! Started logfile: /vlbi/uf001/uva//J0105+4819_X_dfm.log on Sun Jan 13 20:49:48 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J0105+4819_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J0105+4819_X_uva.fits ! AN table 1: 57 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.899805 visibilities/baseline/integration-bin. ! Found source: J0105+4819 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 27696 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0105+4819_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.085980Jy sigma=21.929864 ! Fit after self-cal, rms=0.612034Jy sigma=12.287522 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8329 mas, bmaj=1.138 mas, bpa=13.11 degrees ! Estimated noise=0.422567 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.275692 Jy ! Component: 100 - total flux cleaned = 0.370224 Jy ! Total flux subtracted in 100 components = 0.370224 Jy ! Clean residual min=-0.017008 max=0.046182 Jy/beam ! Clean residual mean=0.000016 rms=0.005099 Jy/beam ! Combined flux in latest and established models = 0.370224 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.370224 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.165023Jy sigma=3.232070 ! Fit after self-cal, rms=0.164861Jy sigma=3.229624 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0552303 Jy ! Component: 100 - total flux cleaned = 0.0910861 Jy ! Total flux subtracted in 100 components = 0.0910861 Jy ! Clean residual min=-0.011962 max=0.028325 Jy/beam ! Clean residual mean=0.000008 rms=0.003790 Jy/beam ! Combined flux in latest and established models = 0.461311 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 32 components and 0.461311 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.126555Jy sigma=2.467417 ! Fit after self-cal, rms=0.126382Jy sigma=2.464915 ! Inverting map ! Added new window around map position (-1.2, -1.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0297515 Jy ! Component: 100 - total flux cleaned = 0.0520545 Jy ! Total flux subtracted in 100 components = 0.0520545 Jy ! Clean residual min=-0.011467 max=0.023787 Jy/beam ! Clean residual mean=0.000005 rms=0.003278 Jy/beam ! Combined flux in latest and established models = 0.513365 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 49 components and 0.513365 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.110399Jy sigma=2.155977 ! Fit after self-cal, rms=0.109891Jy sigma=2.145994 ! Inverting map ! Added new window around map position (1.4, 1.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0222922 Jy ! Component: 100 - total flux cleaned = 0.0396092 Jy ! Total flux subtracted in 100 components = 0.0396092 Jy ! Clean residual min=-0.010235 max=0.016227 Jy/beam ! Clean residual mean=0.000003 rms=0.002915 Jy/beam ! Combined flux in latest and established models = 0.552974 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 69 components and 0.552974 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.100062Jy sigma=1.956069 ! Fit after self-cal, rms=0.099991Jy sigma=1.954905 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.058 mas, bmaj=1.432 mas, bpa=12.7 degrees ! Estimated noise=0.229033 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.030709 Jy ! Component: 100 - total flux cleaned = 0.0530081 Jy ! Component: 150 - total flux cleaned = 0.0705199 Jy ! Component: 200 - total flux cleaned = 0.0845521 Jy ! Total flux subtracted in 200 components = 0.0845521 Jy ! Clean residual min=-0.010405 max=0.017494 Jy/beam ! Clean residual mean=-0.000010 rms=0.002995 Jy/beam ! Combined flux in latest and established models = 0.637526 Jy ! Performing phase self-cal ! Adding 71 model components to the UV plane model. ! The established model now contains 122 components and 0.637526 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085800Jy sigma=1.672120 ! Fit after self-cal, rms=0.085610Jy sigma=1.668828 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.058 x 1.432 at 12.7 degrees (North through East) ! Clean map min=-0.0098997 max=0.38486 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.97 HN 0.93 KP 0.98 ! LA 1.00 MK 1.04 NL 1.05 OV 0.92 ! PT 0.91 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.99 HN 0.93 KP 0.97 ! LA 0.99 MK 1.05 NL 1.03 OV 0.92 ! PT 0.91 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00 HN 0.94 KP 0.98 ! LA 0.99 MK 1.03 NL 1.05 OV 0.91 ! PT 0.91 SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00 HN 0.92 KP 0.97 ! LA 0.98 MK 1.04 NL 1.06 OV 0.93 ! PT 0.91 SC 0.99 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.99 HN 0.99 KP 0.98 ! LA 1.00 MK 1.04 NL 1.01 OV 0.93 ! PT 0.92 SC 0.98 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00 HN 0.96 KP 0.99 ! LA 0.99 MK 1.03 NL 1.06 OV 0.94 ! PT 0.91 SC 0.97 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.99 HN 0.96 KP 1.00 ! LA 1.00 MK 1.06 NL 1.05 OV 0.93 ! PT 0.90 SC 0.98 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.99 HN 0.97 KP 0.99 ! LA 1.00 MK 1.04 NL 1.05 OV 0.93 ! PT 0.91 SC 0.98 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.01 HN 0.96 KP 0.99 ! LA 0.99 MK 1.05 NL 1.06 OV 0.93 ! PT 0.92 SC 1.00 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.00 HN 0.99 KP 1.00 ! LA 1.01 MK 1.05 NL 1.05 OV 0.94 ! PT 0.91 SC 1.02 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.01 HN 0.98 KP 1.00 ! LA 1.01 MK 0.99 NL 1.04 OV 0.94 ! PT 0.94 SC 1.02 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.01 HN 0.97 KP 1.00 ! LA 1.01 MK 0.98 NL 1.07 OV 0.93 ! PT 0.93 SC 1.02 ! ! ! Fit before self-cal, rms=0.085610Jy sigma=1.668828 ! Fit after self-cal, rms=0.077786Jy sigma=1.525082 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.064 mas, bmaj=1.443 mas, bpa=12.22 degrees ! Estimated noise=0.225157 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00290899 Jy ! Component: 100 - total flux cleaned = -0.00312348 Jy ! Component: 150 - total flux cleaned = -0.00351239 Jy ! Component: 200 - total flux cleaned = -0.00384327 Jy ! Total flux subtracted in 200 components = -0.00384327 Jy ! Clean residual min=-0.009680 max=0.009316 Jy/beam ! Clean residual mean=0.000001 rms=0.002263 Jy/beam ! Combined flux in latest and established models = 0.633683 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 132 components and 0.633683 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076680Jy sigma=1.492856 ! Fit after self-cal, rms=0.076647Jy sigma=1.491797 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076647Jy sigma=1.491797 ! Fit after self-cal, rms=0.068733Jy sigma=1.241950 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.06 mas, bmaj=1.447 mas, bpa=13.55 degrees ! Estimated noise=0.227798 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00660025 Jy ! Component: 100 - total flux cleaned = -0.00844118 Jy ! Component: 150 - total flux cleaned = -0.00925849 Jy ! Component: 200 - total flux cleaned = -0.00939997 Jy ! Total flux subtracted in 200 components = -0.00939997 Jy ! Clean residual min=-0.004571 max=0.004817 Jy/beam ! Clean residual mean=0.000009 rms=0.000949 Jy/beam ! Combined flux in latest and established models = 0.624283 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 148 components and 0.624283 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067667Jy sigma=1.216929 ! Fit after self-cal, rms=0.067677Jy sigma=1.215980 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-7.8, 4.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00280942 Jy ! Component: 100 - total flux cleaned = 0.00268421 Jy ! Component: 150 - total flux cleaned = 0.00291132 Jy ! Component: 200 - total flux cleaned = 0.00322111 Jy ! Total flux subtracted in 200 components = 0.00322111 Jy ! Clean residual min=-0.003960 max=0.004620 Jy/beam ! Clean residual mean=0.000010 rms=0.000867 Jy/beam ! Combined flux in latest and established models = 0.627504 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 159 components and 0.627504 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067250Jy sigma=1.205065 ! Fit after self-cal, rms=0.067224Jy sigma=1.204675 ! Inverting map ! Added new window around map position (7.6, -4.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00252094 Jy ! Component: 100 - total flux cleaned = 0.00285683 Jy ! Component: 150 - total flux cleaned = 0.00276786 Jy ! Component: 200 - total flux cleaned = 0.00276752 Jy ! Total flux subtracted in 200 components = 0.00276752 Jy ! Clean residual min=-0.003659 max=0.003797 Jy/beam ! Clean residual mean=0.000011 rms=0.000801 Jy/beam ! Combined flux in latest and established models = 0.630271 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 173 components and 0.630271 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066887Jy sigma=1.196736 ! Fit after self-cal, rms=0.066880Jy sigma=1.196485 ! Inverting map ! Added new window around map position (-0.2, 2.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00151883 Jy ! Component: 100 - total flux cleaned = 0.00171733 Jy ! Component: 150 - total flux cleaned = 0.00138613 Jy ! Component: 200 - total flux cleaned = 0.00107913 Jy ! Total flux subtracted in 200 components = 0.00107913 Jy ! Clean residual min=-0.003594 max=0.003359 Jy/beam ! Clean residual mean=0.000011 rms=0.000749 Jy/beam ! Combined flux in latest and established models = 0.631351 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 190 components and 0.63135 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066603Jy sigma=1.190521 ! Fit after self-cal, rms=0.066591Jy sigma=1.190256 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066591Jy sigma=1.190256 ! Fit after self-cal, rms=0.066346Jy sigma=1.184444 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.059 mas, bmaj=1.448 mas, bpa=13.51 degrees ! Estimated noise=0.227672 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0028751 Jy ! Component: 100 - total flux cleaned = -0.0039978 Jy ! Component: 150 - total flux cleaned = -0.00417929 Jy ! Component: 200 - total flux cleaned = -0.00425958 Jy ! Total flux subtracted in 200 components = -0.00425958 Jy ! Clean residual min=-0.002943 max=0.002764 Jy/beam ! Clean residual mean=0.000008 rms=0.000625 Jy/beam ! Combined flux in latest and established models = 0.627091 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 195 components and 0.627091 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066026Jy sigma=1.176813 ! Fit after self-cal, rms=0.066022Jy sigma=1.176640 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000107469 Jy ! Component: 100 - total flux cleaned = 0.000105634 Jy ! Component: 150 - total flux cleaned = 0.000356962 Jy ! Component: 200 - total flux cleaned = 0.000532821 Jy ! Total flux subtracted in 200 components = 0.000532821 Jy ! Clean residual min=-0.002824 max=0.002580 Jy/beam ! Clean residual mean=0.000008 rms=0.000598 Jy/beam ! Combined flux in latest and established models = 0.627624 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 206 components and 0.627624 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065900Jy sigma=1.173919 ! Fit after self-cal, rms=0.065894Jy sigma=1.173811 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065894Jy sigma=1.173811 ! Fit after self-cal, rms=0.065874Jy sigma=1.171663 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.204 mas, bmaj=2.464 mas, bpa=10.08 degrees ! Estimated noise=0.288016 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00253564 Jy ! Component: 100 - total flux cleaned = -0.00301932 Jy ! Component: 150 - total flux cleaned = -0.00314761 Jy ! Component: 200 - total flux cleaned = -0.00320408 Jy ! Total flux subtracted in 200 components = -0.00320408 Jy ! Clean residual min=-0.002477 max=0.002483 Jy/beam ! Clean residual mean=0.000016 rms=0.000597 Jy/beam ! Combined flux in latest and established models = 0.62442 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 219 components and 0.62442 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065791Jy sigma=1.168780 ! Fit after self-cal, rms=0.065787Jy sigma=1.168681 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.38522e-05 Jy ! Component: 100 - total flux cleaned = 6.31172e-05 Jy ! Component: 150 - total flux cleaned = 6.25842e-05 Jy ! Component: 200 - total flux cleaned = 0.000103457 Jy ! Total flux subtracted in 200 components = 0.000103457 Jy ! Clean residual min=-0.002334 max=0.002303 Jy/beam ! Clean residual mean=0.000016 rms=0.000570 Jy/beam ! Combined flux in latest and established models = 0.624523 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 226 components and 0.624523 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065763Jy sigma=1.167992 ! Fit after self-cal, rms=0.065761Jy sigma=1.167933 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.058 mas, bmaj=1.448 mas, bpa=13.4 degrees ! Estimated noise=0.227596 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.058 x 1.448 at 13.4 degrees (North through East) ! Clean map min=-0.0034606 max=0.38073 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8308 mas, bmaj=1.154 mas, bpa=14.06 degrees ! Estimated noise=0.42179 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.27465 Jy ! Component: 100 - total flux cleaned = 0.371034 Jy ! Component: 150 - total flux cleaned = 0.427735 Jy ! Component: 200 - total flux cleaned = 0.464976 Jy ! Total flux subtracted in 200 components = 0.464976 Jy ! Clean residual min=-0.008198 max=0.020909 Jy/beam ! Clean residual mean=0.000012 rms=0.002417 Jy/beam ! Combined flux in latest and established models = 0.464976 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 36 model components to the UV plane model. ! The established model now contains 36 components and 0.464976 Jy ! Inverting map and beam ! Estimated beam: bmin=1.058 mas, bmaj=1.448 mas, bpa=13.4 degrees ! Estimated noise=0.227596 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.045341 Jy ! Component: 100 - total flux cleaned = 0.0734164 Jy ! Component: 150 - total flux cleaned = 0.0922245 Jy ! Component: 200 - total flux cleaned = 0.105934 Jy ! Total flux subtracted in 200 components = 0.105934 Jy ! Clean residual min=-0.003833 max=0.007840 Jy/beam ! Clean residual mean=0.000005 rms=0.001242 Jy/beam ! Combined flux in latest and established models = 0.570911 Jy ! Adding 76 model components to the UV plane model. ! The established model now contains 99 components and 0.570911 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0103259 Jy ! Component: 100 - total flux cleaned = 0.0182543 Jy ! Component: 150 - total flux cleaned = 0.0244287 Jy ! Component: 200 - total flux cleaned = 0.0294147 Jy ! Total flux subtracted in 200 components = 0.0294147 Jy ! Clean residual min=-0.002696 max=0.003866 Jy/beam ! Clean residual mean=0.000005 rms=0.000713 Jy/beam ! Combined flux in latest and established models = 0.600325 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 142 components and 0.600326 Jy ! Inverting map ! Added new window around map position (21, 25.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0043298 Jy ! Component: 100 - total flux cleaned = 0.00793412 Jy ! Component: 150 - total flux cleaned = 0.0110544 Jy ! Component: 200 - total flux cleaned = 0.0137581 Jy ! Total flux subtracted in 200 components = 0.0137581 Jy ! Clean residual min=-0.002350 max=0.002803 Jy/beam ! Clean residual mean=0.000007 rms=0.000574 Jy/beam ! Combined flux in latest and established models = 0.614084 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 171 components and 0.614084 Jy ! Inverting map ! Added new window around map position (-29.2, 3.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00276662 Jy ! Component: 100 - total flux cleaned = 0.0045828 Jy ! Component: 150 - total flux cleaned = 0.00567629 Jy ! Component: 200 - total flux cleaned = 0.00660485 Jy ! Total flux subtracted in 200 components = 0.00660485 Jy ! Clean residual min=-0.002215 max=0.002245 Jy/beam ! Clean residual mean=0.000008 rms=0.000516 Jy/beam ! Combined flux in latest and established models = 0.620689 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 199 components and 0.620689 Jy ! Inverting map ! Added new window around map position (29.4, -3.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00183149 Jy ! Component: 100 - total flux cleaned = 0.00259025 Jy ! Component: 150 - total flux cleaned = 0.00323395 Jy ! Component: 200 - total flux cleaned = 0.00367203 Jy ! Total flux subtracted in 200 components = 0.00367203 Jy ! Clean residual min=-0.002124 max=0.002164 Jy/beam ! Clean residual mean=0.000009 rms=0.000482 Jy/beam ! Combined flux in latest and established models = 0.624361 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 227 components and 0.624361 Jy ! Inverting map ! Added new window around map position (-0.2, -11.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000136135 Jy ! Component: 100 - total flux cleaned = 0.000458857 Jy ! Component: 150 - total flux cleaned = 0.000716943 Jy ! Component: 200 - total flux cleaned = 0.000959687 Jy ! Total flux subtracted in 200 components = 0.000959687 Jy ! Clean residual min=-0.001936 max=0.001854 Jy/beam ! Clean residual mean=0.000009 rms=0.000451 Jy/beam ! Combined flux in latest and established models = 0.62532 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 250 components and 0.625321 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.204 mas, bmaj=2.464 mas, bpa=10.08 degrees ! Estimated noise=0.288016 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000957475 Jy ! Component: 100 - total flux cleaned = 0.00117922 Jy ! Component: 150 - total flux cleaned = 0.00113553 Jy ! Component: 200 - total flux cleaned = 0.00126819 Jy ! Total flux subtracted in 200 components = 0.00126819 Jy ! Clean residual min=-0.001877 max=0.002102 Jy/beam ! Clean residual mean=0.000021 rms=0.000539 Jy/beam ! Combined flux in latest and established models = 0.626589 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.8013e-08 Jy ! Component: 100 - total flux cleaned = 1.45562e-06 Jy ! Component: 150 - total flux cleaned = -3.51585e-05 Jy ! Component: 200 - total flux cleaned = -3.56834e-05 Jy ! Total flux subtracted in 200 components = -3.56834e-05 Jy ! Clean residual min=-0.001828 max=0.002089 Jy/beam ! Clean residual mean=0.000021 rms=0.000519 Jy/beam ! Combined flux in latest and established models = 0.626553 Jy ! Adding 61 model components to the UV plane model. ! The established model now contains 294 components and 0.626553 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.058 mas, bmaj=1.448 mas, bpa=13.4 degrees ! Estimated noise=0.227596 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000339853 Jy ! Component: 100 - total flux cleaned = -0.000418161 Jy ! Component: 150 - total flux cleaned = -0.000564372 Jy ! Component: 200 - total flux cleaned = -0.000634644 Jy ! Total flux subtracted in 200 components = -0.000634644 Jy ! Clean residual min=-0.001849 max=0.001737 Jy/beam ! Clean residual mean=0.000009 rms=0.000418 Jy/beam ! Combined flux in latest and established models = 0.625918 Jy selfcal ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 317 components and 0.625918 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065272Jy sigma=1.158502 ! Fit after self-cal, rms=0.065246Jy sigma=1.158203 wmodel J0105+4819_X_map.mod ! Writing 317 model components to file: J0105+4819_X_map.mod wobs J0105+4819_X_uvs.fits ! Writing UV FITS file: J0105+4819_X_uvs.fits wwins J0105+4819_X_map.win ! wwins: Wrote 11 windows to J0105+4819_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000232719 Jy ! Component: 100 - total flux cleaned = -0.000444405 Jy ! Component: 150 - total flux cleaned = -0.000531934 Jy ! Component: 200 - total flux cleaned = -0.000674224 Jy ! Component: 250 - total flux cleaned = -0.000812956 Jy ! Component: 300 - total flux cleaned = -0.000921318 Jy ! Component: 350 - total flux cleaned = -0.00102712 Jy ! Component: 400 - total flux cleaned = -0.0011052 Jy ! Component: 450 - total flux cleaned = -0.00123236 Jy ! Component: 500 - total flux cleaned = -0.00133227 Jy ! Component: 550 - total flux cleaned = -0.00143024 Jy ! Component: 600 - total flux cleaned = -0.00147847 Jy ! Component: 650 - total flux cleaned = -0.00154957 Jy ! Component: 700 - total flux cleaned = -0.00154947 Jy ! Component: 750 - total flux cleaned = -0.00154944 Jy ! Component: 800 - total flux cleaned = -0.00154963 Jy ! Component: 850 - total flux cleaned = -0.00157157 Jy ! Component: 900 - total flux cleaned = -0.00148418 Jy ! Component: 950 - total flux cleaned = -0.00157069 Jy ! Component: 1000 - total flux cleaned = -0.00157042 Jy ! Component: 1050 - total flux cleaned = -0.00165477 Jy ! Component: 1100 - total flux cleaned = -0.00167554 Jy ! Component: 1150 - total flux cleaned = -0.00169623 Jy ! Component: 1200 - total flux cleaned = -0.0017769 Jy ! Component: 1250 - total flux cleaned = -0.00169659 Jy ! Component: 1300 - total flux cleaned = -0.00169684 Jy ! Component: 1350 - total flux cleaned = -0.00177497 Jy ! Component: 1400 - total flux cleaned = -0.00175567 Jy ! Component: 1450 - total flux cleaned = -0.00175571 Jy ! Component: 1500 - total flux cleaned = -0.00171801 Jy ! Component: 1550 - total flux cleaned = -0.0018115 Jy ! Component: 1600 - total flux cleaned = -0.00171907 Jy ! Component: 1650 - total flux cleaned = -0.0017741 Jy ! Component: 1700 - total flux cleaned = -0.00188283 Jy ! Component: 1750 - total flux cleaned = -0.00182861 Jy ! Component: 1800 - total flux cleaned = -0.00188184 Jy ! Component: 1850 - total flux cleaned = -0.0018817 Jy ! Component: 1900 - total flux cleaned = -0.00189922 Jy ! Component: 1950 - total flux cleaned = -0.00184715 Jy ! Component: 2000 - total flux cleaned = -0.00186441 Jy ! Component: 2050 - total flux cleaned = -0.00188164 Jy ! Component: 2100 - total flux cleaned = -0.00186467 Jy ! Component: 2150 - total flux cleaned = -0.00188145 Jy ! Component: 2200 - total flux cleaned = -0.00186495 Jy ! Component: 2250 - total flux cleaned = -0.00186504 Jy ! Component: 2300 - total flux cleaned = -0.00189781 Jy ! Component: 2350 - total flux cleaned = -0.00186541 Jy ! Component: 2400 - total flux cleaned = -0.00184957 Jy ! Component: 2450 - total flux cleaned = -0.00183375 Jy ! Component: 2500 - total flux cleaned = -0.0018806 Jy ! Component: 2550 - total flux cleaned = -0.00180254 Jy ! Component: 2600 - total flux cleaned = -0.00184887 Jy ! Component: 2650 - total flux cleaned = -0.00183354 Jy ! Component: 2700 - total flux cleaned = -0.00175757 Jy ! Component: 2750 - total flux cleaned = -0.00180284 Jy ! Component: 2800 - total flux cleaned = -0.00175762 Jy ! Component: 2850 - total flux cleaned = -0.00166834 Jy ! Component: 2900 - total flux cleaned = -0.00165362 Jy ! Component: 2950 - total flux cleaned = -0.00162426 Jy ! Component: 3000 - total flux cleaned = -0.00160958 Jy ! Component: 3050 - total flux cleaned = -0.00155177 Jy ! Component: 3100 - total flux cleaned = -0.00148014 Jy ! Component: 3150 - total flux cleaned = -0.00142338 Jy ! Component: 3200 - total flux cleaned = -0.00143754 Jy ! Component: 3250 - total flux cleaned = -0.00136747 Jy ! Component: 3300 - total flux cleaned = -0.00132573 Jy ! Component: 3350 - total flux cleaned = -0.00125667 Jy ! Component: 3400 - total flux cleaned = -0.00125689 Jy ! Component: 3450 - total flux cleaned = -0.00122949 Jy ! Component: 3500 - total flux cleaned = -0.00117537 Jy ! Component: 3550 - total flux cleaned = -0.00114848 Jy ! Component: 3600 - total flux cleaned = -0.00110836 Jy ! Component: 3650 - total flux cleaned = -0.000975481 Jy ! Component: 3700 - total flux cleaned = -0.000962395 Jy ! Component: 3750 - total flux cleaned = -0.000909918 Jy ! Component: 3800 - total flux cleaned = -0.000883919 Jy ! Component: 3850 - total flux cleaned = -0.000806426 Jy ! Component: 3900 - total flux cleaned = -0.000780659 Jy ! Component: 3950 - total flux cleaned = -0.000716763 Jy ! Component: 4000 - total flux cleaned = -0.000716692 Jy ! Component: 4050 - total flux cleaned = -0.000704063 Jy ! Total flux subtracted in 4096 components = -0.000666334 Jy ! Clean residual min=-0.000687 max=0.000667 Jy/beam ! Clean residual mean=0.000004 rms=0.000221 Jy/beam ! Combined flux in latest and established models = 0.625252 Jy keep ! Adding 327 model components to the UV plane model. ! The established model now contains 644 components and 0.625252 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J0105+4819_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.058 x 1.448 at 13.4 degrees (North through East) ! Clean map min=-0.0017061 max=0.37973 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J0105+4819_X_map.fits wmodel /vlbi/uf001/uva//J0105+4819_X_map.mod ! Writing 644 model components to file: /vlbi/uf001/uva//J0105+4819_X_map.mod wobs /vlbi/uf001/uva//J0105+4819_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J0105+4819_X_uvs.fits wwins /vlbi/uf001/uva//J0105+4819_X_map.win ! wwins: Wrote 12 windows to /vlbi/uf001/uva//J0105+4819_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.379731 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00022057 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.174257 0.174257 0.348515 0.69703 1.39406 2.78812 5.57624 11.1525 22.305 44.6099 89.2198 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.379 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1721.59 quit ! Quitting program ! Log file /vlbi/uf001/uva//J0105+4819_X_dfm.log closed on Sun Jan 13 20:49:55 2019