 - total flux cleaned = -0.000249696 Jy ! Component: 300 - total flux cleaned = -0.000115406 Jy ! Component: 350 - total flux cleaned = 6.84487e-05 Jy ! Component: 400 - total flux cleaned = 0.000196601 Jy ! Component: 450 - total flux cleaned = 0.000246793 Jy ! Component: 500 - total flux cleaned = 0.000370161 Jy ! Component: 550 - total flux cleaned = 0.00041916 Jy ! Component: 600 - total flux cleaned = 0.000562497 Jy ! Component: 650 - total flux cleaned = 0.00065654 Jy ! Component: 700 - total flux cleaned = 0.000748703 Jy ! Component: 750 - total flux cleaned = 0.000817208 Jy ! Component: 800 - total flux cleaned = 0.000928955 Jy ! Component: 850 - total flux cleaned = 0.000950558 Jy ! Component: 900 - total flux cleaned = 0.000971437 Jy ! Component: 950 - total flux cleaned = 0.000971223 Jy ! Component: 1000 - total flux cleaned = 0.00109805 Jy ! Component: 1050 - total flux cleaned = 0.00109792 Jy ! Component: 1100 - total flux cleaned = 0.00116009 Jy ! Component: 1150 - total flux cleaned = 0.00124203 Jy ! Component: 1200 - total flux cleaned = 0.00132302 Jy ! Component: 1250 - total flux cleaned = 0.00140299 Jy ! Component: 1300 - total flux cleaned = 0.00152145 Jy ! Component: 1350 - total flux cleaned = 0.00150151 Jy ! Component: 1400 - total flux cleaned = 0.00152108 Jy ! Component: 1450 - total flux cleaned = 0.00154023 Jy ! Component: 1500 - total flux cleaned = 0.00163541 Jy ! Component: 1550 - total flux cleaned = 0.00167287 Jy ! Component: 1600 - total flux cleaned = 0.00165453 Jy ! Component: 1650 - total flux cleaned = 0.00172815 Jy ! Component: 1700 - total flux cleaned = 0.00174646 Jy ! Component: 1750 - total flux cleaned = 0.00178284 Jy ! Component: 1800 - total flux cleaned = 0.00181869 Jy ! Component: 1850 - total flux cleaned = 0.00183657 Jy ! Component: 1900 - total flux cleaned = 0.00187175 Jy ! Component: 1950 - total flux cleaned = 0.0018717 Jy ! Component: 2000 - total flux cleaned = 0.00180275 Jy ! Component: 2050 - total flux cleaned = 0.00192253 Jy ! Component: 2100 - total flux cleaned = 0.00187162 Jy ! Component: 2150 - total flux cleaned = 0.00188864 Jy ! Component: 2200 - total flux cleaned = 0.00198866 Jy ! Component: 2250 - total flux cleaned = 0.00195533 Jy ! Component: 2300 - total flux cleaned = 0.00192255 Jy ! Component: 2350 - total flux cleaned = 0.00193877 Jy ! Component: 2400 - total flux cleaned = 0.00197101 Jy ! Component: 2450 - total flux cleaned = 0.00198695 Jy ! Component: 2500 - total flux cleaned = 0.00192333 Jy ! Component: 2550 - total flux cleaned = 0.00206533 Jy ! Component: 2600 - total flux cleaned = 0.00211221 Jy ! Component: 2650 - total flux cleaned = 0.00211211 Jy ! Component: 2700 - total flux cleaned = 0.00217379 Jy ! Component: 2750 - total flux cleaned = 0.00211267 Jy ! Component: 2800 - total flux cleaned = 0.00217326 Jy ! Component: 2850 - total flux cleaned = 0.0022033 Jy ! Component: 2900 - total flux cleaned = 0.00218832 Jy ! Component: 2950 - total flux cleaned = 0.0022033 Jy ! Component: 3000 - total flux cleaned = 0.00220326 Jy ! Component: 3050 - total flux cleaned = 0.00224729 Jy ! Component: 3100 - total flux cleaned = 0.0022618 Jy ! Component: 3150 - total flux cleaned = 0.00224729 Jy ! Component: 3200 - total flux cleaned = 0.00223288 Jy ! Component: 3250 - total flux cleaned = 0.0022328 Jy ! Component: 3300 - total flux cleaned = 0.00221857 Jy ! Component: 3350 - total flux cleaned = 0.00223267 Jy ! Component: 3400 - total flux cleaned = 0.00221853 Jy ! Component: 3450 - total flux cleaned = 0.00220463 Jy ! Component: 3500 - total flux cleaned = 0.00220464 Jy ! Component: 3550 - total flux cleaned = 0.00219092 Jy ! Component: 3600 - total flux cleaned = 0.00217746 Jy ! Component: 3650 - total flux cleaned = 0.00219093 Jy ! Component: 3700 - total flux cleaned = 0.00217744 Jy ! Component: 3750 - total flux cleaned = 0.0021241 Jy ! Component: 3800 - total flux cleaned = 0.00215074 Jy ! Component: 3850 - total flux cleaned = 0.00213748 Jy ! Component: 3900 - total flux cleaned = 0.00211138 Jy ! Component: 3950 - total flux cleaned = 0.00211131 Jy ! Component: 4000 - total flux cleaned = 0.00207248 Jy ! Component: 4050 - total flux cleaned = 0.00207258 Jy ! Total flux subtracted in 4096 components = 0.00202143 Jy ! Clean residual min=-0.000674 max=0.000787 Jy/beam ! Clean residual mean=0.000000 rms=0.000225 Jy/beam ! Combined flux in latest and established models = 0.626303 Jy keep ! Adding 330 model components to the UV plane model. ! The established model now contains 494 components and 0.626303 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J0110-0741_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8489 x 1.977 at -0.9968 degrees (North through East) ! Clean map min=-0.0012552 max=0.50493 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J0110-0741_X_map.fits wmodel /vlbi/uf001/uva//J0110-0741_X_map.mod ! Writing 494 model components to file: /vlbi/uf001/uva//J0110-0741_X_map.mod wobs /vlbi/uf001/uva//J0110-0741_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J0110-0741_X_uvs.fits wwins /vlbi/uf001/uva//J0110-0741_X_map.win ! wwins: Wrote 10 windows to /vlbi/uf001/uva//J0110-0741_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.504926 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000225924 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.134232 0.134232 0.268464 0.536928 1.07386 2.14771 4.29542 8.59085 17.1817 34.3634 68.7268 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.504 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2234.94 quit ! Quitting program ! Log file /vlbi/uf001/uva//J0110-0741_X_dfm.log closed on Sun Jan 13 20:53:23 2019