! Started logfile: /vlbi/uf001/uva//J0110+6805_X_dfm.log on Sun Jan 13 20:52:53 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J0110+6805_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J0110+6805_X_uva.fits ! AN table 1: 87 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.982631 visibilities/baseline/integration-bin. ! Found source: J0110+6805 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 46164 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0110+6805_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.022648Jy sigma=19.650370 ! Fit after self-cal, rms=0.822204Jy sigma=15.602081 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.792 mas, bmaj=0.8468 mas, bpa=-41.88 degrees ! Estimated noise=0.399659 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.143504 Jy ! Component: 100 - total flux cleaned = 0.177555 Jy ! Total flux subtracted in 100 components = 0.177555 Jy ! Clean residual min=-0.009315 max=0.015617 Jy/beam ! Clean residual mean=-0.000019 rms=0.002014 Jy/beam ! Combined flux in latest and established models = 0.177555 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.177555 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.101018Jy sigma=1.659326 ! Fit after self-cal, rms=0.100899Jy sigma=1.658166 ! Inverting map ! Added new window around map position (-2.2, 1.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.017417 Jy ! Component: 100 - total flux cleaned = 0.0285849 Jy ! Total flux subtracted in 100 components = 0.0285849 Jy ! Clean residual min=-0.007932 max=0.010975 Jy/beam ! Clean residual mean=-0.000019 rms=0.001732 Jy/beam ! Combined flux in latest and established models = 0.20614 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 13 components and 0.20614 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.097644Jy sigma=1.550412 ! Fit after self-cal, rms=0.097511Jy sigma=1.548372 ! Inverting map ! Added new window around map position (-17.2, -3.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0103762 Jy ! Component: 100 - total flux cleaned = 0.0174353 Jy ! Total flux subtracted in 100 components = 0.0174353 Jy ! Clean residual min=-0.008212 max=0.009194 Jy/beam ! Clean residual mean=-0.000018 rms=0.001614 Jy/beam ! Combined flux in latest and established models = 0.223575 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 22 components and 0.223575 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.096098Jy sigma=1.510304 ! Fit after self-cal, rms=0.095978Jy sigma=1.508365 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.038 mas, bmaj=1.105 mas, bpa=-47.4 degrees ! Estimated noise=0.179562 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0108196 Jy ! Component: 100 - total flux cleaned = 0.0175925 Jy ! Component: 150 - total flux cleaned = 0.0225472 Jy ! Component: 200 - total flux cleaned = 0.0264052 Jy ! Total flux subtracted in 200 components = 0.0264052 Jy ! Clean residual min=-0.008902 max=0.012565 Jy/beam ! Clean residual mean=-0.000098 rms=0.002200 Jy/beam ! Combined flux in latest and established models = 0.24998 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 31 components and 0.24998 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.094964Jy sigma=1.469968 ! Fit after self-cal, rms=0.094800Jy sigma=1.467435 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.038 x 1.105 at -47.4 degrees (North through East) ! Clean map min=-0.0084721 max=0.18428 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.00 HN 0.97 KP 0.93 ! LA 1.11 MK 1.01 NL 1.14 OV 0.90 ! PT 0.86 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.01 HN 0.97 KP 0.95 ! LA 1.10 MK 1.03 NL 1.11 OV 0.89 ! PT 0.88 SC 0.95 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.01 HN 0.99 KP 0.93 ! LA 1.09 MK 1.01 NL 1.12 OV 0.89 ! PT 0.86 SC 0.96 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.00 HN 0.97 KP 0.94 ! LA 1.06 MK 1.04 NL 1.11 OV 0.90 ! PT 0.87 SC 0.96 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.99 HN 0.97 KP 0.94 ! LA 1.08 MK 1.02 NL 1.10 OV 0.91 ! PT 0.87 SC 0.95 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.01 HN 0.98 KP 0.95 ! LA 1.09 MK 1.04 NL 1.11 OV 0.90 ! PT 0.87 SC 0.95 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.00 HN 0.98 KP 0.95 ! LA 1.09 MK 1.04 NL 1.13 OV 0.88 ! PT 0.87 SC 0.94 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.01 HN 0.96 KP 0.95 ! LA 1.07 MK 1.06 NL 1.12 OV 0.89 ! PT 0.88 SC 0.94 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.99 HN 0.98 KP 0.95 ! LA 1.08 MK 1.05 NL 1.11 OV 0.89 ! PT 0.87 SC 0.94 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.01 HN 0.97 KP 0.96 ! LA 1.08 MK 1.02 NL 1.15 OV 0.90 ! PT 0.86 SC 0.94 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.99 HN 0.97 KP 0.96 ! LA 1.07 MK 1.02 NL 1.13 OV 0.88 ! PT 0.88 SC 0.95 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.99 HN 0.96 KP 0.97 ! LA 1.10 MK 1.02 NL 1.09 OV 0.90 ! PT 0.89 SC 0.96 ! ! ! Fit before self-cal, rms=0.094800Jy sigma=1.467435 ! Fit after self-cal, rms=0.092860Jy sigma=1.401836 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.043 mas, bmaj=1.106 mas, bpa=-46.25 degrees ! Estimated noise=0.175421 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00406686 Jy ! Component: 100 - total flux cleaned = -0.00465177 Jy ! Component: 150 - total flux cleaned = -0.00464352 Jy ! Component: 200 - total flux cleaned = -0.0044821 Jy ! Total flux subtracted in 200 components = -0.0044821 Jy ! Clean residual min=-0.007455 max=0.009382 Jy/beam ! Clean residual mean=-0.000084 rms=0.001861 Jy/beam ! Combined flux in latest and established models = 0.245498 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 40 components and 0.245498 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.092183Jy sigma=1.399489 ! Fit after self-cal, rms=0.092325Jy sigma=1.398847 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.092325Jy sigma=1.398847 ! Fit after self-cal, rms=0.158611Jy sigma=1.267351 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.041 mas, bmaj=1.112 mas, bpa=-49.22 degrees ! Estimated noise=0.177012 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00460934 Jy ! Component: 100 - total flux cleaned = -0.00529891 Jy ! Component: 150 - total flux cleaned = -0.0053857 Jy ! Component: 200 - total flux cleaned = -0.00520544 Jy ! Total flux subtracted in 200 components = -0.00520544 Jy ! Clean residual min=-0.003270 max=0.006236 Jy/beam ! Clean residual mean=-0.000020 rms=0.000906 Jy/beam ! Combined flux in latest and established models = 0.240293 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 54 components and 0.240293 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.158421Jy sigma=1.258637 ! Fit after self-cal, rms=0.159309Jy sigma=1.256266 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-8, 2.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00605984 Jy ! Component: 100 - total flux cleaned = 0.00968205 Jy ! Component: 150 - total flux cleaned = 0.0115108 Jy ! Component: 200 - total flux cleaned = 0.0129875 Jy ! Total flux subtracted in 200 components = 0.0129875 Jy ! Clean residual min=-0.003086 max=0.004669 Jy/beam ! Clean residual mean=-0.000015 rms=0.000740 Jy/beam ! Combined flux in latest and established models = 0.25328 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 74 components and 0.25328 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.159027Jy sigma=1.242986 ! Fit after self-cal, rms=0.158985Jy sigma=1.242438 ! Inverting map ! Added new window around map position (-5.6, 2.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00438487 Jy ! Component: 100 - total flux cleaned = 0.00671979 Jy ! Component: 150 - total flux cleaned = 0.00833995 Jy ! Component: 200 - total flux cleaned = 0.00952792 Jy ! Total flux subtracted in 200 components = 0.00952792 Jy ! Clean residual min=-0.002639 max=0.003375 Jy/beam ! Clean residual mean=-0.000010 rms=0.000637 Jy/beam ! Combined flux in latest and established models = 0.262808 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 93 components and 0.262808 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.158868Jy sigma=1.235287 ! Fit after self-cal, rms=0.158863Jy sigma=1.234825 ! Inverting map ! Added new window around map position (-10.8, 3.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00371473 Jy ! Component: 100 - total flux cleaned = 0.00593193 Jy ! Component: 150 - total flux cleaned = 0.00761515 Jy ! Component: 200 - total flux cleaned = 0.00887015 Jy ! Total flux subtracted in 200 components = 0.00887015 Jy ! Clean residual min=-0.002527 max=0.003060 Jy/beam ! Clean residual mean=-0.000009 rms=0.000550 Jy/beam ! Combined flux in latest and established models = 0.271678 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 112 components and 0.271678 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.158747Jy sigma=1.229606 ! Fit after self-cal, rms=0.158693Jy sigma=1.229273 ! Inverting map ! Added new window around map position (-3.6, 2.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00284726 Jy ! Component: 100 - total flux cleaned = 0.00451849 Jy ! Component: 150 - total flux cleaned = 0.00558831 Jy ! Component: 200 - total flux cleaned = 0.00619423 Jy ! Total flux subtracted in 200 components = 0.00619423 Jy ! Clean residual min=-0.002493 max=0.002177 Jy/beam ! Clean residual mean=-0.000006 rms=0.000500 Jy/beam ! Combined flux in latest and established models = 0.277873 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 134 components and 0.277873 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.158635Jy sigma=1.226117 ! Fit after self-cal, rms=0.158577Jy sigma=1.225835 ! Inverting map ! Added new window around map position (17.8, 4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00227395 Jy ! Component: 100 - total flux cleaned = 0.0032436 Jy ! Component: 150 - total flux cleaned = 0.00393377 Jy ! Component: 200 - total flux cleaned = 0.0044302 Jy ! Total flux subtracted in 200 components = 0.0044302 Jy ! Clean residual min=-0.002201 max=0.002074 Jy/beam ! Clean residual mean=-0.000004 rms=0.000461 Jy/beam ! Combined flux in latest and established models = 0.282303 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 157 components and 0.282303 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.158528Jy sigma=1.223948 ! Fit after self-cal, rms=0.158511Jy sigma=1.223672 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.158511Jy sigma=1.223672 ! Fit after self-cal, rms=0.165037Jy sigma=1.221523 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.04 mas, bmaj=1.11 mas, bpa=-48.29 degrees ! Estimated noise=0.176343 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000242894 Jy ! Component: 100 - total flux cleaned = 0.000590685 Jy ! Component: 150 - total flux cleaned = 0.0012812 Jy ! Component: 200 - total flux cleaned = 0.00167029 Jy ! Total flux subtracted in 200 components = 0.00167029 Jy ! Clean residual min=-0.001642 max=0.001871 Jy/beam ! Clean residual mean=-0.000001 rms=0.000394 Jy/beam ! Combined flux in latest and established models = 0.283973 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 168 components and 0.283973 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.165001Jy sigma=1.220029 ! Fit after self-cal, rms=0.165068Jy sigma=1.219821 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6.8, -0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00129719 Jy ! Component: 100 - total flux cleaned = 0.00167886 Jy ! Component: 150 - total flux cleaned = 0.0019499 Jy ! Component: 200 - total flux cleaned = 0.00204033 Jy ! Total flux subtracted in 200 components = 0.00204033 Jy ! Clean residual min=-0.001647 max=0.001764 Jy/beam ! Clean residual mean=0.000001 rms=0.000377 Jy/beam ! Combined flux in latest and established models = 0.286013 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 186 components and 0.286013 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.165034Jy sigma=1.218818 ! Fit after self-cal, rms=0.165031Jy sigma=1.218750 ! Inverting map ! Added new window around map position (1.8, -5.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000645964 Jy ! Component: 100 - total flux cleaned = 0.000858881 Jy ! Component: 150 - total flux cleaned = 0.00127806 Jy ! Component: 200 - total flux cleaned = 0.00163078 Jy ! Total flux subtracted in 200 components = 0.00163078 Jy ! Clean residual min=-0.001567 max=0.001399 Jy/beam ! Clean residual mean=0.000001 rms=0.000358 Jy/beam ! Combined flux in latest and established models = 0.287644 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 199 components and 0.287644 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.165008Jy sigma=1.217761 ! Fit after self-cal, rms=0.165002Jy sigma=1.217722 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.165002Jy sigma=1.217722 ! Fit after self-cal, rms=0.167108Jy sigma=1.217291 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.236 mas, bmaj=2.535 mas, bpa=67.06 degrees ! Estimated noise=0.238594 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00131402 Jy ! Component: 100 - total flux cleaned = 0.00205175 Jy ! Component: 150 - total flux cleaned = 0.00251626 Jy ! Component: 200 - total flux cleaned = 0.00279972 Jy ! Total flux subtracted in 200 components = 0.00279972 Jy ! Clean residual min=-0.002361 max=0.002023 Jy/beam ! Clean residual mean=0.000003 rms=0.000564 Jy/beam ! Combined flux in latest and established models = 0.290444 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 210 components and 0.290444 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.167098Jy sigma=1.216946 ! Fit after self-cal, rms=0.167123Jy sigma=1.216830 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.42658e-05 Jy ! Component: 100 - total flux cleaned = 0.000374323 Jy ! Component: 150 - total flux cleaned = 0.000482222 Jy ! Component: 200 - total flux cleaned = 0.000607792 Jy ! Total flux subtracted in 200 components = 0.000607792 Jy ! Clean residual min=-0.002324 max=0.002033 Jy/beam ! Clean residual mean=0.000003 rms=0.000552 Jy/beam ! Combined flux in latest and established models = 0.291052 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 219 components and 0.291052 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.167118Jy sigma=1.216754 ! Fit after self-cal, rms=0.167115Jy sigma=1.216685 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.04 mas, bmaj=1.107 mas, bpa=-47.79 degrees ! Estimated noise=0.176013 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.04 x 1.107 at -47.79 degrees (North through East) ! Clean map min=-0.0013972 max=0.18145 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7915 mas, bmaj=0.8493 mas, bpa=-38.78 degrees ! Estimated noise=0.393549 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.140963 Jy ! Component: 100 - total flux cleaned = 0.175358 Jy ! Component: 150 - total flux cleaned = 0.19343 Jy ! Component: 200 - total flux cleaned = 0.205702 Jy ! Total flux subtracted in 200 components = 0.205702 Jy ! Clean residual min=-0.004178 max=0.009492 Jy/beam ! Clean residual mean=-0.000007 rms=0.000968 Jy/beam ! Combined flux in latest and established models = 0.205702 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.205702 Jy ! Inverting map and beam ! Estimated beam: bmin=1.04 mas, bmaj=1.107 mas, bpa=-47.79 degrees ! Estimated noise=0.176013 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.4, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0144583 Jy ! Component: 100 - total flux cleaned = 0.0232381 Jy ! Component: 150 - total flux cleaned = 0.030225 Jy ! Component: 200 - total flux cleaned = 0.0361876 Jy ! Total flux subtracted in 200 components = 0.0361876 Jy ! Clean residual min=-0.002773 max=0.003680 Jy/beam ! Clean residual mean=-0.000018 rms=0.000792 Jy/beam ! Combined flux in latest and established models = 0.24189 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 55 components and 0.24189 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00513187 Jy ! Component: 100 - total flux cleaned = 0.00960584 Jy ! Component: 150 - total flux cleaned = 0.0135446 Jy ! Component: 200 - total flux cleaned = 0.0170291 Jy ! Total flux subtracted in 200 components = 0.0170291 Jy ! Clean residual min=-0.002095 max=0.002287 Jy/beam ! Clean residual mean=-0.000011 rms=0.000569 Jy/beam ! Combined flux in latest and established models = 0.258919 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 78 components and 0.258919 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.236 mas, bmaj=2.535 mas, bpa=67.06 degrees ! Estimated noise=0.238594 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00602279 Jy ! Component: 100 - total flux cleaned = 0.0104272 Jy ! Component: 150 - total flux cleaned = 0.013931 Jy ! Component: 200 - total flux cleaned = 0.016777 Jy ! Total flux subtracted in 200 components = 0.016777 Jy ! Clean residual min=-0.002931 max=0.002686 Jy/beam ! Clean residual mean=-0.000013 rms=0.000730 Jy/beam ! Combined flux in latest and established models = 0.275696 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00238481 Jy ! Component: 100 - total flux cleaned = 0.00446392 Jy ! Component: 150 - total flux cleaned = 0.00628595 Jy ! Component: 200 - total flux cleaned = 0.00788536 Jy ! Total flux subtracted in 200 components = 0.00788536 Jy ! Clean residual min=-0.002659 max=0.002133 Jy/beam ! Clean residual mean=-0.000006 rms=0.000614 Jy/beam ! Combined flux in latest and established models = 0.283581 Jy ! Adding 135 model components to the UV plane model. ! The established model now contains 194 components and 0.283581 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.04 mas, bmaj=1.107 mas, bpa=-47.79 degrees ! Estimated noise=0.176013 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00196787 Jy ! Component: 100 - total flux cleaned = 0.00305615 Jy ! Component: 150 - total flux cleaned = 0.00406149 Jy ! Component: 200 - total flux cleaned = 0.00497403 Jy ! Total flux subtracted in 200 components = 0.00497403 Jy ! Clean residual min=-0.001553 max=0.001417 Jy/beam ! Clean residual mean=0.000000 rms=0.000346 Jy/beam ! Combined flux in latest and established models = 0.288555 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 215 components and 0.288555 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.167147Jy sigma=1.217697 ! Fit after self-cal, rms=0.167139Jy sigma=1.216881 wmodel J0110+6805_X_map.mod ! Writing 215 model components to file: J0110+6805_X_map.mod wobs J0110+6805_X_uvs.fits ! Writing UV FITS file: J0110+6805_X_uvs.fits wwins J0110+6805_X_map.win ! wwins: Wrote 11 windows to J0110+6805_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000512824 Jy ! Component: 100 - total flux cleaned = -0.000771404 Jy ! Component: 150 - total flux cleaned = -0.000845428 Jy ! Component: 200 - total flux cleaned = -0.000822293 Jy ! Component: 250 - total flux cleaned = -0.000709198 Jy ! Component: 300 - total flux cleaned = -0.000598979 Jy ! Component: 350 - total flux cleaned = -0.000448555 Jy ! Component: 400 - total flux cleaned = -0.00032289 Jy ! Component: 450 - total flux cleaned = -0.000220908 Jy ! Component: 500 - total flux cleaned = -0.000100534 Jy ! Component: 550 - total flux cleaned = -2.62598e-06 Jy ! Component: 600 - total flux cleaned = 5.51375e-05 Jy ! Component: 650 - total flux cleaned = 9.27278e-05 Jy ! Component: 700 - total flux cleaned = 0.000111692 Jy ! Component: 750 - total flux cleaned = 0.000148797 Jy ! Component: 800 - total flux cleaned = 0.000203383 Jy ! Component: 850 - total flux cleaned = 0.000256883 Jy ! Component: 900 - total flux cleaned = 0.000291934 Jy ! Component: 950 - total flux cleaned = 0.000378407 Jy ! Component: 1000 - total flux cleaned = 0.000361292 Jy ! Component: 1050 - total flux cleaned = 0.000327982 Jy ! Component: 1100 - total flux cleaned = 0.000428056 Jy ! Component: 1150 - total flux cleaned = 0.000427933 Jy ! Component: 1200 - total flux cleaned = 0.000411824 Jy ! Component: 1250 - total flux cleaned = 0.000444313 Jy ! Component: 1300 - total flux cleaned = 0.000428272 Jy ! Component: 1350 - total flux cleaned = 0.000365276 Jy ! Component: 1400 - total flux cleaned = 0.000350094 Jy ! Component: 1450 - total flux cleaned = 0.000303844 Jy ! Component: 1500 - total flux cleaned = 0.000334383 Jy ! Component: 1550 - total flux cleaned = 0.000319202 Jy ! Component: 1600 - total flux cleaned = 0.000319026 Jy ! Component: 1650 - total flux cleaned = 0.000245028 Jy ! Component: 1700 - total flux cleaned = 0.000245253 Jy ! Component: 1750 - total flux cleaned = 0.000216408 Jy ! Component: 1800 - total flux cleaned = 0.000259705 Jy ! Component: 1850 - total flux cleaned = 0.000202644 Jy ! Component: 1900 - total flux cleaned = 0.000160105 Jy ! Component: 1950 - total flux cleaned = 0.000188176 Jy ! Component: 2000 - total flux cleaned = 7.6993e-05 Jy ! Component: 2050 - total flux cleaned = 4.94925e-05 Jy ! Component: 2100 - total flux cleaned = 9.0381e-05 Jy ! Component: 2150 - total flux cleaned = -7.22762e-05 Jy ! Component: 2200 - total flux cleaned = -7.23396e-05 Jy ! Component: 2250 - total flux cleaned = -0.000165712 Jy ! Component: 2300 - total flux cleaned = -0.000218634 Jy ! Component: 2350 - total flux cleaned = -0.000205417 Jy ! Component: 2400 - total flux cleaned = -0.000283508 Jy ! Component: 2450 - total flux cleaned = -0.000400022 Jy ! Component: 2500 - total flux cleaned = -0.000399982 Jy ! Component: 2550 - total flux cleaned = -0.00045095 Jy ! Component: 2600 - total flux cleaned = -0.000438329 Jy ! Component: 2650 - total flux cleaned = -0.000476039 Jy ! Component: 2700 - total flux cleaned = -0.000488515 Jy ! Component: 2750 - total flux cleaned = -0.000563017 Jy ! Component: 2800 - total flux cleaned = -0.000575147 Jy ! Component: 2850 - total flux cleaned = -0.000624124 Jy ! Component: 2900 - total flux cleaned = -0.000648385 Jy ! Component: 2950 - total flux cleaned = -0.000624306 Jy ! Component: 3000 - total flux cleaned = -0.000684126 Jy ! Component: 3050 - total flux cleaned = -0.000755591 Jy ! Component: 3100 - total flux cleaned = -0.000708322 Jy ! Component: 3150 - total flux cleaned = -0.00073192 Jy ! Component: 3200 - total flux cleaned = -0.000778589 Jy ! Component: 3250 - total flux cleaned = -0.000825113 Jy ! Component: 3300 - total flux cleaned = -0.000836655 Jy ! Component: 3350 - total flux cleaned = -0.000836569 Jy ! Component: 3400 - total flux cleaned = -0.000870762 Jy ! Component: 3450 - total flux cleaned = -0.000904797 Jy ! Component: 3500 - total flux cleaned = -0.000904828 Jy ! Component: 3550 - total flux cleaned = -0.000904865 Jy ! Component: 3600 - total flux cleaned = -0.00098276 Jy ! Component: 3650 - total flux cleaned = -0.000949528 Jy ! Component: 3700 - total flux cleaned = -0.000982558 Jy ! Component: 3750 - total flux cleaned = -0.000993588 Jy ! Component: 3800 - total flux cleaned = -0.000971897 Jy ! Component: 3850 - total flux cleaned = -0.00101516 Jy ! Component: 3900 - total flux cleaned = -0.00103675 Jy ! Component: 3950 - total flux cleaned = -0.00107953 Jy ! Component: 4000 - total flux cleaned = -0.00105826 Jy ! Component: 4050 - total flux cleaned = -0.00104764 Jy ! Total flux subtracted in 4096 components = -0.00112138 Jy ! Clean residual min=-0.000594 max=0.000575 Jy/beam ! Clean residual mean=0.000001 rms=0.000183 Jy/beam ! Combined flux in latest and established models = 0.287434 Jy keep ! Adding 346 model components to the UV plane model. ! The established model now contains 561 components and 0.287434 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J0110+6805_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.04 x 1.107 at -47.79 degrees (North through East) ! Clean map min=-0.0011848 max=0.18126 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J0110+6805_X_map.fits wmodel /vlbi/uf001/uva//J0110+6805_X_map.mod ! Writing 561 model components to file: /vlbi/uf001/uva//J0110+6805_X_map.mod wobs /vlbi/uf001/uva//J0110+6805_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J0110+6805_X_uvs.fits wwins /vlbi/uf001/uva//J0110+6805_X_map.win ! wwins: Wrote 12 windows to /vlbi/uf001/uva//J0110+6805_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.181257 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000182666 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.302333 0.302333 0.604665 1.20933 2.41866 4.83732 9.67464 19.3493 38.6986 77.3971 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.181 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 992.284 quit ! Quitting program ! Log file /vlbi/uf001/uva//J0110+6805_X_dfm.log closed on Sun Jan 13 20:53:00 2019