! Started logfile: /vlbi/uf001/uva//J0049-3116_S_dfm.log on Sun Jan 13 20:44:02 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /vlbi/uf001/uva//J0049-3116_S_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J0049-3116_S_uva.fits ! AN table 1: 48 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.895833 visibilities/baseline/integration-bin. ! Found source: J0049-3116 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 5805 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0049-3116_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.014379Jy sigma=13.908883 ! Fit after self-cal, rms=0.871941Jy sigma=11.837811 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.456 mas, bmaj=6.598 mas, bpa=-6.987 degrees ! Estimated noise=0.973053 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0997709 Jy ! Component: 100 - total flux cleaned = 0.128053 Jy ! Total flux subtracted in 100 components = 0.128053 Jy ! Clean residual min=-0.007215 max=0.012370 Jy/beam ! Clean residual mean=-0.000067 rms=0.002155 Jy/beam ! Combined flux in latest and established models = 0.128053 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.128053 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.097333Jy sigma=1.268052 ! Fit after self-cal, rms=0.097258Jy sigma=1.267284 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.925 mas, bmaj=7.741 mas, bpa=-5.868 degrees ! Estimated noise=0.69012 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0180637 Jy ! Component: 100 - total flux cleaned = 0.0269776 Jy ! Component: 150 - total flux cleaned = 0.0317601 Jy ! Component: 200 - total flux cleaned = 0.0343773 Jy ! Total flux subtracted in 200 components = 0.0343773 Jy ! Clean residual min=-0.005803 max=0.007433 Jy/beam ! Clean residual mean=-0.000027 rms=0.001468 Jy/beam ! Combined flux in latest and established models = 0.162431 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 41 components and 0.162431 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.094604Jy sigma=1.215691 ! Fit after self-cal, rms=0.094585Jy sigma=1.215254 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.925 x 7.741 at -5.868 degrees (North through East) ! Clean map min=-0.0055859 max=0.12968 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.96 HN 1.38 KP 1.00 ! LA 0.84 MK 0.98 NL 1.07 OV 1.00 ! PT 1.01 SC 0.89 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.92 HN 1.37 KP 0.97 ! LA 0.90 MK 1.02 NL 1.05 OV 0.94 ! PT 1.02 SC 0.89 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.96 HN 1.26 KP 0.93 ! LA 0.92 MK 1.00 NL 0.99 OV 0.97 ! PT 1.02 SC 0.94 ! ! ! Fit before self-cal, rms=0.094585Jy sigma=1.215254 ! Fit after self-cal, rms=0.100859Jy sigma=1.192951 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.929 mas, bmaj=7.606 mas, bpa=-4.813 degrees ! Estimated noise=0.683068 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000311218 Jy ! Component: 100 - total flux cleaned = -0.000387916 Jy ! Component: 150 - total flux cleaned = -0.000450898 Jy ! Component: 200 - total flux cleaned = -0.000548111 Jy ! Total flux subtracted in 200 components = -0.000548111 Jy ! Clean residual min=-0.003185 max=0.003626 Jy/beam ! Clean residual mean=0.000011 rms=0.000833 Jy/beam ! Combined flux in latest and established models = 0.161883 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 49 components and 0.161883 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.100753Jy sigma=1.191679 ! Fit after self-cal, rms=0.101043Jy sigma=1.191138 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.101043Jy sigma=1.191138 ! Fit after self-cal, rms=0.104823Jy sigma=1.186449 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.922 mas, bmaj=7.631 mas, bpa=-4.773 degrees ! Estimated noise=0.682487 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.70652e-05 Jy ! Component: 100 - total flux cleaned = -3.21411e-05 Jy ! Component: 150 - total flux cleaned = -8.3657e-05 Jy ! Component: 200 - total flux cleaned = -0.000150147 Jy ! Total flux subtracted in 200 components = -0.000150147 Jy ! Clean residual min=-0.002721 max=0.003062 Jy/beam ! Clean residual mean=-0.000002 rms=0.000696 Jy/beam ! Combined flux in latest and established models = 0.161733 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 54 components and 0.161733 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.104806Jy sigma=1.186254 ! Fit after self-cal, rms=0.104871Jy sigma=1.186134 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-70.5, -57). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00218807 Jy ! Component: 100 - total flux cleaned = 0.0022898 Jy ! Component: 150 - total flux cleaned = 0.00225203 Jy ! Component: 200 - total flux cleaned = 0.0022179 Jy ! Total flux subtracted in 200 components = 0.0022179 Jy ! Clean residual min=-0.002762 max=0.002512 Jy/beam ! Clean residual mean=-0.000007 rms=0.000658 Jy/beam ! Combined flux in latest and established models = 0.16395 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 79 components and 0.16395 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.104785Jy sigma=1.185063 ! Fit after self-cal, rms=0.104763Jy sigma=1.184930 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.104763Jy sigma=1.184930 ! Fit after self-cal, rms=0.104855Jy sigma=1.184817 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.917 mas, bmaj=7.606 mas, bpa=-4.722 degrees ! Estimated noise=0.680564 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000689704 Jy ! Component: 100 - total flux cleaned = 0.000655549 Jy ! Component: 150 - total flux cleaned = 0.000654886 Jy ! Component: 200 - total flux cleaned = 0.000624157 Jy ! Total flux subtracted in 200 components = 0.000624157 Jy ! Clean residual min=-0.002684 max=0.002535 Jy/beam ! Clean residual mean=-0.000007 rms=0.000639 Jy/beam ! Combined flux in latest and established models = 0.164575 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 87 components and 0.164575 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.104824Jy sigma=1.184506 ! Fit after self-cal, rms=0.104822Jy sigma=1.184481 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000107151 Jy ! Component: 100 - total flux cleaned = 7.98751e-05 Jy ! Component: 150 - total flux cleaned = 3.05391e-05 Jy ! Component: 200 - total flux cleaned = 7.33762e-06 Jy ! Total flux subtracted in 200 components = 7.33762e-06 Jy ! Clean residual min=-0.002652 max=0.002568 Jy/beam ! Clean residual mean=-0.000007 rms=0.000635 Jy/beam ! Combined flux in latest and established models = 0.164582 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 97 components and 0.164582 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.104805Jy sigma=1.184338 ! Fit after self-cal, rms=0.104799Jy sigma=1.184332 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.104799Jy sigma=1.184332 ! Fit after self-cal, rms=0.104814Jy sigma=1.184297 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.663 mas, bmaj=19.8 mas, bpa=-0.5417 degrees ! Estimated noise=0.889963 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.97488e-05 Jy ! Component: 100 - total flux cleaned = 0.000123159 Jy ! Component: 150 - total flux cleaned = 0.000190212 Jy ! Component: 200 - total flux cleaned = 0.000227318 Jy ! Total flux subtracted in 200 components = 0.000227318 Jy ! Clean residual min=-0.002546 max=0.002516 Jy/beam ! Clean residual mean=-0.000017 rms=0.000708 Jy/beam ! Combined flux in latest and established models = 0.164809 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 104 components and 0.164809 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.104807Jy sigma=1.184303 ! Fit after self-cal, rms=0.104810Jy sigma=1.184281 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.37815e-05 Jy ! Component: 100 - total flux cleaned = 1.28181e-05 Jy ! Component: 150 - total flux cleaned = 4.35854e-05 Jy ! Component: 200 - total flux cleaned = 5.70069e-05 Jy ! Total flux subtracted in 200 components = 5.70069e-05 Jy ! Clean residual min=-0.002535 max=0.002488 Jy/beam ! Clean residual mean=-0.000018 rms=0.000705 Jy/beam ! Combined flux in latest and established models = 0.164866 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 111 components and 0.164866 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.104807Jy sigma=1.184311 ! Fit after self-cal, rms=0.104806Jy sigma=1.184295 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=2.916 mas, bmaj=7.596 mas, bpa=-4.672 degrees ! Estimated noise=0.679786 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.916 x 7.596 at -4.672 degrees (North through East) ! Clean map min=-0.0025682 max=0.12921 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.45 mas, bmaj=6.455 mas, bpa=-5.591 degrees ! Estimated noise=0.960343 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0988474 Jy ! Component: 100 - total flux cleaned = 0.129493 Jy ! Component: 150 - total flux cleaned = 0.142489 Jy ! Component: 200 - total flux cleaned = 0.150203 Jy ! Total flux subtracted in 200 components = 0.150203 Jy ! Clean residual min=-0.004848 max=0.004834 Jy/beam ! Clean residual mean=-0.000022 rms=0.001134 Jy/beam ! Combined flux in latest and established models = 0.150203 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 37 model components to the UV plane model. ! The established model now contains 37 components and 0.150203 Jy ! Inverting map and beam ! Estimated beam: bmin=2.916 mas, bmaj=7.596 mas, bpa=-4.672 degrees ! Estimated noise=0.679786 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2, -6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00656709 Jy ! Component: 100 - total flux cleaned = 0.0103008 Jy ! Component: 150 - total flux cleaned = 0.0120822 Jy ! Component: 200 - total flux cleaned = 0.0128175 Jy ! Total flux subtracted in 200 components = 0.0128175 Jy ! Clean residual min=-0.002845 max=0.002781 Jy/beam ! Clean residual mean=-0.000010 rms=0.000675 Jy/beam ! Combined flux in latest and established models = 0.16302 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 72 components and 0.16302 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.663 mas, bmaj=19.8 mas, bpa=-0.5417 degrees ! Estimated noise=0.889963 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00123768 Jy ! Component: 100 - total flux cleaned = 0.00132935 Jy ! Component: 150 - total flux cleaned = 0.0013678 Jy ! Component: 200 - total flux cleaned = 0.00140031 Jy ! Total flux subtracted in 200 components = 0.00140031 Jy ! Clean residual min=-0.002724 max=0.002608 Jy/beam ! Clean residual mean=-0.000018 rms=0.000716 Jy/beam ! Combined flux in latest and established models = 0.16442 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.01268e-05 Jy ! Component: 100 - total flux cleaned = 5.68179e-05 Jy ! Component: 150 - total flux cleaned = 8.08824e-05 Jy ! Component: 200 - total flux cleaned = 0.000105041 Jy ! Total flux subtracted in 200 components = 0.000105041 Jy ! Clean residual min=-0.002674 max=0.002606 Jy/beam ! Clean residual mean=-0.000019 rms=0.000708 Jy/beam ! Combined flux in latest and established models = 0.164525 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 98 components and 0.164525 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.916 mas, bmaj=7.596 mas, bpa=-4.672 degrees ! Estimated noise=0.679786 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000102024 Jy ! Component: 100 - total flux cleaned = -0.000102212 Jy ! Component: 150 - total flux cleaned = -0.000100262 Jy ! Component: 200 - total flux cleaned = -0.000136476 Jy ! Total flux subtracted in 200 components = -0.000136476 Jy ! Clean residual min=-0.002684 max=0.002744 Jy/beam ! Clean residual mean=-0.000008 rms=0.000638 Jy/beam ! Combined flux in latest and established models = 0.164389 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 113 components and 0.164389 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.104816Jy sigma=1.184556 ! Fit after self-cal, rms=0.104810Jy sigma=1.184440 wmodel J0049-3116_S_map.mod ! Writing 113 model components to file: J0049-3116_S_map.mod wobs J0049-3116_S_uvs.fits ! Writing UV FITS file: J0049-3116_S_uvs.fits wwins J0049-3116_S_map.win ! wwins: Wrote 3 windows to J0049-3116_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000151509 Jy ! Component: 100 - total flux cleaned = -6.98443e-05 Jy ! Component: 150 - total flux cleaned = -0.000572894 Jy ! Component: 200 - total flux cleaned = -0.00117431 Jy ! Component: 250 - total flux cleaned = -0.00183209 Jy ! Component: 300 - total flux cleaned = -0.00235835 Jy ! Component: 350 - total flux cleaned = -0.00283323 Jy ! Component: 400 - total flux cleaned = -0.0032599 Jy ! Component: 450 - total flux cleaned = -0.00371028 Jy ! Component: 500 - total flux cleaned = -0.0040152 Jy ! Component: 550 - total flux cleaned = -0.00441065 Jy ! Component: 600 - total flux cleaned = -0.00476429 Jy ! Component: 650 - total flux cleaned = -0.00504757 Jy ! Component: 700 - total flux cleaned = -0.00535589 Jy ! Component: 750 - total flux cleaned = -0.00562784 Jy ! Component: 800 - total flux cleaned = -0.00589401 Jy ! Component: 850 - total flux cleaned = -0.00615524 Jy ! Component: 900 - total flux cleaned = -0.00638296 Jy ! Component: 950 - total flux cleaned = -0.00652276 Jy ! Component: 1000 - total flux cleaned = -0.00668811 Jy ! Component: 1050 - total flux cleaned = -0.00685113 Jy ! Component: 1100 - total flux cleaned = -0.0070911 Jy ! Component: 1150 - total flux cleaned = -0.0071169 Jy ! Component: 1200 - total flux cleaned = -0.00729867 Jy ! Component: 1250 - total flux cleaned = -0.00745165 Jy ! Component: 1300 - total flux cleaned = -0.00755227 Jy ! Component: 1350 - total flux cleaned = -0.0077261 Jy ! Component: 1400 - total flux cleaned = -0.00787256 Jy ! Component: 1450 - total flux cleaned = -0.00801724 Jy ! Component: 1500 - total flux cleaned = -0.00820725 Jy ! Component: 1550 - total flux cleaned = -0.00834794 Jy ! Component: 1600 - total flux cleaned = -0.00844038 Jy ! Component: 1650 - total flux cleaned = -0.00855517 Jy ! Component: 1700 - total flux cleaned = -0.00869076 Jy ! Component: 1750 - total flux cleaned = -0.00882494 Jy ! Component: 1800 - total flux cleaned = -0.00880265 Jy ! Component: 1850 - total flux cleaned = -0.00891192 Jy ! Component: 1900 - total flux cleaned = -0.00897689 Jy ! Component: 1950 - total flux cleaned = -0.00904131 Jy ! Component: 2000 - total flux cleaned = -0.00912605 Jy ! Component: 2050 - total flux cleaned = -0.00914694 Jy ! Component: 2100 - total flux cleaned = -0.00929251 Jy ! Component: 2150 - total flux cleaned = -0.00935422 Jy ! Component: 2200 - total flux cleaned = -0.00935433 Jy ! Component: 2250 - total flux cleaned = -0.00953596 Jy ! Component: 2300 - total flux cleaned = -0.00961592 Jy ! Component: 2350 - total flux cleaned = -0.00969528 Jy ! Component: 2400 - total flux cleaned = -0.00979334 Jy ! Component: 2450 - total flux cleaned = -0.00979313 Jy ! Component: 2500 - total flux cleaned = -0.00992819 Jy ! Component: 2550 - total flux cleaned = -0.00992795 Jy ! Component: 2600 - total flux cleaned = -0.00996598 Jy ! Component: 2650 - total flux cleaned = -0.0100226 Jy ! Component: 2700 - total flux cleaned = -0.0100598 Jy ! Component: 2750 - total flux cleaned = -0.0101341 Jy ! Component: 2800 - total flux cleaned = -0.0101157 Jy ! Component: 2850 - total flux cleaned = -0.0101704 Jy ! Component: 2900 - total flux cleaned = -0.0101523 Jy ! Component: 2950 - total flux cleaned = -0.0103144 Jy ! Component: 3000 - total flux cleaned = -0.0102787 Jy ! Component: 3050 - total flux cleaned = -0.0103142 Jy ! Component: 3100 - total flux cleaned = -0.0103671 Jy ! Component: 3150 - total flux cleaned = -0.0104198 Jy ! Component: 3200 - total flux cleaned = -0.010472 Jy ! Component: 3250 - total flux cleaned = -0.0105065 Jy ! Component: 3300 - total flux cleaned = -0.0105066 Jy ! Component: 3350 - total flux cleaned = -0.0105579 Jy ! Component: 3400 - total flux cleaned = -0.010575 Jy ! Component: 3450 - total flux cleaned = -0.0106255 Jy ! Component: 3500 - total flux cleaned = -0.0106591 Jy ! Component: 3550 - total flux cleaned = -0.0106757 Jy ! Component: 3600 - total flux cleaned = -0.0107089 Jy ! Component: 3650 - total flux cleaned = -0.0106593 Jy ! Component: 3700 - total flux cleaned = -0.0106755 Jy ! Component: 3750 - total flux cleaned = -0.010659 Jy ! Component: 3800 - total flux cleaned = -0.0106752 Jy ! Component: 3850 - total flux cleaned = -0.0106753 Jy ! Component: 3900 - total flux cleaned = -0.0107557 Jy ! Component: 3950 - total flux cleaned = -0.0107236 Jy ! Component: 4000 - total flux cleaned = -0.0106917 Jy ! Component: 4050 - total flux cleaned = -0.0106917 Jy ! Total flux subtracted in 4096 components = -0.0107233 Jy ! Clean residual min=-0.000965 max=0.000866 Jy/beam ! Clean residual mean=0.000003 rms=0.000282 Jy/beam ! Combined flux in latest and established models = 0.153666 Jy keep ! Adding 278 model components to the UV plane model. ! The established model now contains 391 components and 0.153666 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J0049-3116_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.916 x 7.596 at -4.672 degrees (North through East) ! Clean map min=-0.0020298 max=0.12711 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J0049-3116_S_map.fits wmodel /vlbi/uf001/uva//J0049-3116_S_map.mod ! Writing 391 model components to file: /vlbi/uf001/uva//J0049-3116_S_map.mod wobs /vlbi/uf001/uva//J0049-3116_S_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J0049-3116_S_uvs.fits wwins /vlbi/uf001/uva//J0049-3116_S_map.win ! wwins: Wrote 4 windows to /vlbi/uf001/uva//J0049-3116_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.127112 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000276891 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.653495 0.653495 1.30699 2.61398 5.22796 10.4559 20.9119 41.8237 83.6474 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.127 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 459.069 quit ! Quitting program ! Log file /vlbi/uf001/uva//J0049-3116_S_dfm.log closed on Sun Jan 13 20:44:06 2019