! Started logfile: /vlbi/uf001/uvm//J0103-1222_S_a_dfm.log on Sun Jan 13 20:26:58 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uvm//J0103-1222_S_a_uvm.fits
! Reading UV FITS file: /vlbi/uf001/uvm//J0103-1222_S_a_uvm.fits
! AN table 1: 48 integrations on 45 of 45 possible baselines.
! AN table 2: 74 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.94896 visibilities/baseline/integration-bin.
! Found source: J0103-1222
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 12048 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0103-1222_S_a]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  A total of 16 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  A total of 16 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  A total of 16 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.003235Jy  sigma=18.188135
! Fit after  self-cal, rms=0.953304Jy  sigma=17.299442
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.726 mas, bmaj=9.429 mas, bpa=-13.53 degrees
! Estimated noise=0.490081 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.035856 Jy
! Component: 100  -  total flux cleaned = 0.0444852 Jy
! Total flux subtracted in 100 components = 0.0444852 Jy
! Clean residual min=-0.002843 max=0.003690 Jy/beam
! Clean residual mean=0.000003 rms=0.000752 Jy/beam
! Combined flux in latest and established models = 0.0444852 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.0444852 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075496Jy  sigma=1.227476
! Fit after  self-cal, rms=0.074169Jy  sigma=1.203667
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00589689 Jy
! Component: 100  -  total flux cleaned = 0.00936617 Jy
! Total flux subtracted in 100 components = 0.00936617 Jy
! Clean residual min=-0.002452 max=0.002536 Jy/beam
! Clean residual mean=0.000003 rms=0.000658 Jy/beam
! Combined flux in latest and established models = 0.0538514 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 21 components and 0.0538514 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.073508Jy  sigma=1.190992
! Fit after  self-cal, rms=0.073456Jy  sigma=1.190193
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.298 mas, bmaj=11.16 mas, bpa=-13.6 degrees
! Estimated noise=0.366363 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00343009 Jy
! Component: 100  -  total flux cleaned = 0.00505206 Jy
! Component: 150  -  total flux cleaned = 0.00535889 Jy
! Component: 200  -  total flux cleaned = 0.00556148 Jy
! Total flux subtracted in 200 components = 0.00556148 Jy
! Clean residual min=-0.001741 max=0.001982 Jy/beam
! Clean residual mean=0.000005 rms=0.000503 Jy/beam
! Combined flux in latest and established models = 0.0594128 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 36 components and 0.0594128 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.073285Jy  sigma=1.187306
! Fit after  self-cal, rms=0.073255Jy  sigma=1.187069
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.298 x 11.16 at -13.6 degrees (North through East)
! Clean map  min=-0.0017237  max=0.050688 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.95     HN        1.05     KP        1.23     
!   LA        0.98     MK        1.15     NL        1.00     OV        0.96     
!   PT        0.94     SC        1.09     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.87     FD        0.90     HN        1.01     KP        0.91     
!   LA        0.91     MK        1.06     NL        1.25     OV        1.12     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.98     HN        1.03     KP        1.00     
!   LA        0.94     MK        1.02     NL        1.07     OV        1.07     
!   PT        0.98     SC        0.96     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.86     FD        0.93     HN        0.99     KP        1.01     
!   LA        0.94     MK        0.95     NL        1.04     OV        1.06     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.95     HN        1.04     KP        1.07     
!   LA        0.97     MK        0.94     NL        0.97     OV        1.15     
!   PT        1.03     SC        1.04     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.79     FD        1.00     HN        1.01     KP        1.03     
!   LA        1.01     MK        0.94     NL        1.06     OV        0.99     
! 
! 
! Fit before self-cal, rms=0.073255Jy  sigma=1.187069
! Fit after  self-cal, rms=0.071670Jy  sigma=1.183052
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.318 mas, bmaj=11.07 mas, bpa=-13.61 degrees
! Estimated noise=0.363661 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000333868 Jy
! Component: 100  -  total flux cleaned = 0.000287966 Jy
! Component: 150  -  total flux cleaned = 0.000250045 Jy
! Component: 200  -  total flux cleaned = 0.000249822 Jy
! Total flux subtracted in 200 components = 0.000249822 Jy
! Clean residual min=-0.001674 max=0.001906 Jy/beam
! Clean residual mean=0.000004 rms=0.000433 Jy/beam
! Combined flux in latest and established models = 0.0596627 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 48 components and 0.0596627 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071654Jy  sigma=1.182853
! Fit after  self-cal, rms=0.071692Jy  sigma=1.181905
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071692Jy  sigma=1.181905
! Fit after  self-cal, rms=0.071754Jy  sigma=1.180431
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.316 mas, bmaj=11.04 mas, bpa=-13.38 degrees
! Estimated noise=0.363181 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000298586 Jy
! Component: 100  -  total flux cleaned = 0.000316724 Jy
! Component: 150  -  total flux cleaned = 0.000333819 Jy
! Component: 200  -  total flux cleaned = 0.000348651 Jy
! Total flux subtracted in 200 components = 0.000348651 Jy
! Clean residual min=-0.001488 max=0.001790 Jy/beam
! Clean residual mean=0.000001 rms=0.000397 Jy/beam
! Combined flux in latest and established models = 0.0600113 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 56 components and 0.0600113 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071742Jy  sigma=1.180287
! Fit after  self-cal, rms=0.071782Jy  sigma=1.180018
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-14.5, 56.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00141412 Jy
! Component: 100  -  total flux cleaned = 0.00152896 Jy
! Component: 150  -  total flux cleaned = 0.00150031 Jy
! Component: 200  -  total flux cleaned = 0.00147446 Jy
! Total flux subtracted in 200 components = 0.00147446 Jy
! Clean residual min=-0.001404 max=0.001461 Jy/beam
! Clean residual mean=0.000002 rms=0.000375 Jy/beam
! Combined flux in latest and established models = 0.0614858 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 78 components and 0.0614858 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071736Jy  sigma=1.179250
! Fit after  self-cal, rms=0.071736Jy  sigma=1.179105
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071736Jy  sigma=1.179105
! Fit after  self-cal, rms=0.071860Jy  sigma=1.179021
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.314 mas, bmaj=10.99 mas, bpa=-13.27 degrees
! Estimated noise=0.362727 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000795332 Jy
! Component: 100  -  total flux cleaned = 0.000742543 Jy
! Component: 150  -  total flux cleaned = 0.00067499 Jy
! Component: 200  -  total flux cleaned = 0.000634154 Jy
! Total flux subtracted in 200 components = 0.000634154 Jy
! Clean residual min=-0.001365 max=0.001397 Jy/beam
! Clean residual mean=0.000002 rms=0.000366 Jy/beam
! Combined flux in latest and established models = 0.0621199 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 92 components and 0.0621199 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071837Jy  sigma=1.178714
! Fit after  self-cal, rms=0.071849Jy  sigma=1.178641
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000246831 Jy
! Component: 100  -  total flux cleaned = 0.000167959 Jy
! Component: 150  -  total flux cleaned = 0.000113408 Jy
! Component: 200  -  total flux cleaned = 6.08946e-05 Jy
! Total flux subtracted in 200 components = 6.08946e-05 Jy
! Clean residual min=-0.001337 max=0.001352 Jy/beam
! Clean residual mean=0.000002 rms=0.000363 Jy/beam
! Combined flux in latest and established models = 0.0621808 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 102 components and 0.0621808 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071837Jy  sigma=1.178482
! Fit after  self-cal, rms=0.071836Jy  sigma=1.178466
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071836Jy  sigma=1.178466
! Fit after  self-cal, rms=0.071923Jy  sigma=1.178433
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.477 mas, bmaj=15.37 mas, bpa=-2.633 degrees
! Estimated noise=0.451491 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000234461 Jy
! Component: 100  -  total flux cleaned = 0.000309036 Jy
! Component: 150  -  total flux cleaned = 0.000337426 Jy
! Component: 200  -  total flux cleaned = 0.000369565 Jy
! Total flux subtracted in 200 components = 0.000369565 Jy
! Clean residual min=-0.001492 max=0.001487 Jy/beam
! Clean residual mean=0.000002 rms=0.000404 Jy/beam
! Combined flux in latest and established models = 0.0625504 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 120 components and 0.0625504 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071918Jy  sigma=1.178388
! Fit after  self-cal, rms=0.071924Jy  sigma=1.178336
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.12335e-05 Jy
! Component: 100  -  total flux cleaned = -4.95609e-05 Jy
! Component: 150  -  total flux cleaned = -7.85498e-06 Jy
! Component: 200  -  total flux cleaned = 2.27548e-06 Jy
! Total flux subtracted in 200 components = 2.27548e-06 Jy
! Clean residual min=-0.001481 max=0.001490 Jy/beam
! Clean residual mean=0.000002 rms=0.000402 Jy/beam
! Combined flux in latest and established models = 0.0625527 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 129 components and 0.0625527 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071923Jy  sigma=1.178331
! Fit after  self-cal, rms=0.071923Jy  sigma=1.178302
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.315 mas, bmaj=10.97 mas, bpa=-13.23 degrees
! Estimated noise=0.362377 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.315 x 10.97 at -13.23 degrees (North through East)
! Clean map  min=-0.0012426  max=0.050049 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.742 mas, bmaj=9.329 mas, bpa=-13.21 degrees
! Estimated noise=0.48909 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0370744 Jy
! Component: 100  -  total flux cleaned = 0.047275 Jy
! Component: 150  -  total flux cleaned = 0.0526111 Jy
! Component: 200  -  total flux cleaned = 0.0561135 Jy
! Total flux subtracted in 200 components = 0.0561135 Jy
! Clean residual min=-0.002469 max=0.002498 Jy/beam
! Clean residual mean=0.000000 rms=0.000614 Jy/beam
! Combined flux in latest and established models = 0.0561135 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 0.0561135 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.315 mas, bmaj=10.97 mas, bpa=-13.23 degrees
! Estimated noise=0.362377 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00311245 Jy
! Component: 100  -  total flux cleaned = 0.00444406 Jy
! Component: 150  -  total flux cleaned = 0.00510646 Jy
! Component: 200  -  total flux cleaned = 0.00538851 Jy
! Total flux subtracted in 200 components = 0.00538851 Jy
! Clean residual min=-0.001357 max=0.001446 Jy/beam
! Clean residual mean=0.000001 rms=0.000387 Jy/beam
! Combined flux in latest and established models = 0.061502 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 46 components and 0.061502 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.477 mas, bmaj=15.37 mas, bpa=-2.633 degrees
! Estimated noise=0.451491 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000497058 Jy
! Component: 100  -  total flux cleaned = 0.000619219 Jy
! Component: 150  -  total flux cleaned = 0.000773639 Jy
! Component: 200  -  total flux cleaned = 0.000861649 Jy
! Total flux subtracted in 200 components = 0.000861649 Jy
! Clean residual min=-0.001491 max=0.001421 Jy/beam
! Clean residual mean=0.000002 rms=0.000413 Jy/beam
! Combined flux in latest and established models = 0.0623637 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.51868e-05 Jy
! Component: 100  -  total flux cleaned = 0.000123542 Jy
! Component: 150  -  total flux cleaned = 0.000166958 Jy
! Component: 200  -  total flux cleaned = 0.000207496 Jy
! Total flux subtracted in 200 components = 0.000207496 Jy
! Clean residual min=-0.001461 max=0.001421 Jy/beam
! Clean residual mean=0.000002 rms=0.000405 Jy/beam
! Combined flux in latest and established models = 0.0625712 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 82 components and 0.0625712 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.315 mas, bmaj=10.97 mas, bpa=-13.23 degrees
! Estimated noise=0.362377 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000350332 Jy
! Component: 100  -  total flux cleaned = 0.000348584 Jy
! Component: 150  -  total flux cleaned = 0.000323376 Jy
! Component: 200  -  total flux cleaned = 0.000277234 Jy
! Total flux subtracted in 200 components = 0.000277234 Jy
! Clean residual min=-0.001327 max=0.001358 Jy/beam
! Clean residual mean=0.000002 rms=0.000364 Jy/beam
! Combined flux in latest and established models = 0.0628484 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 95 components and 0.0628484 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071941Jy  sigma=1.178652
! Fit after  self-cal, rms=0.071929Jy  sigma=1.178533
wmodel J0103-1222_S_a_map.mod
! Writing 95 model components to file: J0103-1222_S_a_map.mod
wobs   J0103-1222_S_a_uvs.fits
! Writing UV FITS file: J0103-1222_S_a_uvs.fits
wwins  J0103-1222_S_a_map.win
! wwins: Wrote 2 windows to J0103-1222_S_a_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000102963 Jy
! Component: 100  -  total flux cleaned = 0.000197652 Jy
! Component: 150  -  total flux cleaned = 0.000289055 Jy
! Component: 200  -  total flux cleaned = 0.000333049 Jy
! Component: 250  -  total flux cleaned = 0.000311501 Jy
! Component: 300  -  total flux cleaned = 0.000270057 Jy
! Component: 350  -  total flux cleaned = 0.000330882 Jy
! Component: 400  -  total flux cleaned = 0.000370177 Jy
! Component: 450  -  total flux cleaned = 0.000408586 Jy
! Component: 500  -  total flux cleaned = 0.000465443 Jy
! Component: 550  -  total flux cleaned = 0.000521481 Jy
! Component: 600  -  total flux cleaned = 0.000576709 Jy
! Component: 650  -  total flux cleaned = 0.000667143 Jy
! Component: 700  -  total flux cleaned = 0.000667225 Jy
! Component: 750  -  total flux cleaned = 0.00073749 Jy
! Component: 800  -  total flux cleaned = 0.000771946 Jy
! Component: 850  -  total flux cleaned = 0.000822458 Jy
! Component: 900  -  total flux cleaned = 0.000838781 Jy
! Component: 950  -  total flux cleaned = 0.000920986 Jy
! Component: 1000  -  total flux cleaned = 0.000872022 Jy
! Component: 1050  -  total flux cleaned = 0.000968638 Jy
! Component: 1100  -  total flux cleaned = 0.000984631 Jy
! Component: 1150  -  total flux cleaned = 0.00107882 Jy
! Component: 1200  -  total flux cleaned = 0.00112546 Jy
! Component: 1250  -  total flux cleaned = 0.00114078 Jy
! Component: 1300  -  total flux cleaned = 0.00115603 Jy
! Component: 1350  -  total flux cleaned = 0.00120093 Jy
! Component: 1400  -  total flux cleaned = 0.00115628 Jy
! Component: 1450  -  total flux cleaned = 0.00115626 Jy
! Component: 1500  -  total flux cleaned = 0.00111262 Jy
! Component: 1550  -  total flux cleaned = 0.00118477 Jy
! Component: 1600  -  total flux cleaned = 0.00114196 Jy
! Component: 1650  -  total flux cleaned = 0.00115622 Jy
! Component: 1700  -  total flux cleaned = 0.00112806 Jy
! Component: 1750  -  total flux cleaned = 0.00114195 Jy
! Component: 1800  -  total flux cleaned = 0.00112813 Jy
! Component: 1850  -  total flux cleaned = 0.00110049 Jy
! Component: 1900  -  total flux cleaned = 0.00108684 Jy
! Component: 1950  -  total flux cleaned = 0.00104654 Jy
! Component: 2000  -  total flux cleaned = 0.00104653 Jy
! Component: 2050  -  total flux cleaned = 0.000993491 Jy
! Component: 2100  -  total flux cleaned = 0.00104589 Jy
! Component: 2150  -  total flux cleaned = 0.00101981 Jy
! Component: 2200  -  total flux cleaned = 0.000993995 Jy
! Component: 2250  -  total flux cleaned = 0.000993994 Jy
! Component: 2300  -  total flux cleaned = 0.00100653 Jy
! Component: 2350  -  total flux cleaned = 0.000993932 Jy
! Component: 2400  -  total flux cleaned = 0.00101907 Jy
! Component: 2450  -  total flux cleaned = 0.0010438 Jy
! Component: 2500  -  total flux cleaned = 0.00101914 Jy
! Component: 2550  -  total flux cleaned = 0.000994737 Jy
! Component: 2600  -  total flux cleaned = 0.000946456 Jy
! Component: 2650  -  total flux cleaned = 0.000982658 Jy
! Component: 2700  -  total flux cleaned = 0.00100649 Jy
! Component: 2750  -  total flux cleaned = 0.000970992 Jy
! Component: 2800  -  total flux cleaned = 0.000970937 Jy
! Component: 2850  -  total flux cleaned = 0.000970979 Jy
! Component: 2900  -  total flux cleaned = 0.000994225 Jy
! Component: 2950  -  total flux cleaned = 0.000948087 Jy
! Component: 3000  -  total flux cleaned = 0.000971063 Jy
! Component: 3050  -  total flux cleaned = 0.00101661 Jy
! Component: 3100  -  total flux cleaned = 0.00100529 Jy
! Component: 3150  -  total flux cleaned = 0.000971634 Jy
! Component: 3200  -  total flux cleaned = 0.00100506 Jy
! Component: 3250  -  total flux cleaned = 0.00100507 Jy
! Component: 3300  -  total flux cleaned = 0.000993956 Jy
! Component: 3350  -  total flux cleaned = 0.000961262 Jy
! Component: 3400  -  total flux cleaned = 0.000983094 Jy
! Component: 3450  -  total flux cleaned = 0.000961304 Jy
! Component: 3500  -  total flux cleaned = 0.000993577 Jy
! Component: 3550  -  total flux cleaned = 0.00101471 Jy
! Component: 3600  -  total flux cleaned = 0.000993383 Jy
! Component: 3650  -  total flux cleaned = 0.00101447 Jy
! Component: 3700  -  total flux cleaned = 0.00101449 Jy
! Component: 3750  -  total flux cleaned = 0.00100399 Jy
! Component: 3800  -  total flux cleaned = 0.000993652 Jy
! Component: 3850  -  total flux cleaned = 0.00105547 Jy
! Component: 3900  -  total flux cleaned = 0.000993973 Jy
! Component: 3950  -  total flux cleaned = 0.000994006 Jy
! Component: 4000  -  total flux cleaned = 0.00102442 Jy
! Component: 4050  -  total flux cleaned = 0.000994186 Jy
! Total flux subtracted in 4096 components = 0.000984121 Jy
! Clean residual min=-0.000568 max=0.000681 Jy/beam
! Clean residual mean=0.000001 rms=0.000192 Jy/beam
! Combined flux in latest and established models = 0.0638325 Jy
keep
! Adding 289 model components to the UV plane model.
! The established model now contains 384 components and 0.0638324 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uvm//J0103-1222_S_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.315 x 10.97 at -13.23 degrees (North through East)
! Clean map  min=-0.0011215  max=0.049821 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uvm//J0103-1222_S_a_map.fits
wmodel /vlbi/uf001/uvm//J0103-1222_S_a_map.mod
! Writing 384 model components to file: /vlbi/uf001/uvm//J0103-1222_S_a_map.mod
wobs   /vlbi/uf001/uvm//J0103-1222_S_a_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uvm//J0103-1222_S_a_uvs.fits
wwins  /vlbi/uf001/uvm//J0103-1222_S_a_map.win
! wwins: Wrote 3 windows to /vlbi/uf001/uvm//J0103-1222_S_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0498211 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000190913 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.14959 1.14959 2.29918 4.59837 9.19673 18.3935 36.7869 73.5738
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.049 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  260.962 
quit
! Quitting program
! Log file /vlbi/uf001/uvm//J0103-1222_S_a_dfm.log closed on Sun Jan 13 20:27:02 2019