! Started logfile: /vlbi/uf001/uva//J0100-3337_S_dfm.log on Sun Jan 13 20:48:06 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /vlbi/uf001/uva//J0100-3337_S_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J0100-3337_S_uva.fits ! AN table 1: 59 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.895669 visibilities/baseline/integration-bin. ! Found source: J0100-3337 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 7134 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0100-3337_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 59 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 59 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 59 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.020474Jy sigma=13.800985 ! Fit after self-cal, rms=0.865622Jy sigma=11.684797 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.414 mas, bmaj=6.426 mas, bpa=-4.646 degrees ! Estimated noise=1.02968 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.10962 Jy ! Component: 100 - total flux cleaned = 0.133708 Jy ! Total flux subtracted in 100 components = 0.133708 Jy ! Clean residual min=-0.007617 max=0.009397 Jy/beam ! Clean residual mean=-0.000037 rms=0.001785 Jy/beam ! Combined flux in latest and established models = 0.133708 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.133708 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.096621Jy sigma=1.225897 ! Fit after self-cal, rms=0.096575Jy sigma=1.225410 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.031 mas, bmaj=7.695 mas, bpa=-4.784 degrees ! Estimated noise=0.646506 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.5, -7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00894418 Jy ! Component: 100 - total flux cleaned = 0.013038 Jy ! Component: 150 - total flux cleaned = 0.0144387 Jy ! Component: 200 - total flux cleaned = 0.0145151 Jy ! Total flux subtracted in 200 components = 0.0145151 Jy ! Clean residual min=-0.004818 max=0.005823 Jy/beam ! Clean residual mean=-0.000042 rms=0.001281 Jy/beam ! Combined flux in latest and established models = 0.148223 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 21 components and 0.148223 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.095897Jy sigma=1.212473 ! Fit after self-cal, rms=0.095857Jy sigma=1.211443 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.031 x 7.695 at -4.784 degrees (North through East) ! Clean map min=-0.0044426 max=0.13646 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.91 HN 1.21 KP 0.95 ! LA 0.95 MK 1.00 NL 1.08 OV 0.96 ! PT 1.05 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.91 HN 1.18 KP 0.99 ! LA 0.95 MK 0.98 NL 1.09 OV 0.98 ! PT 1.06 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.94 HN 1.12 KP 1.01 ! LA 0.96 MK 0.95 NL 1.05 OV 0.95 ! PT 1.07 SC 0.99 ! ! ! Fit before self-cal, rms=0.095857Jy sigma=1.211443 ! Fit after self-cal, rms=0.098169Jy sigma=1.201781 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.031 mas, bmaj=7.678 mas, bpa=-4.695 degrees ! Estimated noise=0.642623 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000827244 Jy ! Component: 100 - total flux cleaned = -0.000874403 Jy ! Component: 150 - total flux cleaned = -0.00091406 Jy ! Component: 200 - total flux cleaned = -0.000915979 Jy ! Total flux subtracted in 200 components = -0.000915979 Jy ! Clean residual min=-0.004420 max=0.003972 Jy/beam ! Clean residual mean=-0.000050 rms=0.001004 Jy/beam ! Combined flux in latest and established models = 0.147307 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 40 components and 0.147307 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.098113Jy sigma=1.201291 ! Fit after self-cal, rms=0.098230Jy sigma=1.200997 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.098230Jy sigma=1.200997 ! Fit after self-cal, rms=0.098894Jy sigma=1.193397 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.033 mas, bmaj=7.684 mas, bpa=-4.782 degrees ! Estimated noise=0.644345 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000557946 Jy ! Component: 100 - total flux cleaned = -0.000517018 Jy ! Component: 150 - total flux cleaned = -0.000516124 Jy ! Component: 200 - total flux cleaned = -0.000517039 Jy ! Total flux subtracted in 200 components = -0.000517039 Jy ! Clean residual min=-0.003231 max=0.002864 Jy/beam ! Clean residual mean=-0.000013 rms=0.000772 Jy/beam ! Combined flux in latest and established models = 0.14679 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 57 components and 0.14679 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.098858Jy sigma=1.193004 ! Fit after self-cal, rms=0.098864Jy sigma=1.192885 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000151448 Jy ! Component: 100 - total flux cleaned = -0.000150978 Jy ! Component: 150 - total flux cleaned = -0.000150987 Jy ! Component: 200 - total flux cleaned = -0.000151002 Jy ! Total flux subtracted in 200 components = -0.000151002 Jy ! Clean residual min=-0.003205 max=0.002808 Jy/beam ! Clean residual mean=-0.000014 rms=0.000766 Jy/beam ! Combined flux in latest and established models = 0.146639 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 66 components and 0.146639 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.098845Jy sigma=1.192704 ! Fit after self-cal, rms=0.098842Jy sigma=1.192693 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.098842Jy sigma=1.192693 ! Fit after self-cal, rms=0.099584Jy sigma=1.192085 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.033 mas, bmaj=7.685 mas, bpa=-4.842 degrees ! Estimated noise=0.644184 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000447551 Jy ! Component: 100 - total flux cleaned = -0.0003439 Jy ! Component: 150 - total flux cleaned = -0.000343598 Jy ! Component: 200 - total flux cleaned = -0.000343662 Jy ! Total flux subtracted in 200 components = -0.000343662 Jy ! Clean residual min=-0.002882 max=0.002810 Jy/beam ! Clean residual mean=-0.000002 rms=0.000735 Jy/beam ! Combined flux in latest and established models = 0.146295 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 78 components and 0.146295 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.099560Jy sigma=1.191797 ! Fit after self-cal, rms=0.099568Jy sigma=1.191772 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.87063e-05 Jy ! Component: 100 - total flux cleaned = -7.24517e-05 Jy ! Component: 150 - total flux cleaned = -7.28927e-05 Jy ! Component: 200 - total flux cleaned = -7.33028e-05 Jy ! Total flux subtracted in 200 components = -7.33028e-05 Jy ! Clean residual min=-0.002855 max=0.002774 Jy/beam ! Clean residual mean=-0.000003 rms=0.000729 Jy/beam ! Combined flux in latest and established models = 0.146222 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 81 components and 0.146222 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.099555Jy sigma=1.191622 ! Fit after self-cal, rms=0.099552Jy sigma=1.191615 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.099552Jy sigma=1.191615 ! Fit after self-cal, rms=0.099873Jy sigma=1.191544 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.17 mas, bmaj=21.38 mas, bpa=0.8778 degrees ! Estimated noise=0.835756 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000445836 Jy ! Component: 100 - total flux cleaned = -0.00049805 Jy ! Component: 150 - total flux cleaned = -0.000559939 Jy ! Component: 200 - total flux cleaned = -0.000592877 Jy ! Total flux subtracted in 200 components = -0.000592877 Jy ! Clean residual min=-0.003175 max=0.003826 Jy/beam ! Clean residual mean=-0.000004 rms=0.000991 Jy/beam ! Combined flux in latest and established models = 0.145629 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 87 components and 0.145629 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.099873Jy sigma=1.191460 ! Fit after self-cal, rms=0.099872Jy sigma=1.191433 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.99545e-05 Jy ! Component: 100 - total flux cleaned = -5.82283e-05 Jy ! Component: 150 - total flux cleaned = -0.000103968 Jy ! Component: 200 - total flux cleaned = -0.000116432 Jy ! Total flux subtracted in 200 components = -0.000116432 Jy ! Clean residual min=-0.003120 max=0.003782 Jy/beam ! Clean residual mean=-0.000004 rms=0.000984 Jy/beam ! Combined flux in latest and established models = 0.145513 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 89 components and 0.145513 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.099874Jy sigma=1.191416 ! Fit after self-cal, rms=0.099870Jy sigma=1.191400 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.032 mas, bmaj=7.686 mas, bpa=-4.868 degrees ! Estimated noise=0.64382 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.032 x 7.686 at -4.868 degrees (North through East) ! Clean map min=-0.002671 max=0.13632 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.409 mas, bmaj=6.412 mas, bpa=-4.707 degrees ! Estimated noise=1.02229 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.108796 Jy ! Component: 100 - total flux cleaned = 0.132778 Jy ! Component: 150 - total flux cleaned = 0.139796 Jy ! Component: 200 - total flux cleaned = 0.143463 Jy ! Total flux subtracted in 200 components = 0.143463 Jy ! Clean residual min=-0.004939 max=0.004650 Jy/beam ! Clean residual mean=-0.000005 rms=0.001199 Jy/beam ! Combined flux in latest and established models = 0.143463 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.143463 Jy ! Inverting map and beam ! Estimated beam: bmin=3.032 mas, bmaj=7.686 mas, bpa=-4.868 degrees ! Estimated noise=0.64382 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.001689 Jy ! Component: 100 - total flux cleaned = 0.00177684 Jy ! Component: 150 - total flux cleaned = 0.00178133 Jy ! Component: 200 - total flux cleaned = 0.00173364 Jy ! Total flux subtracted in 200 components = 0.00173364 Jy ! Clean residual min=-0.002940 max=0.002972 Jy/beam ! Clean residual mean=-0.000004 rms=0.000747 Jy/beam ! Combined flux in latest and established models = 0.145197 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 37 components and 0.145197 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.17 mas, bmaj=21.38 mas, bpa=0.8778 degrees ! Estimated noise=0.835756 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.08403e-05 Jy ! Component: 100 - total flux cleaned = -3.43116e-05 Jy ! Component: 150 - total flux cleaned = -0.00010297 Jy ! Component: 200 - total flux cleaned = -0.000141161 Jy ! Total flux subtracted in 200 components = -0.000141161 Jy ! Clean residual min=-0.003045 max=0.003791 Jy/beam ! Clean residual mean=-0.000007 rms=0.000989 Jy/beam ! Combined flux in latest and established models = 0.145056 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.69675e-05 Jy ! Component: 100 - total flux cleaned = -3.178e-05 Jy ! Component: 150 - total flux cleaned = -3.171e-05 Jy ! Component: 200 - total flux cleaned = -4.58098e-05 Jy ! Total flux subtracted in 200 components = -4.58098e-05 Jy ! Clean residual min=-0.003004 max=0.003783 Jy/beam ! Clean residual mean=-0.000007 rms=0.000987 Jy/beam ! Combined flux in latest and established models = 0.14501 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 55 components and 0.14501 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.032 mas, bmaj=7.686 mas, bpa=-4.868 degrees ! Estimated noise=0.64382 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000416283 Jy ! Component: 100 - total flux cleaned = 0.000417032 Jy ! Component: 150 - total flux cleaned = 0.000417526 Jy ! Component: 200 - total flux cleaned = 0.000446345 Jy ! Total flux subtracted in 200 components = 0.000446345 Jy ! Clean residual min=-0.002886 max=0.002857 Jy/beam ! Clean residual mean=-0.000003 rms=0.000728 Jy/beam ! Combined flux in latest and established models = 0.145456 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 68 components and 0.145456 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.099893Jy sigma=1.191608 ! Fit after self-cal, rms=0.099871Jy sigma=1.191513 wmodel J0100-3337_S_map.mod ! Writing 68 model components to file: J0100-3337_S_map.mod wobs J0100-3337_S_uvs.fits ! Writing UV FITS file: J0100-3337_S_uvs.fits wwins J0100-3337_S_map.win ! wwins: Wrote 2 windows to J0100-3337_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000314886 Jy ! Component: 100 - total flux cleaned = -0.000706393 Jy ! Component: 150 - total flux cleaned = -0.000754501 Jy ! Component: 200 - total flux cleaned = -0.000798568 Jy ! Component: 250 - total flux cleaned = -0.000756956 Jy ! Component: 300 - total flux cleaned = -0.000757794 Jy ! Component: 350 - total flux cleaned = -0.000835575 Jy ! Component: 400 - total flux cleaned = -0.000796106 Jy ! Component: 450 - total flux cleaned = -0.00079528 Jy ! Component: 500 - total flux cleaned = -0.00090338 Jy ! Component: 550 - total flux cleaned = -0.00111594 Jy ! Component: 600 - total flux cleaned = -0.00115084 Jy ! Component: 650 - total flux cleaned = -0.00125238 Jy ! Component: 700 - total flux cleaned = -0.00131853 Jy ! Component: 750 - total flux cleaned = -0.00135113 Jy ! Component: 800 - total flux cleaned = -0.00131868 Jy ! Component: 850 - total flux cleaned = -0.00135037 Jy ! Component: 900 - total flux cleaned = -0.00132026 Jy ! Component: 950 - total flux cleaned = -0.00144063 Jy ! Component: 1000 - total flux cleaned = -0.00132132 Jy ! Component: 1050 - total flux cleaned = -0.00135028 Jy ! Component: 1100 - total flux cleaned = -0.00135015 Jy ! Component: 1150 - total flux cleaned = -0.00132142 Jy ! Component: 1200 - total flux cleaned = -0.00126555 Jy ! Component: 1250 - total flux cleaned = -0.0012384 Jy ! Component: 1300 - total flux cleaned = -0.00115698 Jy ! Component: 1350 - total flux cleaned = -0.00107681 Jy ! Component: 1400 - total flux cleaned = -0.00094529 Jy ! Component: 1450 - total flux cleaned = -0.000997011 Jy ! Component: 1500 - total flux cleaned = -0.00097097 Jy ! Component: 1550 - total flux cleaned = -0.000920732 Jy ! Component: 1600 - total flux cleaned = -0.000945718 Jy ! Component: 1650 - total flux cleaned = -0.000921422 Jy ! Component: 1700 - total flux cleaned = -0.000921812 Jy ! Component: 1750 - total flux cleaned = -0.000946371 Jy ! Component: 1800 - total flux cleaned = -0.000994486 Jy ! Component: 1850 - total flux cleaned = -0.00101816 Jy ! Component: 1900 - total flux cleaned = -0.00108808 Jy ! Component: 1950 - total flux cleaned = -0.00113398 Jy ! Component: 2000 - total flux cleaned = -0.00113405 Jy ! Component: 2050 - total flux cleaned = -0.00117918 Jy ! Component: 2100 - total flux cleaned = -0.001246 Jy ! Component: 2150 - total flux cleaned = -0.00122374 Jy ! Component: 2200 - total flux cleaned = -0.00120176 Jy ! Component: 2250 - total flux cleaned = -0.00126694 Jy ! Component: 2300 - total flux cleaned = -0.00124522 Jy ! Component: 2350 - total flux cleaned = -0.00128754 Jy ! Component: 2400 - total flux cleaned = -0.00137175 Jy ! Component: 2450 - total flux cleaned = -0.00133045 Jy ! Component: 2500 - total flux cleaned = -0.00135109 Jy ! Component: 2550 - total flux cleaned = -0.00151479 Jy ! Component: 2600 - total flux cleaned = -0.00151444 Jy ! Component: 2650 - total flux cleaned = -0.00151421 Jy ! Component: 2700 - total flux cleaned = -0.00149445 Jy ! Component: 2750 - total flux cleaned = -0.00147454 Jy ! Component: 2800 - total flux cleaned = -0.00151382 Jy ! Component: 2850 - total flux cleaned = -0.00151387 Jy ! Component: 2900 - total flux cleaned = -0.00161002 Jy ! Component: 2950 - total flux cleaned = -0.00162914 Jy ! Component: 3000 - total flux cleaned = -0.00168577 Jy ! Component: 3050 - total flux cleaned = -0.00172326 Jy ! Component: 3100 - total flux cleaned = -0.00176068 Jy ! Component: 3150 - total flux cleaned = -0.00188992 Jy ! Component: 3200 - total flux cleaned = -0.00200006 Jy ! Component: 3250 - total flux cleaned = -0.00200012 Jy ! Component: 3300 - total flux cleaned = -0.00203635 Jy ! Component: 3350 - total flux cleaned = -0.00216213 Jy ! Component: 3400 - total flux cleaned = -0.00218012 Jy ! Component: 3450 - total flux cleaned = -0.00228632 Jy ! Component: 3500 - total flux cleaned = -0.00237434 Jy ! Component: 3550 - total flux cleaned = -0.00239165 Jy ! Component: 3600 - total flux cleaned = -0.00240897 Jy ! Component: 3650 - total flux cleaned = -0.00249521 Jy ! Component: 3700 - total flux cleaned = -0.00249515 Jy ! Component: 3750 - total flux cleaned = -0.0025973 Jy ! Component: 3800 - total flux cleaned = -0.00266494 Jy ! Component: 3850 - total flux cleaned = -0.00273207 Jy ! Component: 3900 - total flux cleaned = -0.00276558 Jy ! Component: 3950 - total flux cleaned = -0.00291506 Jy ! Component: 4000 - total flux cleaned = -0.00291519 Jy ! Component: 4050 - total flux cleaned = -0.00302998 Jy ! Total flux subtracted in 4096 components = -0.00309531 Jy ! Clean residual min=-0.001101 max=0.001297 Jy/beam ! Clean residual mean=-0.000002 rms=0.000299 Jy/beam ! Combined flux in latest and established models = 0.142361 Jy keep ! Adding 290 model components to the UV plane model. ! The established model now contains 358 components and 0.142361 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J0100-3337_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.032 x 7.686 at -4.868 degrees (North through East) ! Clean map min=-0.0018752 max=0.13816 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J0100-3337_S_map.fits wmodel /vlbi/uf001/uva//J0100-3337_S_map.mod ! Writing 358 model components to file: /vlbi/uf001/uva//J0100-3337_S_map.mod wobs /vlbi/uf001/uva//J0100-3337_S_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J0100-3337_S_uvs.fits wwins /vlbi/uf001/uva//J0100-3337_S_map.win ! wwins: Wrote 3 windows to /vlbi/uf001/uva//J0100-3337_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.138162 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000293891 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.638143 0.638143 1.27629 2.55257 5.10514 10.2103 20.4206 40.8412 81.6823 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.138 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 470.114 quit ! Quitting program ! Log file /vlbi/uf001/uva//J0100-3337_S_dfm.log closed on Sun Jan 13 20:48:10 2019