! Started logfile: /vlbi/uf001/uva//J0051-0650_X_dfm.log on Sun Jan 13 20:44:42 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J0051-0650_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J0051-0650_X_uva.fits ! AN table 1: 42 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.949206 visibilities/baseline/integration-bin. ! Found source: J0051-0650 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 21528 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0051-0650_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.225697Jy sigma=21.521057 ! Fit after self-cal, rms=0.359848Jy sigma=6.576445 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6558 mas, bmaj=1.638 mas, bpa=-1.128 degrees ! Estimated noise=0.47948 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.484866 Jy ! Component: 100 - total flux cleaned = 0.605909 Jy ! Total flux subtracted in 100 components = 0.605909 Jy ! Clean residual min=-0.021912 max=0.053843 Jy/beam ! Clean residual mean=0.000001 rms=0.004868 Jy/beam ! Combined flux in latest and established models = 0.605909 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.605909 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.170046Jy sigma=2.658795 ! Fit after self-cal, rms=0.169704Jy sigma=2.654855 ! Inverting map ! Added new window around map position (-0.6, 0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0601586 Jy ! Component: 100 - total flux cleaned = 0.0944381 Jy ! Total flux subtracted in 100 components = 0.0944381 Jy ! Clean residual min=-0.016818 max=0.025647 Jy/beam ! Clean residual mean=0.000003 rms=0.003619 Jy/beam ! Combined flux in latest and established models = 0.700347 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 14 components and 0.700347 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.129629Jy sigma=2.015737 ! Fit after self-cal, rms=0.129107Jy sigma=2.006362 ! Inverting map ! Added new window around map position (-1.6, -0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0261084 Jy ! Component: 100 - total flux cleaned = 0.0434008 Jy ! Total flux subtracted in 100 components = 0.0434008 Jy ! Clean residual min=-0.016554 max=0.021772 Jy/beam ! Clean residual mean=0.000004 rms=0.003251 Jy/beam ! Combined flux in latest and established models = 0.743748 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 23 components and 0.743748 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.118760Jy sigma=1.829625 ! Fit after self-cal, rms=0.118369Jy sigma=1.821390 ! Inverting map ! Added new window around map position (0.6, -2.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0196501 Jy ! Component: 100 - total flux cleaned = 0.0328878 Jy ! Total flux subtracted in 100 components = 0.0328878 Jy ! Clean residual min=-0.015058 max=0.017749 Jy/beam ! Clean residual mean=0.000004 rms=0.003028 Jy/beam ! Combined flux in latest and established models = 0.776636 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 28 components and 0.776636 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.111930Jy sigma=1.722255 ! Fit after self-cal, rms=0.111792Jy sigma=1.719843 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8249 mas, bmaj=1.948 mas, bpa=-1.245 degrees ! Estimated noise=0.302358 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6, -7.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0253064 Jy ! Component: 100 - total flux cleaned = 0.0431136 Jy ! Component: 150 - total flux cleaned = 0.0571212 Jy ! Component: 200 - total flux cleaned = 0.0683536 Jy ! Total flux subtracted in 200 components = 0.0683536 Jy ! Clean residual min=-0.014096 max=0.019071 Jy/beam ! Clean residual mean=0.000014 rms=0.003463 Jy/beam ! Combined flux in latest and established models = 0.844989 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 53 components and 0.844989 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.102353Jy sigma=1.578077 ! Fit after self-cal, rms=0.101847Jy sigma=1.567734 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8249 x 1.948 at -1.245 degrees (North through East) ! Clean map min=-0.013193 max=0.63728 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.03 HN 0.93 KP 1.01 ! LA 1.01 MK 1.02 NL 1.12 OV 0.94 ! PT 0.95 SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.02 HN 0.93 KP 1.01 ! LA 1.00 MK 1.02 NL 1.14 OV 0.95 ! PT 0.95 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.01 HN 0.93 KP 1.01 ! LA 1.00 MK 1.01 NL 1.12 OV 0.94 ! PT 0.95 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.01 HN 0.93 KP 1.02 ! LA 1.00 MK 1.01 NL 1.13 OV 0.95 ! PT 0.93 SC 1.01 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.02 HN 0.93 KP 1.02 ! LA 1.00 MK 1.00 NL 1.13 OV 0.95 ! PT 0.94 SC 1.01 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.01 HN 0.93 KP 1.02 ! LA 1.00 MK 1.00 NL 1.13 OV 0.94 ! PT 0.94 SC 1.01 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.01 HN 0.93 KP 1.02 ! LA 0.99 MK 1.00 NL 1.12 OV 0.94 ! PT 0.94 SC 1.00 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00 HN 0.93 KP 1.01 ! LA 1.00 MK 0.99 NL 1.12 OV 0.94 ! PT 0.95 SC 1.00 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00 HN 0.92 KP 1.01 ! LA 0.99 MK 0.99 NL 1.12 OV 0.94 ! PT 0.94 SC 1.00 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.01 HN 0.94 KP 1.01 ! LA 0.99 MK 0.98 NL 1.12 OV 0.94 ! PT 0.93 SC 1.00 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.01 HN 0.93 KP 1.00 ! LA 0.99 MK 0.99 NL 1.11 OV 0.93 ! PT 0.94 SC 1.00 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00 HN 0.93 KP 0.99 ! LA 1.00 MK 0.99 NL 1.11 OV 0.94 ! PT 0.94 SC 0.99 ! ! ! Fit before self-cal, rms=0.101847Jy sigma=1.567734 ! Fit after self-cal, rms=0.082579Jy sigma=1.300085 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8224 mas, bmaj=1.961 mas, bpa=-1.362 degrees ! Estimated noise=0.302873 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.6, 2.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0129002 Jy ! Component: 100 - total flux cleaned = 0.0144087 Jy ! Component: 150 - total flux cleaned = 0.0152447 Jy ! Component: 200 - total flux cleaned = 0.0152378 Jy ! Total flux subtracted in 200 components = 0.0152378 Jy ! Clean residual min=-0.009681 max=0.010031 Jy/beam ! Clean residual mean=0.000008 rms=0.002004 Jy/beam ! Combined flux in latest and established models = 0.860227 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 71 components and 0.860227 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077792Jy sigma=1.223182 ! Fit after self-cal, rms=0.077417Jy sigma=1.217269 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077417Jy sigma=1.217269 ! Fit after self-cal, rms=0.062464Jy sigma=1.066827 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8228 mas, bmaj=1.96 mas, bpa=-1.25 degrees ! Estimated noise=0.3021 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00317215 Jy ! Component: 100 - total flux cleaned = 0.00316516 Jy ! Component: 150 - total flux cleaned = 0.00246404 Jy ! Component: 200 - total flux cleaned = 0.0019992 Jy ! Total flux subtracted in 200 components = 0.0019992 Jy ! Clean residual min=-0.005234 max=0.006483 Jy/beam ! Clean residual mean=0.000010 rms=0.001184 Jy/beam ! Combined flux in latest and established models = 0.862226 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 92 components and 0.862226 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061309Jy sigma=1.045224 ! Fit after self-cal, rms=0.061231Jy sigma=1.044294 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.6, -9.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0061839 Jy ! Component: 100 - total flux cleaned = 0.00970319 Jy ! Component: 150 - total flux cleaned = 0.0115532 Jy ! Component: 200 - total flux cleaned = 0.012584 Jy ! Total flux subtracted in 200 components = 0.012584 Jy ! Clean residual min=-0.004613 max=0.004989 Jy/beam ! Clean residual mean=0.000009 rms=0.001039 Jy/beam ! Combined flux in latest and established models = 0.87481 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 111 components and 0.87481 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060335Jy sigma=1.029047 ! Fit after self-cal, rms=0.060309Jy sigma=1.028619 ! Inverting map ! Added new window around map position (-12, 14.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00415955 Jy ! Component: 100 - total flux cleaned = 0.00535084 Jy ! Component: 150 - total flux cleaned = 0.00631212 Jy ! Component: 200 - total flux cleaned = 0.00687023 Jy ! Total flux subtracted in 200 components = 0.00687023 Jy ! Clean residual min=-0.004137 max=0.004440 Jy/beam ! Clean residual mean=0.000008 rms=0.000929 Jy/beam ! Combined flux in latest and established models = 0.881681 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 133 components and 0.88168 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059691Jy sigma=1.018530 ! Fit after self-cal, rms=0.059669Jy sigma=1.018214 ! Inverting map ! Added new window around map position (-9.4, 6.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00418998 Jy ! Component: 100 - total flux cleaned = 0.00535852 Jy ! Component: 150 - total flux cleaned = 0.00566666 Jy ! Component: 200 - total flux cleaned = 0.00605173 Jy ! Total flux subtracted in 200 components = 0.00605173 Jy ! Clean residual min=-0.003758 max=0.003924 Jy/beam ! Clean residual mean=0.000007 rms=0.000853 Jy/beam ! Combined flux in latest and established models = 0.887732 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 153 components and 0.887732 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059209Jy sigma=1.010843 ! Fit after self-cal, rms=0.059190Jy sigma=1.010597 ! Inverting map ! Added new window around map position (-5.8, 4.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00332981 Jy ! Component: 100 - total flux cleaned = 0.00453777 Jy ! Component: 150 - total flux cleaned = 0.00547932 Jy ! Component: 200 - total flux cleaned = 0.00576844 Jy ! Total flux subtracted in 200 components = 0.00576844 Jy ! Clean residual min=-0.003371 max=0.003313 Jy/beam ! Clean residual mean=0.000006 rms=0.000774 Jy/beam ! Combined flux in latest and established models = 0.893501 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 180 components and 0.893501 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058724Jy sigma=1.003027 ! Fit after self-cal, rms=0.058708Jy sigma=1.002809 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058708Jy sigma=1.002809 ! Fit after self-cal, rms=0.057950Jy sigma=0.995430 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8227 mas, bmaj=1.961 mas, bpa=-1.208 degrees ! Estimated noise=0.301393 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00196134 Jy ! Component: 100 - total flux cleaned = -0.00197593 Jy ! Component: 150 - total flux cleaned = -0.00169857 Jy ! Component: 200 - total flux cleaned = -0.00135571 Jy ! Total flux subtracted in 200 components = -0.00135571 Jy ! Clean residual min=-0.003010 max=0.003214 Jy/beam ! Clean residual mean=0.000006 rms=0.000660 Jy/beam ! Combined flux in latest and established models = 0.892145 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 192 components and 0.892145 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057631Jy sigma=0.989823 ! Fit after self-cal, rms=0.057618Jy sigma=0.989626 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.4, 13). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.001535 Jy ! Component: 100 - total flux cleaned = 0.00195759 Jy ! Component: 150 - total flux cleaned = 0.00227221 Jy ! Component: 200 - total flux cleaned = 0.00278194 Jy ! Total flux subtracted in 200 components = 0.00278194 Jy ! Clean residual min=-0.002871 max=0.002422 Jy/beam ! Clean residual mean=0.000005 rms=0.000614 Jy/beam ! Combined flux in latest and established models = 0.894927 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 211 components and 0.894927 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057379Jy sigma=0.985354 ! Fit after self-cal, rms=0.057375Jy sigma=0.985284 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057375Jy sigma=0.985284 ! Fit after self-cal, rms=0.057231Jy sigma=0.984651 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.082 mas, bmaj=3.55 mas, bpa=2.681 degrees ! Estimated noise=0.412245 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00015932 Jy ! Component: 100 - total flux cleaned = 4.13809e-05 Jy ! Component: 150 - total flux cleaned = 0.000217743 Jy ! Component: 200 - total flux cleaned = 0.000138656 Jy ! Total flux subtracted in 200 components = 0.000138656 Jy ! Clean residual min=-0.003633 max=0.003388 Jy/beam ! Clean residual mean=0.000010 rms=0.000908 Jy/beam ! Combined flux in latest and established models = 0.895066 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 237 components and 0.895066 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057106Jy sigma=0.982370 ! Fit after self-cal, rms=0.057092Jy sigma=0.982119 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.05872e-06 Jy ! Component: 100 - total flux cleaned = -4.81659e-06 Jy ! Component: 150 - total flux cleaned = 6.65395e-05 Jy ! Component: 200 - total flux cleaned = 6.76174e-05 Jy ! Total flux subtracted in 200 components = 6.76174e-05 Jy ! Clean residual min=-0.003504 max=0.003165 Jy/beam ! Clean residual mean=0.000009 rms=0.000856 Jy/beam ! Combined flux in latest and established models = 0.895134 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 256 components and 0.895134 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057030Jy sigma=0.981079 ! Fit after self-cal, rms=0.057024Jy sigma=0.980986 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8229 mas, bmaj=1.961 mas, bpa=-1.172 degrees ! Estimated noise=0.301006 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8229 x 1.961 at -1.172 degrees (North through East) ! Clean map min=-0.0032775 max=0.63857 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057024Jy sigma=0.980986 ! Fit after self-cal, rms=0.053775Jy sigma=0.913671 ! Inverting map and beam ! Estimated beam: bmin=0.8228 mas, bmaj=1.961 mas, bpa=-1.187 degrees ! Estimated noise=0.300795 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0018666 Jy ! Component: 100 - total flux cleaned = -0.00219519 Jy ! Component: 150 - total flux cleaned = -0.00219401 Jy ! Component: 200 - total flux cleaned = -0.00202674 Jy ! Total flux subtracted in 200 components = -0.00202674 Jy ! Clean residual min=-0.002484 max=0.002177 Jy/beam ! Clean residual mean=0.000003 rms=0.000514 Jy/beam ! Combined flux in latest and established models = 0.893107 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 268 components and 0.893107 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053636Jy sigma=0.911217 ! Fit after self-cal, rms=0.053631Jy sigma=0.911135 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000234216 Jy ! Component: 100 - total flux cleaned = -8.06436e-05 Jy ! Component: 150 - total flux cleaned = 1.72231e-05 Jy ! Component: 200 - total flux cleaned = 0.000248422 Jy ! Total flux subtracted in 200 components = 0.000248422 Jy ! Clean residual min=-0.002384 max=0.002224 Jy/beam ! Clean residual mean=0.000003 rms=0.000500 Jy/beam ! Combined flux in latest and established models = 0.893355 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 278 components and 0.893355 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053549Jy sigma=0.909744 ! Fit after self-cal, rms=0.053547Jy sigma=0.909716 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053547Jy sigma=0.909716 ! Fit after self-cal, rms=0.053487Jy sigma=0.909417 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6544 mas, bmaj=1.648 mas, bpa=-1.001 degrees ! Estimated noise=0.478208 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.483264 Jy ! Component: 100 - total flux cleaned = 0.608802 Jy ! Component: 150 - total flux cleaned = 0.670067 Jy ! Component: 200 - total flux cleaned = 0.704551 Jy ! Total flux subtracted in 200 components = 0.704551 Jy ! Clean residual min=-0.007909 max=0.018403 Jy/beam ! Clean residual mean=0.000002 rms=0.002020 Jy/beam ! Combined flux in latest and established models = 0.704551 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.704551 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8229 mas, bmaj=1.962 mas, bpa=-1.164 degrees ! Estimated noise=0.30062 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0391396 Jy ! Component: 100 - total flux cleaned = 0.0644358 Jy ! Component: 150 - total flux cleaned = 0.0822069 Jy ! Component: 200 - total flux cleaned = 0.0954857 Jy ! Total flux subtracted in 200 components = 0.0954857 Jy ! Clean residual min=-0.004819 max=0.007828 Jy/beam ! Clean residual mean=0.000015 rms=0.001587 Jy/beam ! Combined flux in latest and established models = 0.800036 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 59 components and 0.800036 Jy ! Inverting map ! Added new window around map position (-2.8, 1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0105539 Jy ! Component: 100 - total flux cleaned = 0.0191975 Jy ! Component: 150 - total flux cleaned = 0.0264419 Jy ! Component: 200 - total flux cleaned = 0.0327226 Jy ! Total flux subtracted in 200 components = 0.0327226 Jy ! Clean residual min=-0.003415 max=0.004496 Jy/beam ! Clean residual mean=0.000011 rms=0.001046 Jy/beam ! Combined flux in latest and established models = 0.832759 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 100 components and 0.832759 Jy ! Inverting map ! Added new window around map position (-6.4, 8.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00561512 Jy ! Component: 100 - total flux cleaned = 0.0105667 Jy ! Component: 150 - total flux cleaned = 0.015027 Jy ! Component: 200 - total flux cleaned = 0.0190582 Jy ! Total flux subtracted in 200 components = 0.0190582 Jy ! Clean residual min=-0.002813 max=0.003107 Jy/beam ! Clean residual mean=0.000008 rms=0.000788 Jy/beam ! Combined flux in latest and established models = 0.851817 Jy ! Adding 59 model components to the UV plane model. ! The established model now contains 137 components and 0.851817 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.082 mas, bmaj=3.552 mas, bpa=2.674 degrees ! Estimated noise=0.411737 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.006873 Jy ! Component: 100 - total flux cleaned = 0.0122465 Jy ! Component: 150 - total flux cleaned = 0.0166731 Jy ! Component: 200 - total flux cleaned = 0.0203924 Jy ! Total flux subtracted in 200 components = 0.0203924 Jy ! Clean residual min=-0.003276 max=0.003733 Jy/beam ! Clean residual mean=0.000012 rms=0.001028 Jy/beam ! Combined flux in latest and established models = 0.87221 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00315623 Jy ! Component: 100 - total flux cleaned = 0.00576584 Jy ! Component: 150 - total flux cleaned = 0.00779066 Jy ! Component: 200 - total flux cleaned = 0.00960222 Jy ! Total flux subtracted in 200 components = 0.00960222 Jy ! Clean residual min=-0.002862 max=0.003343 Jy/beam ! Clean residual mean=0.000009 rms=0.000835 Jy/beam ! Combined flux in latest and established models = 0.881812 Jy ! Adding 129 model components to the UV plane model. ! The established model now contains 251 components and 0.881812 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8229 mas, bmaj=1.962 mas, bpa=-1.164 degrees ! Estimated noise=0.30062 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00209778 Jy ! Component: 100 - total flux cleaned = 0.00366745 Jy ! Component: 150 - total flux cleaned = 0.00451851 Jy ! Component: 200 - total flux cleaned = 0.0051368 Jy ! Total flux subtracted in 200 components = 0.0051368 Jy ! Clean residual min=-0.002128 max=0.002271 Jy/beam ! Clean residual mean=0.000003 rms=0.000477 Jy/beam ! Combined flux in latest and established models = 0.886949 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 283 components and 0.886949 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053406Jy sigma=0.908391 ! Fit after self-cal, rms=0.053284Jy sigma=0.906303 wmodel J0051-0650_X_map.mod ! Writing 283 model components to file: J0051-0650_X_map.mod wobs J0051-0650_X_uvs.fits ! Writing UV FITS file: J0051-0650_X_uvs.fits wwins J0051-0650_X_map.win ! wwins: Wrote 13 windows to J0051-0650_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00024439 Jy ! Component: 100 - total flux cleaned = -0.000313719 Jy ! Component: 150 - total flux cleaned = -0.000517686 Jy ! Component: 200 - total flux cleaned = -0.000678482 Jy ! Component: 250 - total flux cleaned = -0.000678721 Jy ! Component: 300 - total flux cleaned = -0.000679058 Jy ! Component: 350 - total flux cleaned = -0.000708258 Jy ! Component: 400 - total flux cleaned = -0.000652832 Jy ! Component: 450 - total flux cleaned = -0.000625816 Jy ! Component: 500 - total flux cleaned = -0.000546417 Jy ! Component: 550 - total flux cleaned = -0.000546105 Jy ! Component: 600 - total flux cleaned = -0.000444749 Jy ! Component: 650 - total flux cleaned = -0.000321217 Jy ! Component: 700 - total flux cleaned = -0.000320936 Jy ! Component: 750 - total flux cleaned = -0.0002961 Jy ! Component: 800 - total flux cleaned = -0.000225793 Jy ! Component: 850 - total flux cleaned = -0.000225923 Jy ! Component: 900 - total flux cleaned = -0.000203545 Jy ! Component: 950 - total flux cleaned = -0.000137207 Jy ! Component: 1000 - total flux cleaned = -2.79753e-05 Jy ! Component: 1050 - total flux cleaned = 5.77972e-05 Jy ! Component: 1100 - total flux cleaned = 0.000100069 Jy ! Component: 1150 - total flux cleaned = 0.000141761 Jy ! Component: 1200 - total flux cleaned = 0.000203965 Jy ! Component: 1250 - total flux cleaned = 0.000265076 Jy ! Component: 1300 - total flux cleaned = 0.000305831 Jy ! Component: 1350 - total flux cleaned = 0.000385494 Jy ! Component: 1400 - total flux cleaned = 0.000385932 Jy ! Component: 1450 - total flux cleaned = 0.000463913 Jy ! Component: 1500 - total flux cleaned = 0.000579055 Jy ! Component: 1550 - total flux cleaned = 0.000597664 Jy ! Component: 1600 - total flux cleaned = 0.000691184 Jy ! Component: 1650 - total flux cleaned = 0.000672366 Jy ! Component: 1700 - total flux cleaned = 0.000709162 Jy ! Component: 1750 - total flux cleaned = 0.000726976 Jy ! Component: 1800 - total flux cleaned = 0.000727295 Jy ! Component: 1850 - total flux cleaned = 0.00074535 Jy ! Component: 1900 - total flux cleaned = 0.000763065 Jy ! Component: 1950 - total flux cleaned = 0.00072822 Jy ! Component: 2000 - total flux cleaned = 0.000763155 Jy ! Component: 2050 - total flux cleaned = 0.000746206 Jy ! Component: 2100 - total flux cleaned = 0.000830662 Jy ! Component: 2150 - total flux cleaned = 0.000913948 Jy ! Component: 2200 - total flux cleaned = 0.000797816 Jy ! Component: 2250 - total flux cleaned = 0.00081437 Jy ! Component: 2300 - total flux cleaned = 0.000830699 Jy ! Component: 2350 - total flux cleaned = 0.000878804 Jy ! Component: 2400 - total flux cleaned = 0.000846525 Jy ! Component: 2450 - total flux cleaned = 0.000798968 Jy ! Component: 2500 - total flux cleaned = 0.000846312 Jy ! Component: 2550 - total flux cleaned = 0.000768095 Jy ! Component: 2600 - total flux cleaned = 0.000845398 Jy ! Component: 2650 - total flux cleaned = 0.000830047 Jy ! Component: 2700 - total flux cleaned = 0.000723115 Jy ! Component: 2750 - total flux cleaned = 0.000783999 Jy ! Component: 2800 - total flux cleaned = 0.000753873 Jy ! Component: 2850 - total flux cleaned = 0.000664408 Jy ! Component: 2900 - total flux cleaned = 0.000708961 Jy ! Component: 2950 - total flux cleaned = 0.000723561 Jy ! Component: 3000 - total flux cleaned = 0.000635753 Jy ! Component: 3050 - total flux cleaned = 0.000621199 Jy ! Component: 3100 - total flux cleaned = 0.000549274 Jy ! Component: 3150 - total flux cleaned = 0.00062076 Jy ! Component: 3200 - total flux cleaned = 0.000563815 Jy ! Component: 3250 - total flux cleaned = 0.000507388 Jy ! Component: 3300 - total flux cleaned = 0.000521401 Jy ! Component: 3350 - total flux cleaned = 0.000535397 Jy ! Component: 3400 - total flux cleaned = 0.000507739 Jy ! Component: 3450 - total flux cleaned = 0.000452777 Jy ! Component: 3500 - total flux cleaned = 0.00039836 Jy ! Component: 3550 - total flux cleaned = 0.00045256 Jy ! Component: 3600 - total flux cleaned = 0.000412076 Jy ! Component: 3650 - total flux cleaned = 0.000425401 Jy ! Component: 3700 - total flux cleaned = 0.000398692 Jy ! Component: 3750 - total flux cleaned = 0.000398789 Jy ! Component: 3800 - total flux cleaned = 0.000385679 Jy ! Component: 3850 - total flux cleaned = 0.000372626 Jy ! Component: 3900 - total flux cleaned = 0.000359714 Jy ! Component: 3950 - total flux cleaned = 0.000398322 Jy ! Component: 4000 - total flux cleaned = 0.00041127 Jy ! Component: 4050 - total flux cleaned = 0.000411213 Jy ! Total flux subtracted in 4096 components = 0.000411122 Jy ! Clean residual min=-0.000764 max=0.000716 Jy/beam ! Clean residual mean=0.000000 rms=0.000224 Jy/beam ! Combined flux in latest and established models = 0.88736 Jy keep ! Adding 346 model components to the UV plane model. ! The established model now contains 629 components and 0.88736 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J0051-0650_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8229 x 1.962 at -1.164 degrees (North through East) ! Clean map min=-0.0012756 max=0.64325 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J0051-0650_X_map.fits wmodel /vlbi/uf001/uva//J0051-0650_X_map.mod ! Writing 629 model components to file: /vlbi/uf001/uva//J0051-0650_X_map.mod wobs /vlbi/uf001/uva//J0051-0650_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J0051-0650_X_uvs.fits wwins /vlbi/uf001/uva//J0051-0650_X_map.win ! wwins: Wrote 14 windows to /vlbi/uf001/uva//J0051-0650_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.64325 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00022371 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.104334 0.104334 0.208669 0.417337 0.834675 1.66935 3.3387 6.6774 13.3548 26.7096 53.4192 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.643 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2875.37 quit ! Quitting program ! Log file /vlbi/uf001/uva//J0051-0650_X_dfm.log closed on Sun Jan 13 20:44:48 2019