! Started logfile: /vlbi/uf001/uva//J0101+0605_S_dfm.log on Sun Jan 13 20:48:17 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J0101+0605_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0101+0605_S_uva.fits
! AN table 1: 57 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.999165 visibilities/baseline/integration-bin.
! Found source: J0101+0605
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 3588 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0101+0605_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=1.003128Jy  sigma=25.348534
! Fit after  self-cal, rms=0.949416Jy  sigma=23.971525
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.993 mas, bmaj=20.14 mas, bpa=-16.08 degrees
! Estimated noise=0.63751 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0402415 Jy
! Component: 100  -  total flux cleaned = 0.0486978 Jy
! Total flux subtracted in 100 components = 0.0486978 Jy
! Clean residual min=-0.005090 max=0.011024 Jy/beam
! Clean residual mean=0.000023 rms=0.001689 Jy/beam
! Combined flux in latest and established models = 0.0486979 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.0486979 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057453Jy  sigma=1.399843
! Fit after  self-cal, rms=0.056209Jy  sigma=1.369245
! Inverting map 
! Added new window around map position (16.5, 8.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0103105 Jy
! Component: 100  -  total flux cleaned = 0.0158727 Jy
! Total flux subtracted in 100 components = 0.0158727 Jy
! Clean residual min=-0.003968 max=0.006635 Jy/beam
! Clean residual mean=0.000018 rms=0.001126 Jy/beam
! Combined flux in latest and established models = 0.0645705 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 35 components and 0.0645705 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.054073Jy  sigma=1.311131
! Fit after  self-cal, rms=0.053578Jy  sigma=1.298301
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00623266 Jy
! Component: 100  -  total flux cleaned = 0.00941821 Jy
! Total flux subtracted in 100 components = 0.00941821 Jy
! Clean residual min=-0.003174 max=0.003996 Jy/beam
! Clean residual mean=0.000011 rms=0.000864 Jy/beam
! Combined flux in latest and established models = 0.0739888 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 48 components and 0.0739888 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.052717Jy  sigma=1.275197
! Fit after  self-cal, rms=0.052517Jy  sigma=1.271101
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.712 mas, bmaj=20.47 mas, bpa=-16.29 degrees
! Estimated noise=0.478764 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00485999 Jy
! Component: 100  -  total flux cleaned = 0.00679222 Jy
! Component: 150  -  total flux cleaned = 0.00791533 Jy
! Component: 200  -  total flux cleaned = 0.00875304 Jy
! Total flux subtracted in 200 components = 0.00875304 Jy
! Clean residual min=-0.002457 max=0.002252 Jy/beam
! Clean residual mean=0.000011 rms=0.000625 Jy/beam
! Combined flux in latest and established models = 0.0827418 Jy
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 81 components and 0.0827418 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.052036Jy  sigma=1.258183
! Fit after  self-cal, rms=0.051962Jy  sigma=1.256115
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.712 x 20.47 at -16.29 degrees (North through East)
! Clean map  min=-0.0024086  max=0.050258 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     HN        1.01     KP        0.97     LA        0.93     
!   NL        1.04     OV        1.04     PT        1.09     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.96     HN        1.00     KP        0.99     LA        0.93     
!   NL        1.08     OV        0.93     PT        0.94     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     HN        0.98     KP        1.01     LA        0.91     
!   NL        0.98     OV        0.98     PT        1.04     
! 
! 
! Fit before self-cal, rms=0.051962Jy  sigma=1.256115
! Fit after  self-cal, rms=0.050692Jy  sigma=1.251924
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.733 mas, bmaj=20.44 mas, bpa=-16.17 degrees
! Estimated noise=0.469459 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000531677 Jy
! Component: 100  -  total flux cleaned = 0.000329986 Jy
! Component: 150  -  total flux cleaned = 6.10288e-05 Jy
! Component: 200  -  total flux cleaned = 3.18173e-05 Jy
! Total flux subtracted in 200 components = 3.18173e-05 Jy
! Clean residual min=-0.001580 max=0.001779 Jy/beam
! Clean residual mean=0.000004 rms=0.000506 Jy/beam
! Combined flux in latest and established models = 0.0827736 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 108 components and 0.0827736 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.050605Jy  sigma=1.249378
! Fit after  self-cal, rms=0.050609Jy  sigma=1.248693
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.050609Jy  sigma=1.248693
! Fit after  self-cal, rms=0.050587Jy  sigma=1.245736
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.741 mas, bmaj=20.43 mas, bpa=-16.14 degrees
! Estimated noise=0.469983 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000328668 Jy
! Component: 100  -  total flux cleaned = 0.000234792 Jy
! Component: 150  -  total flux cleaned = 0.000132262 Jy
! Component: 200  -  total flux cleaned = 4.21314e-05 Jy
! Total flux subtracted in 200 components = 4.21314e-05 Jy
! Clean residual min=-0.001484 max=0.001580 Jy/beam
! Clean residual mean=0.000004 rms=0.000464 Jy/beam
! Combined flux in latest and established models = 0.0828158 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 122 components and 0.0828158 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.050551Jy  sigma=1.244809
! Fit after  self-cal, rms=0.050555Jy  sigma=1.244552
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.46451e-05 Jy
! Component: 100  -  total flux cleaned = -3.15821e-05 Jy
! Component: 150  -  total flux cleaned = -1.25501e-05 Jy
! Component: 200  -  total flux cleaned = -6.5412e-05 Jy
! Total flux subtracted in 200 components = -6.5412e-05 Jy
! Clean residual min=-0.001487 max=0.001600 Jy/beam
! Clean residual mean=0.000004 rms=0.000455 Jy/beam
! Combined flux in latest and established models = 0.0827504 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 137 components and 0.0827504 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.050538Jy  sigma=1.244140
! Fit after  self-cal, rms=0.050539Jy  sigma=1.244093
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.050539Jy  sigma=1.244093
! Fit after  self-cal, rms=0.050501Jy  sigma=1.243862
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.749 mas, bmaj=20.44 mas, bpa=-16.16 degrees
! Estimated noise=0.46929 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000122568 Jy
! Component: 100  -  total flux cleaned = 2.96365e-05 Jy
! Component: 150  -  total flux cleaned = -1.98101e-05 Jy
! Component: 200  -  total flux cleaned = -0.000112069 Jy
! Total flux subtracted in 200 components = -0.000112069 Jy
! Clean residual min=-0.001509 max=0.001512 Jy/beam
! Clean residual mean=0.000003 rms=0.000444 Jy/beam
! Combined flux in latest and established models = 0.0826383 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 148 components and 0.0826383 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.050487Jy  sigma=1.243579
! Fit after  self-cal, rms=0.050491Jy  sigma=1.243534
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.59954e-06 Jy
! Component: 100  -  total flux cleaned = -0.000127735 Jy
! Component: 150  -  total flux cleaned = -0.000195908 Jy
! Component: 200  -  total flux cleaned = -0.000246281 Jy
! Total flux subtracted in 200 components = -0.000246281 Jy
! Clean residual min=-0.001500 max=0.001505 Jy/beam
! Clean residual mean=0.000003 rms=0.000440 Jy/beam
! Combined flux in latest and established models = 0.082392 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 153 components and 0.082392 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.050482Jy  sigma=1.243366
! Fit after  self-cal, rms=0.050483Jy  sigma=1.243347
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.050483Jy  sigma=1.243347
! Fit after  self-cal, rms=0.050409Jy  sigma=1.243319
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.117 mas, bmaj=20.17 mas, bpa=-16.66 degrees
! Estimated noise=0.504888 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0003088 Jy
! Component: 100  -  total flux cleaned = -0.000364242 Jy
! Component: 150  -  total flux cleaned = -0.00036422 Jy
! Component: 200  -  total flux cleaned = -0.000384172 Jy
! Total flux subtracted in 200 components = -0.000384172 Jy
! Clean residual min=-0.001523 max=0.001655 Jy/beam
! Clean residual mean=0.000005 rms=0.000477 Jy/beam
! Combined flux in latest and established models = 0.0820078 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 171 components and 0.0820079 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.050405Jy  sigma=1.243165
! Fit after  self-cal, rms=0.050406Jy  sigma=1.243138
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.88347e-05 Jy
! Component: 100  -  total flux cleaned = -8.80533e-05 Jy
! Component: 150  -  total flux cleaned = -0.0001144 Jy
! Component: 200  -  total flux cleaned = -0.000139784 Jy
! Total flux subtracted in 200 components = -0.000139784 Jy
! Clean residual min=-0.001505 max=0.001644 Jy/beam
! Clean residual mean=0.000005 rms=0.000475 Jy/beam
! Combined flux in latest and established models = 0.0818681 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 184 components and 0.0818681 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.050403Jy  sigma=1.243089
! Fit after  self-cal, rms=0.050404Jy  sigma=1.243079
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=5.752 mas, bmaj=20.46 mas, bpa=-16.18 degrees
! Estimated noise=0.468703 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.752 x 20.46 at -16.18 degrees (North through East)
! Clean map  min=-0.0016137  max=0.048453 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.02 mas, bmaj=20.11 mas, bpa=-15.97 degrees
! Estimated noise=0.626672 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0410055 Jy
! Component: 100  -  total flux cleaned = 0.0570469 Jy
! Component: 150  -  total flux cleaned = 0.065483 Jy
! Component: 200  -  total flux cleaned = 0.0701847 Jy
! Total flux subtracted in 200 components = 0.0701847 Jy
! Clean residual min=-0.003940 max=0.003674 Jy/beam
! Clean residual mean=0.000012 rms=0.000893 Jy/beam
! Combined flux in latest and established models = 0.0701847 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 30 model components to the UV plane model.
! The established model now contains 30 components and 0.0701847 Jy
! Inverting map and beam 
! Estimated beam: bmin=5.752 mas, bmaj=20.46 mas, bpa=-16.18 degrees
! Estimated noise=0.468703 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (9.5, 0.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00399062 Jy
! Component: 100  -  total flux cleaned = 0.00568322 Jy
! Component: 150  -  total flux cleaned = 0.00672897 Jy
! Component: 200  -  total flux cleaned = 0.00761738 Jy
! Total flux subtracted in 200 components = 0.00761738 Jy
! Clean residual min=-0.002070 max=0.002113 Jy/beam
! Clean residual mean=0.000009 rms=0.000534 Jy/beam
! Combined flux in latest and established models = 0.077802 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 77 components and 0.077802 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.117 mas, bmaj=20.17 mas, bpa=-16.66 degrees
! Estimated noise=0.504888 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000878924 Jy
! Component: 100  -  total flux cleaned = 0.0014894 Jy
! Component: 150  -  total flux cleaned = 0.00171055 Jy
! Component: 200  -  total flux cleaned = 0.00186128 Jy
! Total flux subtracted in 200 components = 0.00186128 Jy
! Clean residual min=-0.001727 max=0.001784 Jy/beam
! Clean residual mean=0.000008 rms=0.000503 Jy/beam
! Combined flux in latest and established models = 0.0796633 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000161716 Jy
! Component: 100  -  total flux cleaned = 0.000274694 Jy
! Component: 150  -  total flux cleaned = 0.000347114 Jy
! Component: 200  -  total flux cleaned = 0.000413007 Jy
! Total flux subtracted in 200 components = 0.000413007 Jy
! Clean residual min=-0.001609 max=0.001599 Jy/beam
! Clean residual mean=0.000007 rms=0.000480 Jy/beam
! Combined flux in latest and established models = 0.0800763 Jy
! Adding 107 model components to the UV plane model.
! The established model now contains 176 components and 0.0800763 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=5.752 mas, bmaj=20.46 mas, bpa=-16.18 degrees
! Estimated noise=0.468703 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000294714 Jy
! Component: 100  -  total flux cleaned = 0.0004217 Jy
! Component: 150  -  total flux cleaned = 0.000538487 Jy
! Component: 200  -  total flux cleaned = 0.000664783 Jy
! Total flux subtracted in 200 components = 0.000664783 Jy
! Clean residual min=-0.001441 max=0.001541 Jy/beam
! Clean residual mean=0.000005 rms=0.000428 Jy/beam
! Combined flux in latest and established models = 0.0807411 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 205 components and 0.0807411 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.050405Jy  sigma=1.243005
! Fit after  self-cal, rms=0.050398Jy  sigma=1.242819
wmodel J0101+0605_S_map.mod
! Writing 205 model components to file: J0101+0605_S_map.mod
wobs   J0101+0605_S_uvs.fits
! Writing UV FITS file: J0101+0605_S_uvs.fits
wwins  J0101+0605_S_map.win
! wwins: Wrote 3 windows to J0101+0605_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000367975 Jy
! Component: 100  -  total flux cleaned = 0.000421443 Jy
! Component: 150  -  total flux cleaned = 0.000373998 Jy
! Component: 200  -  total flux cleaned = 0.000260999 Jy
! Component: 250  -  total flux cleaned = 6.69975e-05 Jy
! Component: 300  -  total flux cleaned = -7.66902e-05 Jy
! Component: 350  -  total flux cleaned = -0.000234942 Jy
! Component: 400  -  total flux cleaned = -0.000330632 Jy
! Component: 450  -  total flux cleaned = -0.000442007 Jy
! Component: 500  -  total flux cleaned = -0.00053222 Jy
! Component: 550  -  total flux cleaned = -0.000602556 Jy
! Component: 600  -  total flux cleaned = -0.000670595 Jy
! Component: 650  -  total flux cleaned = -0.000703681 Jy
! Component: 700  -  total flux cleaned = -0.000719627 Jy
! Component: 750  -  total flux cleaned = -0.00073545 Jy
! Component: 800  -  total flux cleaned = -0.000812583 Jy
! Component: 850  -  total flux cleaned = -0.000812186 Jy
! Component: 900  -  total flux cleaned = -0.000724196 Jy
! Component: 950  -  total flux cleaned = -0.000680976 Jy
! Component: 1000  -  total flux cleaned = -0.000610181 Jy
! Component: 1050  -  total flux cleaned = -0.000554595 Jy
! Component: 1100  -  total flux cleaned = -0.000472556 Jy
! Component: 1150  -  total flux cleaned = -0.0004059 Jy
! Component: 1200  -  total flux cleaned = -0.000301238 Jy
! Component: 1250  -  total flux cleaned = -0.000249843 Jy
! Component: 1300  -  total flux cleaned = -0.000186503 Jy
! Component: 1350  -  total flux cleaned = -7.43028e-05 Jy
! Component: 1400  -  total flux cleaned = -2.55057e-05 Jy
! Component: 1450  -  total flux cleaned = 7.12151e-05 Jy
! Component: 1500  -  total flux cleaned = 0.000142641 Jy
! Component: 1550  -  total flux cleaned = 0.000212858 Jy
! Component: 1600  -  total flux cleaned = 0.000316711 Jy
! Component: 1650  -  total flux cleaned = 0.000339631 Jy
! Component: 1700  -  total flux cleaned = 0.000407348 Jy
! Component: 1750  -  total flux cleaned = 0.000462893 Jy
! Component: 1800  -  total flux cleaned = 0.000528742 Jy
! Component: 1850  -  total flux cleaned = 0.000593536 Jy
! Component: 1900  -  total flux cleaned = 0.000668095 Jy
! Component: 1950  -  total flux cleaned = 0.000689178 Jy
! Component: 2000  -  total flux cleaned = 0.00074136 Jy
! Component: 2050  -  total flux cleaned = 0.000803258 Jy
! Component: 2100  -  total flux cleaned = 0.000813473 Jy
! Component: 2150  -  total flux cleaned = 0.000874065 Jy
! Component: 2200  -  total flux cleaned = 0.00090414 Jy
! Component: 2250  -  total flux cleaned = 0.000992998 Jy
! Component: 2300  -  total flux cleaned = 0.0010124 Jy
! Component: 2350  -  total flux cleaned = 0.00105107 Jy
! Component: 2400  -  total flux cleaned = 0.00108946 Jy
! Component: 2450  -  total flux cleaned = 0.00113674 Jy
! Component: 2500  -  total flux cleaned = 0.00115552 Jy
! Component: 2550  -  total flux cleaned = 0.00117396 Jy
! Component: 2600  -  total flux cleaned = 0.00121998 Jy
! Component: 2650  -  total flux cleaned = 0.00120166 Jy
! Component: 2700  -  total flux cleaned = 0.00121075 Jy
! Component: 2750  -  total flux cleaned = 0.0012106 Jy
! Component: 2800  -  total flux cleaned = 0.00121952 Jy
! Component: 2850  -  total flux cleaned = 0.00120185 Jy
! Component: 2900  -  total flux cleaned = 0.00123687 Jy
! Component: 2950  -  total flux cleaned = 0.00126293 Jy
! Component: 3000  -  total flux cleaned = 0.00127161 Jy
! Component: 3050  -  total flux cleaned = 0.00128882 Jy
! Component: 3100  -  total flux cleaned = 0.00130584 Jy
! Component: 3150  -  total flux cleaned = 0.00132275 Jy
! Component: 3200  -  total flux cleaned = 0.00130597 Jy
! Component: 3250  -  total flux cleaned = 0.00133934 Jy
! Component: 3300  -  total flux cleaned = 0.00131451 Jy
! Component: 3350  -  total flux cleaned = 0.00134745 Jy
! Component: 3400  -  total flux cleaned = 0.00137195 Jy
! Component: 3450  -  total flux cleaned = 0.00136394 Jy
! Component: 3500  -  total flux cleaned = 0.0013962 Jy
! Component: 3550  -  total flux cleaned = 0.00140426 Jy
! Component: 3600  -  total flux cleaned = 0.00141222 Jy
! Component: 3650  -  total flux cleaned = 0.00142015 Jy
! Component: 3700  -  total flux cleaned = 0.00144381 Jy
! Component: 3750  -  total flux cleaned = 0.00145161 Jy
! Component: 3800  -  total flux cleaned = 0.00144382 Jy
! Component: 3850  -  total flux cleaned = 0.00145161 Jy
! Component: 3900  -  total flux cleaned = 0.00149019 Jy
! Component: 3950  -  total flux cleaned = 0.00149778 Jy
! Component: 4000  -  total flux cleaned = 0.00152835 Jy
! Component: 4050  -  total flux cleaned = 0.0015208 Jy
! Total flux subtracted in 4096 components = 0.00155112 Jy
! Clean residual min=-0.000559 max=0.000540 Jy/beam
! Clean residual mean=0.000002 rms=0.000158 Jy/beam
! Combined flux in latest and established models = 0.0822922 Jy
keep
! Adding 371 model components to the UV plane model.
! The established model now contains 576 components and 0.0822922 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0101+0605_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.752 x 20.46 at -16.18 degrees (North through East)
! Clean map  min=-0.0017346  max=0.047799 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0101+0605_S_map.fits
wmodel /vlbi/uf001/uva//J0101+0605_S_map.mod
! Writing 576 model components to file: /vlbi/uf001/uva//J0101+0605_S_map.mod
wobs   /vlbi/uf001/uva//J0101+0605_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0101+0605_S_uvs.fits
wwins  /vlbi/uf001/uva//J0101+0605_S_map.win
! wwins: Wrote 4 windows to /vlbi/uf001/uva//J0101+0605_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0477989 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00015455 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.969999 0.969999 1.94 3.87999 7.75999 15.52 31.04 62.0799
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.047 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  309.278 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0101+0605_S_dfm.log closed on Sun Jan 13 20:48:22 2019