! Started logfile: /vlbi/uf001/uva//J0105+0600_S_dfm.log on Sun Jan 13 20:49:30 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J0105+0600_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0105+0600_S_uva.fits
! AN table 1: 73 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.983366 visibilities/baseline/integration-bin.
! Found source: J0105+0600
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 6030 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0105+0600_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.005793Jy  sigma=21.522990
! Fit after  self-cal, rms=0.892707Jy  sigma=19.064728
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.766 mas, bmaj=12.11 mas, bpa=-19.01 degrees
! Estimated noise=0.653166 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0835348 Jy
! Component: 100  -  total flux cleaned = 0.102755 Jy
! Total flux subtracted in 100 components = 0.102755 Jy
! Clean residual min=-0.005390 max=0.009540 Jy/beam
! Clean residual mean=0.000004 rms=0.001607 Jy/beam
! Combined flux in latest and established models = 0.102755 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.102755 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064599Jy  sigma=1.272588
! Fit after  self-cal, rms=0.064543Jy  sigma=1.272060
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.373 mas, bmaj=12.14 mas, bpa=-18.78 degrees
! Estimated noise=0.437504 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (12.5, 66.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0102891 Jy
! Component: 100  -  total flux cleaned = 0.0157945 Jy
! Component: 150  -  total flux cleaned = 0.018473 Jy
! Component: 200  -  total flux cleaned = 0.0196268 Jy
! Total flux subtracted in 200 components = 0.0196268 Jy
! Clean residual min=-0.003637 max=0.005442 Jy/beam
! Clean residual mean=0.000003 rms=0.000983 Jy/beam
! Combined flux in latest and established models = 0.122382 Jy
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 47 components and 0.122382 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063017Jy  sigma=1.230286
! Fit after  self-cal, rms=0.062947Jy  sigma=1.228350
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.373 x 12.14 at -18.78 degrees (North through East)
! Clean map  min=-0.0031655  max=0.10827 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.95     HN        0.99     KP        0.92     
!   LA        0.94     MK        1.03     NL        1.11     OV        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.95     HN        0.98     KP        1.00     
!   LA        0.95     MK        1.03     NL        1.00     OV        0.93     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.02     HN        0.98     KP        0.97     
!   LA        0.96     MK        1.00     NL        1.08     OV        0.97     
! 
! 
! Fit before self-cal, rms=0.062947Jy  sigma=1.228350
! Fit after  self-cal, rms=0.062613Jy  sigma=1.219129
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.405 mas, bmaj=12.24 mas, bpa=-18.66 degrees
! Estimated noise=0.429725 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00184531 Jy
! Component: 100  -  total flux cleaned = -0.00303419 Jy
! Component: 150  -  total flux cleaned = -0.0038426 Jy
! Component: 200  -  total flux cleaned = -0.00431561 Jy
! Total flux subtracted in 200 components = -0.00431561 Jy
! Clean residual min=-0.002850 max=0.002543 Jy/beam
! Clean residual mean=0.000002 rms=0.000710 Jy/beam
! Combined flux in latest and established models = 0.118066 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 71 components and 0.118066 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062379Jy  sigma=1.215463
! Fit after  self-cal, rms=0.062432Jy  sigma=1.215107
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062432Jy  sigma=1.215107
! Fit after  self-cal, rms=0.066728Jy  sigma=1.206288
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.411 mas, bmaj=12.29 mas, bpa=-18.84 degrees
! Estimated noise=0.433437 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000536575 Jy
! Component: 100  -  total flux cleaned = -0.000289779 Jy
! Component: 150  -  total flux cleaned = -0.000110178 Jy
! Component: 200  -  total flux cleaned = -4.61033e-05 Jy
! Total flux subtracted in 200 components = -4.61033e-05 Jy
! Clean residual min=-0.001976 max=0.001851 Jy/beam
! Clean residual mean=0.000002 rms=0.000484 Jy/beam
! Combined flux in latest and established models = 0.11802 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 102 components and 0.11802 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.066681Jy  sigma=1.205193
! Fit after  self-cal, rms=0.066766Jy  sigma=1.205005
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.8415e-06 Jy
! Component: 100  -  total flux cleaned = 0.000102012 Jy
! Component: 150  -  total flux cleaned = 0.000235213 Jy
! Component: 200  -  total flux cleaned = 0.0003358 Jy
! Total flux subtracted in 200 components = 0.0003358 Jy
! Clean residual min=-0.001929 max=0.001841 Jy/beam
! Clean residual mean=0.000002 rms=0.000468 Jy/beam
! Combined flux in latest and established models = 0.118356 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 114 components and 0.118356 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.066745Jy  sigma=1.204541
! Fit after  self-cal, rms=0.066745Jy  sigma=1.204529
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.066745Jy  sigma=1.204529
! Fit after  self-cal, rms=0.067181Jy  sigma=1.204409
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.41 mas, bmaj=12.3 mas, bpa=-18.85 degrees
! Estimated noise=0.432931 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000285333 Jy
! Component: 100  -  total flux cleaned = -0.000312097 Jy
! Component: 150  -  total flux cleaned = -0.000197031 Jy
! Component: 200  -  total flux cleaned = -8.9736e-05 Jy
! Total flux subtracted in 200 components = -8.9736e-05 Jy
! Clean residual min=-0.001831 max=0.001754 Jy/beam
! Clean residual mean=0.000001 rms=0.000447 Jy/beam
! Combined flux in latest and established models = 0.118266 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 126 components and 0.118266 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067162Jy  sigma=1.204019
! Fit after  self-cal, rms=0.067171Jy  sigma=1.203999
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.60477e-05 Jy
! Component: 100  -  total flux cleaned = -1.66153e-05 Jy
! Component: 150  -  total flux cleaned = 5.89998e-05 Jy
! Component: 200  -  total flux cleaned = 9.44989e-05 Jy
! Total flux subtracted in 200 components = 9.44989e-05 Jy
! Clean residual min=-0.001807 max=0.001721 Jy/beam
! Clean residual mean=0.000001 rms=0.000438 Jy/beam
! Combined flux in latest and established models = 0.11836 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 133 components and 0.11836 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067160Jy  sigma=1.203767
! Fit after  self-cal, rms=0.067159Jy  sigma=1.203761
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067159Jy  sigma=1.203761
! Fit after  self-cal, rms=0.067245Jy  sigma=1.203717
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.163 mas, bmaj=12.51 mas, bpa=-12.58 degrees
! Estimated noise=0.532887 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.4892e-05 Jy
! Component: 100  -  total flux cleaned = 0.000115696 Jy
! Component: 150  -  total flux cleaned = 0.000132279 Jy
! Component: 200  -  total flux cleaned = 0.00017604 Jy
! Total flux subtracted in 200 components = 0.00017604 Jy
! Clean residual min=-0.001930 max=0.001874 Jy/beam
! Clean residual mean=0.000002 rms=0.000500 Jy/beam
! Combined flux in latest and established models = 0.118536 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 161 components and 0.118536 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067241Jy  sigma=1.203627
! Fit after  self-cal, rms=0.067244Jy  sigma=1.203608
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.51874e-05 Jy
! Component: 100  -  total flux cleaned = 7.25982e-05 Jy
! Component: 150  -  total flux cleaned = 8.54805e-05 Jy
! Component: 200  -  total flux cleaned = 0.000110792 Jy
! Total flux subtracted in 200 components = 0.000110792 Jy
! Clean residual min=-0.001911 max=0.001847 Jy/beam
! Clean residual mean=0.000002 rms=0.000493 Jy/beam
! Combined flux in latest and established models = 0.118647 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 173 components and 0.118647 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067241Jy  sigma=1.203579
! Fit after  self-cal, rms=0.067240Jy  sigma=1.203571
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.41 mas, bmaj=12.3 mas, bpa=-18.87 degrees
! Estimated noise=0.43242 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.41 x 12.3 at -18.87 degrees (North through East)
! Clean map  min=-0.0021554  max=0.10713 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.79 mas, bmaj=12.2 mas, bpa=-19.14 degrees
! Estimated noise=0.648492 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0828053 Jy
! Component: 100  -  total flux cleaned = 0.101663 Jy
! Component: 150  -  total flux cleaned = 0.10951 Jy
! Component: 200  -  total flux cleaned = 0.11288 Jy
! Total flux subtracted in 200 components = 0.11288 Jy
! Clean residual min=-0.003351 max=0.003345 Jy/beam
! Clean residual mean=0.000002 rms=0.000820 Jy/beam
! Combined flux in latest and established models = 0.11288 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.11288 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.41 mas, bmaj=12.3 mas, bpa=-18.87 degrees
! Estimated noise=0.43242 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00330561 Jy
! Component: 100  -  total flux cleaned = 0.00396286 Jy
! Component: 150  -  total flux cleaned = 0.00436635 Jy
! Component: 200  -  total flux cleaned = 0.00448031 Jy
! Total flux subtracted in 200 components = 0.00448031 Jy
! Clean residual min=-0.002299 max=0.002170 Jy/beam
! Clean residual mean=0.000001 rms=0.000523 Jy/beam
! Combined flux in latest and established models = 0.11736 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 47 components and 0.11736 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.163 mas, bmaj=12.51 mas, bpa=-12.58 degrees
! Estimated noise=0.532887 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000265153 Jy
! Component: 100  -  total flux cleaned = 0.000140021 Jy
! Component: 150  -  total flux cleaned = 6.70852e-05 Jy
! Component: 200  -  total flux cleaned = 6.62613e-05 Jy
! Total flux subtracted in 200 components = 6.62613e-05 Jy
! Clean residual min=-0.002029 max=0.002145 Jy/beam
! Clean residual mean=0.000002 rms=0.000537 Jy/beam
! Combined flux in latest and established models = 0.117427 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.08921e-07 Jy
! Component: 100  -  total flux cleaned = 8.10182e-07 Jy
! Component: 150  -  total flux cleaned = 8.43172e-07 Jy
! Component: 200  -  total flux cleaned = -1.77189e-05 Jy
! Total flux subtracted in 200 components = -1.77189e-05 Jy
! Clean residual min=-0.001952 max=0.002118 Jy/beam
! Clean residual mean=0.000002 rms=0.000528 Jy/beam
! Combined flux in latest and established models = 0.117409 Jy
! Adding 57 model components to the UV plane model.
! The established model now contains 97 components and 0.117409 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.41 mas, bmaj=12.3 mas, bpa=-18.87 degrees
! Estimated noise=0.43242 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000202833 Jy
! Component: 100  -  total flux cleaned = -9.71664e-05 Jy
! Component: 150  -  total flux cleaned = -0.000129789 Jy
! Component: 200  -  total flux cleaned = -4.29756e-05 Jy
! Total flux subtracted in 200 components = -4.29756e-05 Jy
! Clean residual min=-0.001866 max=0.001854 Jy/beam
! Clean residual mean=0.000001 rms=0.000460 Jy/beam
! Combined flux in latest and established models = 0.117366 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 120 components and 0.117366 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067290Jy  sigma=1.204526
! Fit after  self-cal, rms=0.067274Jy  sigma=1.204388
wmodel J0105+0600_S_map.mod
! Writing 120 model components to file: J0105+0600_S_map.mod
wobs   J0105+0600_S_uvs.fits
! Writing UV FITS file: J0105+0600_S_uvs.fits
wwins  J0105+0600_S_map.win
! wwins: Wrote 2 windows to J0105+0600_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000220339 Jy
! Component: 100  -  total flux cleaned = 0.000555032 Jy
! Component: 150  -  total flux cleaned = 0.000638805 Jy
! Component: 200  -  total flux cleaned = 0.000771052 Jy
! Component: 250  -  total flux cleaned = 0.00079646 Jy
! Component: 300  -  total flux cleaned = 0.000701128 Jy
! Component: 350  -  total flux cleaned = 0.000678502 Jy
! Component: 400  -  total flux cleaned = 0.000633787 Jy
! Component: 450  -  total flux cleaned = 0.000526088 Jy
! Component: 500  -  total flux cleaned = 0.000421824 Jy
! Component: 550  -  total flux cleaned = 0.000320359 Jy
! Component: 600  -  total flux cleaned = 0.000201932 Jy
! Component: 650  -  total flux cleaned = 6.81252e-05 Jy
! Component: 700  -  total flux cleaned = 1.19544e-05 Jy
! Component: 750  -  total flux cleaned = 2.97518e-05 Jy
! Component: 800  -  total flux cleaned = -6.30903e-06 Jy
! Component: 850  -  total flux cleaned = -2.37858e-05 Jy
! Component: 900  -  total flux cleaned = -6.0625e-06 Jy
! Component: 950  -  total flux cleaned = 4.48753e-05 Jy
! Component: 1000  -  total flux cleaned = 2.81898e-05 Jy
! Component: 1050  -  total flux cleaned = 2.84457e-05 Jy
! Component: 1100  -  total flux cleaned = 9.24835e-05 Jy
! Component: 1150  -  total flux cleaned = 2.91099e-05 Jy
! Component: 1200  -  total flux cleaned = 1.37351e-05 Jy
! Component: 1250  -  total flux cleaned = 1.41833e-05 Jy
! Component: 1300  -  total flux cleaned = -6.36682e-07 Jy
! Component: 1350  -  total flux cleaned = -3.08309e-07 Jy
! Component: 1400  -  total flux cleaned = -4.39252e-05 Jy
! Component: 1450  -  total flux cleaned = -2.93178e-05 Jy
! Component: 1500  -  total flux cleaned = -4.35175e-05 Jy
! Component: 1550  -  total flux cleaned = -2.92563e-05 Jy
! Component: 1600  -  total flux cleaned = -9.82818e-05 Jy
! Component: 1650  -  total flux cleaned = -0.000125661 Jy
! Component: 1700  -  total flux cleaned = -0.000192834 Jy
! Component: 1750  -  total flux cleaned = -0.000152831 Jy
! Component: 1800  -  total flux cleaned = -0.000179143 Jy
! Component: 1850  -  total flux cleaned = -0.000205193 Jy
! Component: 1900  -  total flux cleaned = -0.000243823 Jy
! Component: 1950  -  total flux cleaned = -0.000218435 Jy
! Component: 2000  -  total flux cleaned = -0.000268884 Jy
! Component: 2050  -  total flux cleaned = -0.000293617 Jy
! Component: 2100  -  total flux cleaned = -0.000293558 Jy
! Component: 2150  -  total flux cleaned = -0.000293406 Jy
! Component: 2200  -  total flux cleaned = -0.000269203 Jy
! Component: 2250  -  total flux cleaned = -0.000269222 Jy
! Component: 2300  -  total flux cleaned = -0.000293208 Jy
! Component: 2350  -  total flux cleaned = -0.000304975 Jy
! Component: 2400  -  total flux cleaned = -0.000316627 Jy
! Component: 2450  -  total flux cleaned = -0.000293567 Jy
! Component: 2500  -  total flux cleaned = -0.00031648 Jy
! Component: 2550  -  total flux cleaned = -0.000305365 Jy
! Component: 2600  -  total flux cleaned = -0.000327954 Jy
! Component: 2650  -  total flux cleaned = -0.00035012 Jy
! Component: 2700  -  total flux cleaned = -0.000317069 Jy
! Component: 2750  -  total flux cleaned = -0.000317068 Jy
! Component: 2800  -  total flux cleaned = -0.000306255 Jy
! Component: 2850  -  total flux cleaned = -0.000327815 Jy
! Component: 2900  -  total flux cleaned = -0.000295724 Jy
! Component: 2950  -  total flux cleaned = -0.000316933 Jy
! Component: 3000  -  total flux cleaned = -0.000264219 Jy
! Component: 3050  -  total flux cleaned = -0.000232953 Jy
! Component: 3100  -  total flux cleaned = -0.000212219 Jy
! Component: 3150  -  total flux cleaned = -0.000212171 Jy
! Component: 3200  -  total flux cleaned = -0.000201872 Jy
! Component: 3250  -  total flux cleaned = -0.000191609 Jy
! Component: 3300  -  total flux cleaned = -0.00014115 Jy
! Component: 3350  -  total flux cleaned = -0.000131124 Jy
! Component: 3400  -  total flux cleaned = -0.000121117 Jy
! Component: 3450  -  total flux cleaned = -0.000111109 Jy
! Component: 3500  -  total flux cleaned = -7.17537e-05 Jy
! Component: 3550  -  total flux cleaned = -3.26718e-05 Jy
! Component: 3600  -  total flux cleaned = -3.26885e-05 Jy
! Component: 3650  -  total flux cleaned = 1.56653e-05 Jy
! Component: 3700  -  total flux cleaned = 2.52223e-05 Jy
! Component: 3750  -  total flux cleaned = 5.39277e-05 Jy
! Component: 3800  -  total flux cleaned = 0.000101554 Jy
! Component: 3850  -  total flux cleaned = 0.00014888 Jy
! Component: 3900  -  total flux cleaned = 0.000158254 Jy
! Component: 3950  -  total flux cleaned = 0.000205163 Jy
! Component: 4000  -  total flux cleaned = 0.000251797 Jy
! Component: 4050  -  total flux cleaned = 0.000270402 Jy
! Total flux subtracted in 4096 components = 0.000279682 Jy
! Clean residual min=-0.000693 max=0.000496 Jy/beam
! Clean residual mean=-0.000000 rms=0.000162 Jy/beam
! Combined flux in latest and established models = 0.117645 Jy
keep
! Adding 264 model components to the UV plane model.
! The established model now contains 384 components and 0.117646 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0105+0600_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.41 x 12.3 at -18.87 degrees (North through East)
! Clean map  min=-0.0021033  max=0.10698 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0105+0600_S_map.fits
wmodel /vlbi/uf001/uva//J0105+0600_S_map.mod
! Writing 384 model components to file: /vlbi/uf001/uva//J0105+0600_S_map.mod
wobs   /vlbi/uf001/uva//J0105+0600_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0105+0600_S_uvs.fits
wwins  /vlbi/uf001/uva//J0105+0600_S_map.win
! wwins: Wrote 3 windows to /vlbi/uf001/uva//J0105+0600_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.10698 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000160236 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.449346 0.449346 0.898692 1.79738 3.59477 7.18954 14.3791 28.7581 57.5163
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.106 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  667.636 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0105+0600_S_dfm.log closed on Sun Jan 13 20:49:35 2019